mirror of
https://github.com/Fishwaldo/open-zwave.git
synced 2025-03-16 20:11:41 +00:00
54 lines
3.6 KiB
XML
54 lines
3.6 KiB
XML
<?xml version="1.0" encoding="utf-8"?>
|
|
<Product xmlns='http://code.google.com/p/open-zwave/'>
|
|
<!-- Zooz ZSE09 Mini Sensor -->
|
|
|
|
<!-- Configuration Parameters -->
|
|
<CommandClass id="112">
|
|
<Value type="byte" genre="config" index="1" label="Motion Sensitivity" size="1" min="8" max="255" value="12">
|
|
<Help>Adjust motion detection sensitivity. Lower number is for higher sensitivity, while higher number os for lower sensitivity. Defaults to 12.</Help>
|
|
</Value>
|
|
<Value type="short" genre="config" index="2" label="Trigger ON Duration" size="2" min="5" max="600" value="30" units="seconds">
|
|
<Help>Set the duration you want the associated device to stay ON after being triggered by the sensor before it automatically turns OFF, in seconds.</Help>
|
|
</Value>
|
|
<Value type="byte" genre="config" index="3" label="Trigger Action" size="1" min="0" max="255" value="255">
|
|
<Help>Configure whether the Mini Sensor turns an associated device on or off when sending the BASIC_SET command. 0 is OFF, 255 is ON, and 1-99 is a percentage of light level. Value of 100-254 is NOT valid.</Help>
|
|
</Value>
|
|
<Value type="list" genre="config" index="4" label="Motion Detection" size="1" min="0" max="255" value="255">
|
|
<Help>Enable or Disable motion detection.</Help>
|
|
<Item label="Disabled" value="0"/>
|
|
<Item label="Enabled" value="255"/>
|
|
</Value>
|
|
<Value type="short" genre="config" index="5" label="Light Trigger Level" size="2" min="0" max="1000" value="100" units="lux">
|
|
<Help>Set light sensor as a secondary trigger for associated devices. If light level in a room falls beyond the set point and motion is detected, the Mini Sensor will send BASIC_SET command to associated devices to turn ON.</Help>
|
|
</Value>
|
|
<Value type="byte" genre="config" index="6" label="Motion Trigger Interval" size="1" min="1" max="8" value="8" units="seconds">
|
|
<Help>Adjust the time when motion is reported again after initial trigger, in seconds.</Help>
|
|
</Value>
|
|
<Value type="short" genre="config" index="7" label="Light Polling Interval" size="2" min="60" max="36000" value="180" units="seconds">
|
|
<Help>How often the Mini Sensor reports light level to the controller and associated devices, in seconds.</Help>
|
|
</Value>
|
|
<Value type="list" genre="config" index="8" label="Light Trigger" size="1" min="0" max="255" value="0">
|
|
<Help>Enable/Disable the light sensor as secondary trigger.</Help>
|
|
<Item label="Disabled" value="0"/>
|
|
<Item label="Enabled" value="255"/>
|
|
</Value>
|
|
<Value type="byte" genre="config" index="9" label="Light Report" size="1" min="0" max="255" value="100" units="lux">
|
|
<Help>Change required to report to the controller, in lux.</Help>
|
|
</Value>
|
|
<Value type="list" genre="config" index="10" label="LED Notification" size="1" min="0" max="1" value="1">
|
|
<Help>Enable or Disable LED Notification.</Help>
|
|
<Item label="Disabled" value="0"/>
|
|
<Item label="Enabled" value="1"/>
|
|
</Value>
|
|
</CommandClass>
|
|
|
|
<!-- Association Groups -->
|
|
<CommandClass id="133">
|
|
<Associations num_groups="4">
|
|
<Group index="1" max_associations="5" label="Lifeline"/>
|
|
<Group index="2" max_associations="5" label="Control Command"/>
|
|
<Group index="3" max_associations="5" label="Notification report"/>
|
|
<Group index="4" max_associations="5" label="Binary sensor report"/>
|
|
</Associations>
|
|
</CommandClass>
|
|
</Product>
|