Merge branch 'master' of git://git.denx.de/u-boot-marvell

2025-03-18 13:11:31 +00:00 · 2015-01-25 19:05:40 -05:00 · 2015-01-25 19:05:40 -05:00 · 03cae7261e
commit 03cae7261e
parent 41ba57d0c7 361b3d8613
11 changed files with 103 additions and 32 deletions
--- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
+++ b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
@ -181,7 +181,7 @@ static void kw_sysrst_check(void)
 #if defined(CONFIG_DISPLAY_CPUINFO)
 int print_cpuinfo(void)
 {
-	char *rev;
+	char *rev = "??";
 	u16 devid = (readl(KW_REG_PCIE_DEVID) >> 16) & 0xffff;
 	u8 revid = readl(KW_REG_PCIE_REVID) & 0xff;

@ -192,7 +192,13 @@ int print_cpuinfo(void)

 	switch (revid) {
 	case 0:
-		rev = "Z0";
+		if (devid == 0x6281)
+			rev = "Z0";
+		else if (devid == 0x6282)
+			rev = "A0";
+		break;
+	case 1:
+		rev = "A1";
 		break;
 	case 2:
 		rev = "A0";
@ -201,7 +207,6 @@ int print_cpuinfo(void)
 		rev = "A1";
 		break;
 	default:
-		rev = "??";
 		break;
 	}

--- a/board/iomega/iconnect/kwbimage.cfg
+++ b/board/iomega/iconnect/kwbimage.cfg
@ -20,7 +20,7 @@ NAND_PAGE_SIZE	0x0800
 # Configure RGMII-0 interface pad voltage to 1.8V
 DATA 0xffd100e0 0x1b1b1b9b

-#Dram initalization for SINGLE x16 CL=5 @ 400MHz
+# Dram initalization for SINGLE x16 CL=5 @ 400MHz
 DATA 0xffd01400 0x43000c30	# DDR Configuration register
 # bit13-0:  0xc30, (3120 DDR2 clks refresh rate)
 # bit23-14: 0x0,
@ -87,7 +87,7 @@ DATA 0xffd0141c 0x00000c52	# DDR Mode
 # bit6-4:   0x4, CL=5
 # bit7:     0x0, TestMode=0 normal
 # bit8:     0x0, DLL reset=0 normal
-# bit11-9:  0x6, auto-precharge write recovery ????????????
+# bit11-9:  0x6, auto-precharge write recovery
 # bit12:    0x0, PD must be zero
 # bit31-13: 0x0, required

--- a/board/raidsonic/ib62x0/kwbimage.cfg
+++ b/board/raidsonic/ib62x0/kwbimage.cfg
@ -11,7 +11,7 @@
 #

 # Boot Media configurations
-BOOT_FROM	nand	# change from nand to uart if building UART image
+BOOT_FROM	nand
 NAND_ECC_MODE	default
 NAND_PAGE_SIZE	0x0800

@ -21,12 +21,12 @@ NAND_PAGE_SIZE	0x0800
 # Configure RGMII-0 interface pad voltage to 1.8V
 DATA 0xffd100e0 0x1b1b1b9b

-#Dram initalization for SINGLE x16 CL=5 @ 400MHz
+# Dram initalization for SINGLE x16 CL=5 @ 400MHz
 DATA 0xffd01400 0x43000c30	# DDR Configuration register
 # bit13-0:  0xc30, (3120 DDR2 clks refresh rate)
 # bit23-14: 0x0,
-# bit24:    0x1,     enable exit self refresh mode on DDR access
-# bit25:    0x1,     required
+# bit24:    0x1,   enable exit self refresh mode on DDR access
+# bit25:    0x1,   required
 # bit29-26: 0x0,
 # bit31-30: 0x1,

@ -64,10 +64,10 @@ DATA 0xffd01410 0x0000000c	# DDR Address Control
 # bit3-2:   11,  Cs0size (1Gb)
 # bit5-4:   00,  Cs1width (x8)
 # bit7-6:   11,  Cs1size (1Gb)
-# bit9-8:   00,  Cs2width (nonexistent
-# bit11-10: 00,  Cs2size  (nonexistent
-# bit13-12: 00,  Cs3width (nonexistent
-# bit15-14: 00,  Cs3size  (nonexistent
+# bit9-8:   00,  Cs2width (nonexistent)
+# bit11-10: 00,  Cs2size (nonexistent)
+# bit13-12: 00,  Cs3width (nonexistent)
+# bit15-14: 00,  Cs3size (nonexistent)
 # bit16:    0,   Cs0AddrSel
 # bit17:    0,   Cs1AddrSel
 # bit18:    0,   Cs2AddrSel
@ -88,7 +88,7 @@ DATA 0xffd0141c 0x00000c52	# DDR Mode
 # bit6-4:   0x4, CL=5
 # bit7:     0x0, TestMode=0 normal
 # bit8:     0x0, DLL reset=0 normal
-# bit11-9:  0x6, auto-precharge write recovery ????????????
+# bit11-9:  0x6, auto-precharge write recovery
 # bit12:    0x0, PD must be zero
 # bit31-13: 0x0, required

@ -148,8 +148,8 @@ DATA 0xffd0149c 0x0000e803	# CPU ODT Control
 DATA 0xffd01480 0x00000001	# DDR Initialization Control
 # bit0: 0x1, enable DDR init upon this register write

-DATA 0xFFD20134 0x66666666      # L2 RAM Timing 0 Register
-DATA 0xFFD20138 0x66666666      # L2 RAM Timing 1 Register
+DATA 0xffd20134 0x66666666	# L2 RAM Timing 0 Register
+DATA 0xffd20138 0x66666666	# L2 RAM Timing 1 Register

 # End of Header extension
 DATA 0x0 0x0
--- a/drivers/net/mvgbe.c
+++ b/drivers/net/mvgbe.c
@ -35,6 +35,10 @@

 DECLARE_GLOBAL_DATA_PTR;

+#ifndef CONFIG_MVGBE_PORTS
+# define CONFIG_MVGBE_PORTS {0, 0}
+#endif
+
 #define MV_PHY_ADR_REQUEST 0xee
 #define MVGBE_SMI_REG (((struct mvgbe_registers *)MVGBE0_BASE)->smi)

--- a/include/configs/dockstar.h
+++ b/include/configs/dockstar.h
@ -12,6 +12,8 @@
 #ifndef _CONFIG_DOCKSTAR_H
 #define _CONFIG_DOCKSTAR_H

+#define CONFIG_SYS_GENERIC_BOARD
+
 /*
 * Version number information
 */
--- a/include/configs/goflexhome.h
+++ b/include/configs/goflexhome.h
@ -15,6 +15,8 @@
 #ifndef _CONFIG_GOFLEXHOME_H
 #define _CONFIG_GOFLEXHOME_H

+#define CONFIG_SYS_GENERIC_BOARD
+
 /*
 * Version number information
 */
--- a/include/configs/guruplug.h
+++ b/include/configs/guruplug.h
@ -1,5 +1,6 @@
 /*
- * (C) Copyright 2009
+ * (C) Copyright 2009-2014
+ * Gerald Kerma <dreagle@doukki.net>
 * Marvell Semiconductor <www.marvell.com>
 * Written-by: Siddarth Gore <gores@marvell.com>
 *
@ -9,6 +10,8 @@
 #ifndef _CONFIG_GURUPLUG_H
 #define _CONFIG_GURUPLUG_H

+#define CONFIG_SYS_GENERIC_BOARD
+
 /*
 * Version number information
 */
@ -22,18 +25,37 @@
 #define CONFIG_MACH_GURUPLUG	/* Machine type */
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */

+/*
+ * Compression configuration
+ */
+#define CONFIG_BZIP2
+#define CONFIG_LZMA
+#define CONFIG_LZO
+
+/*
+ * Enable device tree support
+ */
+#define CONFIG_OF_LIBFDT
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
+
 /*
 * Commands configuration
 */
 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
 #include <config_cmd_default.h>
+#define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ENV
-#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_USB
-#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT

 /*
 * mv-common.h should be defined after CMD configs since it used them
@ -55,24 +77,38 @@
 * it has to be rounded to sector size
 */
 #define CONFIG_ENV_SIZE			0x20000	/* 128k */
-#define CONFIG_ENV_ADDR			0x60000
-#define CONFIG_ENV_OFFSET		0x60000	/* env starts here */
+#define CONFIG_ENV_OFFSET		0xE0000	/* env starts here */

 /*
 * Default environment variables
 */
-#define CONFIG_BOOTCOMMAND		"setenv ethact egiga0; " \
-	"${x_bootcmd_ethernet}; setenv ethact egiga1; " \
-	"${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
-	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; "	\
-	"bootm 0x6400000;"
+#define CONFIG_BOOTCOMMAND \
+	"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; "	\
+	"ubi part root; "						\
+	"ubifsmount ubi:rootfs; "					\
+	"ubifsload 0x800000 ${kernel}; "				\
+	"ubifsload 0x700000 ${fdt}; "					\
+	"ubifsumount; "							\
+	"fdt addr 0x700000; fdt resize; fdt chosen; "			\
+	"bootz 0x800000 - 0x700000"

-#define CONFIG_EXTRA_ENV_SETTINGS	\
-	"x_bootcmd_ethernet=ping 192.168.2.1\0"	\
-	"x_bootcmd_usb=usb start\0"	\
-	"x_bootcmd_kernel=nand read.e 0x6400000 0x100000 0x400000\0" \
-	"x_bootargs=console=ttyS0,115200\0"	\
-	"x_bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
+#define CONFIG_MTDPARTS	\
+	"mtdparts=orion_nand:"						\
+	"896K(uboot),128K(uboot_env),"					\
+	"-@1M(root)\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"console=console=ttyS0,115200\0"				\
+	"mtdids=nand0=orion_nand\0"					\
+	"mtdparts="CONFIG_MTDPARTS					\
+	"kernel=/boot/zImage\0"						\
+	"fdt=/boot/guruplug-server-plus.dtb\0"				\
+	"bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0"
+
+#define MTDIDS_DEFAULT	"nand0=orion_nand"
+
+#define MTDPARTS_DEFAULT	\
+	"mtdparts="CONFIG_MTDPARTS

 /*
 * Ethernet Driver configuration
@ -89,6 +125,20 @@
 #define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
 #endif /*CONFIG_MVSATA_IDE*/

+/*
+ * File system
+ */
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_RBTREE
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+
 #define CONFIG_SYS_ALT_MEMTEST

 #endif /* _CONFIG_GURUPLUG_H */
--- a/include/configs/ib62x0.h
+++ b/include/configs/ib62x0.h
@ -9,6 +9,8 @@
 #ifndef _CONFIG_IB62x0_H
 #define _CONFIG_IB62x0_H

+#define CONFIG_SYS_GENERIC_BOARD
+
 /*
 * Version number information
 */
--- a/include/configs/iconnect.h
+++ b/include/configs/iconnect.h
@ -9,6 +9,8 @@
 #ifndef _CONFIG_ICONNECT_H
 #define _CONFIG_ICONNECT_H

+#define CONFIG_SYS_GENERIC_BOARD
+
 /*
 * Version number information
 */
--- a/include/configs/pogo_e02.h
+++ b/include/configs/pogo_e02.h
@ -13,6 +13,8 @@
 #ifndef _CONFIG_POGO_E02_H
 #define _CONFIG_POGO_E02_H

+#define CONFIG_SYS_GENERIC_BOARD
+
 /*
 * Machine type definition and ID
 */
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@ -10,6 +10,8 @@
 #ifndef _CONFIG_SHEEVAPLUG_H
 #define _CONFIG_SHEEVAPLUG_H

+#define CONFIG_SYS_GENERIC_BOARD
+
 /*
 * Version number information
 */