GitHub-Mirror/u-boot
2
0
Fork 0
mirror of https://github.com/Fishwaldo/u-boot.git synced 2025-03-17 20:51:39 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

arm: mvebu: ClearFog: document boot selection switches, update UART

Browse source 
Signed-off-by: Florian Klink <flokli@flokli.de>
Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Florian Klink 2017-12-23 01:42:48 +01:00 • committed by Stefan Roese
parent 6779d65b9f
commit 0f70d705cf
1 changed files with 17 additions and 4 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

21
board/solidrun/clearfog/README
View file

@ -17,16 +17,29 @@ $ sudo dd if=u-boot-spl.kwb of=/dev/sdX bs=512 seek=1
Please use the correct device node for your setup instead
of "/dev/sdX" here!
Boot selection:
---------------
Before powering up the board, boot selection should be done via the SW1 dip
switch (0: OFF, 1: ON):
- SPI: 00010
- SD/eMMC: 00111
- M.2 SSD: 11100
- UART: 01001 [1]
[1]: According to SolidRun's manual, 11110 should be used for UART booting on
the ClearFog 'Pro' variant.
However, this doesn't work (anymore) at least on Rev. 2.1 (but '01001' as
mentionend for the 'Base' variant does).
Boot from UART:
---------------
Connect the on-board micro-USB (CF Pro: CON11, CF Base: CON5)
to your host.
Set the SW1 DIP switches to UART boot (0: OFF, 1: ON):
ClearFog Base: 01001
ClearFog Pro: 11110
Set the SW1 DIP switches to UART boot (see above).
Run the following command to initiate U-Boot download: