mirror of
https://github.com/Fishwaldo/u-boot.git
synced 2025-03-21 14:41:31 +00:00
Cleanup, update CHANGELOG
Sigend-off-by: Wolfgang Denk <wd@denx.de>
This commit is contained in:
Wolfgang Denk
parent
43f6226db0
commit
2a26ec4732
2 changed files with 497 additions and 3 deletions
493
CHANGELOG
493
CHANGELOG
|
|
@ -65,6 +65,239 @@ Date: Sat Apr 14 21:16:54 2007 +0200
|
||||||
|
|
||||||
Update CHANGELOG
|
Update CHANGELOG
|
||||||
|
|
||||||
|
commit 8e6875183cdca91c134408d119d4abcd48ef6856
|
||||||
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
Date: Sun Dec 17 18:56:46 2006 +0100
|
||||||
|
|
||||||
|
AVR32: Enable MMC support
|
||||||
|
|
||||||
|
Set up the portmux for the MMC interface and enable the MMC driver
|
||||||
|
along with support for DOS partitions, ext2 and FAT filesystems.
|
||||||
|
|
||||||
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
|
||||||
|
commit fc26c97bb6df41b4a95662c34054fe912387bf38
|
||||||
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
Date: Fri Jan 20 10:03:53 2006 +0100
|
||||||
|
|
||||||
|
Atmel MCI driver
|
||||||
|
|
||||||
|
Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
|
||||||
|
|
||||||
|
The AT91 ARM-based CPUs use basically the same hardware, so it should
|
||||||
|
be possible to share this driver, but no effort has been made so far.
|
||||||
|
|
||||||
|
Hardware documentation can be found in the AT32AP7000 data sheet,
|
||||||
|
which can be downloaded from
|
||||||
|
|
||||||
|
http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
|
||||||
|
|
||||||
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
|
||||||
|
commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
|
||||||
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
Date: Sun Dec 17 18:55:37 2006 +0100
|
||||||
|
|
||||||
|
AVR32: Add clk and gpio infrastructure for mmci
|
||||||
|
|
||||||
|
Implement functions for configuring the mmci pins, as well as
|
||||||
|
functions for getting the clock rate of the mmci controller.
|
||||||
|
|
||||||
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
|
||||||
|
commit 7fac3f69e9f05c5e5326681976c35d129324c4de
|
||||||
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
Date: Sun Dec 17 18:53:56 2006 +0100
|
||||||
|
|
||||||
|
Enable partition support with MMC
|
||||||
|
|
||||||
|
Include implementations of init_part() and get_partition_info() when
|
||||||
|
CONFIG_MMC is set.
|
||||||
|
|
||||||
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
|
||||||
|
commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
|
||||||
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
Date: Sun Dec 17 17:14:30 2006 +0100
|
||||||
|
|
||||||
|
AVR32: Enable networking
|
||||||
|
|
||||||
|
Implement MACB initialization for AVR32 and ATSTK1000, and turn
|
||||||
|
everything on, including the MACB driver.
|
||||||
|
|
||||||
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
|
||||||
|
commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
|
||||||
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
Date: Fri Jan 20 10:03:34 2006 +0100
|
||||||
|
|
||||||
|
Atmel MACB ethernet driver
|
||||||
|
|
||||||
|
Driver for the Atmel MACB on-chip ethernet controller.
|
||||||
|
|
||||||
|
This driver has been tested on the ATSTK1000 board with a AT32AP7000
|
||||||
|
CPU. It should probably work on AT91SAM926x as well with some minor
|
||||||
|
modifications.
|
||||||
|
|
||||||
|
Hardware documentation can be found in the AT32AP7000 data sheet,
|
||||||
|
which can be downloaded from
|
||||||
|
|
||||||
|
http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
|
||||||
|
|
||||||
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
|
||||||
|
commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
|
||||||
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
Date: Sun Dec 17 16:56:14 2006 +0100
|
||||||
|
|
||||||
|
AVR32: Add clk and gpio infrastructure for macb0 and macb1
|
||||||
|
|
||||||
|
Implement functions for configuring the macb0 and macb1 pins, as
|
||||||
|
well as functions for getting the clock rate of the various
|
||||||
|
busses the macb ethernet controllers are connected to.
|
||||||
|
|
||||||
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
|
||||||
|
commit d5acb95b16a0a74c643524342c3437e765426d05
|
||||||
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
Date: Sun Dec 17 15:39:15 2006 +0100
|
||||||
|
|
||||||
|
AVR32: Implement simple DMA memory allocator
|
||||||
|
|
||||||
|
Implement dma_alloc_coherent() which returns cache-aligned
|
||||||
|
uncacheable memory.
|
||||||
|
|
||||||
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
|
||||||
|
commit 91975b0fea773c9e681fea8cf3349669f27685ee
|
||||||
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
Date: Sun Dec 17 15:46:02 2006 +0100
|
||||||
|
|
||||||
|
Import <linux/mii.h> from the Linux kernel
|
||||||
|
|
||||||
|
Instead of creating yet another set of MII register definitions
|
||||||
|
in the macb driver, here's a complete set of definitions for everyone
|
||||||
|
to use.
|
||||||
|
|
||||||
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
|
||||||
|
commit 1b804b229556a4d862da93c0ec94e79419364b2c
|
||||||
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
Date: Wed Mar 21 19:47:36 2007 +0100
|
||||||
|
|
||||||
|
AVR32: Include more commands for ATSTK1000
|
||||||
|
|
||||||
|
Include the imi, imls and jffs commands sets by default on ATSTK1000.
|
||||||
|
Also define CONFIG_BOOTARGS to something more useful, define
|
||||||
|
CONFIG_BOOTCOMMAND and enable autoboot by default.
|
||||||
|
|
||||||
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
|
||||||
|
commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
|
||||||
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
Date: Wed Mar 21 19:44:48 2007 +0100
|
||||||
|
|
||||||
|
AVR32: Provide a definition of struct stat
|
||||||
|
|
||||||
|
Copy the definition of struct stat from the Linux kernel.
|
||||||
|
|
||||||
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
|
||||||
|
commit 12f099c08167a7a51aeee623bc16dafd0841271c
|
||||||
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
Date: Sun Dec 17 14:46:06 2006 +0100
|
||||||
|
|
||||||
|
AVR32: Use initdram() instead of board_init_memories()
|
||||||
|
|
||||||
|
Conform to the "standard" interface and use initdram() instead of
|
||||||
|
board_init_memories() on AVR32. This enables us to get rid of the
|
||||||
|
sdram_size member of the global_data struct as well.
|
||||||
|
|
||||||
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
|
||||||
|
commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
|
||||||
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
Date: Mon Nov 20 15:53:10 2006 +0100
|
||||||
|
|
||||||
|
AVR32: Relocate u-boot to SDRAM
|
||||||
|
|
||||||
|
Relocate the u-boot image into SDRAM like everyone else does. This
|
||||||
|
means that we can handle much larger .data and .bss than we used to.
|
||||||
|
|
||||||
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
|
||||||
|
commit df548d3c3e2bbc40258713167859ffc2ce99a900
|
||||||
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
Date: Sun Nov 19 18:06:53 2006 +0100
|
||||||
|
|
||||||
|
AVR32: Resource management rewrite
|
||||||
|
|
||||||
|
Rewrite the resource management code (i.e. I/O memory, clock gating,
|
||||||
|
gpio) so it doesn't depend on any global state. This is necessary
|
||||||
|
because this code is heavily used before relocation to RAM, so we
|
||||||
|
can't write to any global variables.
|
||||||
|
|
||||||
|
As an added bonus, this makes u-boot's memory footprint a bit smaller,
|
||||||
|
although some functionality has been left out; all clocks are enabled
|
||||||
|
all the time, and there's no checking for gpio line conflicts.
|
||||||
|
|
||||||
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
|
||||||
|
commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
|
||||||
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
Date: Sat Nov 18 18:01:13 2006 +0100
|
||||||
|
|
||||||
|
AVR32: Clean up memory-map.h for at32ap7000
|
||||||
|
|
||||||
|
Convert spaces to tabs (must have missed this one last time around),
|
||||||
|
sort the entries by address and group them together by bus
|
||||||
|
connectivity.
|
||||||
|
|
||||||
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
|
||||||
|
commit 28c699ef69f4b6cdf252e4747b7b590028a88981
|
||||||
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
Date: Sat Nov 18 17:32:31 2006 +0100
|
||||||
|
|
||||||
|
AVR32: Build position-independent u-boot
|
||||||
|
|
||||||
|
Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
|
||||||
|
position independent. This will make relocation a lot easier.
|
||||||
|
|
||||||
|
-mno-init-got means that gcc shouldn't emit code to load the GOT
|
||||||
|
address into r6 in every function prologue. We do it once and for
|
||||||
|
all in the early startup assembly code, so enabling this option
|
||||||
|
makes u-boot a bit faster and smaller.
|
||||||
|
|
||||||
|
The assembly parts have always been position-independent, so no code
|
||||||
|
changes should be necessary.
|
||||||
|
|
||||||
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
|
||||||
|
commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
|
||||||
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
Date: Sat Nov 18 17:24:31 2006 +0100
|
||||||
|
|
||||||
|
AVR32: Use avr32-linux- cross-compilation prefix by default
|
||||||
|
|
||||||
|
It doesn't really matter which toolchain you use to compile u-boot,
|
||||||
|
but the avr32-linux one is probably what most people have installed.
|
||||||
|
|
||||||
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
|
||||||
|
commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
|
||||||
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
Date: Sat Nov 18 17:15:30 2006 +0100
|
||||||
|
|
||||||
|
AVR32: Split start_u_boot into board_init_f and board_init_r
|
||||||
|
|
||||||
|
Split the avr32 initialization code into a function to run before
|
||||||
|
relocation, board_init_f and a function to run after relocation,
|
||||||
|
board_init_r. For now, board_init_f simply calls board_init_r
|
||||||
|
at the end.
|
||||||
|
|
||||||
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||||
|
|
||||||
commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
|
commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
|
||||||
Author: Heiko Schocher <hs@pollux.denx.de>
|
Author: Heiko Schocher <hs@pollux.denx.de>
|
||||||
Date: Sat Apr 14 05:26:48 2007 +0200
|
Date: Sat Apr 14 05:26:48 2007 +0200
|
||||||
|
|
@ -843,6 +1076,12 @@ Date: Tue Mar 6 07:47:04 2007 +0100
|
||||||
|
|
||||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||||
|
|
||||||
|
commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
|
||||||
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
||||||
|
Date: Sun Mar 4 01:36:05 2007 +0100
|
||||||
|
|
||||||
|
Some code cleanup.
|
||||||
|
|
||||||
commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
|
commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
|
||||||
Author: Kim Phillips <kim.phillips@freescale.com>
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
||||||
Date: Wed Feb 28 00:02:04 2007 -0600
|
Date: Wed Feb 28 00:02:04 2007 -0600
|
||||||
|
|
@ -1714,6 +1953,15 @@ Date: Tue Jan 23 13:25:22 2007 +0100
|
||||||
[ColdFire MCF5271 family] Add CPU detection based on the value of Chip
|
[ColdFire MCF5271 family] Add CPU detection based on the value of Chip
|
||||||
Identification Register (CIR).
|
Identification Register (CIR).
|
||||||
|
|
||||||
|
commit fdef388758506765d4d6a7155c8f1584c63ff581
|
||||||
|
Author: roy zang <tie-fei.zang@freescale.com>
|
||||||
|
Date: Mon Jan 22 13:19:21 2007 +0800
|
||||||
|
|
||||||
|
use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
|
||||||
|
The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
|
||||||
|
fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
|
||||||
|
mpc7448hpc2 board.
|
||||||
|
|
||||||
commit a4012396645533aef218354eeba754dff0deace8
|
commit a4012396645533aef218354eeba754dff0deace8
|
||||||
Author: Wolfgang Denk <wd@pollux.denx.de>
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
||||||
Date: Fri Jan 19 23:08:39 2007 +0100
|
Date: Fri Jan 19 23:08:39 2007 +0100
|
||||||
|
|
@ -2129,6 +2377,72 @@ Date: Fri Dec 8 16:23:08 2006 +0100
|
||||||
|
|
||||||
automatic update mechanism
|
automatic update mechanism
|
||||||
|
|
||||||
|
commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
|
||||||
|
Author: roy zang <tie-fei.zang@freescale.com>
|
||||||
|
Date: Mon Dec 4 17:56:59 2006 +0800
|
||||||
|
|
||||||
|
Slight code clean up.
|
||||||
|
Add comments, delete duplicate define and remove spaces.
|
||||||
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
||||||
|
|
||||||
|
commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
|
||||||
|
Author: roy zang <tie-fei.zang@freescale.com>
|
||||||
|
Date: Mon Dec 4 17:54:21 2006 +0800
|
||||||
|
|
||||||
|
Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
|
||||||
|
multiplier table can not refect the real PLL clock behavior of these
|
||||||
|
processors. Please refer to the hardware specification for detailed
|
||||||
|
information of the corresponding processors.
|
||||||
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
||||||
|
|
||||||
|
commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
|
||||||
|
Author: roy zang <tie-fei.zang@freescale.com>
|
||||||
|
Date: Mon Dec 4 14:46:23 2006 +0800
|
||||||
|
|
||||||
|
Remove the static MAC address, ip address, server ip, netmask and
|
||||||
|
gateway ip for network setting.
|
||||||
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
||||||
|
|
||||||
|
commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
|
||||||
|
Author: roy zang <tie-fei.zang@freescale.com>
|
||||||
|
Date: Mon Dec 4 14:33:08 2006 +0800
|
||||||
|
|
||||||
|
Remove the duplicate memory test code for mpc744ihpc2 board.
|
||||||
|
If a memory test is needed, please use the functions in
|
||||||
|
post/memory.c or memtest command.
|
||||||
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
||||||
|
|
||||||
|
commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
|
||||||
|
Author: roy zang <tie-fei.zang@freescale.com>
|
||||||
|
Date: Fri Dec 1 19:01:25 2006 +0800
|
||||||
|
|
||||||
|
Fix the exception occuring in RAM table search issue.
|
||||||
|
The original search_one_table() function code can only processes the search
|
||||||
|
for the exception occurring in FLASH/ROM, because the exception and fixup
|
||||||
|
table usually locate in FLASH. If the exception address is also in
|
||||||
|
FLASH, it will be OK.
|
||||||
|
If the exception occurs in RAM, after the u-boot relocation, a
|
||||||
|
relocation offset should be added.
|
||||||
|
|
||||||
|
clean up the code in cpu/74xx_7xx/cpu.c
|
||||||
|
|
||||||
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
||||||
|
|
||||||
|
commit ee311214e0d216f904feea269599d0934bf71f23
|
||||||
|
Author: roy zang <tie-fei.zang@freescale.com>
|
||||||
|
Date: Fri Dec 1 11:47:36 2006 +0800
|
||||||
|
|
||||||
|
Clean up the code according to codestyle:
|
||||||
|
(1) remove some C++ comments.
|
||||||
|
(2) remove trailing white space.
|
||||||
|
(3) remove trailing empty line.
|
||||||
|
(4) Indentation by table.
|
||||||
|
(5) remove {} in one line condition.
|
||||||
|
(6) add space before '(' in function call.
|
||||||
|
Remove some weird printf () output.
|
||||||
|
Add necessary comments.
|
||||||
|
Modified Makefile to support building in a separate directory.
|
||||||
|
|
||||||
commit dd520bf314c7add4183c5191692180f576f96b60
|
commit dd520bf314c7add4183c5191692180f576f96b60
|
||||||
Author: Wolfgang Denk <wd@pollux.denx.de>
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
||||||
Date: Thu Nov 30 18:02:20 2006 +0100
|
Date: Thu Nov 30 18:02:20 2006 +0100
|
||||||
|
|
@ -2835,12 +3149,191 @@ Date: Thu Sep 7 07:39:46 2006 -0700
|
||||||
|
|
||||||
Signed-off-by: Nick Spence <nick.spence@freescale.com>
|
Signed-off-by: Nick Spence <nick.spence@freescale.com>
|
||||||
|
|
||||||
|
commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
|
||||||
|
Author: roy zang <tie-fei.zang@freescale.com>
|
||||||
|
Date: Fri Nov 3 13:10:00 2006 +0800
|
||||||
|
|
||||||
|
Remove some unused CFG define.
|
||||||
|
undef CFG_DRAM_TEST
|
||||||
|
|
||||||
|
commit 99c09c4dec34f77c243bf51bea532e3f339410ad
|
||||||
|
Author: roy zang <tie-fei.zang@freescale.com>
|
||||||
|
Date: Fri Nov 3 13:07:36 2006 +0800
|
||||||
|
|
||||||
|
Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
|
||||||
|
Both work. 0xFF000000 seems more reasonable.
|
||||||
|
|
||||||
commit c59200443072353044aa4bf737a5a60f9a9af231
|
commit c59200443072353044aa4bf737a5a60f9a9af231
|
||||||
Author: Wolfgang Denk <wd@pollux.denx.de>
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
||||||
Date: Thu Nov 2 15:15:01 2006 +0100
|
Date: Thu Nov 2 15:15:01 2006 +0100
|
||||||
|
|
||||||
Release U-Boot 1.1.6
|
Release U-Boot 1.1.6
|
||||||
|
|
||||||
|
commit c1fbe4103a0d6c8957f912af902d705ba67836f2
|
||||||
|
Author: roy zang <tie-fei.zang@freescale.com>
|
||||||
|
Date: Thu Nov 2 19:14:48 2006 +0800
|
||||||
|
|
||||||
|
This patch comes from Yuli's posted patch on 8/8/2006
|
||||||
|
titled "CFI Driver Little-Endian write Issue".
|
||||||
|
|
||||||
|
http://sourceforge.net/mailarchive/message.php?msg_id=36311999
|
||||||
|
|
||||||
|
If that patch applied, please discard this one.
|
||||||
|
Until now , I do not see his patch is applied. So please apply this one.
|
||||||
|
|
||||||
|
Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
|
||||||
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
||||||
|
|
||||||
|
commit b825f158e449e1e9cf74c08e572955e122394c96
|
||||||
|
Author: roy zang <tie-fei.zang@freescale.com>
|
||||||
|
Date: Thu Nov 2 19:12:31 2006 +0800
|
||||||
|
|
||||||
|
Tsi108 on chip i2c support.
|
||||||
|
|
||||||
|
The i2c Interface provides a master-only, serial interface that can be
|
||||||
|
used for initializing Tsi108/Tsi109 registers from an EEPROM after a
|
||||||
|
device reset.
|
||||||
|
|
||||||
|
Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
|
||||||
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
||||||
|
|
||||||
|
commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
|
||||||
|
Author: roy zang <tie-fei.zang@freescale.com>
|
||||||
|
Date: Thu Nov 2 19:11:06 2006 +0800
|
||||||
|
|
||||||
|
Tsi108 on chip pci controller support.
|
||||||
|
|
||||||
|
If there is no pci card, the tsi108/109 pci configure read will
|
||||||
|
cause a machine check exception to the processor. PCI error should
|
||||||
|
also be cleared after the read.
|
||||||
|
|
||||||
|
Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
|
||||||
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
||||||
|
|
||||||
|
commit d1927cee977126e547ceeba23e4f978f377cfb8f
|
||||||
|
Author: roy zang <tie-fei.zang@freescale.com>
|
||||||
|
Date: Thu Nov 2 19:08:55 2006 +0800
|
||||||
|
|
||||||
|
Tundra tsi108 on chip Ethernet controller support.
|
||||||
|
|
||||||
|
The following is a brief description of the Ethernet controller:
|
||||||
|
The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
|
||||||
|
Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
|
||||||
|
to manage the two physical connection devices (PHYs). Each Ethernet port
|
||||||
|
has its own statistics monitor that tracks and reports key interface
|
||||||
|
statistics. Each port supports a 256-entry hash table for address
|
||||||
|
filtering. In addition, each port is bridged to the Switch Fabric
|
||||||
|
through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
|
||||||
|
|
||||||
|
Each Ethernet port also has a pair of internal Ethernet DMA channels to
|
||||||
|
support the transmit and receive data flows. The Ethernet DMA channels
|
||||||
|
use descriptors set up in memory, the memory map of the device, and
|
||||||
|
access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
|
||||||
|
handles arbitration for the Switch Fabric. The Controller also
|
||||||
|
has a register businterface for register accesses and status monitor
|
||||||
|
control.
|
||||||
|
|
||||||
|
The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
|
||||||
|
modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
|
||||||
|
The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
|
||||||
|
data flows to and from the Ethernet Controller through the Switch Fabric.
|
||||||
|
|
||||||
|
Each Ethernet port uses its transmit and receive DMA channels to manage
|
||||||
|
data flows through buffer descriptors that are predefined by the
|
||||||
|
system (the descriptors can exist anywhere in the system memory map).
|
||||||
|
These descriptors are data structures that point to buffers filled
|
||||||
|
with data ready to transmit over Ethernet, or they point to empty
|
||||||
|
buffers ready to receive data from Ethernet.
|
||||||
|
|
||||||
|
Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
|
||||||
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
||||||
|
|
||||||
|
commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
|
||||||
|
Author: roy zang <tie-fei.zang@freescale.com>
|
||||||
|
Date: Thu Nov 2 19:01:33 2006 +0800
|
||||||
|
|
||||||
|
Tundra tsi108 header file.
|
||||||
|
|
||||||
|
The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
|
||||||
|
PowerPC processors that offers numerous system interconnect options for
|
||||||
|
embedded application designers. The Tsi108 can interconnect 60x or
|
||||||
|
MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
|
||||||
|
and Flash. Provided the macro define for tsi108 chip.
|
||||||
|
|
||||||
|
Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
|
||||||
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
||||||
|
|
||||||
|
commit 87c4db09699c6b89176b31004afcb83eb1585d47
|
||||||
|
Author: roy zang <tie-fei.zang@freescale.com>
|
||||||
|
Date: Thu Nov 2 18:59:15 2006 +0800
|
||||||
|
|
||||||
|
Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
|
||||||
|
mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
|
||||||
|
|
||||||
|
Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
|
||||||
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
||||||
|
|
||||||
|
commit 27801b8ab11c61b577e45742a515bb3b23b80241
|
||||||
|
Author: roy zang <tie-fei.zang@freescale.com>
|
||||||
|
Date: Thu Nov 2 18:57:21 2006 +0800
|
||||||
|
|
||||||
|
Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
|
||||||
|
Make ,config.mk and link file for the mpc7448hpc2 board.
|
||||||
|
|
||||||
|
Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
|
||||||
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
||||||
|
|
||||||
|
commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
|
||||||
|
Author: roy zang <tie-fei.zang@freescale.com>
|
||||||
|
Date: Thu Nov 2 18:55:04 2006 +0800
|
||||||
|
|
||||||
|
Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
|
||||||
|
The mpc7448hpc2 board support header file.
|
||||||
|
|
||||||
|
Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
|
||||||
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
||||||
|
|
||||||
|
commit 625bb5ddb50b243f931262ca8c46956409471917
|
||||||
|
Author: roy zang <tie-fei.zang@freescale.com>
|
||||||
|
Date: Thu Nov 2 18:52:21 2006 +0800
|
||||||
|
|
||||||
|
Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
|
||||||
|
The mpc7448hpc2 board support low level assemble language init code.
|
||||||
|
|
||||||
|
Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
|
||||||
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
||||||
|
|
||||||
|
commit 4c52783b3d024e153c4972b97332e314bc3bdc46
|
||||||
|
Author: roy zang <tie-fei.zang@freescale.com>
|
||||||
|
Date: Thu Nov 2 18:49:51 2006 +0800
|
||||||
|
|
||||||
|
General code modification for mpc7448hpc2 board support.
|
||||||
|
1. Add 7447A and 7448 processor support.
|
||||||
|
2. Add the following flags.
|
||||||
|
|
||||||
|
CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
|
||||||
|
(such as by switch on board), this flag should be set.
|
||||||
|
|
||||||
|
CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
|
||||||
|
relocates to RAM, this flag should be set.
|
||||||
|
|
||||||
|
CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
|
||||||
|
system hang in exception, this flag should be set.
|
||||||
|
|
||||||
|
There is a design issue for tsi108/109 pci configure read. When pci scan
|
||||||
|
the slots, if there is no pci card, the tsi108/9 will cause a machine
|
||||||
|
check exception for mpc7448 processor.
|
||||||
|
|
||||||
|
Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
|
||||||
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
||||||
|
|
||||||
|
commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
|
||||||
|
Author: roy zang <tie-fei.zang@freescale.com>
|
||||||
|
Date: Thu Nov 2 18:34:47 2006 +0800
|
||||||
|
|
||||||
|
Add README file for mpc7448hpc2 board.
|
||||||
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
||||||
|
|
||||||
commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
|
commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
|
||||||
Author: Bartlomiej Sieka <tur@semihalf.com>
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
||||||
Date: Wed Nov 1 02:04:38 2006 +0100
|
Date: Wed Nov 1 02:04:38 2006 +0100
|
||||||
|
|
|
||||||
|
|
@ -35,8 +35,8 @@ COBJS = 3c589.o 5701rls.o ali512x.o atmel_usart.o \
|
||||||
lan91c96.o macb.o \
|
lan91c96.o macb.o \
|
||||||
natsemi.o ne2000.o netarm_eth.o netconsole.o \
|
natsemi.o ne2000.o netarm_eth.o netconsole.o \
|
||||||
ns16550.o ns8382x.o ns87308.o ns7520_eth.o omap1510_i2c.o \
|
ns16550.o ns8382x.o ns87308.o ns7520_eth.o omap1510_i2c.o \
|
||||||
omap24xx_i2c.o pci.o pci_auto.o pci_indirect.o tsi108_pci.o\
|
omap24xx_i2c.o pci.o pci_auto.o pci_indirect.o \
|
||||||
tsi108_i2c.o pcnet.o plb2800_eth.o \
|
pcnet.o plb2800_eth.o \
|
||||||
ps2ser.o ps2mult.o pc_keyb.o \
|
ps2ser.o ps2mult.o pc_keyb.o \
|
||||||
rtl8019.o rtl8139.o rtl8169.o \
|
rtl8019.o rtl8139.o rtl8169.o \
|
||||||
s3c4510b_eth.o s3c4510b_uart.o \
|
s3c4510b_eth.o s3c4510b_uart.o \
|
||||||
|
|
@ -45,7 +45,8 @@ COBJS = 3c589.o 5701rls.o ali512x.o atmel_usart.o \
|
||||||
serial_pl010.o serial_pl011.o serial_xuartlite.o \
|
serial_pl010.o serial_pl011.o serial_xuartlite.o \
|
||||||
sl811_usb.o sm501.o smc91111.o smiLynxEM.o \
|
sl811_usb.o sm501.o smc91111.o smiLynxEM.o \
|
||||||
status_led.o sym53c8xx.o systemace.o ahci.o \
|
status_led.o sym53c8xx.o systemace.o ahci.o \
|
||||||
ti_pci1410a.o tigon3.o tsec.o tsi108_eth.o\
|
ti_pci1410a.o tigon3.o tsec.o \
|
||||||
|
tsi108_eth.o tsi108_i2c.o tsi108_pci.o \
|
||||||
usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
|
usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
|
||||||
videomodes.o w83c553f.o \
|
videomodes.o w83c553f.o \
|
||||||
ks8695eth.o \
|
ks8695eth.o \
|
||||||
|
|
|
||||||
Loading…
Add table
Reference in a new issue