Merge git://git.denx.de/u-boot-socfpga

Conflicts:
	include/configs/axs101.h

Signed-off-by: Tom Rini <trini@konsulko.com>

arch/arm/dts/socfpga_cyclone5_socdk.dts

@@ -34,6 +34,10 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+	};
 };
 
 &gmac1 {

arch/arm/mach-socfpga/include/mach/reset_manager.h

@@ -65,12 +65,13 @@ struct socfpga_reset_manager {
  */
 #define RSTMGR_EMAC0		RSTMGR_DEFINE(1, 0)
 #define RSTMGR_EMAC1		RSTMGR_DEFINE(1, 1)
+#define RSTMGR_NAND		RSTMGR_DEFINE(1, 4)
+#define RSTMGR_QSPI		RSTMGR_DEFINE(1, 5)
 #define RSTMGR_L4WD0		RSTMGR_DEFINE(1, 6)
 #define RSTMGR_OSC1TIMER0	RSTMGR_DEFINE(1, 8)
 #define RSTMGR_UART0		RSTMGR_DEFINE(1, 16)
 #define RSTMGR_SPIM0		RSTMGR_DEFINE(1, 18)
 #define RSTMGR_SPIM1		RSTMGR_DEFINE(1, 19)
-#define RSTMGR_QSPI		RSTMGR_DEFINE(1, 5)
 #define RSTMGR_SDMMC		RSTMGR_DEFINE(1, 22)
 #define RSTMGR_DMA		RSTMGR_DEFINE(1, 28)
 #define RSTMGR_SDR		RSTMGR_DEFINE(1, 29)

arch/arm/mach-socfpga/misc.c

@@ -54,14 +54,23 @@ void enable_caches(void)
 
 void v7_outer_cache_enable(void)
 {
-	/* disable the L2 cache */
+	/* Disable the L2 cache */
-	writel(0, &pl310->pl310_ctrl);
+	clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
 
 	/* enable BRESP, instruction and data prefetch, full line of zeroes */
 	setbits_le32(&pl310->pl310_aux_ctrl,
 		     L310_AUX_CTRL_DATA_PREFETCH_MASK |
 		     L310_AUX_CTRL_INST_PREFETCH_MASK |
 		     L310_SHARED_ATT_OVERRIDE_ENABLE);
+
+	/* Enable the L2 cache */
+	setbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
+}
+
+void v7_outer_cache_disable(void)
+{
+	/* Disable the L2 cache */
+	clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
 }
 
 /*
@@ -350,6 +359,10 @@ int arch_early_init_r(void)
 	socfpga_per_reset(SOCFPGA_RESET(SPIM1), 0);
 #endif
 
+#ifdef CONFIG_NAND_DENALI
+	socfpga_per_reset(SOCFPGA_RESET(NAND), 0);
+#endif
+
 	return 0;
 }
 

arch/arm/mach-socfpga/spl.c

@@ -40,6 +40,7 @@ u32 spl_boot_device(void)
 		return BOOT_DEVICE_RAM;
 	case 0x2:	/* NAND Flash (1.8V) */
 	case 0x3:	/* NAND Flash (3.0V) */
+		socfpga_per_reset(SOCFPGA_RESET(NAND), 0);
 		return BOOT_DEVICE_NAND;
 	case 0x4:	/* SD/MMC External Transceiver (1.8V) */
 	case 0x5:	/* SD/MMC Internal Transceiver (3.0V) */

board/altera/cyclone5-socdk/qts/pinmux_config.h

@@ -9,19 +9,19 @@
 
 const u8 sys_mgr_init_table[] = {
 	3, /* EMACIO0 */
-	3, /* EMACIO1 */
+	2, /* EMACIO1 */
-	3, /* EMACIO2 */
+	2, /* EMACIO2 */
-	3, /* EMACIO3 */
+	2, /* EMACIO3 */
-	3, /* EMACIO4 */
+	2, /* EMACIO4 */
-	3, /* EMACIO5 */
+	2, /* EMACIO5 */
-	3, /* EMACIO6 */
+	2, /* EMACIO6 */
-	3, /* EMACIO7 */
+	2, /* EMACIO7 */
-	3, /* EMACIO8 */
+	2, /* EMACIO8 */
 	3, /* EMACIO9 */
-	3, /* EMACIO10 */
+	2, /* EMACIO10 */
-	3, /* EMACIO11 */
+	2, /* EMACIO11 */
-	3, /* EMACIO12 */
+	2, /* EMACIO12 */
-	3, /* EMACIO13 */
+	2, /* EMACIO13 */
 	0, /* EMACIO14 */
 	0, /* EMACIO15 */
 	0, /* EMACIO16 */
@@ -55,8 +55,8 @@ const u8 sys_mgr_init_table[] = {
 	0, /* GENERALIO12 */
 	2, /* GENERALIO13 */
 	2, /* GENERALIO14 */
-	0, /* GENERALIO15 */
+	3, /* GENERALIO15 */
-	0, /* GENERALIO16 */
+	3, /* GENERALIO16 */
 	2, /* GENERALIO17 */
 	2, /* GENERALIO18 */
 	0, /* GENERALIO19 */
@@ -72,27 +72,27 @@ const u8 sys_mgr_init_table[] = {
 	0, /* GENERALIO29 */
 	0, /* GENERALIO30 */
 	0, /* GENERALIO31 */
-	0, /* MIXED1IO0 */
+	2, /* MIXED1IO0 */
-	1, /* MIXED1IO1 */
+	2, /* MIXED1IO1 */
-	1, /* MIXED1IO2 */
+	2, /* MIXED1IO2 */
-	1, /* MIXED1IO3 */
+	2, /* MIXED1IO3 */
-	1, /* MIXED1IO4 */
+	2, /* MIXED1IO4 */
-	0, /* MIXED1IO5 */
+	2, /* MIXED1IO5 */
-	0, /* MIXED1IO6 */
+	2, /* MIXED1IO6 */
-	0, /* MIXED1IO7 */
+	2, /* MIXED1IO7 */
-	1, /* MIXED1IO8 */
+	2, /* MIXED1IO8 */
-	1, /* MIXED1IO9 */
+	2, /* MIXED1IO9 */
-	1, /* MIXED1IO10 */
+	2, /* MIXED1IO10 */
-	1, /* MIXED1IO11 */
+	2, /* MIXED1IO11 */
-	0, /* MIXED1IO12 */
+	2, /* MIXED1IO12 */
-	0, /* MIXED1IO13 */
+	2, /* MIXED1IO13 */
 	0, /* MIXED1IO14 */
-	1, /* MIXED1IO15 */
+	3, /* MIXED1IO15 */
-	1, /* MIXED1IO16 */
+	3, /* MIXED1IO16 */
-	1, /* MIXED1IO17 */
+	3, /* MIXED1IO17 */
-	1, /* MIXED1IO18 */
+	3, /* MIXED1IO18 */
-	0, /* MIXED1IO19 */
+	3, /* MIXED1IO19 */
-	0, /* MIXED1IO20 */
+	3, /* MIXED1IO20 */
 	0, /* MIXED1IO21 */
 	0, /* MIXED2IO0 */
 	0, /* MIXED2IO1 */

board/altera/cyclone5-socdk/qts/pll_config.h

@@ -14,7 +14,7 @@
 #define CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT 0
 #define CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT 0
 #define CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT 0
-#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT 511
+#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT 3
 #define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT 511
 #define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT 15
 #define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK 1
@@ -31,7 +31,7 @@
 #define CONFIG_HPS_PERPLLGRP_VCO_NUMER 79
 #define CONFIG_HPS_PERPLLGRP_VCO_PSRC 0
 #define CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT 3
-#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT 511
+#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT 3
 #define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT 511
 #define CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT 4
 #define CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT 4

board/spear/spear600/spear600.c

@@ -48,9 +48,6 @@ int board_eth_init(bd_t *bis)
 
 #if defined(CONFIG_ETH_DESIGNWARE)
 	u32 interface = PHY_INTERFACE_MODE_MII;
-#if defined(CONFIG_DW_AUTONEG)
-	interface = PHY_INTERFACE_MODE_GMII;
-#endif
 	if (designware_initialize(CONFIG_SPEAR_ETHBASE, interface) >= 0)
 		ret++;
 #endif

configs/socfpga_arria5_defconfig

@@ -11,6 +11,7 @@ CONFIG_SPL_STACK_R=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
+CONFIG_SPL_SIMPLE_BUS=y
 CONFIG_DWAPB_GPIO=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y
@@ -23,3 +24,4 @@ CONFIG_DESIGNWARE_SPI=y
 CONFIG_DM_MMC=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set

configs/socfpga_cyclone5_defconfig

@@ -11,6 +11,7 @@ CONFIG_SPL_STACK_R=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
+CONFIG_SPL_SIMPLE_BUS=y
 CONFIG_DWAPB_GPIO=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y
@@ -23,3 +24,4 @@ CONFIG_DESIGNWARE_SPI=y
 CONFIG_DM_MMC=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set

configs/socfpga_sr1500_defconfig

@@ -17,3 +17,4 @@ CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_SYS_NS16550=y
 CONFIG_DM_MMC=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set

drivers/net/Kconfig

@@ -88,6 +88,7 @@ config ETH_SANDBOX_RAW
 
 config ETH_DESIGNWARE
 	bool "Synopsys Designware Ethernet MAC"
+	select PHYLIB
 	help
 	  This MAC is present in SoCs from various vendors. It supports
 	  100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to

drivers/net/designware.c

@@ -22,10 +22,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if !defined(CONFIG_PHYLIB)
-# error "DesignWare Ether MAC requires PHYLIB - missing CONFIG_PHYLIB"
-#endif
-
 static int dw_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
 {
 	struct eth_mac_regs *mac_p = bus->priv;
@@ -107,8 +103,8 @@ static void tx_descs_init(struct dw_eth_dev *priv)
 
 #if defined(CONFIG_DW_ALTDESCRIPTOR)
 		desc_p->txrx_status &= ~(DESC_TXSTS_TXINT | DESC_TXSTS_TXLAST |
-				DESC_TXSTS_TXFIRST | DESC_TXSTS_TXCRCDIS | \
+				DESC_TXSTS_TXFIRST | DESC_TXSTS_TXCRCDIS |
-				DESC_TXSTS_TXCHECKINSCTRL | \
+				DESC_TXSTS_TXCHECKINSCTRL |
 				DESC_TXSTS_TXRINGEND | DESC_TXSTS_TXPADDIS);
 
 		desc_p->txrx_status |= DESC_TXSTS_TXCHAIN;
@@ -155,7 +151,7 @@ static void rx_descs_init(struct dw_eth_dev *priv)
 		desc_p->dmamac_next = &desc_table_p[idx + 1];
 
 		desc_p->dmamac_cntl =
-			(MAC_MAX_FRAME_SZ & DESC_RXCTRL_SIZE1MASK) | \
+			(MAC_MAX_FRAME_SZ & DESC_RXCTRL_SIZE1MASK) |
 				      DESC_RXCTRL_RXCHAIN;
 
 		desc_p->txrx_status = DESC_RXSTS_OWNBYDMA;
@@ -321,14 +317,14 @@ static int _dw_eth_send(struct dw_eth_dev *priv, void *packet, int length)
 
 #if defined(CONFIG_DW_ALTDESCRIPTOR)
 	desc_p->txrx_status |= DESC_TXSTS_TXFIRST | DESC_TXSTS_TXLAST;
-	desc_p->dmamac_cntl |= (length << DESC_TXCTRL_SIZE1SHFT) & \
+	desc_p->dmamac_cntl |= (length << DESC_TXCTRL_SIZE1SHFT) &
 			       DESC_TXCTRL_SIZE1MASK;
 
 	desc_p->txrx_status &= ~(DESC_TXSTS_MSK);
 	desc_p->txrx_status |= DESC_TXSTS_OWNBYDMA;
 #else
-	desc_p->dmamac_cntl |= ((length << DESC_TXCTRL_SIZE1SHFT) & \
+	desc_p->dmamac_cntl |= ((length << DESC_TXCTRL_SIZE1SHFT) &
-			       DESC_TXCTRL_SIZE1MASK) | DESC_TXCTRL_TXLAST | \
+			       DESC_TXCTRL_SIZE1MASK) | DESC_TXCTRL_TXLAST |
 			       DESC_TXCTRL_TXFIRST;
 
 	desc_p->txrx_status = DESC_TXSTS_OWNBYDMA;
@@ -368,7 +364,7 @@ static int _dw_eth_recv(struct dw_eth_dev *priv, uchar **packetp)
 	/* Check  if the owner is the CPU */
 	if (!(status & DESC_RXSTS_OWNBYDMA)) {
 
-		length = (status & DESC_RXSTS_FRMLENMSK) >> \
+		length = (status & DESC_RXSTS_FRMLENMSK) >>
 			 DESC_RXSTS_FRMLENSHFT;
 
 		/* Invalidate received data */

include/configs/axs101.h

@@ -95,15 +95,9 @@
 /*
  * Ethernet PHY configuration
  */
-#define CONFIG_PHYLIB
 #define CONFIG_MII
 #define CONFIG_PHY_GIGE
 
-/*
- * Ethernet configuration
- */
-#define CONFIG_DW_AUTONEG
-
 /*
  * USB 1.1 configuration
  */

include/configs/bf609-ezkit.h

@@ -75,7 +75,6 @@
 #define CONFIG_DW_ALTDESCRIPTOR
 #define CONFIG_CMD_MII
 #define CONFIG_MII
-#define CONFIG_PHYLIB
 
 /* i2c Settings */
 #define CONFIG_SYS_I2C

include/configs/galileo.h

@@ -45,7 +45,6 @@
 /* 10/100M Ethernet support */
 #define CONFIG_DESIGNWARE_ETH
 #define CONFIG_DW_ALTDESCRIPTOR
-#define CONFIG_PHYLIB
 
 /* Environment configuration */
 #define CONFIG_ENV_SECT_SIZE		0x1000

include/configs/socfpga_arria5_socdk.h

@@ -52,8 +52,6 @@
 #endif
 
 #define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV		0	/* device 0 */
-#define CONFIG_ENV_OFFSET		512	/* just after the MBR */
 
 /* Extra Environment */
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -72,11 +70,13 @@
 	"mmcload=mmc rescan;" \
 		"load mmc 0:1 ${loadaddr} ${bootimage};" \
 		"load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
-	"qspiroot=/dev/mtdblock0\0" \
+	"qspiload=sf probe && mtdparts default && run ubiload\0" \
-	"qspirootfstype=jffs2\0" \
 	"qspiboot=setenv bootargs " CONFIG_BOOTARGS \
-		" root=${qspiroot} rw rootfstype=${qspirootfstype};"\
+		" ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;"\
-		"bootm ${loadaddr} - ${fdt_addr}\0"
+		"bootz ${loadaddr} - ${fdt_addr}\0" \
+	"ubiload=ubi part UBI && ubifsmount ubi0 && " \
+		"ubifsload ${loadaddr} /boot/${bootimage} && " \
+		"ubifsload ${fdt_addr} /boot/${fdtimage}\0"
 
 /* The rest of the configuration is shared */
 #include <configs/socfpga_common.h>

include/configs/socfpga_common.h

@@ -109,7 +109,6 @@
 #define CONFIG_DW_ALTDESCRIPTOR
 #define CONFIG_MII
 #define CONFIG_AUTONEG_TIMEOUT		(15 * CONFIG_SYS_HZ)
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_GIGE
 #endif
 
@@ -161,6 +160,19 @@
 #define CONFIG_SYS_MMC_MAX_BLK_COUNT	256	/* FIXME -- SPL only? */
 #endif
 
+/*
+ * NAND Support
+ */
+#ifdef CONFIG_NAND_DENALI
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_MAX_CHIPS	1
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_NAND_DENALI_ECC_SIZE	512
+#define CONFIG_SYS_NAND_REGS_BASE	SOCFPGA_NANDREGS_ADDRESS
+#define CONFIG_SYS_NAND_DATA_BASE	SOCFPGA_NANDDATA_ADDRESS
+#define CONFIG_SYS_NAND_BASE		(CONFIG_SYS_NAND_DATA_BASE + 0x10)
+#endif
+
 /*
  * I2C support
  */
@@ -197,7 +209,7 @@ unsigned int cm_get_l4_sp_clk_hz(void);
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#define MTDIDS_DEFAULT			"nor0=ff705000.spi"
+#define MTDIDS_DEFAULT			"nor0=ff705000.spi.0"
 #endif
 /* QSPI reference clock */
 #ifndef __ASSEMBLY__
@@ -249,7 +261,9 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 
 #define CONFIG_USB_FUNCTION_DFU
+#ifdef CONFIG_DM_MMC
 #define CONFIG_DFU_MMC
+#endif
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	(32 * 1024 * 1024)
 #define DFU_DEFAULT_POLL_TIMEOUT	300
 
@@ -271,6 +285,43 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 #define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
 #define CONFIG_ENV_SIZE			4096
 
+/* Environment for SDMMC boot */
+#if defined(CONFIG_ENV_IS_IN_MMC) && !defined(CONFIG_ENV_OFFSET)
+#define CONFIG_SYS_MMC_ENV_DEV		0	/* device 0 */
+#define CONFIG_ENV_OFFSET		512	/* just after the MBR */
+#endif
+
+/*
+ * mtd partitioning for serial NOR flash
+ *
+ * device nor0 <ff705000.spi.0>, # parts = 6
+ * #: name                size            offset          mask_flags
+ * 0: u-boot              0x00100000      0x00000000      0
+ * 1: env1                0x00040000      0x00100000      0
+ * 2: env2                0x00040000      0x00140000      0
+ * 3: UBI                 0x03e80000      0x00180000      0
+ * 4: boot                0x00e80000      0x00180000      0
+ * 5: rootfs              0x01000000      0x01000000      0
+ *
+ */
+#if defined(CONFIG_CMD_SF) && !defined(MTDPARTS_DEFAULT)
+#define MTDPARTS_DEFAULT	"mtdparts=ff705000.spi.0:"\
+				"1m(u-boot),"		\
+				"256k(env1),"		\
+				"256k(env2),"		\
+				"14848k(boot),"		\
+				"16m(rootfs),"		\
+				"-@1536k(UBI)\0"
+#endif
+
+/* UBI and UBIFS support */
+#if defined(CONFIG_CMD_SF) || defined(CONFIG_CMD_NAND)
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#endif
+
 /*
  * SPL
  *
@@ -294,8 +345,15 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_WATCHDOG_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
+#ifdef CONFIG_DM_MMC
 #define CONFIG_SPL_MMC_SUPPORT
+#endif
+#ifdef CONFIG_DM_SPI
 #define CONFIG_SPL_SPI_SUPPORT
+#endif
+#ifdef CONFIG_SPL_NAND_DENALI
+#define CONFIG_SPL_NAND_SUPPORT
+#endif
 
 /* SPL SDMMC boot support */
 #ifdef CONFIG_SPL_MMC_SUPPORT
@@ -318,6 +376,13 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x40000
 #endif
 
+/* SPL NAND boot support */
+#ifdef CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
+#endif
+
 /*
  * Stack setup
  */

include/configs/socfpga_cyclone5_socdk.h

@@ -52,8 +52,6 @@
 #endif
 
 #define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV		0	/* device 0 */
-#define CONFIG_ENV_OFFSET		512	/* just after the MBR */
 
 /* Extra Environment */
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -72,11 +70,13 @@
 	"mmcload=mmc rescan;" \
 		"load mmc 0:1 ${loadaddr} ${bootimage};" \
 		"load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
-	"qspiroot=/dev/mtdblock0\0" \
+	"qspiload=sf probe && mtdparts default && run ubiload\0" \
-	"qspirootfstype=jffs2\0" \
 	"qspiboot=setenv bootargs " CONFIG_BOOTARGS \
-		" root=${qspiroot} rw rootfstype=${qspirootfstype};"\
+		" ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;"\
-		"bootm ${loadaddr} - ${fdt_addr}\0"
+		"bootz ${loadaddr} - ${fdt_addr}\0" \
+	"ubiload=ubi part UBI && ubifsmount ubi0 && " \
+		"ubifsload ${loadaddr} /boot/${bootimage} && " \
+		"ubifsload ${fdt_addr} /boot/${fdtimage}\0"
 
 /* The rest of the configuration is shared */
 #include <configs/socfpga_common.h>

include/configs/socfpga_de0_nano_soc.h

@@ -48,8 +48,6 @@
 #endif
 
 #define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV		0	/* device 0 */
-#define CONFIG_ENV_OFFSET		512	/* just after the MBR */
 
 /* Extra Environment */
 #define CONFIG_EXTRA_ENV_SETTINGS \

include/configs/socfpga_mcvevk.h

@@ -45,8 +45,6 @@
 /* Environment is in MMC */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV		0	/* device 0 */
-#define CONFIG_ENV_OFFSET		512	/* just after the MBR */
 
 /* Extra Environment */
 #define CONFIG_EXTRA_ENV_SETTINGS					\

include/configs/socfpga_sockit.h

@@ -48,8 +48,6 @@
 #endif
 
 #define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV		0	/* device 0 */
-#define CONFIG_ENV_OFFSET		512	/* just after the MBR */
 
 /* Extra Environment */
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -68,6 +66,13 @@
 	"mmcload=mmc rescan;" \
 		"load mmc 0:1 ${loadaddr} ${bootimage};" \
 		"load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
+	"qspiload=sf probe && mtdparts default && run ubiload\0" \
+	"qspiboot=setenv bootargs " CONFIG_BOOTARGS \
+		" ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;"\
+		"bootz ${loadaddr} - ${fdt_addr}\0" \
+	"ubiload=ubi part UBI && ubifsmount ubi0 && " \
+		"ubifsload ${loadaddr} /boot/${bootimage} && " \
+		"ubifsload ${fdt_addr} /boot/${fdtimage}\0"
 
 /* The rest of the configuration is shared */
 #include <configs/socfpga_common.h>

include/configs/socfpga_socrates.h

@@ -48,8 +48,6 @@
 #endif
 
 #define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV		0	/* device 0 */
-#define CONFIG_ENV_OFFSET		512	/* just after the MBR */
 
 /* Extra Environment */
 #define CONFIG_EXTRA_ENV_SETTINGS \

include/configs/socfpga_sr1500.h

@@ -70,11 +70,13 @@
 	"mmcload=mmc rescan;" \
 		"load mmc 0:1 ${loadaddr} ${bootimage};" \
 		"load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
-	"qspiroot=/dev/mtdblock0\0" \
+	"qspiload=sf probe && mtdparts default && run ubiload\0" \
-	"qspirootfstype=jffs2\0" \
 	"qspiboot=setenv bootargs " CONFIG_BOOTARGS \
-		" root=${qspiroot} rw rootfstype=${qspirootfstype};"\
+		" ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;"\
-		"bootm ${loadaddr} - ${fdt_addr}\0"
+		"bootz ${loadaddr} - ${fdt_addr}\0" \
+	"ubiload=ubi part UBI && ubifsmount ubi0 && " \
+		"ubifsload ${loadaddr} /boot/${bootimage} && " \
+		"ubifsload ${fdt_addr} /boot/${fdtimage}\0"
 
 /* Environment */
 #define CONFIG_ENV_IS_IN_SPI_FLASH

include/configs/spear-common.h

@@ -17,7 +17,6 @@
 
 /* Ethernet driver configuration */
 #define CONFIG_MII
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_RESET_DELAY			10000		/* in usec */
 #define CONFIG_PHY_GIGE			/* Include GbE speed/duplex detection */
 

include/configs/stv0991.h

@@ -53,7 +53,6 @@
 /* GMAC related configs */
 
 #define CONFIG_MII
-#define CONFIG_PHYLIB
 #define CONFIG_DW_ALTDESCRIPTOR
 #define CONFIG_PHY_MICREL
 

include/configs/sunxi-common.h

@@ -309,11 +309,9 @@ extern int soft_i2c_gpio_scl;
 #endif
 
 #ifdef CONFIG_SUNXI_GMAC
-#define CONFIG_DW_AUTONEG
 #define CONFIG_PHY_GIGE			/* GMAC can use gigabit PHY	*/
 #define CONFIG_PHY_ADDR		1
 #define CONFIG_MII			/* MII PHY management		*/
-#define CONFIG_PHYLIB
 #endif
 
 #ifdef CONFIG_USB_EHCI_HCD

include/configs/tb100.h

@@ -42,7 +42,6 @@
 /*
  * Ethernet PHY configuration
  */
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_GIGE
 
 /*

include/configs/x600.h

@@ -77,7 +77,6 @@
 
 /* Ethernet config options */
 #define CONFIG_MII
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_RESET_DELAY			10000		/* in usec */
 #define CONFIG_PHY_ADDR		0	/* PHY address */
 #define CONFIG_PHY_GIGE			/* Include GbE speed/duplex detection */