GitHub-Mirror/u-boot
2
0
Fork 0
mirror of https://github.com/Fishwaldo/u-boot.git synced 2025-03-18 13:11:31 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

Update for esd boards dp405 and hub405

Browse source
This commit is contained in:
stroese 2005-03-01 17:26:39 +00:00
parent e58cf2a0cf
commit 47b1e3d77f
4 changed files with 1700 additions and 1638 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

3
CHANGELOG
View file

@ -2,6 +2,9 @@
Changes for U-Boot 1.1.3:
======================================================================
* Patch by Stefan Roese, 01 March 2005:
Update for esd boards dp405 and hub405
* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
* Cleanup USB and partition defines

3269
board/esd/dp405/fpgadata.c
View file

File diff suppressed because it is too large Load diff

64
board/esd/hub405/hub405.c
View file

@ -30,6 +30,47 @@
extern void lxt971_no_sleep(void);
int board_revision(void)
{
unsigned long osrl_reg;
unsigned long isr1l_reg;
unsigned long tcr_reg;
unsigned long value;
/*
* Get version of HUB405 board from GPIO's
*/
/*
* Setup GPIO pin(s) (IRQ6/GPIO23)
*/
osrl_reg = in32(GPIO0_OSRH);
isr1l_reg = in32(GPIO0_ISR1H);
tcr_reg = in32(GPIO0_TCR);
out32(GPIO0_OSRH, osrl_reg & ~0x00030000); /* output select */
out32(GPIO0_ISR1H, isr1l_reg | 0x00030000); /* input select */
out32(GPIO0_TCR, tcr_reg & ~0x00000100); /* select input */
udelay(1000); /* wait some time before reading input */
value = in32(GPIO0_IR) & 0x00000100; /* get config bits */
/*
* Restore GPIO settings
*/
out32(GPIO0_OSRH, osrl_reg); /* output select */
out32(GPIO0_ISR1H, isr1l_reg); /* input select */
out32(GPIO0_TCR, tcr_reg); /* enable output driver for outputs */
if (value & 0x00000100) {
/* Revision 1.1 or 1.2 detected */
return 1;
}
/* Revision 1.0 */
return 0;
}
int board_early_init_f (void)
{
/*
@ -69,6 +110,8 @@ int misc_init_f (void)
int misc_init_r (void)
{
DECLARE_GLOBAL_DATA_PTR;
volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
volatile unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
volatile unsigned char *duart2_mcr = (unsigned char *)((ulong)DUART2_BA + 4);
@ -77,6 +120,7 @@ int misc_init_r (void)
unsigned long val;
int delay, flashcnt;
char *str;
char hw_rev[4];
/*
* Enable interrupts in exar duart mcr[3]
@ -121,14 +165,14 @@ int misc_init_r (void)
*/
str = getenv("bd_type"); /* this is only set on non prototype hardware */
if (str != NULL) {
if ((strcmp(str, "swch405") == 0) || (strcmp(str, "hub405") == 0)) {
if ((strcmp(str, "swch405") == 0) || ((!strcmp(str, "hub405") && (gd->board_type >= 1)))) {
unsigned char led_reg_default = 0;
str = getenv("ap_pwr");
if (!str || (str && (str[0] == '1')))
led_reg_default = 0x04 | 0x02 ; /* U2_LED | AP_PWR */
/*
* Flash LEDs on SWCH405
* Flash LEDs
*/
for (flashcnt = 0; flashcnt < 3; flashcnt++) {
*led_reg = led_reg_default; /* LED_A..D off */
@ -150,6 +194,11 @@ int misc_init_r (void)
out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
udelay(1000); /* wait 1ms */
/*
* Store hardware revision in environment for further processing
*/
sprintf(hw_rev, "1.%ld", gd->board_type);
setenv("hw_rev", hw_rev);
return (0);
}
@ -159,6 +208,8 @@ int misc_init_r (void)
*/
int checkboard (void)
{
DECLARE_GLOBAL_DATA_PTR;
unsigned char str[64];
int i = getenv_r ("serial#", str, sizeof(str));
@ -170,7 +221,14 @@ int checkboard (void)
puts(str);
}
putc ('\n');
if (getenv_r("bd_type", str, sizeof(str)) != -1) {
printf(" (%s", str);
} else {
puts(" (Missing bd_type!");
}
gd->board_type = board_revision();
printf(", Rev 1.%ld)\n", gd->board_type);
/*
* Disable sleep mode in LXT971

2
include/configs/HUB405.h
View file

@ -42,6 +42,8 @@
#define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */
#define CONFIG_BOARD_TYPES 1 /* support board types */
#define CONFIG_BAUDRATE 9600
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */