Merge with git://www.denx.de/git/u-boot.git

.gitignore

@@ -0,0 +1,13 @@
+*.orig
+*.a
+*.o
+*.depend
+System.map
+/u-boot
+/u-boot.map
+/u-boot.bin
+/u-boot.srec
+/LOG
+/errlog
+/reloc_off
+

CREDITS

@@ -117,7 +117,7 @@ N: Arun Dharankar
 E: ADharankar@ATTBI.Com
 D: threads / scheduler example code
 
-N: Kári Davíðsson
+N: K?ri Dav??sson
 E: kd@flaga.is
 D: FLAGA DM Support
 
@@ -143,7 +143,7 @@ E: info@elste.org
 D: Port for the ModNET50 Board, NET+50 CPU Port
 W: http://www.imms.de
 
-N: Daniel Engström
+N: Daniel Engstr?m
 E: daniel@omicron.se
 D: x86 port, Support for sc520_cdp board
 
@@ -334,7 +334,7 @@ N: Frank Morauf
 E: frank.morauf@salzbrenner.com
 D: Support for Embedded Planet RPX Super Board
 
-N: David Müller
+N: David M?ller
 E: d.mueller@elsoft.ch
 D: Support for Samsung ARM920T SMDK2410 eval board
 
@@ -499,3 +499,8 @@ N: Alex Zuepke
 E: azu@sysgo.de
 D: Overall improvements on StrongARM, ARM720TDMI; Support for Tuxscreen; initial PCMCIA support for ARM
 W: www.elinos.com
+
+N: Nobuhiro Iwamatsu
+E: iwamatsu@nigauri.org
+D: Support for SuperH, MS7750SE01 and  MS7722SE01 boards.
+W: http://www.nigauri.org/~iwamatsu/

MAINTAINERS

@@ -146,7 +146,6 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 	CPCI4052		PPC405GP
 	CPCI405AB		PPC405GP
 	CPCI405DT		PPC405GP
-	CPCI440			PPC440GP
 	CPCIISER4		PPC405GP
 	DASA_SIM		IOP480 (PPC401)
 	DP405			PPC405EP
@@ -159,6 +158,7 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 	PCI405			PPC405GP
 	PLU405			PPC405EP
 	PMC405			PPC405GP
+	PMC440			PPC440EPx
 	VOH405			PPC405EP
 	VOM405			PPC405EP
 	WUH405			PPC405EP
@@ -204,6 +204,10 @@ Murray Jensen <Murray.Jensen@csiro.au>
 	cogent_mpc8260		MPC8260
 	hymod			MPC8260
 
+Larry Johnson <lrj@acm.org>
+
+	korat			PPC440EPx
+
 Brad Kemp <Brad.Kemp@seranoa.com>
 
 	ppmc8260		MPC8260
@@ -303,8 +307,11 @@ Stefan Roese <sr@denx.de>
 	bamboo			PPC440EP
 	bunbinga		PPC405EP
 	ebony			PPC440GP
+	haleakala		PPC405EXr
 	katmai			PPC440SPe
+	kilauea			PPC405EX
 	lwmon5			PPC440EPx
+	makalu			PPC405EX
 	ocotea			PPC440GX
 	p3p440			PPC440GP
 	pcs440ep		PPC440EP
@@ -630,7 +637,22 @@ Hayden Fraser <Hayden.Fraser@freescale.com>
 
 Haavard Skinnemoen <hskinnemoen@atmel.com>
 
-	ATSTK1000		AT32AP7000
+	ATSTK1000		AT32AP7xxx
+	ATSTK1002		AT32AP7000
+	ATSTK1003		AT32AP7001
+	ATSTK1004		AT32AP7002
+
+#########################################################################
+# SuperH Systems:							#
+#									#
+# Maintainer Name, Email Address					#
+#	Board			CPU					#
+#########################################################################
+
+Nobuhiro Iwmaatsu <iwamatsu@nigauri.org>
+
+	MS7750SE		SH7750
+	MS7722SE		SH7722
 
 #########################################################################
 # End of MAINTAINERS list						#

MAKEALL

@@ -168,7 +168,6 @@ LIST_4xx="		\
 	CPCI4052	\
 	CPCI405AB	\
 	CPCI405DT	\
-	CPCI440		\
 	CPCIISER4	\
 	CRAYL1		\
 	csb272		\
@@ -180,6 +179,8 @@ LIST_4xx="		\
 	ERIC		\
 	EXBITGEN	\
 	G2000		\
+	haleakala	\
+	haleakala_nand	\
 	hcu4		\
 	hcu5		\
 	HH405		\
@@ -187,8 +188,12 @@ LIST_4xx="		\
 	JSE		\
 	KAREF		\
 	katmai		\
+	kilauea		\
+	kilauea_nand	\
+	korat		\
 	luan		\
 	lwmon5		\
+	makalu		\
 	METROBOX	\
 	MIP405		\
 	MIP405T		\
@@ -203,6 +208,7 @@ LIST_4xx="		\
 	PIP405		\
 	PLU405		\
 	PMC405		\
+	PMC440		\
 	PPChameleonEVB	\
 	rainier		\
 	sbc405		\
@@ -342,6 +348,7 @@ LIST_85xx="		\
 #########################################################################
 
 LIST_86xx="		\
+	MPC8610HPCD	\
 	MPC8641HPCN	\
 	sbc8641d	\
 "
@@ -378,6 +385,7 @@ LIST_7xx="		\
 
 LIST_ppc="		\
 	${LIST_5xx}	\
+	${LIST_512x}	\
 	${LIST_5xxx}	\
 	${LIST_8xx}	\
 	${LIST_8220}	\
@@ -555,6 +563,7 @@ LIST_mips5kc_el=""
 
 LIST_au1xx0_el="	\
 	dbau1550_el	\
+	pb1000		\
 "
 
 LIST_mips_el="			\
@@ -641,6 +650,8 @@ LIST_coldfire="			\
 
 LIST_avr32="		\
 	atstk1002	\
+	atstk1003	\
+	atstk1004	\
 "
 
 #########################################################################
@@ -654,6 +665,23 @@ LIST_blackfin="		\
 	bf561-ezkit	\
 "
 
+#########################################################################
+## SH Systems
+#########################################################################
+
+LIST_sh4="		\
+	ms7750se	\
+	ms7722se	\
+"
+
+LIST_sh3=""
+
+
+LIST_sh="		\
+	${LIST_sh3}	\
+	${LIST_sh4}	\
+"
+
 #-----------------------------------------------------------------------
 
 #----- for now, just run PPC by default -----
@@ -688,7 +716,9 @@ do
 	mips|mips_el| \
 	nios|nios2| \
 	ppc|5xx|5xxx|512x|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx| \
-	x86|I486|TSEC)
+	x86|I486|TSEC| \
+	sh|sh4|sh3 \
+	)
 			for target in `eval echo '$LIST_'${arg}`
 			do
 				build_target ${target}

Makefile

@@ -23,8 +23,8 @@
 
 VERSION = 1
 PATCHLEVEL = 3
-SUBLEVEL = 0
+SUBLEVEL = 1
-EXTRAVERSION = -rc3
+EXTRAVERSION =
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 VERSION_FILE = $(obj)include/version_autogenerated.h
 
@@ -152,6 +152,9 @@ endif
 ifeq ($(ARCH),avr32)
 CROSS_COMPILE = avr32-linux-
 endif
+ifeq ($(ARCH),sh)
+CROSS_COMPILE = sh4-linux-
+endif
 endif
 endif
 
@@ -205,22 +208,30 @@ LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs
 	fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
 LIBS += net/libnet.a
 LIBS += disk/libdisk.a
-LIBS += rtc/librtc.a
-LIBS += dtt/libdtt.a
-LIBS += drivers/libdrivers.a
 LIBS += drivers/bios_emulator/libatibiosemu.a
-LIBS += drivers/nand/libnand.a
+LIBS += drivers/block/libblock.a
-LIBS += drivers/nand_legacy/libnand_legacy.a
+LIBS += drivers/hwmon/libhwmon.a
-LIBS += drivers/onenand/libonenand.a
+LIBS += drivers/i2c/libi2c.a
+LIBS += drivers/input/libinput.a
+LIBS += drivers/misc/libmisc.a
+LIBS += drivers/mtd/libmtd.a
+LIBS += drivers/mtd/nand/libnand.a
+LIBS += drivers/mtd/nand_legacy/libnand_legacy.a
+LIBS += drivers/mtd/onenand/libonenand.a
 LIBS += drivers/net/libnet.a
+LIBS += drivers/net/sk98lin/libsk98lin.a
+LIBS += drivers/pci/libpci.a
+LIBS += drivers/pcmcia/libpcmcia.a
 ifeq ($(CPU),mpc83xx)
 LIBS += drivers/qe/qe.a
 endif
 ifeq ($(CPU),mpc85xx)
 LIBS += drivers/qe/qe.a
 endif
+LIBS += drivers/rtc/librtc.a
 LIBS += drivers/serial/libserial.a
-LIBS += drivers/sk98lin/libsk98lin.a
+LIBS += drivers/usb/libusb.a
+LIBS += drivers/video/libvideo.a
 LIBS += post/libpost.a post/drivers/libpostdrivers.a
 LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \
 	"post/lib_$(ARCH)/libpost$(ARCH).a"; fi)
@@ -323,25 +334,65 @@ env:
 depend dep:	version
 		for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
 
+TAG_SUBDIRS += include
+TAG_SUBDIRS += lib_generic board/$(BOARDDIR)
+TAG_SUBDIRS += cpu/$(CPU)
+TAG_SUBDIRS += lib_$(ARCH)
+TAG_SUBDIRS += fs/cramfs
+TAG_SUBDIRS += fs/fat
+TAG_SUBDIRS += fs/fdos
+TAG_SUBDIRS += fs/jffs2
+TAG_SUBDIRS += net
+TAG_SUBDIRS += disk
+TAG_SUBDIRS += common
+TAG_SUBDIRS += drivers/bios_emulator
+TAG_SUBDIRS += drivers/block
+TAG_SUBDIRS += drivers/hwmon
+TAG_SUBDIRS += drivers/i2c
+TAG_SUBDIRS += drivers/input
+TAG_SUBDIRS += drivers/misc
+TAG_SUBDIRS += drivers/mtd
+TAG_SUBDIRS += drivers/mtd/nand
+TAG_SUBDIRS += drivers/mtd/nand_legacy
+TAG_SUBDIRS += drivers/mtd/onenand
+TAG_SUBDIRS += drivers/net
+TAG_SUBDIRS += drivers/net/sk98lin
+TAG_SUBDIRS += drivers/pci
+TAG_SUBDIRS += drivers/pcmcia
+TAG_SUBDIRS += drivers/qe
+TAG_SUBDIRS += drivers/rtc
+TAG_SUBDIRS += drivers/serial
+TAG_SUBDIRS += drivers/usb
+TAG_SUBDIRS += drivers/video
+
 tags ctags:
-		ctags -w -o $(OBJTREE)/ctags `find $(SUBDIRS) include \
+		ctags -w -o $(OBJTREE)/ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \
-				lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
+						-name '*.[ch]' -print`
-				fs/cramfs fs/fat fs/fdos fs/jffs2 \
-				net disk rtc dtt drivers drivers/sk98lin common \
-			\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
 
 etags:
-		etags -a -o $(OBJTREE)/etags `find $(SUBDIRS) include \
+		etags -a -o $(OBJTREE)/etags `find $(SUBDIRS) $(TAG_SUBDIRS) \
-				lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
+						-name '*.[ch]' -print`
-				fs/cramfs fs/fat fs/fdos fs/jffs2 \
-				net disk rtc dtt drivers drivers/sk98lin common \
-			\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
 
 $(obj)System.map:	$(obj)u-boot
 		@$(NM) $< | \
 		grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 		sort > $(obj)System.map
 
+#
+# Auto-generate the autoconf.mk file (which is included by all makefiles)
+#
+# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
+# the dep file is only include in this top level makefile to determine when
+# to regenerate the autoconf.mk file.
+$(OBJTREE)/include/autoconf.mk: $(obj)include/config.h
+	@echo Generating include/autoconf.mk
+	@# Generate the dependancies
+	@$(CC) -M $(HOST_CFLAGS) $(CPPFLAGS) -MQ $@ include/common.h > $@.dep
+	@# Extract the config macros
+	@$(CPP) $(CFLAGS) -dM include/common.h | sed -n -f tools/scripts/define2mk.sed >> $@
+
+sinclude $(OBJTREE)/include/autoconf.mk.dep
+
 #########################################################################
 else
 all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
@@ -361,7 +412,8 @@ CHANGELOG:
 
 unconfig:
 	@rm -f $(obj)include/config.h $(obj)include/config.mk \
-		$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp
+		$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
+		$(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
 
 #========================================================================
 # PowerPC
@@ -1111,9 +1163,6 @@ CPCI405AB_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
 	@echo "BOARD_REVISION = $(@:_config=)"	>> $(obj)include/config.mk
 
-CPCI440_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci440 esd
-
 CPCIISER4_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
 
@@ -1168,12 +1217,32 @@ KAREF_config: unconfig
 katmai_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
 
+# Kilauea & Haleakala images are identical (recognized via PVR)
+kilauea_config \
+haleakala_config: unconfig
+	@$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
+
+kilauea_nand_config \
+haleakala_nand_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/amcc/kilauea
+	@mkdir -p $(obj)nand_spl/board/amcc/kilauea
+	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
+	@$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
+	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
+	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+
+korat_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx korat
+
 luan_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
 
 lwmon5_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
 
+makalu_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc
+
 METROBOX_config: unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
 
@@ -1217,6 +1286,9 @@ PLU405_config:	unconfig
 PMC405_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
 
+PMC440_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
+
 PPChameleonEVB_config		\
 PPChameleonEVB_BA_25_config	\
 PPChameleonEVB_ME_25_config	\
@@ -1610,14 +1682,14 @@ TQM8265_AA_config:  unconfig
 	fi; \
 	echo "#define CONFIG_$${CFREQ}MHz"	>>$(obj)include/config.h ; \
 	echo "... with $${CFREQ}MHz system clock" ; \
-	if [ "$${CACHE}" == "yes" ] ; then \
+	if [ "$${CACHE}" = "yes" ] ; then \
 		echo "#define CONFIG_L2_CACHE"	>>$(obj)include/config.h ; \
 		echo "... with L2 Cache support" ; \
 	else \
 		echo "#undef CONFIG_L2_CACHE"	>>$(obj)include/config.h ; \
 		echo "... without L2 Cache support" ; \
 	fi; \
-	if [ "$${BMODE}" == "60x" ] ; then \
+	if [ "$${BMODE}" = "60x" ] ; then \
 		echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
 		echo "... with 60x Bus Mode" ; \
 	else \
@@ -1731,7 +1803,7 @@ M54455EVB_i66_config :	unconfig
 	M54455EVB_i66_config)		FLASH=INTEL; FREQ=66666666;; \
 	esac; \
 	>include/config.h ; \
-	if [ "$${FLASH}" == "INTEL" ] ; then \
+	if [ "$${FLASH}" = "INTEL" ] ; then \
 		echo "#undef CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
 		echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
 		cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
@@ -1862,7 +1934,7 @@ TQM834x_config:	unconfig
 #########################################################################
 
 MPC8540ADS_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads
+	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
 
 MPC8540EVAL_config \
 MPC8540EVAL_33_config \
@@ -1886,7 +1958,7 @@ MPC8540EVAL_66_slave_config:      unconfig
 	@$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
 
 MPC8560ADS_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads
+	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale
 
 MPC8541CDS_legacy_config \
 MPC8541CDS_config:	unconfig
@@ -1896,7 +1968,7 @@ MPC8541CDS_config:	unconfig
 		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
 		echo "... legacy" ; \
 	fi
-	@$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds cds
+	@$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale
 
 MPC8544DS_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
@@ -1909,7 +1981,7 @@ MPC8548CDS_config:	unconfig
 		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
 		echo "... legacy" ; \
 	fi
-	@$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds cds
+	@$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale
 
 MPC8555CDS_legacy_config \
 MPC8555CDS_config:	unconfig
@@ -1919,10 +1991,10 @@ MPC8555CDS_config:	unconfig
 		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
 		echo "... legacy" ; \
 	fi
-	@$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds cds
+	@$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale
 
 MPC8568MDS_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds
+	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
 
 PM854_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
@@ -1989,6 +2061,9 @@ TQM8560_config:		unconfig
 ## MPC86xx Systems
 #########################################################################
 
+MPC8610HPCD_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
+
 MPC8641HPCN_config:    unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale
 
@@ -2610,7 +2685,30 @@ bf561-ezkit_config:	unconfig
 #########################################################################
 
 atstk1002_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000
+	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
+atstk1003_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
+atstk1004_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
+#########################################################################
+#########################################################################
+#########################################################################
+
+#########################################################################
+## sh4 (Renesas SuperH)
+#########################################################################
+ms7750se_config: unconfig
+	@ >include/config.h
+	@echo "#define CONFIG_MS7750SE 1" >> include/config.h
+	@./mkconfig -a $(@:_config=) sh sh4 ms7750se
+
+ms7722se_config :       unconfig
+	@ >include/config.h
+	@echo "#define CONFIG_MS7722SE 1" >> include/config.h
+	@./mkconfig -a $(@:_config=) sh sh4 ms7722se
 
 #########################################################################
 #########################################################################

README

@@ -235,9 +235,7 @@ The following options need to be configured:
 - Board Type:	Define exactly one, e.g. CONFIG_MPC8540ADS.
 
 - CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined)
-		Define exactly one of
+		Define exactly one, e.g. CONFIG_ATSTK1002
-		CONFIG_ATSTK1002
-
 
 - CPU Module Type: (if CONFIG_COGENT is defined)
 		Define exactly one of

board/ads5121/u-boot.lds

@@ -51,6 +51,7 @@ SECTIONS
   {
     cpu/mpc512x/start.o	(.text)
     *(.text)
+    *(.fixup)
     *(.got1)
     . = ALIGN(16);
     *(.rodata)

board/amcc/bamboo/bamboo.c

@@ -67,13 +67,13 @@ const unsigned char cfg_simulate_spd_eeprom[128] = {
 	0x00,    /* Module data width continued: +0 */
 	0x04,    /* 2.5 Volt */
 	0x75,    /* SDRAM Cycle Time (cas latency 2.5) = 7.5 ns */
+	0x00,    /* SDRAM Access from clock */
 #ifdef CONFIG_DDR_ECC
 	0x02,    /* ECC ON : 02 OFF : 00 */
 #else
 	0x00,    /* ECC ON : 02 OFF : 00 */
 #endif
-	0x82,    /* refresh Rate Type: Normal (15.625us) + Self refresh */
+	0x82,    /* refresh Rate Type: Normal (7.8us) + Self refresh */
-	0,
 	0,
 	0,
 	0x01,    /* wcsbc = 1 */

board/amcc/bubinga/u-boot.lds

@@ -62,19 +62,6 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)

board/amcc/ebony/u-boot.lds

@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o	(.text)
     board/amcc/ebony/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)

board/amcc/katmai/katmai.c

@@ -24,21 +24,16 @@
 
 #include <common.h>
 #include <ppc4xx.h>
-#include <asm/processor.h>
 #include <i2c.h>
-#include <asm-ppc/io.h>
+#include <libfdt.h>
-#include <asm-ppc/gpio.h>
+#include <fdt_support.h>
-
+#include <asm/processor.h>
-#include "../cpu/ppc4xx/440spe_pcie.h"
+#include <asm/io.h>
-
+#include <asm/gpio.h>
-#undef PCIE_ENDPOINT
+#include <asm/4xx_pcie.h>
-/* #define PCIE_ENDPOINT 1 */
 
 DECLARE_GLOBAL_DATA_PTR;
 
-int ppc440spe_init_pcie_rootport(int port);
-void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
-
 int board_early_init_f (void)
 {
 	unsigned long mfr;
@@ -224,10 +219,9 @@ int board_early_init_f (void)
 	mtdcr (uic0sr, 0x00000000);	/* clear all interrupts*/
 	mtdcr (uic0sr, 0xffffffff);	/* clear all interrupts*/
 
-/* SDR0_MFR should be part of Ethernet init */
+	mfsdr(sdr_mfr, mfr);
-	mfsdr (sdr_mfr, mfr);
+	mfr |= SDR0_MFR_FIXD;		/* Workaround for PCI/DMA */
-	mfr &= ~SDR0_MFR_ECS_MASK;
+	mtsdr(sdr_mfr, mfr);
-/*	mtsdr(sdr_mfr, mfr); */
 
 	mtsdr(SDR0_PFC0, CFG_PFC0);
 
@@ -396,6 +390,7 @@ void pcie_setup_hoses(int busno)
 {
 	struct pci_controller *hose;
 	int i, bus;
+	int ret = 0;
 	char *env;
 	unsigned int delay;
 
@@ -409,12 +404,13 @@ void pcie_setup_hoses(int busno)
 		if (!katmai_pcie_card_present(i))
 			continue;
 
-#ifdef PCIE_ENDPOINT
+		if (is_end_point(i))
- 		if (ppc440spe_init_pcie_endport(i)) {
+			ret = ppc4xx_init_pcie_endport(i);
-#else
+		else
-		if (ppc440spe_init_pcie_rootport(i)) {
+			ret = ppc4xx_init_pcie_rootport(i);
-#endif
+		if (ret) {
-			printf("PCIE%d: initialization failed\n", i);
+			printf("PCIE%d: initialization as %s failed\n", i,
+			       is_end_point(i) ? "endpoint" : "root-complex");
 			continue;
 		}
 
@@ -428,35 +424,33 @@ void pcie_setup_hoses(int busno)
 			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
 			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
 			       CFG_PCIE_MEMSIZE,
-			       PCI_REGION_MEM
+			       PCI_REGION_MEM);
-			);
 		hose->region_count = 1;
 		pci_register_hose(hose);
 
-#ifdef PCIE_ENDPOINT
+		if (is_end_point(i)) {
-		ppc440spe_setup_pcie_endpoint(hose, i);
+		    	ppc4xx_setup_pcie_endpoint(hose, i);
-		/*
+			/*
-		 * Reson for no scanning is endpoint can not generate
+			 * Reson for no scanning is endpoint can not generate
-		 * upstream configuration accesses.
+			 * upstream configuration accesses.
-		 */
+		    	 */
-#else
+		} else {
-		ppc440spe_setup_pcie_rootpoint(hose, i);
+		    	ppc4xx_setup_pcie_rootpoint(hose, i);
+			env = getenv ("pciscandelay");
+		    	if (env != NULL) {
+			    	delay = simple_strtoul(env, NULL, 10);
+				if (delay > 5)
+				    	printf("Warning, expect noticable delay before "
+					       "PCIe scan due to 'pciscandelay' value!\n");
+				mdelay(delay * 1000);
+			}
 
-		env = getenv ("pciscandelay");
+		    	/*
-		if (env != NULL) {
+		     	 * Config access can only go down stream
-			delay = simple_strtoul (env, NULL, 10);
+		     	 */
-			if (delay > 5)
+		    	hose->last_busno = pci_hose_scan(hose);
-				printf ("Warning, expect noticable delay before PCIe"
+		    	bus = hose->last_busno + 1;
-					"scan due to 'pciscandelay' value!\n");
-			mdelay (delay * 1000);
 		}
-
-		/*
-		 * Config access can only go down stream
-		 */
-		hose->last_busno = pci_hose_scan(hose);
-		bus = hose->last_busno + 1;
-#endif
 	}
 }
 #endif	/* defined(CONFIG_PCI) */
@@ -541,3 +535,24 @@ int post_hotkeys_pressed(void)
 	return (ctrlc());
 }
 #endif
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 val[4];
+	int rc;
+
+	ft_cpu_setup(blob, bd);
+
+	/* Fixup NOR mapping */
+	val[0] = 0;				/* chip select number */
+	val[1] = 0;				/* always 0 */
+	val[2] = gd->bd->bi_flashstart;
+	val[3] = gd->bd->bi_flashsize;
+	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+				  val, sizeof(val), 1);
+	if (rc)
+		printf("Unable to update property NOR mapping, err=%s\n",
+		       fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */

board/amcc/kilauea/Makefile

@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o cmd_pll.o memory.o
+SOBJS	= init.o
+
+SRCS 	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend *~
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/amcc/kilauea/cmd_pll.c

@@ -0,0 +1,297 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/*
+ * ehnus: change pll frequency.
+ * Wed Sep  5 11:45:17 CST 2007
+ * hsun@udtech.com.cn
+ */
+
+
+#include <common.h>
+#include <config.h>
+#include <command.h>
+#include <i2c.h>
+
+#ifdef CONFIG_CMD_EEPROM
+
+#define EEPROM_CONF_OFFSET		0
+#define EEPROM_TEST_OFFSET		16
+#define EEPROM_SDSTP_PARAM		16
+
+#define PLL_NAME_MAX			12
+#define BUF_STEP			8
+
+/* eeprom_wirtes 8Byte per op. */
+#define EEPROM_ALTER_FREQ(freq)						\
+	do {								\
+		int __i;						\
+		for (__i = 0; __i < 2; __i++)				\
+			eeprom_write (CFG_I2C_EEPROM_ADDR,		\
+				      EEPROM_CONF_OFFSET + __i*BUF_STEP, \
+				      pll_select[freq],			\
+				      BUF_STEP + __i*BUF_STEP);		\
+	} while (0)
+
+#define PDEBUG
+#ifdef	PDEBUG
+#define PLL_DEBUG	pll_debug(EEPROM_CONF_OFFSET)
+#else
+#define PLL_DEBUG
+#endif
+
+typedef enum {
+	PLL_ebc20,
+	PLL_333,
+	PLL_4001,
+	PLL_4002,
+	PLL_533,
+	PLL_600,
+	PLL_666,	/* For now, kilauea can't support */
+	RCONF,
+	WTEST,
+	PLL_TOTAL
+} pll_freq_t;
+
+static const char
+pll_name[][PLL_NAME_MAX] = {
+	"PLL_ebc20",
+	"PLL_333",
+	"PLL_400@1",
+	"PLL_400@2",
+	"PLL_533",
+	"PLL_600",
+	"PLL_666",
+	"RCONF",
+	"WTEST",
+	""
+};
+
+/*
+ * ehnus:
+ */
+static uchar
+pll_select[][EEPROM_SDSTP_PARAM] = {
+	/* 0: CPU 333MHz EBC 20MHz, for test only */
+	{
+		0x8c, 0x12, 0xec, 0x12, 0x88, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 0: 333 */
+	{
+		0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 1: 400_266 */
+	{
+		0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 2: 400 */
+	{
+		0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 3: 533 */
+	{
+		0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 4: 600 */
+	{
+		0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 5: 666 */
+	{
+		0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	{}
+};
+
+static uchar
+testbuf[EEPROM_SDSTP_PARAM] = {
+	0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77,
+	0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff
+};
+
+static void
+pll_debug(int off)
+{
+	int i;
+	uchar buffer[EEPROM_SDSTP_PARAM];
+
+	memset(buffer, 0, sizeof(buffer));
+	eeprom_read(CFG_I2C_EEPROM_ADDR, off,
+		    buffer, EEPROM_SDSTP_PARAM);
+
+	printf("Debug: SDSTP[0-3] at offset \"0x%02x\" lists as follows: \n", off);
+	for (i = 0; i < EEPROM_SDSTP_PARAM; i++)
+		printf("%02x ", buffer[i]);
+	printf("\n");
+}
+
+static void
+test_write(void)
+{
+	printf("Debug: test eeprom_write ... ");
+
+	/*
+	 * Write twice, 8 bytes per write
+	 */
+	eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET,
+		      testbuf, 8);
+	eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8,
+		      testbuf, 16);
+	printf("done\n");
+
+	pll_debug(EEPROM_TEST_OFFSET);
+}
+
+int
+do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	char c = '\0';
+	pll_freq_t pll_freq;
+	if (argc < 2) {
+		printf("Usage: \n%s\n", cmdtp->usage);
+		goto ret;
+	}
+
+	for (pll_freq = PLL_ebc20; pll_freq < PLL_TOTAL; pll_freq++)
+		if (!strcmp(pll_name[pll_freq], argv[1]))
+			break;
+
+	switch (pll_freq) {
+	case PLL_ebc20:
+	case PLL_333:
+	case PLL_4001:
+	case PLL_4002:
+	case PLL_533:
+	case PLL_600:
+		EEPROM_ALTER_FREQ(pll_freq);
+		break;
+
+	case PLL_666:		/* not support */
+		printf("Choose this option will result in a boot failure."
+		       "\nContinue? (Y/N): ");
+
+		c = getc(); putc('\n');
+
+		if ((c == 'y') || (c == 'Y')) {
+			EEPROM_ALTER_FREQ(pll_freq);
+			break;
+		}
+		goto ret;
+
+	case RCONF:
+		pll_debug(EEPROM_CONF_OFFSET);
+		goto ret;
+	case WTEST:
+		printf("DEBUG: write test\n");
+		test_write();
+		goto ret;
+
+	default:
+		printf("Invalid options"
+		       "\n\nUsage: \n%s\n", cmdtp->usage);
+		goto ret;
+	}
+
+	printf("PLL set to %s, "
+	       "reset the board to take effect\n", pll_name[pll_freq]);
+
+	PLL_DEBUG;
+ret:
+	return 0;
+}
+
+U_BOOT_CMD(
+	pllalter, CFG_MAXARGS, 1,        do_pll_alter,
+	"pllalter- change pll frequence \n",
+	"pllalter <selection>      - change pll frequence \n\n\
+	** New freq take effect after reset. ** \n\
+	----------------------------------------------\n\
+	PLL_ebc20: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	Same as PLL_333	\n\
+	\t	except          \n\
+	\t	EBC: 20 MHz     \n\
+	----------------------------------------------\n\
+	PLL_333: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 666 MHz  \n\
+	\t	CPU: 333 MHz  \n\
+	\t	PLB: 166 MHz  \n\
+	\t	OPB: 83 MHz   \n\
+	\t	DDR: 83 MHz   \n\
+	------------------------------------------------\n\
+	PLL_400@1: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 800 MHz  \n\
+	\t	CPU: 400 MHz  \n\
+	\t	PLB: 133 MHz  \n\
+	\t	OPB: 66  MHz  \n\
+	\t	DDR: 133 MHz  \n\
+	------------------------------------------------\n\
+	PLL_400@2: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 800 MHz  \n\
+	\t	CPU: 400 MHz  \n\
+	\t	PLB: 200 MHz  \n\
+	\t	OPB: 100 MHz  \n\
+	\t	DDR: 200 MHz  \n\
+	----------------------------------------------\n\
+	PLL_533: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1066 MHz  \n\
+	\t	CPU: 533  MHz  \n\
+	\t	PLB: 177  MHz  \n\
+	\t	OPB: 88   MHz  \n\
+	\t	DDR: 177  MHz  \n\
+	----------------------------------------------\n\
+	PLL_600: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1200 MHz  \n\
+	\t	CPU: 600  MHz  \n\
+	\t	PLB: 200  MHz  \n\
+	\t	OPB: 100  MHz  \n\
+	\t	DDR: 200  MHz  \n\
+	----------------------------------------------\n\
+	PLL_666: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1333 MHz  \n\
+	\t	CPU: 666  MHz  \n\
+	\t	PLB: 166  MHz  \n\
+	\t	OPB: 83   MHz  \n\
+	\t	DDR: 166  MHz  \n\
+	-----------------------------------------------\n\
+	RCONF: Read current eeprom configuration.      \n\
+	-----------------------------------------------\n\
+	WTEST: Test EEPROM write with predefined values\n\
+	-----------------------------------------------\n"
+	);
+
+#endif	/* (CONFIG_COMMANDS & CFG_CMD_EEPROM) */

board/amcc/kilauea/config.mk

@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xFFFA0000
+endif
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif

board/amcc/kilauea/init.S

@@ -0,0 +1,154 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Based on code provided from UDTech and AMCC
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <ppc4xx.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#define mtsdram_as(reg, value)	 	\
+	addi    r4,0,reg	;     	\
+	mtdcr   memcfga,r4	;	\
+	addis   r4,0,value@h 	;	\
+	ori     r4,r4,value@l	;	\
+	mtdcr   memcfgd,r4	;
+
+	.globl  ext_bus_cntlr_init
+ext_bus_cntlr_init:
+#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+
+	/*
+	 * DDR2 setup
+	 */
+
+	/* Following the DDR Core Manual, here is the initialization */
+
+	/* Step 1 */
+
+	/* Step 2 */
+
+	/* Step 3 */
+
+	/* base=00000000, size=256MByte (6), mode=7 (n*10*8) */
+	mtsdram_as(SDRAM_MB0CF, 0x00006701);
+
+	/* SET SDRAM_MB1CF - Not enabled */
+	mtsdram_as(SDRAM_MB1CF, 0x00000000);
+
+	/* SET SDRAM_MB2CF  - Not enabled */
+	mtsdram_as(SDRAM_MB2CF, 0x00000000);
+
+	/* SET SDRAM_MB3CF  - Not enabled */
+	mtsdram_as(SDRAM_MB3CF, 0x00000000);
+
+	/* SDRAM_CLKTR: Adv Addr clock by 90 deg */
+	mtsdram_as(SDRAM_CLKTR, 0x80000000);
+
+	/* Refresh Time register (0x30) Refresh every 7.8125uS */
+	mtsdram_as(SDRAM_RTR, 0x06180000);
+
+	/* SDRAM_SDTR1 */
+	mtsdram_as(SDRAM_SDTR1, 0x80201000);
+
+	/* SDRAM_SDTR2	*/
+	mtsdram_as(SDRAM_SDTR2, 0x32204232);
+
+	/* SDRAM_SDTR3	*/
+	mtsdram_as(SDRAM_SDTR3, 0x080b0d1a);
+
+	mtsdram_as(SDRAM_MMODE, 0x00000442);
+	mtsdram_as(SDRAM_MEMODE, 0x00000404);
+
+	/* SDRAM0_MCOPT1 (0X20) No ECC Gen */
+	mtsdram_as(SDRAM_MCOPT1, 0x04322000);
+
+	/* NOP */
+	mtsdram_as(SDRAM_INITPLR0, 0xa8380000);
+	/* precharge 3 DDR clock cycle */
+	mtsdram_as(SDRAM_INITPLR1, 0x81900400);
+	/* EMR2 twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR2, 0x81020000);
+	/* EMR3  twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR3, 0x81030000);
+	/* EMR DLL ENABLE twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR4, 0x81010404);
+	/* MR w/ DLL reset
+	 * Note: 5 is CL.  May need to be changed
+	 */
+	mtsdram_as(SDRAM_INITPLR5, 0x81000542);
+	/* precharge 3 DDR clock cycle */
+	mtsdram_as(SDRAM_INITPLR6, 0x81900400);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram_as(SDRAM_INITPLR7, 0x8D080000);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram_as(SDRAM_INITPLR8, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram_as(SDRAM_INITPLR9, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram_as(SDRAM_INITPLR10, 0x8D080000);
+	/* MRS - normal operation; wait 2 cycle (set wait to tMRD) */
+	mtsdram_as(SDRAM_INITPLR11, 0x81000442);
+	mtsdram_as(SDRAM_INITPLR12, 0x81010780);
+	mtsdram_as(SDRAM_INITPLR13, 0x81010400);
+	mtsdram_as(SDRAM_INITPLR14, 0x00000000);
+	mtsdram_as(SDRAM_INITPLR15, 0x00000000);
+
+	/* SET MCIF0_CODT   Die Termination On */
+	mtsdram_as(SDRAM_CODT, 0x0080f837);
+	mtsdram_as(SDRAM_MODT0, 0x01800000);
+	mtsdram_as(SDRAM_MODT1, 0x00000000);
+
+	mtsdram_as(SDRAM_WRDTR, 0x00000000);
+
+	/* SDRAM0_MCOPT2 (0X21) Start initialization */
+	mtsdram_as(SDRAM_MCOPT2, 0x20000000);
+
+	/* Step 5 */
+	lis     r3,0x1	/* 400000 =  wait 100ms */
+	mtctr   r3
+
+pll_wait:
+	bdnz	pll_wait
+
+	/* Step 6 */
+
+	/* SDRAM_DLCR */
+	mtsdram_as(SDRAM_DLCR, 0x030000a5);
+
+	/* SDRAM_RDCC */
+	mtsdram_as(SDRAM_RDCC, 0x40000000);
+
+	/* SDRAM_RQDC */
+	mtsdram_as(SDRAM_RQDC, 0x80000038);
+
+	/* SDRAM_RFDC */
+	mtsdram_as(SDRAM_RFDC, 0x00000209);
+
+	/* Enable memory controller */
+	mtsdram_as(SDRAM_MCOPT2, 0x28000000);
+#endif /* #ifndef CONFIG_NAND_U_BOOT */
+
+	blr

board/amcc/kilauea/kilauea.c

@@ -0,0 +1,392 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <ppc405.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_PCI)
+#include <pci.h>
+#include <asm/4xx_pcie.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+/*
+ * Board early initialization function
+ */
+int board_early_init_f (void)
+{
+	u32 val;
+
+	/*--------------------------------------------------------------------+
+	 | Interrupt controller setup for the AMCC 405EX(r) PINE evaluation board.
+	 +--------------------------------------------------------------------+
+	+---------------------------------------------------------------------+
+	|Interrupt| Source                            | Pol.  | Sensi.| Crit. |
+	+---------+-----------------------------------+-------+-------+-------+
+	| IRQ 00  | UART0                             | High  | Level | Non   |
+	| IRQ 01  | UART1                             | High  | Level | Non   |
+	| IRQ 02  | IIC0                              | High  | Level | Non   |
+	| IRQ 03  | TBD                               | High  | Level | Non   |
+	| IRQ 04  | TBD                               | High  | Level | Non   |
+	| IRQ 05  | EBM                               | High  | Level | Non   |
+	| IRQ 06  | BGI                               | High  | Level | Non   |
+	| IRQ 07  | IIC1                              | Rising| Edge  | Non   |
+	| IRQ 08  | SPI                               | High  | Lvl/ed| Non   |
+	| IRQ 09  | External IRQ 0 - (PCI-Express)    | pgm H | Pgm   | Non   |
+	| IRQ 10  | MAL TX EOB                        | High  | Level | Non   |
+	| IRQ 11  | MAL RX EOB                        | High  | Level | Non   |
+	| IRQ 12  | DMA Channel 0 FIFO Full           | High  | Level | Non   |
+	| IRQ 13  | DMA Channel 0 Stat FIFO           | High  | Level | Non   |
+	| IRQ 14  | DMA Channel 1 FIFO Full           | High  | Level | Non   |
+	| IRQ 15  | DMA Channel 1 Stat FIFO           | High  | Level | Non   |
+	| IRQ 16  | PCIE0 AL                          | high  | Level | Non   |
+	| IRQ 17  | PCIE0 VPD access                  | rising| Edge  | Non   |
+	| IRQ 18  | PCIE0 hot reset request           | rising| Edge  | Non   |
+	| IRQ 19  | PCIE0 hot reset request           | faling| Edge  | Non   |
+	| IRQ 20  | PCIE0 TCR                         | High  | Level | Non   |
+	| IRQ 21  | PCIE0 MSI level0                  | High  | Level | Non   |
+	| IRQ 22  | PCIE0 MSI level1                  | High  | Level | Non   |
+	| IRQ 23  | Security EIP-94                   | High  | Level | Non   |
+	| IRQ 24  | EMAC0 interrupt                   | High  | Level | Non   |
+	| IRQ 25  | EMAC1 interrupt                   | High  | Level | Non   |
+	| IRQ 26  | PCIE0 MSI level2                  | High  | Level | Non   |
+	| IRQ 27  | External IRQ 4                    | pgm H | Pgm   | Non   |
+	| IRQ 28  | UIC2 Non-critical Int.            | High  | Level | Non   |
+	| IRQ 29  | UIC2 Critical Interrupt           | High  | Level | Crit. |
+	| IRQ 30  | UIC1 Non-critical Int.            | High  | Level | Non   |
+	| IRQ 31  | UIC1 Critical Interrupt           | High  | Level | Crit. |
+	|----------------------------------------------------------------------
+	| IRQ 32  | MAL Serr                          | High  | Level | Non   |
+	| IRQ 33  | MAL Txde                          | High  | Level | Non   |
+	| IRQ 34  | MAL Rxde                          | High  | Level | Non   |
+	| IRQ 35  | PCIE0 bus master VC0              |falling| Edge  | Non   |
+	| IRQ 36  | PCIE0 DCR Error                   | High  | Level | Non   |
+	| IRQ 37  | EBC                               | High  |Lvl Edg| Non   |
+	| IRQ 38  | NDFC                              | High  | Level | Non   |
+	| IRQ 39  | GPT Compare Timer 8               | Risin | Edge  | Non   |
+	| IRQ 40  | GPT Compare Timer 9               | Risin | Edge  | Non   |
+	| IRQ 41  | PCIE1 AL                          | high  | Level | Non   |
+	| IRQ 42  | PCIE1 VPD access                  | rising| edge  | Non   |
+	| IRQ 43  | PCIE1 hot reset request           | rising| Edge  | Non   |
+	| IRQ 44  | PCIE1 hot reset request           | faling| Edge  | Non   |
+	| IRQ 45  | PCIE1 TCR                         | High  | Level | Non   |
+	| IRQ 46  | PCIE1 bus master VC0              |falling| Edge  | Non   |
+	| IRQ 47  | GPT Compare Timer 3               | Risin | Edge  | Non   |
+	| IRQ 48  | GPT Compare Timer 4               | Risin | Edge  | Non   |
+	| IRQ 49  | Ext. IRQ 7                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 50  | Ext. IRQ 8 -                      |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 51  | Ext. IRQ 9                        |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 52  | GPT Compare Timer 5               | high  | Edge  | Non   |
+	| IRQ 53  | GPT Compare Timer 6               | high  | Edge  | Non   |
+	| IRQ 54  | GPT Compare Timer 7               | high  | Edge  | Non   |
+	| IRQ 55  | Serial ROM                        | High  | Level | Non   |
+	| IRQ 56  | GPT Decrement Pulse               | High  | Level | Non   |
+	| IRQ 57  | Ext. IRQ 2                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 58  | Ext. IRQ 5                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 59  | Ext. IRQ 6                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 60  | EMAC0 Wake-up                     | High  | Level | Non   |
+	| IRQ 61  | Ext. IRQ 1                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 62  | EMAC1 Wake-up                     | High  | Level | Non   |
+	|----------------------------------------------------------------------
+	| IRQ 64  | PE0 AL                            | High  | Level | Non   |
+	| IRQ 65  | PE0 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 66  | PE0 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 67  | PE0 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 68  | PE0 TCR                           | High  | Level | Non   |
+	| IRQ 69  | PE0 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 70  | PE0 DCR Error                     | High  | Level | Non   |
+	| IRQ 71  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 72  | PE1 AL                            | High  | Level | Non   |
+	| IRQ 73  | PE1 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 74  | PE1 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 75  | PE1 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 76  | PE1 TCR                           | High  | Level | Non   |
+	| IRQ 77  | PE1 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 78  | PE1 DCR Error                     | High  | Level | Non   |
+	| IRQ 79  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 80  | PE2 AL                            | High  | Level | Non   |
+	| IRQ 81  | PE2 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 82  | PE2 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 83  | PE2 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 84  | PE2 TCR                           | High  | Level | Non   |
+	| IRQ 85  | PE2 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 86  | PE2 DCR Error                     | High  | Level | Non   |
+	| IRQ 87  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 88  | External IRQ(5)                   | Progr | Progr | Non   |
+	| IRQ 89  | External IRQ 4 - Ethernet         | Progr | Progr | Non   |
+	| IRQ 90  | External IRQ 3 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 91  | External IRQ 2 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 92  | External IRQ 1 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 93  | External IRQ 0 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 94  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 95  | Reserved                          | N/A   | N/A   | Non   |
+	|---------------------------------------------------------------------
+	+---------+-----------------------------------+-------+-------+------*/
+	/*--------------------------------------------------------------------+
+	 | Initialise UIC registers.  Clear all interrupts.  Disable all
+	 | interrupts.
+	 | Set critical interrupt values.  Set interrupt polarities.  Set
+	 | interrupt trigger levels.  Make bit 0 High  priority.  Clear all
+	 | interrupts again.
+	 +-------------------------------------------------------------------*/
+
+	mtdcr (uic2sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic2er, 0x00000000);	/* disable all interrupts */
+	mtdcr (uic2cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic2pr, 0xf7ffffff);	/* Set Interrupt Polarities */
+	mtdcr (uic2tr, 0x01e1fff8);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic2vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic2sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic2sr, 0xffffffff);	/* clear all interrupts */
+
+	mtdcr (uic1sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic1er, 0x00000000);	/* disable all interrupts */
+	mtdcr (uic1cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic1pr, 0xfffac785);	/* Set Interrupt Polarities */
+	mtdcr (uic1tr, 0x001d0040);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic1vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic1sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic1sr, 0xffffffff);	/* clear all interrupts */
+
+	mtdcr (uic0sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic0er, 0x0000000a);	/* Disable all interrupts */
+					/* Except cascade UIC0 and UIC1 */
+	mtdcr (uic0cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic0pr, 0xffbfefef);	/* Set Interrupt Polarities */
+	mtdcr (uic0tr, 0x00007000);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic0vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic0sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic0sr, 0xffffffff);	/* clear all interrupts */
+
+	/*
+	 * Note: Some cores are still in reset when the chip starts, so
+	 * take them out of reset
+	 */
+	mtsdr(SDR0_SRST, 0);
+
+	/*
+	 * Configure FPGA register with PCIe reset
+	 */
+	out_be32((void *)CFG_FPGA_BASE, 0xff570cc0);	/* assert PCIe reset */
+	mdelay(50);
+	out_be32((void *)CFG_FPGA_BASE, 0xff570cc3);	/* deassert PCIe reset */
+
+	/* Configure 405EX for NAND usage */
+	val = SDR0_CUST0_MUX_NDFC_SEL |
+		SDR0_CUST0_NDFC_ENABLE |
+		SDR0_CUST0_NDFC_BW_8_BIT |
+		SDR0_CUST0_NRB_BUSY |
+		(0x80000000 >> (28 + CFG_NAND_CS));
+	mtsdr(SDR0_CUST0, val);
+
+	/*
+	 * Configure PFC (Pin Function Control) registers
+	 * -> Enable USB
+	 */
+	val = SDR0_PFC1_USBEN | SDR0_PFC1_USBBIGEN | SDR0_PFC1_GPT_FREQ;
+	mtsdr(SDR0_PFC1, val);
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+#ifdef CFG_ENV_IS_IN_FLASH
+	/* Monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      -CFG_MONITOR_LEN,
+		      0xffffffff,
+		      &flash_info[0]);
+#endif
+
+	return 0;
+}
+
+int board_emac_count(void)
+{
+	u32 pvr = get_pvr();
+
+	/*
+	 * 405EXr only has one EMAC interface, 405EX has two
+	 */
+	if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+		return 1;
+	else
+		return 2;
+}
+
+static int board_pcie_count(void)
+{
+	u32 pvr = get_pvr();
+
+	/*
+	 * 405EXr only has one EMAC interface, 405EX has two
+	 */
+	if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+		return 1;
+	else
+		return 2;
+}
+
+int checkboard (void)
+{
+	char *s = getenv("serial#");
+	u32 pvr = get_pvr();
+
+	if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+		printf("Board: Haleakala - AMCC PPC405EXr Evaluation Board");
+	else
+		printf("Board: Kilauea - AMCC PPC405EX Evaluation Board");
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return (0);
+}
+
+/*************************************************************************
+ *  pci_pre_init
+ *
+ *  This routine is called just prior to registering the hose and gives
+ *  the board the opportunity to check things. Returning a value of zero
+ *  indicates that things are bad & PCI initialization should be aborted.
+ *
+ *      Different boards may wish to customize the pci controller structure
+ *      (add regions, override default access routines, etc) or perform
+ *      certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int pci_pre_init(struct pci_controller * hose )
+{
+	return 0;
+}
+#endif  /* defined(CONFIG_PCI) */
+
+#ifdef CONFIG_PCI
+static struct pci_controller pcie_hose[2] = {{0},{0}};
+
+void pcie_setup_hoses(int busno)
+{
+	struct pci_controller *hose;
+	int i, bus;
+	int ret = 0;
+	bus = busno;
+	char *env;
+	unsigned int delay;
+
+	for (i = 0; i < board_pcie_count(); i++) {
+
+		if (is_end_point(i))
+			ret = ppc4xx_init_pcie_endport(i);
+		else
+			ret = ppc4xx_init_pcie_rootport(i);
+		if (ret) {
+			printf("PCIE%d: initialization as %s failed\n", i,
+			       is_end_point(i) ? "endpoint" : "root-complex");
+			continue;
+		}
+
+		hose = &pcie_hose[i];
+		hose->first_busno = bus;
+		hose->last_busno = bus;
+		hose->current_busno = bus;
+
+		/* setup mem resource */
+		pci_set_region(hose->regions + 0,
+			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+			       CFG_PCIE_MEMSIZE,
+			       PCI_REGION_MEM);
+		hose->region_count = 1;
+		pci_register_hose(hose);
+
+		if (is_end_point(i)) {
+		    	ppc4xx_setup_pcie_endpoint(hose, i);
+			/*
+			 * Reson for no scanning is endpoint can not generate
+			 * upstream configuration accesses.
+		    	 */
+		} else {
+		    	ppc4xx_setup_pcie_rootpoint(hose, i);
+			env = getenv ("pciscandelay");
+		    	if (env != NULL) {
+			    	delay = simple_strtoul(env, NULL, 10);
+				if (delay > 5)
+				    	printf("Warning, expect noticable delay before "
+					       "PCIe scan due to 'pciscandelay' value!\n");
+				mdelay(delay * 1000);
+			}
+
+		    	/*
+		     	 * Config access can only go down stream
+		     	 */
+		    	hose->last_busno = pci_hose_scan(hose);
+		    	bus = hose->last_busno + 1;
+		}
+	}
+}
+#endif
+
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+	return 0;	/* No hotkeys supported */
+}
+#endif /* CONFIG_POST */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 val[4];
+	int rc;
+
+	ft_cpu_setup(blob, bd);
+
+	/* Fixup NOR mapping */
+	val[0] = 0;				/* chip select number */
+	val[1] = 0;				/* always 0 */
+	val[2] = gd->bd->bi_flashstart;
+	val[3] = gd->bd->bi_flashsize;
+	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+				  val, sizeof(val), 1);
+	if (rc)
+		printf("Unable to update property NOR mapping, err=%s\n",
+		       fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */

board/amcc/kilauea/memory.c

@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <i2c.h>
+
+void sdram_init(void)
+{
+	return;
+}
+
+long int initdram(int board_type)
+{
+	return (CFG_MBYTES_SDRAM << 20);
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+    printf ("testdram\n");
+#if defined (CONFIG_NAND_U_BOOT)
+    return 0;
+#endif
+	uint *pstart = (uint *) 0x00000000;
+	uint *pend = (uint *) 0x00001000;
+	uint *p;
+
+	for (p = pstart; p < pend; p++) {
+		*p = 0xaaaaaaaa;
+	}
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+#if !defined (CONFIG_NAND_SPL)
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+#endif
+			return 1;
+		}
+	}
+
+	for (p = pstart; p < pend; p++) {
+		*p = 0x55555555;
+	}
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+#if !defined (CONFIG_NAND_SPL)
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+#endif
+			return 1;
+		}
+	}
+#if !defined (CONFIG_NAND_SPL)
+	printf ("SDRAM test passed!!!\n");
+#endif
+	return 0;
+}
+#endif

board/amcc/kilauea/u-boot-nand.lds

@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+
+    /* Align to next NAND block */
+    . = ALIGN(0x4000);
+    common/environment.o  (.ppcenv)
+    /* Keep some space here for redundant env and potential bad env blocks */
+    . = ALIGN(0x10000);
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+
+  _end = . ;
+  PROVIDE (end = .);
+}

board/amcc/kilauea/u-boot.lds

@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+/* To compile successfully, uncomment the following section.
+ * To go in ram, remove the section.
+ * Added by SunHe.
+ */
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/ppc4xx/start.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}

board/amcc/luan/luan.c

@@ -39,6 +39,8 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
  ************************************************************************/
 int board_early_init_f(void)
 {
+	u32 mfr;
+
 	mtebc( pb0ap,  0x03800000 );	/* set chip selects */
 	mtebc( pb0cr,  0xffc58000 );	/* ebc0_b0cr, 4MB at 0xffc00000 CS0 */
 	mtebc( pb1ap,  0x03800000 );
@@ -64,6 +66,10 @@ int board_early_init_f(void)
 	mtdcr( uic0sr, 0x00000000 );	/* clear all interrupts */
 	mtdcr( uic0sr, 0xffffffff );
 
+	mfsdr(sdr_mfr, mfr);
+	mfr |= SDR0_MFR_FIXD;		/* Workaround for PCI/DMA */
+	mtsdr(sdr_mfr, mfr);
+
 	return  0;
 }
 

board/amcc/makalu/Makefile

@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o cmd_pll.o memory.o
+SOBJS	= init.o
+
+SRCS 	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend *~
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/amcc/makalu/cmd_pll.c

@@ -0,0 +1,297 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/*
+ * ehnus: change pll frequency.
+ * Wed Sep  5 11:45:17 CST 2007
+ * hsun@udtech.com.cn
+ */
+
+
+#include <common.h>
+#include <config.h>
+#include <command.h>
+#include <i2c.h>
+
+#ifdef CONFIG_CMD_EEPROM
+
+#define EEPROM_CONF_OFFSET		0
+#define EEPROM_TEST_OFFSET		16
+#define EEPROM_SDSTP_PARAM		16
+
+#define PLL_NAME_MAX			12
+#define BUF_STEP			8
+
+/* eeprom_wirtes 8Byte per op. */
+#define EEPROM_ALTER_FREQ(freq)						\
+	do {								\
+		int __i;						\
+		for (__i = 0; __i < 2; __i++)				\
+			eeprom_write (CFG_I2C_EEPROM_ADDR,		\
+				      EEPROM_CONF_OFFSET + __i*BUF_STEP, \
+				      pll_select[freq],			\
+				      BUF_STEP + __i*BUF_STEP);		\
+	} while (0)
+
+#define PDEBUG
+#ifdef	PDEBUG
+#define PLL_DEBUG	pll_debug(EEPROM_CONF_OFFSET)
+#else
+#define PLL_DEBUG
+#endif
+
+typedef enum {
+	PLL_ebc20,
+	PLL_333,
+	PLL_4001,
+	PLL_4002,
+	PLL_533,
+	PLL_600,
+	PLL_666,	/* For now, kilauea can't support */
+	RCONF,
+	WTEST,
+	PLL_TOTAL
+} pll_freq_t;
+
+static const char
+pll_name[][PLL_NAME_MAX] = {
+	"PLL_ebc20",
+	"PLL_333",
+	"PLL_400@1",
+	"PLL_400@2",
+	"PLL_533",
+	"PLL_600",
+	"PLL_666",
+	"RCONF",
+	"WTEST",
+	""
+};
+
+/*
+ * ehnus:
+ */
+static uchar
+pll_select[][EEPROM_SDSTP_PARAM] = {
+	/* 0: CPU 333MHz EBC 20MHz, for test only */
+	{
+		0x8c, 0x12, 0xec, 0x12, 0x88, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 0: 333 */
+	{
+		0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 1: 400_266 */
+	{
+		0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 2: 400 */
+	{
+		0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 3: 533 */
+	{
+		0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 4: 600 */
+	{
+		0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 5: 666 */
+	{
+		0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	{}
+};
+
+static uchar
+testbuf[EEPROM_SDSTP_PARAM] = {
+	0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77,
+	0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff
+};
+
+static void
+pll_debug(int off)
+{
+	int i;
+	uchar buffer[EEPROM_SDSTP_PARAM];
+
+	memset(buffer, 0, sizeof(buffer));
+	eeprom_read(CFG_I2C_EEPROM_ADDR, off,
+		    buffer, EEPROM_SDSTP_PARAM);
+
+	printf("Debug: SDSTP[0-3] at offset \"0x%02x\" lists as follows: \n", off);
+	for (i = 0; i < EEPROM_SDSTP_PARAM; i++)
+		printf("%02x ", buffer[i]);
+	printf("\n");
+}
+
+static void
+test_write(void)
+{
+	printf("Debug: test eeprom_write ... ");
+
+	/*
+	 * Write twice, 8 bytes per write
+	 */
+	eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET,
+		      testbuf, 8);
+	eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8,
+		      testbuf, 16);
+	printf("done\n");
+
+	pll_debug(EEPROM_TEST_OFFSET);
+}
+
+int
+do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	char c = '\0';
+	pll_freq_t pll_freq;
+	if (argc < 2) {
+		printf("Usage: \n%s\n", cmdtp->usage);
+		goto ret;
+	}
+
+	for (pll_freq = PLL_ebc20; pll_freq < PLL_TOTAL; pll_freq++)
+		if (!strcmp(pll_name[pll_freq], argv[1]))
+			break;
+
+	switch (pll_freq) {
+	case PLL_ebc20:
+	case PLL_333:
+	case PLL_4001:
+	case PLL_4002:
+	case PLL_533:
+	case PLL_600:
+		EEPROM_ALTER_FREQ(pll_freq);
+		break;
+
+	case PLL_666:		/* not support */
+		printf("Choose this option will result in a boot failure."
+		       "\nContinue? (Y/N): ");
+
+		c = getc(); putc('\n');
+
+		if ((c == 'y') || (c == 'Y')) {
+			EEPROM_ALTER_FREQ(pll_freq);
+			break;
+		}
+		goto ret;
+
+	case RCONF:
+		pll_debug(EEPROM_CONF_OFFSET);
+		goto ret;
+	case WTEST:
+		printf("DEBUG: write test\n");
+		test_write();
+		goto ret;
+
+	default:
+		printf("Invalid options"
+		       "\n\nUsage: \n%s\n", cmdtp->usage);
+		goto ret;
+	}
+
+	printf("PLL set to %s, "
+	       "reset the board to take effect\n", pll_name[pll_freq]);
+
+	PLL_DEBUG;
+ret:
+	return 0;
+}
+
+U_BOOT_CMD(
+	pllalter, CFG_MAXARGS, 1,        do_pll_alter,
+	"pllalter- change pll frequence \n",
+	"pllalter <selection>      - change pll frequence \n\n\
+	** New freq take effect after reset. ** \n\
+	----------------------------------------------\n\
+	PLL_ebc20: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	Same as PLL_333	\n\
+	\t	except          \n\
+	\t	EBC: 20 MHz     \n\
+	----------------------------------------------\n\
+	PLL_333: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 666 MHz  \n\
+	\t	CPU: 333 MHz  \n\
+	\t	PLB: 166 MHz  \n\
+	\t	OPB: 83 MHz   \n\
+	\t	DDR: 83 MHz   \n\
+	------------------------------------------------\n\
+	PLL_400@1: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 800 MHz  \n\
+	\t	CPU: 400 MHz  \n\
+	\t	PLB: 133 MHz  \n\
+	\t	OPB: 66  MHz  \n\
+	\t	DDR: 133 MHz  \n\
+	------------------------------------------------\n\
+	PLL_400@2: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 800 MHz  \n\
+	\t	CPU: 400 MHz  \n\
+	\t	PLB: 200 MHz  \n\
+	\t	OPB: 100 MHz  \n\
+	\t	DDR: 200 MHz  \n\
+	----------------------------------------------\n\
+	PLL_533: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1066 MHz  \n\
+	\t	CPU: 533  MHz  \n\
+	\t	PLB: 177  MHz  \n\
+	\t	OPB: 88   MHz  \n\
+	\t	DDR: 177  MHz  \n\
+	----------------------------------------------\n\
+	PLL_600: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1200 MHz  \n\
+	\t	CPU: 600  MHz  \n\
+	\t	PLB: 200  MHz  \n\
+	\t	OPB: 100  MHz  \n\
+	\t	DDR: 200  MHz  \n\
+	----------------------------------------------\n\
+	PLL_666: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1333 MHz  \n\
+	\t	CPU: 666  MHz  \n\
+	\t	PLB: 166  MHz  \n\
+	\t	OPB: 83   MHz  \n\
+	\t	DDR: 166  MHz  \n\
+	-----------------------------------------------\n\
+	RCONF: Read current eeprom configuration.      \n\
+	-----------------------------------------------\n\
+	WTEST: Test EEPROM write with predefined values\n\
+	-----------------------------------------------\n"
+	);
+
+#endif	/* (CONFIG_COMMANDS & CFG_CMD_EEPROM) */

board/amcc/makalu/config.mk

@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2002-2007
+# (C) Copyright 2000
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -21,9 +21,4 @@
 # MA 02111-1307 USA
 #
 
-
+TEXT_BASE = 0xFFFA0000
-LIB	= libpostlwmon5.a
-
-COBJS	= ecc.o
-
-include $(TOPDIR)/post/rules.mk

board/amcc/makalu/init.S

@@ -0,0 +1,148 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Based on code provided from Senao and AMCC
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <ppc4xx.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#define mtsdram_as(reg, value)	 	\
+	addi    r4,0,reg	;     	\
+	mtdcr   memcfga,r4	;	\
+	addis   r4,0,value@h 	;	\
+	ori     r4,r4,value@l	;	\
+	mtdcr   memcfgd,r4	;
+
+	.globl  ext_bus_cntlr_init
+ext_bus_cntlr_init:
+
+	/*
+	 * DDR2 setup
+	 */
+
+	/* Following the DDR Core Manual, here is the initialization */
+
+	/* Step 1 */
+
+	/* Step 2 */
+
+	/* Step 3 */
+
+	/* base=00000000, size=128MByte (5), mode=2 (n*10*4) */
+	mtsdram_as(SDRAM_MB0CF, 0x00005201);
+
+	/* base=08000000, size=128MByte (5), mode=2 (n*10*4) */
+	mtsdram_as(SDRAM_MB1CF, (0x08000000 >> 3) | 0x5201);
+
+	/* SDRAM_CLKTR: Adv Addr clock by 90 deg */
+	mtsdram_as(SDRAM_CLKTR,0x80000000);
+
+	/* Refresh Time register (0x30) Refresh every 7.8125uS */
+	mtsdram_as(SDRAM_RTR, 0x06180000);
+
+	/* SDRAM_SDTR1 */
+	mtsdram_as(SDRAM_SDTR1, 0x80201000);
+
+	/* SDRAM_SDTR2	*/
+	mtsdram_as(SDRAM_SDTR2, 0x32204232);
+
+	/* SDRAM_SDTR3	*/
+	mtsdram_as(SDRAM_SDTR3, 0x080b0d1a);
+
+	mtsdram_as(SDRAM_MMODE, 0x00000442);
+	mtsdram_as(SDRAM_MEMODE, 0x00000404);
+
+	/* SDRAM0_MCOPT1 (0X20) No ECC Gen */
+	mtsdram_as(SDRAM_MCOPT1, 0x04322000);
+
+	/* NOP */
+	mtsdram_as(SDRAM_INITPLR0, 0xa8380000);
+	/* precharge 3 DDR clock cycle */
+	mtsdram_as(SDRAM_INITPLR1, 0x81900400);
+	/* EMR2 twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR2, 0x81020000);
+	/* EMR3  twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR3, 0x81030000);
+	/* EMR DLL ENABLE twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR4, 0x81010404);
+	/* MR w/ DLL reset
+	 * Note: 5 is CL.  May need to be changed
+	 */
+	mtsdram_as(SDRAM_INITPLR5, 0x81000542);
+	/* precharge 3 DDR clock cycle */
+	mtsdram_as(SDRAM_INITPLR6, 0x81900400);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram_as(SDRAM_INITPLR7, 0x8D080000);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram_as(SDRAM_INITPLR8, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram_as(SDRAM_INITPLR9, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram_as(SDRAM_INITPLR10, 0x8D080000);
+	/* MRS - normal operation; wait 2 cycle (set wait to tMRD) */
+	mtsdram_as(SDRAM_INITPLR11, 0x81000442);
+	mtsdram_as(SDRAM_INITPLR12, 0x81010780);
+	mtsdram_as(SDRAM_INITPLR13, 0x81010400);
+	mtsdram_as(SDRAM_INITPLR14, 0x00000000);
+	mtsdram_as(SDRAM_INITPLR15, 0x00000000);
+
+	/* SET MCIF0_CODT   Die Termination On */
+	mtsdram_as(SDRAM_CODT, 0x0080f837);
+	mtsdram_as(SDRAM_MODT0, 0x01800000);
+#if 0 /* test-only: not sure if 0 is ok when 2nd bank is used */
+	mtsdram_as(SDRAM_MODT1, 0x00000000);
+#endif
+
+	mtsdram_as(SDRAM_WRDTR, 0x00000000);
+
+	/* SDRAM0_MCOPT2 (0X21) Start initialization */
+	mtsdram_as(SDRAM_MCOPT2, 0x20000000);
+
+	/* Step 5 */
+	lis     r3,0x1	/* 400000 =  wait 100ms */
+	mtctr   r3
+
+pll_wait:
+	bdnz	pll_wait
+
+	/* Step 6 */
+
+	/* SDRAM_DLCR */
+	mtsdram_as(SDRAM_DLCR, 0x030000a5);
+
+	/* SDRAM_RDCC */
+	mtsdram_as(SDRAM_RDCC, 0x40000000);
+
+	/* SDRAM_RQDC */
+	mtsdram_as(SDRAM_RQDC, 0x80000038);
+
+	/* SDRAM_RFDC */
+	mtsdram_as(SDRAM_RFDC, 0x00000209);
+
+	/* Enable memory controller */
+	mtsdram_as(SDRAM_MCOPT2, 0x28000000);
+
+	blr

board/amcc/makalu/makalu.c

@@ -0,0 +1,352 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <ppc405.h>
+#include <libfdt.h>
+#include <asm/processor.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_PCI)
+#include <pci.h>
+#include <asm/4xx_pcie.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+/*
+ * Board early initialization function
+ */
+int board_early_init_f (void)
+{
+	u32 val;
+
+	/*--------------------------------------------------------------------+
+	 | Interrupt controller setup for the AMCC 405EX(r) PINE evaluation board.
+	 +--------------------------------------------------------------------+
+	+---------------------------------------------------------------------+
+	|Interrupt| Source                            | Pol.  | Sensi.| Crit. |
+	+---------+-----------------------------------+-------+-------+-------+
+	| IRQ 00  | UART0                             | High  | Level | Non   |
+	| IRQ 01  | UART1                             | High  | Level | Non   |
+	| IRQ 02  | IIC0                              | High  | Level | Non   |
+	| IRQ 03  | TBD                               | High  | Level | Non   |
+	| IRQ 04  | TBD                               | High  | Level | Non   |
+	| IRQ 05  | EBM                               | High  | Level | Non   |
+	| IRQ 06  | BGI                               | High  | Level | Non   |
+	| IRQ 07  | IIC1                              | Rising| Edge  | Non   |
+	| IRQ 08  | SPI                               | High  | Lvl/ed| Non   |
+	| IRQ 09  | External IRQ 0 - (PCI-Express)    | pgm H | Pgm   | Non   |
+	| IRQ 10  | MAL TX EOB                        | High  | Level | Non   |
+	| IRQ 11  | MAL RX EOB                        | High  | Level | Non   |
+	| IRQ 12  | DMA Channel 0 FIFO Full           | High  | Level | Non   |
+	| IRQ 13  | DMA Channel 0 Stat FIFO           | High  | Level | Non   |
+	| IRQ 14  | DMA Channel 1 FIFO Full           | High  | Level | Non   |
+	| IRQ 15  | DMA Channel 1 Stat FIFO           | High  | Level | Non   |
+	| IRQ 16  | PCIE0 AL                          | high  | Level | Non   |
+	| IRQ 17  | PCIE0 VPD access                  | rising| Edge  | Non   |
+	| IRQ 18  | PCIE0 hot reset request           | rising| Edge  | Non   |
+	| IRQ 19  | PCIE0 hot reset request           | faling| Edge  | Non   |
+	| IRQ 20  | PCIE0 TCR                         | High  | Level | Non   |
+	| IRQ 21  | PCIE0 MSI level0                  | High  | Level | Non   |
+	| IRQ 22  | PCIE0 MSI level1                  | High  | Level | Non   |
+	| IRQ 23  | Security EIP-94                   | High  | Level | Non   |
+	| IRQ 24  | EMAC0 interrupt                   | High  | Level | Non   |
+	| IRQ 25  | EMAC1 interrupt                   | High  | Level | Non   |
+	| IRQ 26  | PCIE0 MSI level2                  | High  | Level | Non   |
+	| IRQ 27  | External IRQ 4                    | pgm H | Pgm   | Non   |
+	| IRQ 28  | UIC2 Non-critical Int.            | High  | Level | Non   |
+	| IRQ 29  | UIC2 Critical Interrupt           | High  | Level | Crit. |
+	| IRQ 30  | UIC1 Non-critical Int.            | High  | Level | Non   |
+	| IRQ 31  | UIC1 Critical Interrupt           | High  | Level | Crit. |
+	|----------------------------------------------------------------------
+	| IRQ 32  | MAL Serr                          | High  | Level | Non   |
+	| IRQ 33  | MAL Txde                          | High  | Level | Non   |
+	| IRQ 34  | MAL Rxde                          | High  | Level | Non   |
+	| IRQ 35  | PCIE0 bus master VC0              |falling| Edge  | Non   |
+	| IRQ 36  | PCIE0 DCR Error                   | High  | Level | Non   |
+	| IRQ 37  | EBC                               | High  |Lvl Edg| Non   |
+	| IRQ 38  | NDFC                              | High  | Level | Non   |
+	| IRQ 39  | GPT Compare Timer 8               | Risin | Edge  | Non   |
+	| IRQ 40  | GPT Compare Timer 9               | Risin | Edge  | Non   |
+	| IRQ 41  | PCIE1 AL                          | high  | Level | Non   |
+	| IRQ 42  | PCIE1 VPD access                  | rising| edge  | Non   |
+	| IRQ 43  | PCIE1 hot reset request           | rising| Edge  | Non   |
+	| IRQ 44  | PCIE1 hot reset request           | faling| Edge  | Non   |
+	| IRQ 45  | PCIE1 TCR                         | High  | Level | Non   |
+	| IRQ 46  | PCIE1 bus master VC0              |falling| Edge  | Non   |
+	| IRQ 47  | GPT Compare Timer 3               | Risin | Edge  | Non   |
+	| IRQ 48  | GPT Compare Timer 4               | Risin | Edge  | Non   |
+	| IRQ 49  | Ext. IRQ 7                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 50  | Ext. IRQ 8 -                      |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 51  | Ext. IRQ 9                        |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 52  | GPT Compare Timer 5               | high  | Edge  | Non   |
+	| IRQ 53  | GPT Compare Timer 6               | high  | Edge  | Non   |
+	| IRQ 54  | GPT Compare Timer 7               | high  | Edge  | Non   |
+	| IRQ 55  | Serial ROM                        | High  | Level | Non   |
+	| IRQ 56  | GPT Decrement Pulse               | High  | Level | Non   |
+	| IRQ 57  | Ext. IRQ 2                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 58  | Ext. IRQ 5                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 59  | Ext. IRQ 6                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 60  | EMAC0 Wake-up                     | High  | Level | Non   |
+	| IRQ 61  | Ext. IRQ 1                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 62  | EMAC1 Wake-up                     | High  | Level | Non   |
+	|----------------------------------------------------------------------
+	| IRQ 64  | PE0 AL                            | High  | Level | Non   |
+	| IRQ 65  | PE0 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 66  | PE0 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 67  | PE0 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 68  | PE0 TCR                           | High  | Level | Non   |
+	| IRQ 69  | PE0 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 70  | PE0 DCR Error                     | High  | Level | Non   |
+	| IRQ 71  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 72  | PE1 AL                            | High  | Level | Non   |
+	| IRQ 73  | PE1 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 74  | PE1 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 75  | PE1 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 76  | PE1 TCR                           | High  | Level | Non   |
+	| IRQ 77  | PE1 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 78  | PE1 DCR Error                     | High  | Level | Non   |
+	| IRQ 79  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 80  | PE2 AL                            | High  | Level | Non   |
+	| IRQ 81  | PE2 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 82  | PE2 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 83  | PE2 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 84  | PE2 TCR                           | High  | Level | Non   |
+	| IRQ 85  | PE2 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 86  | PE2 DCR Error                     | High  | Level | Non   |
+	| IRQ 87  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 88  | External IRQ(5)                   | Progr | Progr | Non   |
+	| IRQ 89  | External IRQ 4 - Ethernet         | Progr | Progr | Non   |
+	| IRQ 90  | External IRQ 3 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 91  | External IRQ 2 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 92  | External IRQ 1 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 93  | External IRQ 0 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 94  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 95  | Reserved                          | N/A   | N/A   | Non   |
+	|---------------------------------------------------------------------
+	+---------+-----------------------------------+-------+-------+------*/
+	/*--------------------------------------------------------------------+
+	 | Initialise UIC registers.  Clear all interrupts.  Disable all
+	 | interrupts.
+	 | Set critical interrupt values.  Set interrupt polarities.  Set
+	 | interrupt trigger levels.  Make bit 0 High  priority.  Clear all
+	 | interrupts again.
+	 +-------------------------------------------------------------------*/
+
+	mtdcr (uic2sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic2er, 0x00000000);	/* disable all interrupts */
+	mtdcr (uic2cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic2pr, 0xf7ffffff);	/* Set Interrupt Polarities */
+	mtdcr (uic2tr, 0x01e1fff8);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic2vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic2sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic2sr, 0xffffffff);	/* clear all interrupts */
+
+	mtdcr (uic1sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic1er, 0x00000000);	/* disable all interrupts */
+	mtdcr (uic1cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic1pr, 0xfffac785);	/* Set Interrupt Polarities */
+	mtdcr (uic1tr, 0x001d0040);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic1vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic1sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic1sr, 0xffffffff);	/* clear all interrupts */
+
+	mtdcr (uic0sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic0er, 0x0000000a);	/* Disable all interrupts */
+					/* Except cascade UIC0 and UIC1 */
+	mtdcr (uic0cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic0pr, 0xffbfefef);	/* Set Interrupt Polarities */
+	mtdcr (uic0tr, 0x00007000);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic0vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic0sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic0sr, 0xffffffff);	/* clear all interrupts */
+
+	/*
+	 * Note: Some cores are still in reset when the chip starts, so
+	 * take them out of reset
+	 */
+	mtsdr(SDR0_SRST, 0);
+
+	/* Reset PCIe slots */
+	gpio_write_bit(CFG_GPIO_PCIE_RST, 0);
+	udelay(100);
+	gpio_write_bit(CFG_GPIO_PCIE_RST, 1);
+
+	/*
+	 * Configure PFC (Pin Function Control) registers
+	 * -> Enable USB
+	 */
+	val = SDR0_PFC1_USBEN | SDR0_PFC1_USBBIGEN | SDR0_PFC1_GPT_FREQ;
+	mtsdr(SDR0_PFC1, val);
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+#ifdef CFG_ENV_IS_IN_FLASH
+	/* Monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      -CFG_MONITOR_LEN,
+		      0xffffffff,
+		      &flash_info[0]);
+#endif
+
+	return 0;
+}
+
+int checkboard (void)
+{
+	char *s = getenv("serial#");
+
+	printf("Board: Makalu - AMCC PPC405EX Evaluation Board");
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return (0);
+}
+
+/*************************************************************************
+ *  pci_pre_init
+ *
+ *  This routine is called just prior to registering the hose and gives
+ *  the board the opportunity to check things. Returning a value of zero
+ *  indicates that things are bad & PCI initialization should be aborted.
+ *
+ *      Different boards may wish to customize the pci controller structure
+ *      (add regions, override default access routines, etc) or perform
+ *      certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int pci_pre_init(struct pci_controller * hose )
+{
+	return 0;
+}
+#endif  /* defined(CONFIG_PCI) */
+
+#ifdef CONFIG_PCI
+static struct pci_controller pcie_hose[2] = {{0},{0}};
+
+void pcie_setup_hoses(int busno)
+{
+	struct pci_controller *hose;
+	int i, bus;
+	int ret = 0;
+	bus = busno;
+	char *env;
+	unsigned int delay;
+
+	for (i = 0; i < 2; i++) {
+
+		if (is_end_point(i))
+			ret = ppc4xx_init_pcie_endport(i);
+		else
+			ret = ppc4xx_init_pcie_rootport(i);
+		if (ret) {
+			printf("PCIE%d: initialization as %s failed\n", i,
+			       is_end_point(i) ? "endpoint" : "root-complex");
+			continue;
+		}
+
+		hose = &pcie_hose[i];
+		hose->first_busno = bus;
+		hose->last_busno = bus;
+		hose->current_busno = bus;
+
+		/* setup mem resource */
+		pci_set_region(hose->regions + 0,
+			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+			       CFG_PCIE_MEMSIZE,
+			       PCI_REGION_MEM);
+		hose->region_count = 1;
+		pci_register_hose(hose);
+
+		if (is_end_point(i)) {
+		    	ppc4xx_setup_pcie_endpoint(hose, i);
+			/*
+			 * Reson for no scanning is endpoint can not generate
+			 * upstream configuration accesses.
+		    	 */
+		} else {
+		    	ppc4xx_setup_pcie_rootpoint(hose, i);
+			env = getenv ("pciscandelay");
+		    	if (env != NULL) {
+			    	delay = simple_strtoul(env, NULL, 10);
+				if (delay > 5)
+				    	printf("Warning, expect noticable delay before "
+					       "PCIe scan due to 'pciscandelay' value!\n");
+				mdelay(delay * 1000);
+			}
+
+		    	/*
+		     	 * Config access can only go down stream
+		     	 */
+		    	hose->last_busno = pci_hose_scan(hose);
+		    	bus = hose->last_busno + 1;
+		}
+	}
+}
+#endif
+
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+	return 0;	/* No hotkeys supported */
+}
+#endif /* CONFIG_POST */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 val[4];
+	int rc;
+
+	ft_cpu_setup(blob, bd);
+
+	/* Fixup NOR mapping */
+	val[0] = 0;				/* chip select number */
+	val[1] = 0;				/* always 0 */
+	val[2] = gd->bd->bi_flashstart;
+	val[3] = gd->bd->bi_flashsize;
+	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+				  val, sizeof(val), 1);
+	if (rc)
+		printf("Unable to update property NOR mapping, err=%s\n",
+		       fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */

board/amcc/makalu/memory.c

@@ -0,0 +1,188 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+void sdram_init(void)
+{
+	return;
+}
+
+long int initdram(int board_type)
+{
+	/*
+	 * Same as on Kilauea, Makalu generates exception 0x200
+	 * (machine check) after trap_init() in board_init_f,
+	 * when SDRAM is initialized here (late) and d-cache is
+	 * used earlier as INIT_RAM.
+	 * So for now, initialize DDR2 in init.S very early and
+	 * also use it for INIT_RAM. Then this exception doesn't
+	 * occur.
+	 */
+#if 0
+	u32 val;
+
+	/* base=00000000, size=128MByte (5), mode=2 (n*10*4) */
+	mtsdram(SDRAM_MB0CF, 0x00005201);
+
+	/* SET SDRAM_MB1CF - Not enabled */
+	mtsdram(SDRAM_MB1CF, 0x00000000);
+
+	/* SET SDRAM_MB2CF  - Not enabled */
+	mtsdram(SDRAM_MB2CF, 0x00000000);
+
+	/* SET SDRAM_MB3CF  - Not enabled */
+	mtsdram(SDRAM_MB3CF, 0x00000000);
+
+	/* SDRAM_CLKTR: Adv Addr clock by 90 deg */
+	mtsdram(SDRAM_CLKTR, 0x80000000);
+
+	/* Refresh Time register (0x30) Refresh every 7.8125uS */
+	mtsdram(SDRAM_RTR, 0x06180000);
+
+	/* SDRAM_SDTR1 */
+	mtsdram(SDRAM_SDTR1, 0x80201000);
+
+	/* SDRAM_SDTR2	*/
+	mtsdram(SDRAM_SDTR2, 0x32204232);
+
+	/* SDRAM_SDTR3	*/
+	mtsdram(SDRAM_SDTR3, 0x080b0d1a);
+
+	mtsdram(SDRAM_MMODE, 0x00000442);
+	mtsdram(SDRAM_MEMODE, 0x00000404);
+
+	/* SDRAM0_MCOPT1 (0X20) No ECC Gen */
+	mtsdram(SDRAM_MCOPT1, 0x04322000);
+
+	/* NOP */
+	mtsdram(SDRAM_INITPLR0, 0xa8380000);
+	/* precharge 3 DDR clock cycle */
+	mtsdram(SDRAM_INITPLR1, 0x81900400);
+	/* EMR2 twr = 2tck */
+	mtsdram(SDRAM_INITPLR2, 0x81020000);
+	/* EMR3  twr = 2tck */
+	mtsdram(SDRAM_INITPLR3, 0x81030000);
+	/* EMR DLL ENABLE twr = 2tck */
+	mtsdram(SDRAM_INITPLR4, 0x81010404);
+	/* MR w/ DLL reset
+	 * Note: 5 is CL.  May need to be changed
+	 */
+	mtsdram(SDRAM_INITPLR5, 0x81000542);
+	/* precharge 3 DDR clock cycle */
+	mtsdram(SDRAM_INITPLR6, 0x81900400);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram(SDRAM_INITPLR7, 0x8D080000);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram(SDRAM_INITPLR8, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram(SDRAM_INITPLR9, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram(SDRAM_INITPLR10, 0x8D080000);
+	/* MRS - normal operation; wait 2 cycle (set wait to tMRD) */
+	mtsdram(SDRAM_INITPLR11, 0x81000442);
+	mtsdram(SDRAM_INITPLR12, 0x81010780);
+	mtsdram(SDRAM_INITPLR13, 0x81010400);
+	mtsdram(SDRAM_INITPLR14, 0x00000000);
+	mtsdram(SDRAM_INITPLR15, 0x00000000);
+
+	/* SET MCIF0_CODT   Die Termination On */
+	mtsdram(SDRAM_CODT, 0x0080f837);
+	mtsdram(SDRAM_MODT0, 0x01800000);
+	mtsdram(SDRAM_MODT1, 0x00000000);
+
+	mtsdram(SDRAM_WRDTR, 0x00000000);
+
+	/* SDRAM0_MCOPT2 (0X21) Start initialization */
+	mtsdram(SDRAM_MCOPT2, 0x20000000);
+
+	/* Step 5 */
+	do {
+		mfsdram(SDRAM_MCSTAT, val);
+	} while ((val & SDRAM_MCSTAT_MIC_COMP) != SDRAM_MCSTAT_MIC_COMP);
+
+	/* Step 6 */
+
+	/* SDRAM_DLCR */
+	mtsdram(SDRAM_DLCR, 0x030000a5);
+
+	/* SDRAM_RDCC */
+	mtsdram(SDRAM_RDCC, 0x40000000);
+
+	/* SDRAM_RQDC */
+	mtsdram(SDRAM_RQDC, 0x80000038);
+
+	/* SDRAM_RFDC */
+	mtsdram(SDRAM_RFDC, 0x00000209);
+
+	/* Enable memory controller */
+	mfsdram(SDRAM_MCOPT2, val);
+	val |= SDRAM_MCOPT2_DCEN_ENABLE;
+	mtsdram(SDRAM_MCOPT2, val);
+#endif
+	return (CFG_MBYTES_SDRAM << 20);
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+    printf ("testdram\n");
+#if defined (CONFIG_NAND_U_BOOT)
+    return 0;
+#endif
+	uint *pstart = (uint *) 0x00000000;
+	uint *pend = (uint *) 0x00001000;
+	uint *p;
+
+	for (p = pstart; p < pend; p++) {
+		*p = 0xaaaaaaaa;
+	}
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+#if !defined (CONFIG_NAND_SPL)
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+#endif
+			return 1;
+		}
+	}
+
+	for (p = pstart; p < pend; p++) {
+		*p = 0x55555555;
+	}
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+#if !defined (CONFIG_NAND_SPL)
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+#endif
+			return 1;
+		}
+	}
+#if !defined (CONFIG_NAND_SPL)
+	printf ("SDRAM test passed!!!\n");
+#endif
+	return 0;
+}
+#endif

board/amcc/makalu/u-boot.lds

@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+/* To compile successfully, uncomment the following section.
+ * To go in ram, remove the section.
+ * Added by SunHe.
+ */
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/ppc4xx/start.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}

board/amcc/ocotea/u-boot.lds

@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o	(.text)
     board/amcc/ocotea/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)

board/amcc/sequoia/init.S

@@ -20,57 +20,9 @@
  */
 
 #include <ppc_asm.tmpl>
+#include <asm-ppc/mmu.h>
 #include <config.h>
 
-/* General */
-#define TLB_VALID   0x00000200
-#define _256M       0x10000000
-
-/* Supported page sizes */
-
-#define SZ_1K	    0x00000000
-#define SZ_4K	    0x00000010
-#define SZ_16K	    0x00000020
-#define SZ_64K	    0x00000030
-#define SZ_256K	    0x00000040
-#define SZ_1M	    0x00000050
-#define SZ_8M       0x00000060
-#define SZ_16M	    0x00000070
-#define SZ_256M	    0x00000090
-
-/* Storage attributes */
-#define SA_W	    0x00000800	    /* Write-through */
-#define SA_I	    0x00000400	    /* Caching inhibited */
-#define SA_M	    0x00000200	    /* Memory coherence */
-#define SA_G	    0x00000100	    /* Guarded */
-#define SA_E	    0x00000080	    /* Endian */
-
-/* Access control */
-#define AC_X	    0x00000024	    /* Execute */
-#define AC_W	    0x00000012	    /* Write */
-#define AC_R	    0x00000009	    /* Read */
-
-/* Some handy macros */
-
-#define EPN(e)		((e) & 0xfffffc00)
-#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a)		( (a)&0x00000fbf )
-
-#define tlbtab_start\
-	mflr    r1  ;\
-	bl 0f	    ;
-
-#define tlbtab_end\
-	.long 0, 0, 0	;   \
-0:	mflr    r0	;   \
-	mtlr    r1	;   \
-	blr		;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
-	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
-
 /**************************************************************************
  * TLB TABLE
  *
@@ -98,7 +50,11 @@ tlbtab:
 #endif
 
 	/* TLB-entry for DDR SDRAM (Up to 2GB) */
+#ifdef CONFIG_4xx_DCACHE
+	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G)
+#else
 	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+#endif
 
 #ifdef CFG_INIT_RAM_DCACHE
 	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */

board/amcc/sequoia/sdram.h

@@ -395,8 +395,8 @@
 #define DDR0_26_TRAS_MAX_ENCODE(n)          ((((unsigned long)(n))&0xFFFF)<<16)
 #define DDR0_26_TRAS_MAX_DECODE(n)          ((((unsigned long)(n))>>16)&0xFFFF)
 #define DDR0_26_TREF_MASK                 0x00003FFF
-#define DDR0_26_TREF_ENCODE(n)              ((((unsigned long)(n))&0x3FF)<<0)
+#define DDR0_26_TREF_ENCODE(n)              ((((unsigned long)(n))&0x3FFF)<<0)
-#define DDR0_26_TREF_DECODE(n)              ((((unsigned long)(n))>>0)&0x3FF)
+#define DDR0_26_TREF_DECODE(n)              ((((unsigned long)(n))>>0)&0x3FFF)
 
 #define DDR0_27                         0x1B
 #define DDR0_27_EMRS_DATA_MASK            0x3FFF0000

board/amcc/sequoia/sequoia.c

@@ -23,9 +23,11 @@
  */
 
 #include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <ppc440.h>
 #include <asm/processor.h>
 #include <asm/io.h>
-#include <ppc440.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -46,31 +48,31 @@ int board_early_init_f(void)
 	 * Setup the GPIO pins
 	 *-------------------------------------------------------------------*/
 	/* test-only: take GPIO init from pcs440ep ???? in config file */
-	out32(GPIO0_OR, 0x00000000);
+	out_be32((u32 *) GPIO0_OR, 0x00000000);
-	out32(GPIO0_TCR, 0x0000000f);
+	out_be32((u32 *) GPIO0_TCR, 0x0000000f);
-	out32(GPIO0_OSRL, 0x50015400);
+	out_be32((u32 *) GPIO0_OSRL, 0x50015400);
-	out32(GPIO0_OSRH, 0x550050aa);
+	out_be32((u32 *) GPIO0_OSRH, 0x550050aa);
-	out32(GPIO0_TSRL, 0x50015400);
+	out_be32((u32 *) GPIO0_TSRL, 0x50015400);
-	out32(GPIO0_TSRH, 0x55005000);
+	out_be32((u32 *) GPIO0_TSRH, 0x55005000);
-	out32(GPIO0_ISR1L, 0x50000000);
+	out_be32((u32 *) GPIO0_ISR1L, 0x50000000);
-	out32(GPIO0_ISR1H, 0x00000000);
+	out_be32((u32 *) GPIO0_ISR1H, 0x00000000);
-	out32(GPIO0_ISR2L, 0x00000000);
+	out_be32((u32 *) GPIO0_ISR2L, 0x00000000);
-	out32(GPIO0_ISR2H, 0x00000100);
+	out_be32((u32 *) GPIO0_ISR2H, 0x00000100);
-	out32(GPIO0_ISR3L, 0x00000000);
+	out_be32((u32 *) GPIO0_ISR3L, 0x00000000);
-	out32(GPIO0_ISR3H, 0x00000000);
+	out_be32((u32 *) GPIO0_ISR3H, 0x00000000);
 
-	out32(GPIO1_OR, 0x00000000);
+	out_be32((u32 *) GPIO1_OR, 0x00000000);
-	out32(GPIO1_TCR, 0xc2000000);
+	out_be32((u32 *) GPIO1_TCR, 0xc2000000);
-	out32(GPIO1_OSRL, 0x5c280000);
+	out_be32((u32 *) GPIO1_OSRL, 0x5c280000);
-	out32(GPIO1_OSRH, 0x00000000);
+	out_be32((u32 *) GPIO1_OSRH, 0x00000000);
-	out32(GPIO1_TSRL, 0x0c000000);
+	out_be32((u32 *) GPIO1_TSRL, 0x0c000000);
-	out32(GPIO1_TSRH, 0x00000000);
+	out_be32((u32 *) GPIO1_TSRH, 0x00000000);
-	out32(GPIO1_ISR1L, 0x00005550);
+	out_be32((u32 *) GPIO1_ISR1L, 0x00005550);
-	out32(GPIO1_ISR1H, 0x00000000);
+	out_be32((u32 *) GPIO1_ISR1H, 0x00000000);
-	out32(GPIO1_ISR2L, 0x00050000);
+	out_be32((u32 *) GPIO1_ISR2L, 0x00050000);
-	out32(GPIO1_ISR2H, 0x00000000);
+	out_be32((u32 *) GPIO1_ISR2H, 0x00000000);
-	out32(GPIO1_ISR3L, 0x01400000);
+	out_be32((u32 *) GPIO1_ISR3L, 0x01400000);
-	out32(GPIO1_ISR3H, 0x00000000);
+	out_be32((u32 *) GPIO1_ISR3H, 0x00000000);
 
 	/*--------------------------------------------------------------------
 	 * Setup the interrupt controller polarities, triggers, etc.
@@ -100,16 +102,16 @@ int board_early_init_f(void)
 	mtdcr(uic2sr, 0xffffffff);	/* clear all */
 
 	/* 50MHz tmrclk */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
+	out_8((u8 *) CFG_BCSR_BASE + 0x04, 0x00);
 
 	/* clear write protects */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
+	out_8((u8 *) CFG_BCSR_BASE + 0x07, 0x00);
 
 	/* enable Ethernet */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0x00;
+	out_8((u8 *) CFG_BCSR_BASE + 0x08, 0x00);
 
 	/* enable USB device */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x20;
+	out_8((u8 *) CFG_BCSR_BASE + 0x09, 0x20);
 
 	/* select Ethernet pins */
 	mfsdr(SDR0_PFC1, sdr0_pfc1);
@@ -583,3 +585,24 @@ int post_hotkeys_pressed(void)
 	return 0;	/* No hotkeys supported */
 }
 #endif /* CONFIG_POST */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 val[4];
+	int rc;
+
+	ft_cpu_setup(blob, bd);
+
+	/* Fixup NOR mapping */
+	val[0] = 0;				/* chip select number */
+	val[1] = 0;				/* always 0 */
+	val[2] = gd->bd->bi_flashstart;
+	val[3] = gd->bd->bi_flashsize;
+	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+				  val, sizeof(val), 1);
+	if (rc)
+		printf("Unable to update property NOR mapping, err=%s\n",
+		       fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */

board/amcc/taihu/u-boot.lds

@@ -62,19 +62,6 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)

board/amcc/taishan/showinfo.c

@@ -33,25 +33,25 @@ void show_reset_reg(void)
 
 	/* read clock regsiter */
 	printf("===== Display reset and initialize register Start =========\n");
-	mfclk(clk_pllc,reg);
+	mfcpr(clk_pllc,reg);
 	printf("cpr_pllc   = %#010x\n",reg);
 
-	mfclk(clk_plld,reg);
+	mfcpr(clk_plld,reg);
 	printf("cpr_plld   = %#010x\n",reg);
 
-	mfclk(clk_primad,reg);
+	mfcpr(clk_primad,reg);
 	printf("cpr_primad = %#010x\n",reg);
 
-	mfclk(clk_primbd,reg);
+	mfcpr(clk_primbd,reg);
 	printf("cpr_primbd = %#010x\n",reg);
 
-	mfclk(clk_opbd,reg);
+	mfcpr(clk_opbd,reg);
 	printf("cpr_opbd   = %#010x\n",reg);
 
-	mfclk(clk_perd,reg);
+	mfcpr(clk_perd,reg);
 	printf("cpr_perd   = %#010x\n",reg);
 
-	mfclk(clk_mald,reg);
+	mfcpr(clk_mald,reg);
 	printf("cpr_mald   = %#010x\n",reg);
 
 	/* read sdr register */

board/amcc/taishan/u-boot.lds

@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o	(.text)
     board/amcc/taishan/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)

board/amcc/walnut/u-boot.lds

@@ -62,19 +62,6 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)

board/amcc/yosemite/u-boot.lds

@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o	(.text)
     board/amcc/yosemite/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)

board/amcc/yucca/u-boot.lds

@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o		(.text)
     board/amcc/yucca/init.o	(.text)
-    cpu/ppc4xx/kgdb.o		(.text)
-    cpu/ppc4xx/traps.o		(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o		(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o		(.text)
-    common/dlmalloc.o		(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o		(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)

board/amcc/yucca/u-boot.lds.debug

@@ -1,146 +0,0 @@
-/*
- * (C) Copyright 2002-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)	}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)	}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)	}
-  .rela.got      : { *(.rela.got)	}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)	}
-  .rela.bss      : { *(.rela.bss)	}
-  .rel.plt       : { *(.rel.plt)	}
-  .rela.plt      : { *(.rela.plt)	}
-  .init          : { *(.init)		}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/ppc4xx/start.o		(.text)
-    board/amcc/yucca/init.o	(.text)
-    cpu/ppc4xx/kgdb.o		(.text)
-    cpu/ppc4xx/traps.o		(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o		(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o		(.text)
-    common/dlmalloc.o		(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o		(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    common/environment.o(.text) */
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}

board/amcc/yucca/yucca.c

@@ -27,29 +27,17 @@
 
 #include <common.h>
 #include <ppc4xx.h>
-#include <asm/processor.h>
 #include <i2c.h>
-#include <asm-ppc/io.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/4xx_pcie.h>
 
 #include "yucca.h"
-#include "../cpu/ppc4xx/440spe_pcie.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#undef PCIE_ENDPOINT
-/* #define PCIE_ENDPOINT 1 */
-
 void fpga_init (void);
 
-void get_sys_info(PPC440_SYS_INFO *board_cfg );
-int compare_to_true(char *str );
-char *remove_l_w_space(char *in_str );
-char *remove_t_w_space(char *in_str );
-int get_console_port(void);
-
-int ppc440spe_init_pcie_rootport(int port);
-void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
-
 #define DEBUG_ENV
 #ifdef DEBUG_ENV
 #define DEBUGF(fmt,args...) printf(fmt ,##args)
@@ -541,10 +529,10 @@ int board_early_init_f (void)
 	mtdcr (uic0sr, 0x00000000);	/* clear all interrupts */
 	mtdcr (uic0sr, 0xffffffff);	/* clear all interrupts */
 
-	/* SDR0_MFR should be part of Ethernet init */
+	mfsdr(sdr_mfr, mfr);
-	mfsdr (sdr_mfr, mfr);
+	mfr |= SDR0_MFR_FIXD;		/* Workaround for PCI/DMA */
-	mfr &= ~SDR0_MFR_ECS_MASK;
+	mtsdr(sdr_mfr, mfr);
-	/*mtsdr(sdr_mfr, mfr);*/
+
 	fpga_init();
 
 	return 0;
@@ -850,6 +838,7 @@ void pcie_setup_hoses(int busno)
 {
 	struct pci_controller *hose;
 	int i, bus;
+	int ret = 0;
 	char *env;
 	unsigned int delay;
 
@@ -863,14 +852,16 @@ void pcie_setup_hoses(int busno)
 		if (!yucca_pcie_card_present(i))
 			continue;
 
-#ifdef PCIE_ENDPOINT
+		if (is_end_point(i)) {
- 		yucca_setup_pcie_fpga_endpoint(i);
+			yucca_setup_pcie_fpga_endpoint(i);
- 		if (ppc440spe_init_pcie_endport(i)) {
+			ret = ppc4xx_init_pcie_endport(i);
-#else
+		} else {
-		yucca_setup_pcie_fpga_rootpoint(i);
+			yucca_setup_pcie_fpga_rootpoint(i);
-		if (ppc440spe_init_pcie_rootport(i)) {
+			ret = ppc4xx_init_pcie_rootport(i);
-#endif
+		}
-			printf("PCIE%d: initialization failed\n", i);
+		if (ret) {
+			printf("PCIE%d: initialization as %s failed\n", i,
+			       is_end_point(i) ? "endpoint" : "root-complex");
 			continue;
 		}
 
@@ -884,35 +875,33 @@ void pcie_setup_hoses(int busno)
 			CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
 			CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
 			CFG_PCIE_MEMSIZE,
-			PCI_REGION_MEM
+			PCI_REGION_MEM);
-			);
 		hose->region_count = 1;
 		pci_register_hose(hose);
 
-#ifdef PCIE_ENDPOINT
+		if (is_end_point(i)) {
-		ppc440spe_setup_pcie_endpoint(hose, i);
+			ppc4xx_setup_pcie_endpoint(hose, i);
-		/*
+			/*
-		 * Reson for no scanning is endpoint can not generate
+			 * Reson for no scanning is endpoint can not generate
-		 * upstream configuration accesses.
+			 * upstream configuration accesses.
-		 */
+		 	 */
-#else
+		} else {
-		ppc440spe_setup_pcie_rootpoint(hose, i);
+			ppc4xx_setup_pcie_rootpoint(hose, i);
+			env = getenv("pciscandelay");
+			if (env != NULL) {
+				delay = simple_strtoul(env, NULL, 10);
+				if (delay > 5)
+				    	printf("Warning, expect noticable delay before "
+					       "PCIe scan due to 'pciscandelay' value!\n");
+				mdelay(delay * 1000);
+			}
 
-		env = getenv ("pciscandelay");
+			/*
-		if (env != NULL) {
+			 * Config access can only go down stream
-			delay = simple_strtoul (env, NULL, 10);
+		 	 */
-			if (delay > 5)
+			hose->last_busno = pci_hose_scan(hose);
-				printf ("Warning, expect noticable delay before PCIe"
+			bus = hose->last_busno + 1;
-					"scan due to 'pciscandelay' value!\n");
-			mdelay (delay * 1000);
 		}
-
-		/*
-		 * Config access can only go down stream
-		 */
-		hose->last_busno = pci_hose_scan(hose);
-		bus = hose->last_busno + 1;
-#endif
 	}
 }
 #endif	/* defined(CONFIG_PCI) */

board/amirix/ap1000/u-boot.lds

@@ -61,7 +61,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)

board/cm5200/cm5200.c

@@ -263,7 +263,6 @@ static void ft_blob_update(void *blob, bd_t *bd)
 {
 	int len, ret, nodeoffset = 0;
 	char module_name[MODULE_NAME_MAXLEN] = {0};
-	ulong memory_data[2] = {0};
 
 	compose_module_name(hw_id, module_name);
 	len = strlen(module_name) + 1;
@@ -273,22 +272,12 @@ static void ft_blob_update(void *blob, bd_t *bd)
 	printf("ft_blob_update(): cannot set /model property err:%s\n",
 		fdt_strerror(ret));
 
-	memory_data[0] = cpu_to_be32(bd->bi_memstart);
+	ret = fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-	memory_data[1] = cpu_to_be32(bd->bi_memsize);
 
-	nodeoffset = fdt_find_node_by_path (blob, "/memory");
+	if (ret < 0) {
-	if (nodeoffset >= 0) {
-		ret = fdt_setprop(blob, nodeoffset, "reg", memory_data,
-					sizeof(memory_data));
-	if (ret < 0)
 		printf("ft_blob_update): cannot set /memory/reg "
 			"property err:%s\n", fdt_strerror(ret));
 	}
-	else {
-		/* memory node is required in dts */
-		printf("ft_blob_update(): cannot find /memory node "
-		"err:%s\n", fdt_strerror(nodeoffset));
-	}
 }
 #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
 

board/cogent/u-boot.lds

@@ -55,6 +55,7 @@ SECTIONS
   {
     *(.text)
     common/environment.o(.text)
+    *(.fixup)
     *(.got1)
   }
   _etext = .;

board/cray/L1/u-boot.lds

@@ -66,7 +66,7 @@ SECTIONS
     board/cray/L1/init.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)

board/csb272/u-boot.lds

@@ -66,7 +66,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)

board/csb472/u-boot.lds

@@ -66,7 +66,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)

board/dave/PPChameleonEVB/u-boot.lds

@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)

board/dbau1x00/dbau1x00.c

@@ -25,6 +25,7 @@
 #include <command.h>
 #include <asm/au1x00.h>
 #include <asm/mipsregs.h>
+#include <asm/io.h>
 
 long int initdram(int board_type)
 {
@@ -77,6 +78,9 @@ int checkboard (void)
 	default:
 		printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id);
 	}
+
+	set_io_port_base(0);
+
 #ifdef CONFIG_IDE_PCMCIA
 	/* Enable 3.3 V on slot 0 ( VCC )
 	   No 5V */

board/dbau1x00/u-boot.lds

@@ -54,10 +54,11 @@ SECTIONS
 
 	.sdata  : { *(.sdata) }
 
-	. = .;
+	.u_boot_cmd : {
-	__u_boot_cmd_start = .;
+	  __u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
+	  *(.u_boot_cmd)
-	__u_boot_cmd_end = .;
+	  __u_boot_cmd_end = .;
+	}
 
 	uboot_end_data = .;
 	num_got_entries = (__got_end - __got_start) >> 2;

board/eric/u-boot.lds

@@ -66,7 +66,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)

board/esd/apc405/u-boot.lds

@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)

board/esd/ar405/u-boot.lds

@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o		(.text)
     cpu/ppc4xx/traps.o		(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o		(.text)
+    cpu/ppc4xx/4xx_uart.o		(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o		(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)

board/esd/ash405/u-boot.lds

@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)

board/esd/canbt/u-boot.lds

@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o		(.text)
     cpu/ppc4xx/traps.o		(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o		(.text)
+    cpu/ppc4xx/4xx_uart.o		(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o		(.text)
     common/dlmalloc.o		(.text)

board/esd/cms700/u-boot.lds

@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)

board/esd/common/lcd.c

@@ -24,6 +24,7 @@
  * MA 02111-1307 USA
  */
 
+#include "asm/io.h"
 #include "lcd.h"
 
 
@@ -45,11 +46,10 @@ void lcd_setup(int lcd, int config)
 		 */
 		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD0_RST); /* set reset to low */
 		udelay(10); /* wait 10us */
-		if (config == 1) {
+		if (config == 1)
 			out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD_ENDIAN); /* big-endian */
-		} else {
+		else
 			out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD_ENDIAN); /* little-endian */
-		}
 		udelay(10); /* wait 10us */
 		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD0_RST); /* set reset to high */
 	} else {
@@ -58,11 +58,10 @@ void lcd_setup(int lcd, int config)
 		 */
 		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD1_RST); /* set reset to low */
 		udelay(10); /* wait 10us */
-		if (config == 1) {
+		if (config == 1)
 			out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD_ENDIAN); /* big-endian */
-		} else {
+		else
 			out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD_ENDIAN); /* little-endian */
-		}
 		udelay(10); /* wait 10us */
 		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD1_RST); /* set reset to high */
 	}
@@ -104,12 +103,10 @@ void lcd_bmp(uchar *logo_bmp)
 			printf("Error: malloc in gunzip failed!\n");
 			return;
 		}
-		if (gunzip(dst, CFG_VIDEO_LOGO_MAX_SIZE, (uchar *)logo_bmp, &len) != 0) {
+		if (gunzip(dst, CFG_VIDEO_LOGO_MAX_SIZE, (uchar *)logo_bmp, &len) != 0)
 			return;
-		}
+		if (len == CFG_VIDEO_LOGO_MAX_SIZE)
-		if (len == CFG_VIDEO_LOGO_MAX_SIZE) {
 			printf("Image could be truncated (increase CFG_VIDEO_LOGO_MAX_SIZE)!\n");
-		}
 
 		/*
 		 * Check for bmp mark 'BM'
@@ -152,9 +149,8 @@ void lcd_bmp(uchar *logo_bmp)
 		break;
 	default:
 		printf("LCD: Unknown bpp (%d) im image!\n", bpp);
-		if ((dst != NULL) && (dst != (uchar *)logo_bmp)) {
+		if ((dst != NULL) && (dst != (uchar *)logo_bmp))
 			free(dst);
-		}
 		return;
 	}
 	printf(" (%d*%d, %dbpp)\n", width, height, bpp);
@@ -212,9 +208,8 @@ void lcd_bmp(uchar *logo_bmp)
 		}
 	}
 
-	if ((dst != NULL) && (dst != (uchar *)logo_bmp)) {
+	if ((dst != NULL) && (dst != (uchar *)logo_bmp))
 		free(dst);
-	}
 }
 
 
@@ -229,10 +224,10 @@ void lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
 	/*
 	 * Detect epson
 	 */
-	lcd_reg[0] = 0x00;
+	out_8(&lcd_reg[0], 0x00);
-	lcd_reg[1] = 0x00;
+	out_8(&lcd_reg[1], 0x00);
 
-	if (lcd_reg[0] == 0x1c) {
+	if (in_8(&lcd_reg[0]) == 0x1c) {
 		/*
 		 * Big epson detected
 		 */
@@ -241,7 +236,7 @@ void lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
 		palette_value = 0x1e4;
 		lcd_depth = 16;
 		puts("LCD:   S1D13806");
-	} else if (lcd_reg[1] == 0x1c) {
+	} else if (in_8(&lcd_reg[1]) == 0x1c) {
 		/*
 		 * Big epson detected (with register swap bug)
 		 */
@@ -250,7 +245,7 @@ void lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
 		palette_value = 0x1e5;
 		lcd_depth = 16;
 		puts("LCD:   S1D13806S");
-	} else if (lcd_reg[0] == 0x18) {
+	} else if (in_8(&lcd_reg[0]) == 0x18) {
 		/*
 		 * Small epson detected (704)
 		 */
@@ -259,7 +254,7 @@ void lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
 		palette_value = 0x17;
 		lcd_depth = 8;
 		puts("LCD:   S1D13704");
-	} else if (lcd_reg[0x10000] == 0x24) {
+	      } else if (in_8(&lcd_reg[0x10000]) == 0x24) {
 		/*
 		 * Small epson detected (705)
 		 */
@@ -277,7 +272,7 @@ void lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
 	/*
 	 * Setup lcd controller regs
 	 */
-	for (i = 0; i<reg_count; i++) {
+	for (i = 0; i < reg_count; i++) {
 		s1dReg = regs[i].Index;
 		if (reg_byte_swap) {
 			if ((s1dReg & 0x0001) == 0)

board/esd/cpci2dp/u-boot.lds

@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)

board/esd/cpci405/u-boot.lds

@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)

board/esd/cpci440/cpci440.c

@@ -1,152 +0,0 @@
-/*
- * (C) Copyright 2002
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <asm/processor.h>
-
-
-extern void lxt971_no_sleep(void);
-
-
-long int fixed_sdram( void );
-
-int board_early_init_f (void)
-{
-	uint reg;
-
-	/*--------------------------------------------------------------------
-	 * Setup the external bus controller/chip selects
-	 *-------------------------------------------------------------------*/
-	mtdcr( ebccfga, xbcfg );
-	reg = mfdcr( ebccfgd );
-	mtdcr( ebccfgd, reg | 0x04000000 );	/* Set ATC */
-
-	mtebc( pb0ap, 0x92015480 );	/* FLASH/SRAM */
-	mtebc( pb0cr, 0xFF87A000 ); /* BAS=0xff8 8MB R/W 16-bit */
-	/* test-only: other regs still missing... */
-
-	/*--------------------------------------------------------------------
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 *-------------------------------------------------------------------*/
-	mtdcr( uic0sr, 0xffffffff );    /* clear all */
-	mtdcr( uic0er, 0x00000000 );    /* disable all */
-	mtdcr( uic0cr, 0x00000009 );    /* SMI & UIC1 crit are critical */
-	mtdcr( uic0pr, 0xfffffe13 );    /* per ref-board manual */
-	mtdcr( uic0tr, 0x01c00008 );    /* per ref-board manual */
-	mtdcr( uic0vr, 0x00000001 );    /* int31 highest, base=0x000 */
-	mtdcr( uic0sr, 0xffffffff );    /* clear all */
-
-	mtdcr( uic1sr, 0xffffffff );    /* clear all */
-	mtdcr( uic1er, 0x00000000 );    /* disable all */
-	mtdcr( uic1cr, 0x00000000 );    /* all non-critical */
-	mtdcr( uic1pr, 0xffffe0ff );    /* per ref-board manual */
-	mtdcr( uic1tr, 0x00ffc000 );    /* per ref-board manual */
-	mtdcr( uic1vr, 0x00000001 );    /* int31 highest, base=0x000 */
-	mtdcr( uic1sr, 0xffffffff );    /* clear all */
-
-	return 0;
-}
-
-
-int checkboard (void)
-{
-	sys_info_t sysinfo;
-	get_sys_info(&sysinfo);
-
-	printf("Board: esd CPCI-440\n");
-	printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz/1000000);
-	printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor/1000000);
-	printf("\tPLB: %lu MHz\n", sysinfo.freqPLB/1000000);
-	printf("\tOPB: %lu MHz\n", sysinfo.freqOPB/1000000);
-	printf("\tEPB: %lu MHz\n", sysinfo.freqEPB/1000000);
-
-	/*
-	 * Disable sleep mode in LXT971
-	 */
-	lxt971_no_sleep();
-
-	return (0);
-}
-
-
-long int initdram (int board_type)
-{
-	long    dram_size = 0;
-
-	dram_size = fixed_sdram();
-	return dram_size;
-}
-
-
-/*************************************************************************
- *  fixed sdram init -- doesn't use serial presence detect.
- *
- *  Assumes:    64 MB, non-ECC, non-registered
- *              PLB @ 133 MHz
- *
- ************************************************************************/
-long int fixed_sdram( void )
-{
-	uint    reg;
-
-#if 1 /* test-only */
-	/*--------------------------------------------------------------------
-	 * Setup some default
-	 *------------------------------------------------------------------*/
-	mtsdram( mem_uabba, 0x00000000 );   /* ubba=0 (default)             */
-	mtsdram( mem_slio,  0x00000000 );   /* rdre=0 wrre=0 rarw=0         */
-	mtsdram( mem_devopt,0x00000000 );   /* dll=0 ds=0 (normal)          */
-	mtsdram( mem_wddctr,0x40000000 );   /* wrcp=0 dcd=0                 */
-	mtsdram( mem_clktr, 0x40000000 );   /* clkp=1 (90 deg wr) dcdt=0    */
-
-	/*--------------------------------------------------------------------
-	 * Setup for board-specific specific mem
-	 *------------------------------------------------------------------*/
-	/*
-	 * Following for CAS Latency = 2.5 @ 133 MHz PLB
-	 */
-	mtsdram( mem_b0cr, 0x00082001 );/* SDBA=0x000, 64MB, Mode 2, enabled*/
-	mtsdram( mem_tr0,  0x410a4012 );/* WR=2  WD=1 CL=2.5 PA=3 CP=4 LD=2 */
-	/* RA=10 RD=3                       */
-	mtsdram( mem_tr1,  0x8080082f );/* SS=T2 SL=STAGE 3 CD=1 CT=0x02f   */
-	mtsdram( mem_rtr,  0x08200000 );/* Rate 15.625 ns @ 133 MHz PLB     */
-	mtsdram( mem_cfg1, 0x00000000 );/* Self-refresh exit, disable PM    */
-	udelay( 400 );                  /* Delay 200 usecs (min)            */
-
-	/*--------------------------------------------------------------------
-	 * Enable the controller, then wait for DCEN to complete
-	 *------------------------------------------------------------------*/
-	mtsdram( mem_cfg0, 0x86000000 );/* DCEN=1, PMUD=1, 64-bit           */
-	for(;;)
-	{
-		mfsdram( mem_mcsts, reg );
-		if( reg & 0x80000000 )
-			break;
-	}
-
-	return( 64 * 1024 * 1024 );      /* 64 MB                           */
-#else
-	return( 32 * 1024 * 1024 );      /* 64 MB                           */
-#endif
-}

board/esd/cpci440/init.S

@@ -1,94 +0,0 @@
-/*
-*  Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
-*
-* See file CREDITS for list of people who contributed to this
-* project.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation; either version 2 of
-* the License, or (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-* MA 02111-1307 USA
-*/
-
-#include <ppc_asm.tmpl>
-#include <config.h>
-
-/* General */
-#define TLB_VALID   0x00000200
-
-/* Supported page sizes */
-
-#define SZ_1K	    0x00000000
-#define SZ_4K	    0x00000010
-#define SZ_16K	    0x00000020
-#define SZ_64K	    0x00000030
-#define SZ_256K	    0x00000040
-#define SZ_1M	    0x00000050
-#define SZ_16M	    0x00000070
-#define SZ_256M	    0x00000090
-
-/* Storage attributes */
-#define SA_W	    0x00000800	    /* Write-through */
-#define SA_I	    0x00000400	    /* Caching inhibited */
-#define SA_M	    0x00000200	    /* Memory coherence */
-#define SA_G	    0x00000100	    /* Guarded */
-#define SA_E	    0x00000080	    /* Endian */
-
-/* Access control */
-#define AC_X	    0x00000024	    /* Execute */
-#define AC_W	    0x00000012	    /* Write */
-#define AC_R	    0x00000009	    /* Read */
-
-/* Some handy macros */
-
-#define EPN(e)		((e) & 0xfffffc00)
-#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a)		( (a)&0x00000fbf )
-
-#define tlbtab_start\
-	mflr    r1  ;\
-	bl 0f	    ;
-
-#define tlbtab_end\
-	.long 0, 0, 0	;   \
-0:	mflr    r0	;   \
-	mtlr    r1	;   \
-	blr		;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
-	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-
-    .section .bootpg,"ax"
-    .globl tlbtab
-
-tlbtab:
-    tlbtab_start
-    tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
-    tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
-    tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
-    tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X )
-    tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X )
-    tlbtab_end

board/esd/cpci440/strataflash.c

@@ -1,755 +0,0 @@
-/*
- * (C) Copyright 2002
- * Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-
-#undef  DEBUG_FLASH
-/*
- * This file implements a Common Flash Interface (CFI) driver for U-Boot.
- * The width of the port and the width of the chips are determined at initialization.
- * These widths are used to calculate the address for access CFI data structures.
- * It has been tested on an Intel Strataflash implementation.
- *
- * References
- * JEDEC Standard JESD68 - Common Flash Interface (CFI)
- * JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes
- * Intel Application Note 646 Common Flash Interface (CFI) and Command Sets
- * Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet
- *
- * TODO
- * Use Primary Extended Query table (PRI) and Alternate Algorithm Query Table (ALT) to determine if protection is available
- * Add support for other command sets Use the PRI and ALT to determine command set
- * Verify erase and program timeouts.
- */
-
-#define FLASH_CMD_CFI			0x98
-#define FLASH_CMD_READ_ID		0x90
-#define FLASH_CMD_RESET			0xff
-#define FLASH_CMD_BLOCK_ERASE		0x20
-#define FLASH_CMD_ERASE_CONFIRM		0xD0
-#define FLASH_CMD_WRITE			0x40
-#define FLASH_CMD_PROTECT		0x60
-#define FLASH_CMD_PROTECT_SET		0x01
-#define FLASH_CMD_PROTECT_CLEAR		0xD0
-#define FLASH_CMD_CLEAR_STATUS		0x50
-#define FLASH_CMD_WRITE_TO_BUFFER       0xE8
-#define FLASH_CMD_WRITE_BUFFER_CONFIRM  0xD0
-
-#define FLASH_STATUS_DONE		0x80
-#define FLASH_STATUS_ESS		0x40
-#define FLASH_STATUS_ECLBS		0x20
-#define FLASH_STATUS_PSLBS		0x10
-#define FLASH_STATUS_VPENS		0x08
-#define FLASH_STATUS_PSS		0x04
-#define FLASH_STATUS_DPS		0x02
-#define FLASH_STATUS_R			0x01
-#define FLASH_STATUS_PROTECT		0x01
-
-#define FLASH_OFFSET_CFI		0x55
-#define FLASH_OFFSET_CFI_RESP		0x10
-#define FLASH_OFFSET_WTOUT		0x1F
-#define FLASH_OFFSET_WBTOUT             0x20
-#define FLASH_OFFSET_ETOUT		0x21
-#define FLASH_OFFSET_CETOUT             0x22
-#define FLASH_OFFSET_WMAX_TOUT		0x23
-#define FLASH_OFFSET_WBMAX_TOUT         0x24
-#define FLASH_OFFSET_EMAX_TOUT		0x25
-#define FLASH_OFFSET_CEMAX_TOUT         0x26
-#define FLASH_OFFSET_SIZE		0x27
-#define FLASH_OFFSET_INTERFACE          0x28
-#define FLASH_OFFSET_BUFFER_SIZE        0x2A
-#define FLASH_OFFSET_NUM_ERASE_REGIONS	0x2C
-#define FLASH_OFFSET_ERASE_REGIONS	0x2D
-#define FLASH_OFFSET_PROTECT		0x02
-#define FLASH_OFFSET_USER_PROTECTION    0x85
-#define FLASH_OFFSET_INTEL_PROTECTION   0x81
-
-
-#define FLASH_MAN_CFI			0x01000000
-
-
-typedef union {
-	unsigned char c;
-	unsigned short w;
-	unsigned long l;
-} cfiword_t;
-
-typedef union {
-	unsigned char * cp;
-	unsigned short *wp;
-	unsigned long *lp;
-} cfiptr_t;
-
-#define NUM_ERASE_REGIONS 4
-
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-
-
-static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c);
-static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf);
-static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd);
-static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd);
-static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd);
-static int flash_detect_cfi(flash_info_t * info);
-static ulong flash_get_size (ulong base, int banknum);
-static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword);
-static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt);
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
-static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len);
-#endif
-/*-----------------------------------------------------------------------
- * create an address based on the offset and the port width
- */
-inline uchar * flash_make_addr(flash_info_t * info, int sect, int offset)
-{
-	return ((uchar *)(info->start[sect] + (offset * info->portwidth)));
-}
-/*-----------------------------------------------------------------------
- * read a character at a port width address
- */
-inline uchar flash_read_uchar(flash_info_t * info, uchar offset)
-{
-	uchar *cp;
-	cp = flash_make_addr(info, 0, offset);
-	return (cp[info->portwidth - 1]);
-}
-
-/*-----------------------------------------------------------------------
- * read a short word by swapping for ppc format.
- */
-ushort flash_read_ushort(flash_info_t * info, int sect,  uchar offset)
-{
-    uchar * addr;
-
-    addr = flash_make_addr(info, sect, offset);
-    return ((addr[(2*info->portwidth) - 1] << 8) | addr[info->portwidth - 1]);
-
-}
-
-/*-----------------------------------------------------------------------
- * read a long word by picking the least significant byte of each maiximum
- * port size word. Swap for ppc format.
- */
-ulong flash_read_long(flash_info_t * info, int sect,  uchar offset)
-{
-    uchar * addr;
-
-    addr = flash_make_addr(info, sect, offset);
-    return ( (addr[(2*info->portwidth) - 1] << 24 ) | (addr[(info->portwidth) -1] << 16) |
-	    (addr[(4*info->portwidth) - 1] << 8) | addr[(3*info->portwidth) - 1]);
-
-}
-
-/*-----------------------------------------------------------------------
- */
-unsigned long flash_init (void)
-{
-	unsigned long size;
-	int i;
-	unsigned long  address;
-
-
-	/* The flash is positioned back to back, with the demultiplexing of the chip
-	 * based on the A24 address line.
-	 *
-	 */
-
-	address = CFG_FLASH_BASE;
-	size = 0;
-
-	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-		size += flash_info[i].size = flash_get_size(address, i);
-		address += CFG_FLASH_INCREMENT;
-		if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-			printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",i,
-				flash_info[0].size, flash_info[i].size<<20);
-		}
-	}
-
-#if 0 /* test-only */
-	/* Monitor protection ON by default */
-#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
-	for(i=0; flash_info[0].start[i] < CFG_MONITOR_BASE+monitor_flash_len-1; i++)
-		(void)flash_real_protect(&flash_info[0], i, 1);
-#endif
-#endif
-
-	return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	int rcode = 0;
-	int prot;
-	int sect;
-
-	if( info->flash_id != FLASH_MAN_CFI) {
-		printf ("Can't erase unknown flash type - aborted\n");
-		return 1;
-	}
-	if ((s_first < 0) || (s_first > s_last)) {
-		printf ("- no sectors to erase\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) { /* not protected */
-			flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS);
-			flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE);
-			flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM);
-
-			if(flash_full_status_check(info, sect, info->erase_blk_tout, "erase")) {
-				rcode = 1;
-			} else
-				printf(".");
-		}
-	}
-	printf (" done\n");
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id != FLASH_MAN_CFI) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	printf("CFI conformant FLASH (%d x %d)",
-	       (info->portwidth	 << 3 ), (info->chipwidth  << 3 ));
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-	printf(" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n",
-	       info->erase_blk_tout, info->write_tout, info->buffer_write_tout, info->buffer_size);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n");
-		printf (" %08lX%5s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : " "
-			);
-	}
-	printf ("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong wp;
-	ulong cp;
-	int aln;
-	cfiword_t cword;
-	int i, rc;
-
-	/* get lower aligned address */
-	wp = (addr & ~(info->portwidth - 1));
-
-	/* handle unaligned start */
-	if((aln = addr - wp) != 0) {
-		cword.l = 0;
-		cp = wp;
-		for(i=0;i<aln; ++i, ++cp)
-			flash_add_byte(info, &cword, (*(uchar *)cp));
-
-		for(; (i< info->portwidth) && (cnt > 0) ; i++) {
-			flash_add_byte(info, &cword, *src++);
-			cnt--;
-			cp++;
-		}
-		for(; (cnt == 0) && (i < info->portwidth); ++i, ++cp)
-			flash_add_byte(info, &cword, (*(uchar *)cp));
-		if((rc = flash_write_cfiword(info, wp, cword)) != 0)
-			return rc;
-		wp = cp;
-	}
-
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
-	while(cnt >= info->portwidth) {
-		i = info->buffer_size > cnt? cnt: info->buffer_size;
-		if((rc = flash_write_cfibuffer(info, wp, src,i)) != ERR_OK)
-			return rc;
-		wp += i;
-		src += i;
-		cnt -=i;
-	}
-#else
-	/* handle the aligned part */
-	while(cnt >= info->portwidth) {
-		cword.l = 0;
-		for(i = 0; i < info->portwidth; i++) {
-			flash_add_byte(info, &cword, *src++);
-		}
-		if((rc = flash_write_cfiword(info, wp, cword)) != 0)
-			return rc;
-		wp += info->portwidth;
-		cnt -= info->portwidth;
-	}
-#endif /* CFG_FLASH_USE_BUFFER_WRITE */
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	cword.l = 0;
-	for (i=0, cp=wp; (i<info->portwidth) && (cnt>0); ++i, ++cp) {
-		flash_add_byte(info, &cword, *src++);
-		--cnt;
-	}
-	for (; i<info->portwidth; ++i, ++cp) {
-		flash_add_byte(info, & cword, (*(uchar *)cp));
-	}
-
-	return flash_write_cfiword(info, wp, cword);
-}
-
-/*-----------------------------------------------------------------------
- */
-int flash_real_protect(flash_info_t *info, long sector, int prot)
-{
-	int retcode = 0;
-
-	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
-	flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT);
-	if(prot)
-		flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_SET);
-	else
-		flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR);
-
-	if((retcode = flash_full_status_check(info, sector, info->erase_blk_tout,
-					 prot?"protect":"unprotect")) == 0) {
-
-		info->protect[sector] = prot;
-		/* Intel's unprotect unprotects all locking */
-		if(prot == 0) {
-			int i;
-			for(i = 0 ; i<info->sector_count; i++) {
-				if(info->protect[i])
-					flash_real_protect(info, i, 1);
-			}
-		}
-	}
-
-	return retcode;
-}
-/*-----------------------------------------------------------------------
- *  wait for XSR.7 to be set. Time out with an error if it does not.
- *  This routine does not set the flash to read-array mode.
- */
-static int flash_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt)
-{
-	ulong start;
-
-	/* Wait for command completion */
-	start = get_timer (0);
-	while(!flash_isset(info, sector, 0, FLASH_STATUS_DONE)) {
-		if (get_timer(start) > info->erase_blk_tout) {
-			printf("Flash %s timeout at address %lx\n", prompt, info->start[sector]);
-			flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
-			return ERR_TIMOUT;
-		}
-	}
-	return ERR_OK;
-}
-/*-----------------------------------------------------------------------
- * Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check.
- * This routine sets the flash to read-array mode.
- */
-static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt)
-{
-	int retcode;
-	retcode = flash_status_check(info, sector, tout, prompt);
-	if((retcode == ERR_OK) && !flash_isequal(info,sector, 0, FLASH_STATUS_DONE)) {
-		retcode = ERR_INVAL;
-		printf("Flash %s error at address %lx\n", prompt,info->start[sector]);
-		if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)){
-			printf("Command Sequence Error.\n");
-		} else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){
-			printf("Block Erase Error.\n");
-		        retcode = ERR_NOT_ERASED;
-		} else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) {
-			printf("Locking Error\n");
-		}
-		if(flash_isset(info, sector, 0, FLASH_STATUS_DPS)){
-			printf("Block locked.\n");
-			retcode = ERR_PROTECTED;
-		}
-		if(flash_isset(info, sector, 0, FLASH_STATUS_VPENS))
-			printf("Vpp Low Error.\n");
-	}
-	flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
-	return retcode;
-}
-/*-----------------------------------------------------------------------
- */
-static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c)
-{
-	switch(info->portwidth) {
-	case FLASH_CFI_8BIT:
-		cword->c = c;
-		break;
-	case FLASH_CFI_16BIT:
-		cword->w = (cword->w << 8) | c;
-		break;
-	case FLASH_CFI_32BIT:
-		cword->l = (cword->l << 8) | c;
-	}
-}
-
-
-/*-----------------------------------------------------------------------
- * make a proper sized command based on the port and chip widths
- */
-static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf)
-{
-	int i;
-	uchar *cp = (uchar *)cmdbuf;
-	for(i=0; i< info->portwidth; i++)
-		*cp++ = ((i+1) % info->chipwidth) ? '\0':cmd;
-}
-
-/*
- * Write a proper sized command to the correct address
- */
-static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd)
-{
-
-	volatile cfiptr_t addr;
-	cfiword_t cword;
-	addr.cp = flash_make_addr(info, sect, offset);
-	flash_make_cmd(info, cmd, &cword);
-	switch(info->portwidth) {
-	case FLASH_CFI_8BIT:
-		*addr.cp = cword.c;
-		break;
-	case FLASH_CFI_16BIT:
-		*addr.wp = cword.w;
-		break;
-	case FLASH_CFI_32BIT:
-		*addr.lp = cword.l;
-		break;
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd)
-{
-	cfiptr_t cptr;
-	cfiword_t cword;
-	int retval;
-	cptr.cp = flash_make_addr(info, sect, offset);
-	flash_make_cmd(info, cmd, &cword);
-	switch(info->portwidth) {
-	case FLASH_CFI_8BIT:
-		retval = (cptr.cp[0] == cword.c);
-		break;
-	case FLASH_CFI_16BIT:
-		retval = (cptr.wp[0] == cword.w);
-		break;
-	case FLASH_CFI_32BIT:
-		retval = (cptr.lp[0] == cword.l);
-		break;
-	default:
-		retval = 0;
-		break;
-	}
-	return retval;
-}
-/*-----------------------------------------------------------------------
- */
-static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd)
-{
-	cfiptr_t cptr;
-	cfiword_t cword;
-	int retval;
-	cptr.cp = flash_make_addr(info, sect, offset);
-	flash_make_cmd(info, cmd, &cword);
-	switch(info->portwidth) {
-	case FLASH_CFI_8BIT:
-		retval = ((cptr.cp[0] & cword.c) == cword.c);
-		break;
-	case FLASH_CFI_16BIT:
-		retval = ((cptr.wp[0] & cword.w) == cword.w);
-		break;
-	case FLASH_CFI_32BIT:
-		retval = ((cptr.lp[0] & cword.l) == cword.l);
-		break;
-	default:
-		retval = 0;
-		break;
-	}
-	return retval;
-}
-
-/*-----------------------------------------------------------------------
- * detect if flash is compatible with the Common Flash Interface (CFI)
- * http://www.jedec.org/download/search/jesd68.pdf
- *
- */
-static int flash_detect_cfi(flash_info_t * info)
-{
-
-	for(info->portwidth=FLASH_CFI_8BIT; info->portwidth <= FLASH_CFI_32BIT;
-	    info->portwidth <<= 1) {
-		for(info->chipwidth =FLASH_CFI_BY8;
-		    info->chipwidth <= info->portwidth;
-		    info->chipwidth <<= 1) {
-			flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
-			flash_write_cmd(info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI);
-			if(flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP,'Q') &&
-			   flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') &&
-			   flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y'))
-				return 1;
-		}
-	}
-	return 0;
-}
-/*
- * The following code cannot be run from FLASH!
- *
- */
-static ulong flash_get_size (ulong base, int banknum)
-{
-	flash_info_t * info = &flash_info[banknum];
-	int i, j;
-	int sect_cnt;
-	unsigned long sector;
-	unsigned long tmp;
-	int size_ratio;
-	uchar num_erase_regions;
-	int  erase_region_size;
-	int  erase_region_count;
-
-	info->start[0] = base;
-
-	if(flash_detect_cfi(info)){
-#ifdef DEBUG_FLASH
-		printf("portwidth=%d chipwidth=%d\n", info->portwidth, info->chipwidth); /* test-only */
-#endif
-		size_ratio = info->portwidth / info->chipwidth;
-		num_erase_regions = flash_read_uchar(info, FLASH_OFFSET_NUM_ERASE_REGIONS);
-#ifdef DEBUG_FLASH
-		printf("found %d erase regions\n", num_erase_regions);
-#endif
-		sect_cnt = 0;
-		sector = base;
-		for(i = 0 ; i < num_erase_regions; i++) {
-			if(i > NUM_ERASE_REGIONS) {
-				printf("%d erase regions found, only %d used\n",
-				       num_erase_regions, NUM_ERASE_REGIONS);
-				break;
-			}
-			tmp = flash_read_long(info, 0, FLASH_OFFSET_ERASE_REGIONS);
-			erase_region_size = (tmp & 0xffff)? ((tmp & 0xffff) * 256): 128;
-			tmp >>= 16;
-			erase_region_count = (tmp & 0xffff) +1;
-			for(j = 0; j< erase_region_count; j++) {
-				info->start[sect_cnt] = sector;
-				sector += (erase_region_size * size_ratio);
-				info->protect[sect_cnt] = flash_isset(info, sect_cnt, FLASH_OFFSET_PROTECT, FLASH_STATUS_PROTECT);
-				sect_cnt++;
-			}
-		}
-
-		info->sector_count = sect_cnt;
-		/* multiply the size by the number of chips */
-		info->size = (1 << flash_read_uchar(info, FLASH_OFFSET_SIZE)) * size_ratio;
-		info->buffer_size = (1 << flash_read_ushort(info, 0, FLASH_OFFSET_BUFFER_SIZE));
-		tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_ETOUT);
-		info->erase_blk_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_EMAX_TOUT)));
-		tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WBTOUT);
-		info->buffer_write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WBMAX_TOUT)));
-		tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WTOUT);
-		info->write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WMAX_TOUT)))/ 1000;
-		info->flash_id = FLASH_MAN_CFI;
-	}
-
-	flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
-	return(info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword)
-{
-
-	cfiptr_t ctladdr;
-	cfiptr_t cptr;
-	int flag;
-
-	ctladdr.cp = flash_make_addr(info, 0, 0);
-	cptr.cp = (uchar *)dest;
-
-
-	/* Check if Flash is (sufficiently) erased */
-	switch(info->portwidth) {
-	case FLASH_CFI_8BIT:
-		flag = ((cptr.cp[0] & cword.c) == cword.c);
-		break;
-	case FLASH_CFI_16BIT:
-		flag = ((cptr.wp[0] & cword.w) == cword.w);
-		break;
-	case FLASH_CFI_32BIT:
-		flag = ((cptr.lp[0] & cword.l)	== cword.l);
-		break;
-	default:
-		return 2;
-	}
-	if(!flag)
-		return 2;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	flash_write_cmd(info, 0, 0, FLASH_CMD_CLEAR_STATUS);
-	flash_write_cmd(info, 0, 0, FLASH_CMD_WRITE);
-
-	switch(info->portwidth) {
-	case FLASH_CFI_8BIT:
-		cptr.cp[0] = cword.c;
-		break;
-	case FLASH_CFI_16BIT:
-		cptr.wp[0] = cword.w;
-		break;
-	case FLASH_CFI_32BIT:
-		cptr.lp[0] = cword.l;
-		break;
-	}
-
-	/* re-enable interrupts if necessary */
-	if(flag)
-		enable_interrupts();
-
-	return flash_full_status_check(info, 0, info->write_tout, "write");
-}
-
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
-
-/* loop through the sectors from the highest address
- * when the passed address is greater or equal to the sector address
- * we have a match
- */
-static int find_sector(flash_info_t *info, ulong addr)
-{
-	int sector;
-	for(sector = info->sector_count - 1; sector >= 0; sector--) {
-		if(addr >= info->start[sector])
-			break;
-	}
-	return sector;
-}
-
-static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len)
-{
-
-	int sector;
-	int cnt;
-	int retcode;
-	volatile cfiptr_t src;
-	volatile cfiptr_t dst;
-
-	src.cp = cp;
-	dst.cp = (uchar *)dest;
-	sector = find_sector(info, dest);
-	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
-	flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
-	if((retcode = flash_status_check(info, sector, info->buffer_write_tout,
-					 "write to buffer")) == ERR_OK) {
-		switch(info->portwidth) {
-		case FLASH_CFI_8BIT:
-			cnt = len;
-			break;
-		case FLASH_CFI_16BIT:
-			cnt = len >> 1;
-			break;
-		case FLASH_CFI_32BIT:
-			cnt = len >> 2;
-			break;
-		default:
-			return ERR_INVAL;
-			break;
-		}
-		flash_write_cmd(info, sector, 0, (uchar)cnt-1);
-		while(cnt-- > 0) {
-			switch(info->portwidth) {
-			case FLASH_CFI_8BIT:
-				*dst.cp++ = *src.cp++;
-				break;
-			case FLASH_CFI_16BIT:
-				*dst.wp++ = *src.wp++;
-				break;
-			case FLASH_CFI_32BIT:
-				*dst.lp++ = *src.lp++;
-				break;
-			default:
-				return ERR_INVAL;
-				break;
-			}
-		}
-		flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_BUFFER_CONFIRM);
-		retcode = flash_full_status_check(info, sector, info->buffer_write_tout,
-					     "buffer write");
-	}
-	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
-	return retcode;
-}
-#endif /* CFG_USE_FLASH_BUFFER_WRITE */

board/esd/cpciiser4/u-boot.lds

@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)

board/esd/dasa_sim/u-boot.lds

@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o		(.text)
     cpu/ppc4xx/traps.o		(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o		(.text)
+    cpu/ppc4xx/iop480_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o		(.text)
     common/dlmalloc.o		(.text)

board/esd/dp405/u-boot.lds

@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)

board/esd/du405/u-boot.lds

@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)

board/esd/hh405/u-boot.lds

@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)

board/esd/hub405/u-boot.lds

@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)

board/esd/ocrtc/cmd_ocrtc.c

@@ -25,7 +25,7 @@
 #include <command.h>
 #include <pci.h>
 #include <pci_ids.h>
-#include <405gp_pci.h>
+#include <asm/4xx_pci.h>
 
 
 #if defined(CONFIG_CMD_BSP)

board/esd/ocrtc/u-boot.lds

@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)

board/esd/pci405/cmd_pci405.c

@@ -27,7 +27,7 @@
 #include <net.h>
 #include <asm/io.h>
 #include <pci.h>
-#include <405gp_pci.h>
+#include <asm/4xx_pci.h>
 #include <asm/processor.h>
 
 #include "pci405.h"

board/esd/pci405/pci405.c

@@ -26,7 +26,7 @@
 #include <command.h>
 #include <malloc.h>
 #include <pci.h>
-#include <405gp_pci.h>
+#include <asm/4xx_pci.h>
 
 #include "pci405.h"
 

board/esd/pci405/u-boot.lds

@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)

board/esd/plu405/plu405.c

@@ -109,8 +109,8 @@ int misc_init_f (void)
 
 int misc_init_r (void)
 {
-	volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
+	unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
-	volatile unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
+	unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
 	unsigned char *dst;
 	ulong len = sizeof(fpgadata);
 	int status;
@@ -184,16 +184,28 @@ int misc_init_r (void)
 	/*
 	 * Reset external DUARTs
 	 */
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_DUART_RST);
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
 	udelay(10); /* wait 10us */
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_DUART_RST);
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
 	udelay(1000); /* wait 1ms */
 
+	/*
+	 * Set NAND-FLASH GPIO signals to default
+	 */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_NAND_CE);
+
+	/*
+	 * Setup EEPROM write protection
+	 */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_EEPROM_WP);
+	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CFG_EEPROM_WP);
+
 	/*
 	 * Enable interrupts in exar duart mcr[3]
 	 */
-	*duart0_mcr = 0x08;
+	out_8(duart0_mcr, 0x08);
-	*duart1_mcr = 0x08;
+	out_8(duart1_mcr, 0x08);
 
 	return (0);
 }
@@ -259,3 +271,74 @@ void reset_phy(void)
 	lxt971_no_sleep();
 #endif
 }
+
+
+#if defined(CFG_EEPROM_WREN)
+/* Input: <dev_addr>  I2C address of EEPROM device to enable.
+ *         <state>     -1: deliver current state
+ *	               0: disable write
+ *		       1: enable write
+ *  Returns:           -1: wrong device address
+ *                      0: dis-/en- able done
+ *		     0/1: current state if <state> was -1.
+ */
+int eeprom_write_enable (unsigned dev_addr, int state)
+{
+	if (CFG_I2C_EEPROM_ADDR != dev_addr) {
+		return -1;
+	} else {
+		switch (state) {
+		case 1:
+			/* Enable write access, clear bit GPIO0. */
+			out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_EEPROM_WP);
+			state = 0;
+			break;
+		case 0:
+			/* Disable write access, set bit GPIO0. */
+			out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_EEPROM_WP);
+			state = 0;
+			break;
+		default:
+			/* Read current status back. */
+			state = (0 == (in_be32((void*)GPIO0_OR) & CFG_EEPROM_WP));
+			break;
+		}
+	}
+	return state;
+}
+
+int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int query = argc == 1;
+	int state = 0;
+
+	if (query) {
+		/* Query write access state. */
+		state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1);
+		if (state < 0) {
+			puts ("Query of write access state failed.\n");
+		} else {
+			printf ("Write access for device 0x%0x is %sabled.\n",
+				CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+			state = 0;
+		}
+	} else {
+		if ('0' == argv[1][0]) {
+			/* Disable write access. */
+			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0);
+		} else {
+			/* Enable write access. */
+			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1);
+		}
+		if (state < 0) {
+			puts ("Setup of write access state failed.\n");
+		}
+	}
+
+	return state;
+}
+
+U_BOOT_CMD(eepwren,	2,	0,	do_eep_wren,
+	   "eepwren - Enable / disable / query EEPROM write access\n",
+	   NULL);
+#endif /* #if defined(CFG_EEPROM_WREN) */

board/esd/plu405/u-boot.lds

@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)

board/esd/pmc405/u-boot.lds

@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)

board/esd/pmc440/Makefile

@@ -22,13 +22,12 @@
 #
 
 include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o strataflash.o ../common/misc.o
+COBJS	= $(BOARD).o cmd_pmc440.o sdram.o fpga.o \
+	../common/cmd_loadpci.o
+
 SOBJS	= init.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
@@ -36,7 +35,7 @@ OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
 $(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
 
 clean:
 	rm -f $(SOBJS) $(OBJS)

board/esd/pmc440/cmd_pmc440.c

@@ -0,0 +1,558 @@
+/*
+ * (C) Copyright 2007
+ * Matthias Fuchs, esd Gmbh, matthias.fuchs@esd-electronics.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/io.h>
+#include <asm/cache.h>
+#include <asm/processor.h>
+
+#include "pmc440.h"
+
+int is_monarch(void);
+int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
+int eeprom_write_enable(unsigned dev_addr, int state);
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_CMD_BSP)
+
+static int got_fifoirq;
+static int got_hcirq;
+
+int fpga_interrupt(u32 arg)
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)arg;
+	int rc = -1; /* not for us */
+	u32 status = FPGA_IN32(&fpga->status);
+
+	/* check for interrupt from fifo module */
+	if (status & STATUS_FIFO_ISF) {
+		/* disable this int source */
+		FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_FIFOIE_GATE);
+		rc = 0;
+		got_fifoirq = 1; /* trigger backend */
+	}
+
+	if (status & STATUS_HOST_ISF) {
+		FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_HCINT_GATE);
+		rc = 0;
+		got_hcirq = 1;
+	}
+
+	return rc;
+}
+
+
+int do_waithci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
+
+	got_hcirq = 0;
+
+	FPGA_CLRBITS(&fpga->ctrla, CTRL_HOST_IE);
+	FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_HCINT_GATE);
+
+	irq_install_handler(IRQ0_FPGA,
+			    (interrupt_handler_t *)fpga_interrupt,
+			    fpga);
+
+	FPGA_SETBITS(&fpga->ctrla, CTRL_HOST_IE);
+
+	while (!got_hcirq) {
+		/* Abort if ctrl-c was pressed */
+		if (ctrlc()) {
+			puts("\nAbort\n");
+			break;
+		}
+	}
+	if (got_hcirq)
+		printf("Got interrupt!\n");
+
+	FPGA_CLRBITS(&fpga->ctrla, CTRL_HOST_IE);
+	irq_free_handler(IRQ0_FPGA);
+	return 0;
+}
+U_BOOT_CMD(
+	waithci,	1,	1,	do_waithci,
+	"waithci - Wait for host control interrupt\n",
+	NULL
+	);
+
+
+void dump_fifo(pmc440_fpga_t *fpga, int f, int *n)
+{
+	u32 ctrl;
+
+	while (!((ctrl = FPGA_IN32(&fpga->fifo[f].ctrl)) & FIFO_EMPTY)) {
+		printf("%5d  %d    %3d  %08x",
+		       (*n)++, f, ctrl & (FIFO_LEVEL_MASK | FIFO_FULL),
+		       FPGA_IN32(&fpga->fifo[f].data));
+		if (ctrl & FIFO_OVERFLOW) {
+			printf(" OVERFLOW\n");
+			FPGA_CLRBITS(&fpga->fifo[f].ctrl, FIFO_OVERFLOW);
+		} else
+			printf("\n");
+	}
+}
+
+
+int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
+	int i;
+	int n = 0;
+	u32 ctrl, data, f;
+	char str[] = "\\|/-";
+	int abort = 0;
+	int count = 0;
+	int count2 = 0;
+
+	switch (argc) {
+	case 1:
+		/* print all fifos status information */
+		printf("fifo level status\n");
+		printf("______________________________\n");
+		for (i=0; i<FIFO_COUNT; i++) {
+			ctrl = FPGA_IN32(&fpga->fifo[i].ctrl);
+			printf(" %d    %3d  %s%s%s %s\n",
+			       i, ctrl & (FIFO_LEVEL_MASK | FIFO_FULL),
+			       ctrl & FIFO_FULL ? "FULL     " : "",
+			       ctrl & FIFO_EMPTY ? "EMPTY    " : "",
+			       ctrl & (FIFO_FULL|FIFO_EMPTY) ? "" : "NOT EMPTY",
+			       ctrl & FIFO_OVERFLOW ? "OVERFLOW" : "");
+		}
+		break;
+
+	case 2:
+		/* completely read out fifo 'n' */
+		if (!strcmp(argv[1],"read")) {
+			printf("  #   fifo level data\n");
+			printf("______________________________\n");
+
+			for (i=0; i<FIFO_COUNT; i++)
+				dump_fifo(fpga, i, &n);
+
+		} else if (!strcmp(argv[1],"wait")) {
+			got_fifoirq = 0;
+
+			irq_install_handler(IRQ0_FPGA,
+					    (interrupt_handler_t *)fpga_interrupt,
+					    fpga);
+
+			printf("  #   fifo level data\n");
+			printf("______________________________\n");
+
+			/* enable all fifo interrupts */
+			FPGA_OUT32(&fpga->hostctrl,
+				   HOSTCTRL_FIFOIE_GATE | HOSTCTRL_FIFOIE_FLAG);
+			for (i=0; i<FIFO_COUNT; i++) {
+				/* enable interrupts from all fifos */
+				FPGA_SETBITS(&fpga->fifo[i].ctrl, FIFO_IE);
+			}
+
+			while (1) {
+				/* wait loop */
+				while (!got_fifoirq) {
+					count++;
+					if (!(count % 100)) {
+						count2++;
+						putc(0x08); /* backspace */
+						putc(str[count2 % 4]);
+					}
+
+					/* Abort if ctrl-c was pressed */
+					if ((abort = ctrlc())) {
+						puts("\nAbort\n");
+						break;
+					}
+					udelay(1000);
+				}
+				if (abort)
+					break;
+
+				/* simple fifo backend */
+				if (got_fifoirq) {
+					for (i=0; i<FIFO_COUNT; i++)
+						dump_fifo(fpga, i, &n);
+
+					got_fifoirq = 0;
+					/* unmask global fifo irq */
+					FPGA_OUT32(&fpga->hostctrl,
+						   HOSTCTRL_FIFOIE_GATE | HOSTCTRL_FIFOIE_FLAG);
+				}
+			}
+
+			/* disable all fifo interrupts */
+			FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_FIFOIE_GATE);
+			for (i=0; i<FIFO_COUNT; i++)
+				FPGA_CLRBITS(&fpga->fifo[i].ctrl, FIFO_IE);
+
+			irq_free_handler(IRQ0_FPGA);
+
+		} else {
+			printf("Usage:\nfifo %s\n", cmdtp->help);
+			return 1;
+		}
+		break;
+
+	case 4:
+	case 5:
+		if (!strcmp(argv[1],"write")) {
+			/* get fifo number or fifo address */
+			f = simple_strtoul(argv[2], NULL, 16);
+
+			/* data paramter */
+			data = simple_strtoul(argv[3], NULL, 16);
+
+			/* get optional count parameter */
+			n = 1;
+			if (argc >= 5)
+				n = (int)simple_strtoul(argv[4], NULL, 10);
+
+			if (f < FIFO_COUNT) {
+				printf("writing %d x %08x to fifo %d\n",
+				       n, data, f);
+				for (i=0; i<n; i++)
+					FPGA_OUT32(&fpga->fifo[f].data, data);
+			} else {
+				printf("writing %d x %08x to fifo port at address %08x\n",
+				       n, data, f);
+				for (i=0; i<n; i++)
+					out32(f, data);
+			}
+		} else {
+			printf("Usage:\nfifo %s\n", cmdtp->help);
+			return 1;
+		}
+		break;
+
+	default:
+		printf("Usage:\nfifo %s\n", cmdtp->help);
+		return 1;
+	}
+	return 0;
+}
+U_BOOT_CMD(
+	fifo,	5,	1,	do_fifo,
+	"fifo    - Fifo module operations\n",
+	"wait\nfifo read\n"
+	"fifo write fifo(0..3) data [cnt=1]\n"
+	"fifo write address(>=4) data [cnt=1]\n"
+	"  - without arguments: print all fifo's status\n"
+	"  - with 'wait' argument: interrupt driven read from all fifos\n"
+	"  - with 'read' argument: read current contents from all fifos\n"
+	"  - with 'write' argument: write 'data' 'cnt' times to 'fifo' or 'address'\n"
+	);
+
+
+int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	ulong sdsdp[5];
+	ulong delay;
+	int count=16;
+
+	if (argc < 2) {
+		printf("Usage:\nsbe %s\n", cmdtp->help);
+		return -1;
+	}
+
+	if (argc > 1) {
+		if (!strcmp(argv[1], "400")) {
+			/* PLB=133MHz, PLB/PCI=4 */
+			printf("Bootstrapping for 400MHz\n");
+			sdsdp[0]=0x8678624e;
+			sdsdp[1]=0x0947a030;
+			sdsdp[2]=0x40082350;
+			sdsdp[3]=0x0d050000;
+		} else if (!strcmp(argv[1], "533")) {
+			/* PLB=133MHz, PLB/PCI=3 */
+			printf("Bootstrapping for 533MHz\n");
+			sdsdp[0]=0x87788252;
+			sdsdp[1]=0x095fa030;
+			sdsdp[2]=0x40082350;
+			sdsdp[3]=0x0d050000;
+		} else if (!strcmp(argv[1], "667")) {
+			/* PLB=133MHz, PLB/PCI=4 */
+			printf("Bootstrapping for 667MHz\n");
+			sdsdp[0]=0x8778a256;
+			sdsdp[1]=0x0947a030;
+			sdsdp[2]=0x40082350;
+			sdsdp[3]=0x0d050000;
+		} else if (!strcmp(argv[1], "test")) {
+			/* TODO: this will replace the 667 MHz config above.
+			 * But it needs some more testing on a real 667 MHz CPU.
+			 */
+			printf("Bootstrapping for test (667MHz PLB=133PLB PLB/PCI=3)\n");
+			sdsdp[0]=0x8778a256;
+			sdsdp[1]=0x095fa030;
+			sdsdp[2]=0x40082350;
+			sdsdp[3]=0x0d050000;
+		} else {
+			printf("Usage:\nsbe %s\n", cmdtp->help);
+			return -1;
+		}
+	}
+
+	if (argc > 2) {
+		sdsdp[4] = 0;
+		if (argv[2][0]=='1')
+			sdsdp[4]=0x19750100;
+		else if (argv[2][0]=='0')
+			sdsdp[4]=0x19750000;
+		if (sdsdp[4])
+			count += 4;
+	}
+
+	if (argc > 3) {
+		delay = simple_strtoul(argv[3], NULL, 10);
+		if (delay > 20)
+			delay = 20;
+		sdsdp[4] |= delay;
+	}
+
+	printf("Writing boot EEPROM ...\n");
+	if (bootstrap_eeprom_write(CFG_I2C_BOOT_EEPROM_ADDR,
+				   0, (uchar*)sdsdp, count) != 0)
+		printf("bootstrap_eeprom_write failed\n");
+	else
+		printf("done (dump via 'i2c md 52 0.1 14')\n");
+
+	return 0;
+}
+U_BOOT_CMD(
+	sbe, 4, 0, do_setup_bootstrap_eeprom,
+	"sbe     - setup bootstrap eeprom\n",
+	"<cpufreq:400|533|667> [<console-uart:0|1> [<bringup delay (0..20s)>]]"
+	);
+
+
+#if defined(CONFIG_PRAM)
+#include <environment.h>
+extern env_t *env_ptr;
+
+int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	u32 memsize;
+	u32 pram, env_base;
+	char *v;
+	u32 param;
+	ulong *lptr;
+
+	memsize = gd->bd->bi_memsize;
+
+	v = getenv("pram");
+	if (v)
+		pram = simple_strtoul(v, NULL, 10);
+	else {
+		printf("Error: pram undefined. Please define pram in KiB\n");
+		return 1;
+	}
+
+	param = memsize - (pram << 10);
+	printf("PARAM: @%08x\n", param);
+
+	memset((void*)param, 0, (pram << 10));
+	env_base = memsize - 4096 - ((CFG_ENV_SIZE + 4096) & ~(4096-1));
+	memcpy((void*)env_base, env_ptr, CFG_ENV_SIZE);
+
+	lptr = (ulong*)memsize;
+	*(--lptr) = CFG_ENV_SIZE;
+	*(--lptr) = memsize - env_base;
+	*(--lptr) = crc32(0, (void*)(memsize - 0x08), 0x08);
+	*(--lptr) = 0;
+
+	/* make sure data can be accessed through PCI */
+	flush_dcache_range(param, param + (pram << 10) - 1);
+	return 0;
+}
+U_BOOT_CMD(
+	painit,	1,	1,	do_painit,
+	"painit  - prepare PciAccess system\n",
+	NULL
+	);
+#endif /* CONFIG_PRAM */
+
+
+int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	if (argc > 1) {
+		if (argv[1][0] == '0') {
+			/* assert */
+			printf("self-reset# asserted\n");
+			out_be32((void*)GPIO0_TCR,
+				 in_be32((void*)GPIO0_TCR) | GPIO0_SELF_RST);
+		} else {
+			/* deassert */
+			printf("self-reset# deasserted\n");
+			out_be32((void*)GPIO0_TCR,
+				 in_be32((void*)GPIO0_TCR) & ~GPIO0_SELF_RST);
+		}
+	} else {
+		printf("self-reset# is %s\n",
+		       in_be32((void*)GPIO0_TCR) & GPIO0_SELF_RST ?
+		       "active" : "inactive");
+	}
+
+	return 0;
+}
+U_BOOT_CMD(
+	selfreset,	2,	1,	do_selfreset,
+	"selfreset- assert self-reset# signal\n",
+	NULL
+	);
+
+
+int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
+
+	/* requiers bootet FPGA and PLD_IOEN_N active */
+	if (in_be32((void*)GPIO1_OR) & GPIO1_IOEN_N) {
+		printf("Error: resetout requires a bootet FPGA\n");
+		return -1;
+	}
+
+	if (argc > 1) {
+		if (argv[1][0] == '0') {
+			/* assert */
+			printf("PMC-RESETOUT# asserted\n");
+			FPGA_OUT32(&fpga->hostctrl,
+				   HOSTCTRL_PMCRSTOUT_GATE);
+		} else {
+			/* deassert */
+			printf("PMC-RESETOUT# deasserted\n");
+			FPGA_OUT32(&fpga->hostctrl,
+				   HOSTCTRL_PMCRSTOUT_GATE | HOSTCTRL_PMCRSTOUT_FLAG);
+		}
+	} else {
+		printf("PMC-RESETOUT# is %s\n",
+		       FPGA_IN32(&fpga->hostctrl) & HOSTCTRL_PMCRSTOUT_FLAG ?
+		       "inactive" : "active");
+	}
+
+	return 0;
+}
+U_BOOT_CMD(
+	resetout,	2,	1,	do_resetout,
+	"resetout - assert PMC-RESETOUT# signal\n",
+	NULL
+	);
+
+
+int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	if (is_monarch()) {
+		printf("This command is only supported in non-monarch mode\n");
+		return -1;
+	}
+
+	if (argc > 1) {
+		if (argv[1][0] == '0') {
+			/* assert */
+			printf("inta# asserted\n");
+			out_be32((void*)GPIO1_TCR,
+				 in_be32((void*)GPIO1_TCR) | GPIO1_INTA_FAKE);
+		} else {
+			/* deassert */
+			printf("inta# deasserted\n");
+			out_be32((void*)GPIO1_TCR,
+				 in_be32((void*)GPIO1_TCR) & ~GPIO1_INTA_FAKE);
+		}
+	} else {
+		printf("inta# is %s\n", in_be32((void*)GPIO1_TCR) & GPIO1_INTA_FAKE ? "active" : "inactive");
+	}
+	return 0;
+}
+U_BOOT_CMD(
+	inta,	2,	1,	do_inta,
+	"inta    - Assert/Deassert or query INTA# state in non-monarch mode\n",
+	NULL
+	);
+
+
+/* test-only */
+int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	ulong pciaddr;
+
+	if (argc > 1) {
+		pciaddr = simple_strtoul(argv[1], NULL, 16);
+
+		pciaddr &= 0xf0000000;
+
+		/* map PCI address at 0xc0000000 in PLB space */
+		out32r(PCIX0_PMM1MA, 0x00000000); /* PMM1 Mask/Attribute - disabled b4 setting */
+		out32r(PCIX0_PMM1LA, 0xc0000000); /* PMM1 Local Address */
+		out32r(PCIX0_PMM1PCILA, pciaddr); /* PMM1 PCI Low Address */
+		out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM1 PCI High Address */
+		out32r(PCIX0_PMM1MA, 0xf0000001); /* 256MB + No prefetching, and enable region */
+	} else {
+		printf("Usage:\npmm %s\n", cmdtp->help);
+	}
+	return 0;
+}
+U_BOOT_CMD(
+	pmm,	2,	1,	do_pmm,
+	"pmm     - Setup pmm[1] registers\n",
+	"<pciaddr> (pciaddr will be aligned to 256MB)\n"
+	);
+
+#if defined(CFG_EEPROM_WREN)
+int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int query = argc == 1;
+	int state = 0;
+
+	if (query) {
+		/* Query write access state. */
+		state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, -1);
+		if (state < 0) {
+			puts("Query of write access state failed.\n");
+		} else {
+			printf("Write access for device 0x%0x is %sabled.\n",
+			       CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+			state = 0;
+		}
+	} else {
+		if ('0' == argv[1][0]) {
+			/* Disable write access. */
+			state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 0);
+		} else {
+			/* Enable write access. */
+			state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 1);
+		}
+		if (state < 0) {
+			puts("Setup of write access state failed.\n");
+		}
+	}
+
+	return state;
+}
+U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
+	   "eepwren - Enable / disable / query EEPROM write access\n",
+	   NULL);
+#endif /* #if defined(CFG_EEPROM_WREN) */
+
+#endif /* CONFIG_CMD_BSP */

board/esd/pmc440/config.mk

@@ -20,18 +20,14 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 # MA 02111-1307 USA
 #
-
 #
-# esd ADCIOP boards
+# AMCC 440EPx Reference Platform (Sequoia) board
 #
 
-#TEXT_BASE = 0xFFFE0000
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
 
-ifeq ($(ramsym),1)
+ifndef TEXT_BASE
-TEXT_BASE = 0x07FD0000
+TEXT_BASE = 0xFFFA0000
-else
-TEXT_BASE = 0xFFFC0000
-#TEXT_BASE = 0x01fc0000
 endif
 
 PLATFORM_CPPFLAGS += -DCONFIG_440=1

board/esd/pmc440/fpga.c

@@ -0,0 +1,461 @@
+/*
+ * (C) Copyright 2007
+ * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <spartan2.h>
+#include <spartan3.h>
+#include <command.h>
+#include "fpga.h"
+#include "pmc440.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_FPGA)
+
+#define USE_SP_CODE
+
+#ifdef USE_SP_CODE
+Xilinx_Spartan3_Slave_Parallel_fns pmc440_fpga_fns = {
+	fpga_pre_config_fn,
+	fpga_pgm_fn,
+	fpga_init_fn,
+	NULL, /* err */
+	fpga_done_fn,
+	fpga_clk_fn,
+	fpga_cs_fn,
+	fpga_wr_fn,
+	NULL, /* rdata */
+	fpga_wdata_fn,
+	fpga_busy_fn,
+	fpga_abort_fn,
+	fpga_post_config_fn,
+};
+#else
+Xilinx_Spartan3_Slave_Serial_fns pmc440_fpga_fns = {
+	fpga_pre_config_fn,
+	fpga_pgm_fn,
+	fpga_clk_fn,
+	fpga_init_fn,
+	fpga_done_fn,
+	fpga_wr_fn,
+	fpga_post_config_fn,
+};
+#endif
+
+Xilinx_Spartan2_Slave_Serial_fns ngcc_fpga_fns = {
+	ngcc_fpga_pre_config_fn,
+	ngcc_fpga_pgm_fn,
+	ngcc_fpga_clk_fn,
+	ngcc_fpga_init_fn,
+	ngcc_fpga_done_fn,
+	ngcc_fpga_wr_fn,
+	ngcc_fpga_post_config_fn
+};
+
+Xilinx_desc fpga[CONFIG_FPGA_COUNT] = {
+	XILINX_XC3S1200E_DESC(
+#ifdef USE_SP_CODE
+		slave_parallel,
+#else
+		slave_serial,
+#endif
+		(void *)&pmc440_fpga_fns,
+		0),
+	XILINX_XC2S200_DESC(
+		slave_serial,
+		(void *)&ngcc_fpga_fns,
+		0)
+};
+
+
+/*
+ * Set the active-low FPGA reset signal.
+ */
+void fpga_reset(int assert)
+{
+	debug("%s:%d: RESET ", __FUNCTION__, __LINE__);
+	if (assert) {
+		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_FPGA_DATA);
+		debug("asserted\n");
+	} else {
+		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_FPGA_DATA);
+		debug("deasserted\n");
+	}
+}
+
+
+/*
+ * Initialize the SelectMap interface.  We assume that the mode and the
+ * initial state of all of the port pins have already been set!
+ */
+void fpga_serialslave_init(void)
+{
+	debug("%s:%d: Initialize serial slave interface\n", __FUNCTION__,
+	      __LINE__);
+	fpga_pgm_fn(FALSE, FALSE, 0);	/* make sure program pin is inactive */
+}
+
+
+/*
+ * Set the FPGA's active-low SelectMap program line to the specified level
+ */
+int fpga_pgm_fn(int assert, int flush, int cookie)
+{
+	debug("%s:%d: FPGA PROGRAM ",
+	      __FUNCTION__, __LINE__);
+
+	if (assert) {
+		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_FPGA_PRG);
+		debug("asserted\n");
+	} else {
+		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_FPGA_PRG);
+		debug("deasserted\n");
+	}
+	return assert;
+}
+
+
+/*
+ * Test the state of the active-low FPGA INIT line.  Return 1 on INIT
+ * asserted (low).
+ */
+int fpga_init_fn(int cookie)
+{
+	if (in_be32((void*)GPIO1_IR) & GPIO1_FPGA_INIT)
+		return 0;
+	else
+		return 1;
+}
+
+#ifdef USE_SP_CODE
+int fpga_abort_fn(int cookie)
+{
+	return 0;
+}
+
+
+int fpga_cs_fn(int assert_cs, int flush, int cookie)
+{
+	return assert_cs;
+}
+
+
+int fpga_busy_fn(int cookie)
+{
+	return 1;
+}
+#endif
+
+
+/*
+ * Test the state of the active-high FPGA DONE pin
+ */
+int fpga_done_fn(int cookie)
+{
+	if (in_be32((void*)GPIO1_IR) & GPIO1_FPGA_DONE)
+		return 1;
+	else
+		return 0;
+}
+
+
+/*
+ * FPGA pre-configuration function. Just make sure that
+ * FPGA reset is asserted to keep the FPGA from starting up after
+ * configuration.
+ */
+int fpga_pre_config_fn(int cookie)
+{
+	debug("%s:%d: FPGA pre-configuration\n", __FUNCTION__, __LINE__);
+	fpga_reset(TRUE);
+
+	/* release init# */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | GPIO0_FPGA_FORCEINIT);
+	/* disable PLD IOs */
+	out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_IOEN_N);
+	return 0;
+}
+
+
+/*
+ * FPGA post configuration function. Blip the FPGA reset line and then see if
+ * the FPGA appears to be running.
+ */
+int fpga_post_config_fn(int cookie)
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
+	int rc=0;
+	char *s;
+
+	debug("%s:%d: FPGA post configuration\n", __FUNCTION__, __LINE__);
+
+	/* enable PLD0..7 pins */
+	out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_IOEN_N);
+
+	fpga_reset(TRUE);
+	udelay (100);
+	fpga_reset(FALSE);
+	udelay (100);
+
+	FPGA_OUT32(&fpga->status, (gd->board_type << STATUS_HWREV_SHIFT) & STATUS_HWREV_MASK);
+
+	/* NGCC only: enable ledlink */
+	if ((s = getenv("bd_type")) && !strcmp(s, "ngcc"))
+		FPGA_SETBITS(&fpga->ctrla, 0x29f8c000);
+
+	return rc;
+}
+
+
+int fpga_clk_fn(int assert_clk, int flush, int cookie)
+{
+	if (assert_clk)
+		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_FPGA_CLK);
+	else
+		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_FPGA_CLK);
+
+	return assert_clk;
+}
+
+
+int fpga_wr_fn(int assert_write, int flush, int cookie)
+{
+	if (assert_write)
+		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_FPGA_DATA);
+	else
+		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_FPGA_DATA);
+
+	return assert_write;
+}
+
+#ifdef USE_SP_CODE
+int fpga_wdata_fn(uchar data, int flush, int cookie)
+{
+	uchar val = data;
+	ulong or = in_be32((void*)GPIO1_OR);
+	int i = 7;
+	do {
+		/* Write data */
+		if (val & 0x80)
+			or = (or & ~GPIO1_FPGA_CLK) | GPIO1_FPGA_DATA;
+		else
+			or = or & ~(GPIO1_FPGA_CLK | GPIO1_FPGA_DATA);
+
+		out_be32((void*)GPIO1_OR, or);
+
+		/* Assert the clock */
+		or |= GPIO1_FPGA_CLK;
+		out_be32((void*)GPIO1_OR, or);
+		val <<= 1;
+		i --;
+	} while (i > 0);
+
+	/* Write last data bit (the 8th clock comes from the sp_load() code */
+	if (val & 0x80)
+		or = (or & ~GPIO1_FPGA_CLK) | GPIO1_FPGA_DATA;
+	else
+		or = or & ~(GPIO1_FPGA_CLK | GPIO1_FPGA_DATA);
+
+	out_be32((void*)GPIO1_OR, or);
+
+	return 0;
+}
+#endif
+
+#define NGCC_FPGA_PRG  CLOCK_EN
+#define NGCC_FPGA_DATA RESET_OUT
+#define NGCC_FPGA_DONE CLOCK_IN
+#define NGCC_FPGA_INIT IRIGB_R_IN
+#define NGCC_FPGA_CLK  CLOCK_OUT
+
+void ngcc_fpga_serialslave_init(void)
+{
+	debug("%s:%d: Initialize serial slave interface\n",
+	      __FUNCTION__, __LINE__);
+
+	/* make sure program pin is inactive */
+	ngcc_fpga_pgm_fn (FALSE, FALSE, 0);
+}
+
+/*
+ * Set the active-low FPGA reset signal.
+ */
+void ngcc_fpga_reset(int assert)
+{
+	debug("%s:%d: RESET ", __FUNCTION__, __LINE__);
+
+	if (assert) {
+		FPGA_CLRBITS(NGCC_CTRL_BASE, NGCC_CTRL_FPGARST_N);
+		debug("asserted\n");
+	} else {
+		FPGA_SETBITS(NGCC_CTRL_BASE, NGCC_CTRL_FPGARST_N);
+		debug("deasserted\n");
+	}
+}
+
+
+/*
+ * Set the FPGA's active-low SelectMap program line to the specified level
+ */
+int ngcc_fpga_pgm_fn(int assert, int flush, int cookie)
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
+
+	debug("%s:%d: FPGA PROGRAM ", __FUNCTION__, __LINE__);
+
+	if (assert) {
+		FPGA_CLRBITS(&fpga->ctrla, NGCC_FPGA_PRG);
+		debug("asserted\n");
+	} else {
+		FPGA_SETBITS(&fpga->ctrla, NGCC_FPGA_PRG);
+		debug("deasserted\n");
+	}
+
+	return assert;
+}
+
+
+/*
+ * Test the state of the active-low FPGA INIT line.  Return 1 on INIT
+ * asserted (low).
+ */
+int ngcc_fpga_init_fn(int cookie)
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
+
+	debug("%s:%d: INIT check... ", __FUNCTION__, __LINE__);
+	if (FPGA_IN32(&fpga->status) & NGCC_FPGA_INIT) {
+		debug("high\n");
+		return 0;
+	} else {
+		debug("low\n");
+		return 1;
+	}
+}
+
+
+/*
+ * Test the state of the active-high FPGA DONE pin
+ */
+int ngcc_fpga_done_fn(int cookie)
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
+
+	debug("%s:%d: DONE check... ", __FUNCTION__, __LINE__);
+	if (FPGA_IN32(&fpga->status) & NGCC_FPGA_DONE) {
+		debug("DONE high\n");
+		return 1;
+	} else {
+		debug("low\n");
+		return 0;
+	}
+}
+
+
+/*
+ * FPGA pre-configuration function.
+ */
+int ngcc_fpga_pre_config_fn(int cookie)
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
+	debug("%s:%d: FPGA pre-configuration\n", __FUNCTION__, __LINE__);
+
+	ngcc_fpga_reset(TRUE);
+	FPGA_CLRBITS(&fpga->ctrla, 0xfffffe00);
+
+	ngcc_fpga_reset(TRUE);
+	return 0;
+}
+
+
+/*
+ * FPGA post configuration function. Blip the FPGA reset line and then see if
+ * the FPGA appears to be running.
+ */
+int ngcc_fpga_post_config_fn(int cookie)
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
+
+	debug("%s:%d: NGCC FPGA post configuration\n", __FUNCTION__, __LINE__);
+
+	udelay (100);
+	ngcc_fpga_reset(FALSE);
+
+	FPGA_SETBITS(&fpga->ctrla, 0x29f8c000);
+
+	return 0;
+}
+
+
+int ngcc_fpga_clk_fn(int assert_clk, int flush, int cookie)
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
+
+	if (assert_clk)
+		FPGA_SETBITS(&fpga->ctrla, NGCC_FPGA_CLK);
+	else
+		FPGA_CLRBITS(&fpga->ctrla, NGCC_FPGA_CLK);
+
+	return assert_clk;
+}
+
+
+int ngcc_fpga_wr_fn(int assert_write, int flush, int cookie)
+{
+	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
+
+	if (assert_write)
+		FPGA_SETBITS(&fpga->ctrla, NGCC_FPGA_DATA);
+	else
+		FPGA_CLRBITS(&fpga->ctrla, NGCC_FPGA_DATA);
+
+	return assert_write;
+}
+
+
+/*
+ * Initialize the fpga.  Return 1 on success, 0 on failure.
+ */
+int pmc440_init_fpga(void)
+{
+	char *s;
+
+	debug("%s:%d: Initialize FPGA interface (relocation offset = 0x%.8lx)\n",
+	      __FUNCTION__, __LINE__, gd->reloc_off);
+	fpga_init(gd->reloc_off);
+
+	fpga_serialslave_init ();
+	debug("%s:%d: Adding fpga 0\n", __FUNCTION__, __LINE__);
+	fpga_add (fpga_xilinx, &fpga[0]);
+
+	/* NGCC only */
+	if ((s = getenv("bd_type")) && !strcmp(s, "ngcc")) {
+		ngcc_fpga_serialslave_init ();
+		debug("%s:%d: Adding fpga 1\n", __FUNCTION__, __LINE__);
+		fpga_add (fpga_xilinx, &fpga[1]);
+	}
+
+	return 0;
+}
+#endif /* CONFIG_FPGA */

board/esd/pmc440/fpga.h

@@ -0,0 +1,47 @@
+/*
+ * (C) Copyright 2007
+ * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+extern int pmc440_init_fpga(void);
+
+extern int fpga_pgm_fn(int assert_pgm, int flush, int cookie);
+extern int fpga_init_fn(int cookie);
+extern int fpga_err_fn(int cookie);
+extern int fpga_done_fn(int cookie);
+extern int fpga_clk_fn(int assert_clk, int flush, int cookie);
+extern int fpga_cs_fn(int assert_cs, int flush, int cookie);
+extern int fpga_wr_fn(int assert_write, int flush, int cookie);
+extern int fpga_wdata_fn (uchar data, int flush, int cookie);
+extern int fpga_read_data_fn(unsigned char *data, int cookie);
+extern int fpga_write_data_fn(unsigned char data, int flush, int cookie);
+extern int fpga_busy_fn(int cookie);
+extern int fpga_abort_fn(int cookie );
+extern int fpga_pre_config_fn(int cookie );
+extern int fpga_post_config_fn(int cookie );
+
+extern int ngcc_fpga_pgm_fn(int assert_pgm, int flush, int cookie);
+extern int ngcc_fpga_init_fn(int cookie);
+extern int ngcc_fpga_done_fn(int cookie);
+extern int ngcc_fpga_clk_fn(int assert_clk, int flush, int cookie);
+extern int ngcc_fpga_wr_fn(int assert_write, int flush, int cookie);
+extern int ngcc_fpga_pre_config_fn(int cookie );
+extern int ngcc_fpga_post_config_fn(int cookie );

board/esd/pmc440/init.S

@@ -0,0 +1,122 @@
+/*
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <asm-ppc/mmu.h>
+#include <config.h>
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ *  Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+    .section .bootpg,"ax"
+    .globl tlbtab
+
+tlbtab:
+	tlbtab_start
+
+	/*
+	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+	 * speed up boot process. It is patched after relocation to enable SA_I
+	 */
+#ifndef CONFIG_NAND_SPL
+	tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
+#else
+	tlbentry( CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G )
+#endif
+
+	/* TLB-entry for DDR SDRAM (Up to 2GB) */
+#ifdef CONFIG_4xx_DCACHE
+	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G)
+#else
+	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+#endif
+
+#ifdef CFG_INIT_RAM_DCACHE
+	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
+	tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+#endif
+
+	/* TLB-entry for PCI Memory */
+	tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
+
+	/* TLB-entries for EBC */
+	/* PMC440 maps EBC to 0xef000000 which is handled by the peripheral
+	 * tlb entry.
+	 * This dummy entry is only for convinience in order not to modify the
+	 * amount of entries. Currently OS/9 relies on this :-)
+	 */
+	tlbentry( 0xc0000000, SZ_256M, 0xc0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+	/* TLB-entry for NAND */
+	tlbentry( CFG_NAND_ADDR, SZ_1K, CFG_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+	/* TLB-entry for Internal Registers & OCM */
+	tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0,  AC_R|AC_W|AC_X|SA_I )
+
+	/*TLB-entry PCI registers*/
+	tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1,  AC_R|AC_W|AC_X|SA_G|SA_I )
+
+	/* TLB-entry for peripherals */
+	tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+	/* TLB-entry PCI IO space */
+	tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+	/* TODO:  what about high IO space */
+	tlbtab_end
+
+#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+	/*
+	 * For NAND booting the first TLB has to be reconfigured to full size
+	 * and with caching disabled after running from RAM!
+	 */
+#define TLB00	TLB0(CFG_BOOT_BASE_ADDR, SZ_256M)
+#define TLB01	TLB1(CFG_BOOT_BASE_ADDR, 1)
+#define TLB02	TLB2(AC_R|AC_W|AC_X|SA_G|SA_I)
+
+	.globl	reconfig_tlb0
+reconfig_tlb0:
+	sync
+	isync
+	addi	r4,r0,0x0000		/* TLB entry #0 */
+	lis	r5,TLB00@h
+	ori	r5,r5,TLB00@l
+	tlbwe	r5,r4,0x0000		/* Save it out */
+	lis	r5,TLB01@h
+	ori	r5,r5,TLB01@l
+	tlbwe	r5,r4,0x0001		/* Save it out */
+	lis	r5,TLB02@h
+	ori	r5,r5,TLB02@l
+	tlbwe	r5,r4,0x0002		/* Save it out */
+	sync
+	isync
+	blr
+#endif

board/esd/pmc440/pmc440.c

@@ -0,0 +1,898 @@
+/*
+ * (C) Copyright 2007
+ * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com.
+ * Based on board/amcc/sequoia/sequoia.c
+ *
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Alain Saurel,	    AMCC/IBM, alain.saurel@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <ppc440.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <command.h>
+#include <i2c.h>
+#ifdef CONFIG_RESET_PHY_R
+#include <miiphy.h>
+#endif
+#include <serial.h>
+#include "fpga.h"
+#include "pmc440.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+ulong flash_get_size(ulong base, int banknum);
+int pci_is_66mhz(void);
+int bootstrap_eeprom_read(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
+
+
+struct serial_device *default_serial_console(void)
+{
+	uchar buf[4];
+	ulong delay;
+	int i;
+	ulong val;
+
+	/*
+	 * Use default console on P4 when strapping jumper
+	 * is installed (bootstrap option != 'H').
+	 */
+	mfsdr(SDR_PINSTP, val);
+	if (((val & 0xf0000000) >> 29) != 7)
+		return &serial1_device;
+
+	ulong scratchreg = in_be32((void*)GPIO0_ISR3L);
+	if (!(scratchreg & 0x80)) {
+		/* mark scratchreg valid */
+		scratchreg = (scratchreg & 0xffffff00) | 0x80;
+
+		i = bootstrap_eeprom_read(CFG_I2C_BOOT_EEPROM_ADDR, 0x10, buf, 4);
+		if ((i != -1) && (buf[0] == 0x19) && (buf[1] == 0x75)) {
+			scratchreg |= buf[2];
+
+			/* bringup delay for console */
+			for (delay=0; delay<(1000 * (ulong)buf[3]); delay++) {
+				udelay(1000);
+			}
+		} else
+			scratchreg |= 0x01;
+		out_be32((void*)GPIO0_ISR3L, scratchreg);
+	}
+
+	if (scratchreg & 0x01)
+		return &serial1_device;
+	else
+		return &serial0_device;
+}
+
+int board_early_init_f(void)
+{
+	u32 sdr0_cust0;
+	u32 sdr0_pfc1, sdr0_pfc2;
+	u32 reg;
+
+	/* general EBC configuration (disable EBC timeouts) */
+	mtdcr(ebccfga, xbcfg);
+	mtdcr(ebccfgd, 0xf8400000);
+
+	/*--------------------------------------------------------------------
+	 * Setup the GPIO pins
+	 * TODO: setup GPIOs via CFG_4xx_GPIO_TABLE in board's config file
+	 *-------------------------------------------------------------------*/
+	out32(GPIO0_OR,    0x40000002);
+	out32(GPIO0_TCR,   0x4c90011f);
+	out32(GPIO0_OSRL,  0x28011400);
+	out32(GPIO0_OSRH,  0x55005000);
+	out32(GPIO0_TSRL,  0x08011400);
+	out32(GPIO0_TSRH,  0x55005000);
+	out32(GPIO0_ISR1L, 0x54000000);
+	out32(GPIO0_ISR1H, 0x00000000);
+	out32(GPIO0_ISR2L, 0x44000000);
+	out32(GPIO0_ISR2H, 0x00000100);
+	out32(GPIO0_ISR3L, 0x00000000);
+	out32(GPIO0_ISR3H, 0x00000000);
+
+	out32(GPIO1_OR,    0x80002408);
+	out32(GPIO1_TCR,   0xd6003c08);
+	out32(GPIO1_OSRL,  0x0a5a0000);
+	out32(GPIO1_OSRH,  0x00000000);
+	out32(GPIO1_TSRL,  0x00000000);
+	out32(GPIO1_TSRH,  0x00000000);
+	out32(GPIO1_ISR1L, 0x00005555);
+	out32(GPIO1_ISR1H, 0x40000000);
+	out32(GPIO1_ISR2L, 0x04010000);
+	out32(GPIO1_ISR2H, 0x00000000);
+	out32(GPIO1_ISR3L, 0x01400000);
+	out32(GPIO1_ISR3H, 0x00000000);
+
+	/* patch PLB:PCI divider for 66MHz PCI */
+	mfcpr(clk_spcid, reg);
+	if (pci_is_66mhz() && (reg != 0x02000000)) {
+		mtcpr(clk_spcid, 0x02000000); /* 133MHZ : 2 for 66MHz PCI */
+
+		mfcpr(clk_icfg, reg);
+		reg |= CPR0_ICFG_RLI_MASK;
+		mtcpr(clk_icfg, reg);
+
+		mtspr(dbcr0, 0x20000000); /* do chip reset */
+	}
+
+	/*--------------------------------------------------------------------
+	 * Setup the interrupt controller polarities, triggers, etc.
+	 *-------------------------------------------------------------------*/
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+	mtdcr(uic0er, 0x00000000);	/* disable all */
+	mtdcr(uic0cr, 0x00000005);	/* ATI & UIC1 crit are critical */
+	mtdcr(uic0pr, 0xfffff7ef);
+	mtdcr(uic0tr, 0x00000000);
+	mtdcr(uic0vr, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+	mtdcr(uic1er, 0x00000000);	/* disable all */
+	mtdcr(uic1cr, 0x00000000);	/* all non-critical */
+	mtdcr(uic1pr, 0xffffc7f5);
+	mtdcr(uic1tr, 0x00000000);
+	mtdcr(uic1vr, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+
+	mtdcr(uic2sr, 0xffffffff);	/* clear all */
+	mtdcr(uic2er, 0x00000000);	/* disable all */
+	mtdcr(uic2cr, 0x00000000);	/* all non-critical */
+	mtdcr(uic2pr, 0x27ffffff);
+	mtdcr(uic2tr, 0x00000000);
+	mtdcr(uic2vr, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(uic2sr, 0xffffffff);	/* clear all */
+
+	/* select Ethernet pins */
+	mfsdr(SDR0_PFC1, sdr0_pfc1);
+	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | SDR0_PFC1_SELECT_CONFIG_4;
+	mfsdr(SDR0_PFC2, sdr0_pfc2);
+	sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | SDR0_PFC2_SELECT_CONFIG_4;
+
+	/* enable 2nd IIC */
+	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL;
+
+	mtsdr(SDR0_PFC2, sdr0_pfc2);
+	mtsdr(SDR0_PFC1, sdr0_pfc1);
+
+	/* setup NAND FLASH */
+	mfsdr(SDR0_CUST0, sdr0_cust0);
+	sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL	|
+		SDR0_CUST0_NDFC_ENABLE		|
+		SDR0_CUST0_NDFC_BW_8_BIT	|
+		SDR0_CUST0_NDFC_ARE_MASK	|
+		(0x80000000 >> (28 + CFG_NAND_CS));
+	mtsdr(SDR0_CUST0, sdr0_cust0);
+
+	return 0;
+}
+
+/*---------------------------------------------------------------------------+
+  | misc_init_r.
+  +---------------------------------------------------------------------------*/
+int misc_init_r(void)
+{
+	uint pbcr;
+	int size_val = 0;
+	u32 reg;
+	unsigned long usb2d0cr = 0;
+	unsigned long usb2phy0cr, usb2h0cr = 0;
+	unsigned long sdr0_pfc1;
+	char *act = getenv("usbact");
+
+	/*
+	 * FLASH stuff...
+	 */
+
+	/* Re-do sizing to get full correct info */
+
+	/* adjust flash start and offset */
+	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
+	gd->bd->bi_flashoffset = 0;
+
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+	mtdcr(ebccfga, pb2cr);
+#else
+	mtdcr(ebccfga, pb0cr);
+#endif
+	pbcr = mfdcr(ebccfgd);
+	switch (gd->bd->bi_flashsize) {
+	case 1 << 20:
+		size_val = 0;
+		break;
+	case 2 << 20:
+		size_val = 1;
+		break;
+	case 4 << 20:
+		size_val = 2;
+		break;
+	case 8 << 20:
+		size_val = 3;
+		break;
+	case 16 << 20:
+		size_val = 4;
+		break;
+	case 32 << 20:
+		size_val = 5;
+		break;
+	case 64 << 20:
+		size_val = 6;
+		break;
+	case 128 << 20:
+		size_val = 7;
+		break;
+	}
+	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+	mtdcr(ebccfga, pb2cr);
+#else
+	mtdcr(ebccfga, pb0cr);
+#endif
+	mtdcr(ebccfgd, pbcr);
+
+	/*
+	 * Re-check to get correct base address
+	 */
+	flash_get_size(gd->bd->bi_flashstart, 0);
+
+#ifdef CFG_ENV_IS_IN_FLASH
+	/* Monitor protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET,
+			    -CFG_MONITOR_LEN,
+			    0xffffffff,
+			    &flash_info[0]);
+
+	/* Env protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET,
+			    CFG_ENV_ADDR_REDUND,
+			    CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
+			    &flash_info[0]);
+#endif
+
+	/*
+	 * USB suff...
+	 */
+	if ((act == NULL || strcmp(act, "hostdev") == 0) &&
+	    !(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)){
+		/* SDR Setting */
+		mfsdr(SDR0_PFC1, sdr0_pfc1);
+		mfsdr(SDR0_USB2D0CR, usb2d0cr);
+		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+		mfsdr(SDR0_USB2H0CR, usb2h0cr);
+
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;	/*1*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;		/*0*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;		/*1*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;		/*1*/
+
+		/* An 8-bit/60MHz interface is the only possible alternative
+		   when connecting the Device to the PHY */
+		usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
+		usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;	/*1*/
+
+		usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
+		sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
+
+		mtsdr(SDR0_PFC1, sdr0_pfc1);
+		mtsdr(SDR0_USB2D0CR, usb2d0cr);
+		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+		mtsdr(SDR0_USB2H0CR, usb2h0cr);
+
+		/*clear resets*/
+		udelay(1000);
+		mtsdr(SDR0_SRST1, 0x00000000);
+		udelay(1000);
+		mtsdr(SDR0_SRST0, 0x00000000);
+
+		printf("USB:   Host\n");
+
+	} else if ((strcmp(act, "dev") == 0) || (in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)) {
+		/*-------------------PATCH-------------------------------*/
+		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;		/*0*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;		/*1*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;		/*1*/
+		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+
+		udelay (1000);
+		mtsdr(SDR0_SRST1, 0x672c6000);
+
+		udelay (1000);
+		mtsdr(SDR0_SRST0, 0x00000080);
+
+		udelay (1000);
+		mtsdr(SDR0_SRST1, 0x60206000);
+
+		*(unsigned int *)(0xe0000350) = 0x00000001;
+
+		udelay (1000);
+		mtsdr(SDR0_SRST1, 0x60306000);
+		/*-------------------PATCH-------------------------------*/
+
+		/* SDR Setting */
+		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+		mfsdr(SDR0_USB2H0CR, usb2h0cr);
+		mfsdr(SDR0_USB2D0CR, usb2d0cr);
+		mfsdr(SDR0_PFC1, sdr0_pfc1);
+
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ;	/*0*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN;		/*1*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV;		/*0*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV;		/*0*/
+
+		usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
+		usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ;		/*0*/
+
+		usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
+
+		sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
+		sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL;		/*1*/
+
+		mtsdr(SDR0_USB2H0CR, usb2h0cr);
+		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+		mtsdr(SDR0_USB2D0CR, usb2d0cr);
+		mtsdr(SDR0_PFC1, sdr0_pfc1);
+
+		/*clear resets*/
+		udelay(1000);
+		mtsdr(SDR0_SRST1, 0x00000000);
+		udelay(1000);
+		mtsdr(SDR0_SRST0, 0x00000000);
+
+		printf("USB:   Device\n");
+	}
+
+	/*
+	 * Clear PLB4A0_ACR[WRP]
+	 * This fix will make the MAL burst disabling patch for the Linux
+	 * EMAC driver obsolete.
+	 */
+	reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP;
+	mtdcr(plb4_acr, reg);
+
+#ifdef CONFIG_FPGA
+	pmc440_init_fpga();
+#endif
+
+	/* turn off POST LED */
+	out_be32((void*)GPIO1_OR,  in_be32((void*)GPIO1_OR) & ~GPIO1_POST_N);
+	/* turn on RUN LED */
+	out_be32((void*)GPIO0_OR,  in_be32((void*)GPIO0_OR) & ~GPIO0_LED_RUN_N);
+	return 0;
+}
+
+int is_monarch(void)
+{
+	if (in_be32((void*)GPIO1_IR) & GPIO1_NONMONARCH)
+		return 0;
+
+	return 1;
+}
+
+int pci_is_66mhz(void)
+{
+	if (in_be32((void*)GPIO1_IR) & GPIO1_M66EN)
+		return 1;
+	return 0;
+}
+
+int board_revision(void)
+{
+	return (int)((in_be32((void*)GPIO1_IR) & GPIO1_HWID_MASK) >> 4);
+}
+
+int checkboard(void)
+{
+	puts("Board: esd GmbH - PMC440");
+
+	gd->board_type = board_revision();
+	printf(", Rev 1.%ld, ", gd->board_type);
+
+	if (!is_monarch()) {
+		puts("non-");
+	}
+
+	printf("monarch, PCI=%s MHz\n", pci_is_66mhz() ? "66" : "33");
+	return (0);
+}
+
+
+#if defined(CONFIG_PCI) && defined(CONFIG_PCI_PNP)
+/*
+ * Assign interrupts to PCI devices. Some OSs rely on this.
+ */
+void pmc440_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+{
+	unsigned char int_line[] = {IRQ_PCIC, IRQ_PCID, IRQ_PCIA, IRQ_PCIB};
+
+	pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE,
+				   int_line[PCI_DEV(dev) & 0x03]);
+}
+#endif
+
+/*************************************************************************
+ *  pci_pre_init
+ *
+ *  This routine is called just prior to registering the hose and gives
+ *  the board the opportunity to check things. Returning a value of zero
+ *  indicates that things are bad & PCI initialization should be aborted.
+ *
+ *	Different boards may wish to customize the pci controller structure
+ *	(add regions, override default access routines, etc) or perform
+ *	certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int pci_pre_init(struct pci_controller *hose)
+{
+	unsigned long addr;
+
+	/*-------------------------------------------------------------------------+
+	  | Set priority for all PLB3 devices to 0.
+	  | Set PLB3 arbiter to fair mode.
+	  +-------------------------------------------------------------------------*/
+	mfsdr(sdr_amp1, addr);
+	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(plb3_acr);
+	mtdcr(plb3_acr, addr | 0x80000000);
+
+	/*-------------------------------------------------------------------------+
+	  | Set priority for all PLB4 devices to 0.
+	  +-------------------------------------------------------------------------*/
+	mfsdr(sdr_amp0, addr);
+	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
+	mtdcr(plb4_acr, addr);
+
+	/*-------------------------------------------------------------------------+
+	  | Set Nebula PLB4 arbiter to fair mode.
+	  +-------------------------------------------------------------------------*/
+	/* Segment0 */
+	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
+	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
+	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
+	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
+	mtdcr(plb0_acr, addr);
+
+	/* Segment1 */
+	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
+	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
+	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
+	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
+	mtdcr(plb1_acr, addr);
+
+#ifdef CONFIG_PCI_PNP
+	hose->fixup_irq = pmc440_pci_fixup_irq;
+#endif
+
+	return 1;
+}
+#endif /* defined(CONFIG_PCI) */
+
+/*************************************************************************
+ *  pci_target_init
+ *
+ *	The bootstrap configuration provides default settings for the pci
+ *	inbound map (PIM). But the bootstrap config choices are limited and
+ *	may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+	/*--------------------------------------------------------------------------+
+	 * Set up Direct MMIO registers
+	 *--------------------------------------------------------------------------*/
+	/*--------------------------------------------------------------------------+
+	  | PowerPC440EPX PCI Master configuration.
+	  | Map one 1Gig range of PLB/processor addresses to PCI memory space.
+	  |   PLB address 0x80000000-0xBFFFFFFF ==> PCI address 0x80000000-0xBFFFFFFF
+	  |   Use byte reversed out routines to handle endianess.
+	  | Make this region non-prefetchable.
+	  +--------------------------------------------------------------------------*/
+	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIX0_PMM0MA, 0xc0000001);	/* 1G + No prefetching, and enable region */
+
+	if (!is_monarch()) {
+		/* BAR1: top 64MB of RAM */
+		out32r(PCIX0_PTM1MS, 0xfc000001);	/* Memory Size/Attribute */
+		out32r(PCIX0_PTM1LA, 0x0c000000);       /* Local Addr. Reg */
+	} else {
+		/* BAR1: complete 256MB RAM (TODO: make dynamic) */
+		out32r(PCIX0_PTM1MS, 0xf0000001);	/* Memory Size/Attribute */
+		out32r(PCIX0_PTM1LA, 0x00000000);       /* Local Addr. Reg */
+	}
+
+	/* BAR2: 16 MB FPGA registers */
+	out32r(PCIX0_PTM2MS, 0xff000001);	/* Memory Size/Attribute */
+	out32r(PCIX0_PTM2LA, 0xef000000);	/* Local Addr. Reg */
+
+	if (is_monarch()) {
+		/* BAR2: map FPGA registers behind system memory at 1GB */
+		pci_write_config_dword(0, PCI_BASE_ADDRESS_2, 0x40000008);
+	}
+
+	/*--------------------------------------------------------------------------+
+	 * Set up Configuration registers
+	 *--------------------------------------------------------------------------*/
+
+	/* Program the board's vendor id */
+	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+			      CFG_PCI_SUBSYS_VENDORID);
+
+#if 0   /* disabled for PMC405 backward compatibility */
+	/* Configure command register as bus master */
+	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+#endif
+
+	/* 240nS PCI clock */
+	pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+	/* No error reporting */
+	pci_write_config_word(0, PCI_ERREN, 0);
+
+	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+
+	if (!is_monarch()) {
+		/* Program the board's subsystem id/classcode */
+		pci_write_config_word(0, PCI_SUBSYSTEM_ID,
+				      CFG_PCI_SUBSYS_ID_NONMONARCH);
+		pci_write_config_word(0, PCI_CLASS_SUB_CODE,
+				      CFG_PCI_CLASSCODE_NONMONARCH);
+
+		/* PCI configuration done: release ERREADY */
+		out_be32((void*)GPIO1_OR,  in_be32((void*)GPIO1_OR)  | GPIO1_PPC_EREADY);
+		out_be32((void*)GPIO1_TCR, in_be32((void*)GPIO1_TCR) | GPIO1_PPC_EREADY);
+	} else {
+		/* Program the board's subsystem id/classcode */
+		pci_write_config_word(0, PCI_SUBSYSTEM_ID,
+				      CFG_PCI_SUBSYS_ID_MONARCH);
+		pci_write_config_word(0, PCI_CLASS_SUB_CODE,
+				      CFG_PCI_CLASSCODE_MONARCH);
+	}
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ *  pci_master_init
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+void pci_master_init(struct pci_controller *hose)
+{
+	unsigned short temp_short;
+
+	/*--------------------------------------------------------------------------+
+	  | Write the PowerPC440 EP PCI Configuration regs.
+	  |   Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+	  |   Enable PowerPC440 EP to act as a PCI memory target (PTM).
+	  +--------------------------------------------------------------------------*/
+	if (is_monarch()) {
+		pci_read_config_word(0, PCI_COMMAND, &temp_short);
+		pci_write_config_word(0, PCI_COMMAND,
+				      temp_short | PCI_COMMAND_MASTER |
+				      PCI_COMMAND_MEMORY);
+	}
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+
+
+static void wait_for_pci_ready(void)
+{
+	int i;
+	char *s = getenv("pcidelay");
+	if (s) {
+		int ms = simple_strtoul(s, NULL, 10);
+		printf("PCI:   Waiting for %d ms\n", ms);
+		for (i=0; i<ms; i++)
+			udelay(1000);
+	}
+
+	if (!(in_be32((void*)GPIO1_IR) & GPIO1_PPC_EREADY)) {
+		printf("PCI:   Waiting for EREADY (CTRL-C to skip) ... ");
+		while (1) {
+			if (ctrlc()) {
+				puts("abort\n");
+				break;
+			}
+			if (in_be32((void*)GPIO1_IR) & GPIO1_PPC_EREADY) {
+				printf("done\n");
+				break;
+			}
+		}
+	}
+}
+
+
+/*************************************************************************
+ *  is_pci_host
+ *
+ *	This routine is called to determine if a pci scan should be
+ *	performed. With various hardware environments (especially cPCI and
+ *	PPMC) it's insufficient to depend on the state of the arbiter enable
+ *	bit in the strap register, or generic host/adapter assumptions.
+ *
+ *	Rather than hard-code a bad assumption in the general 440 code, the
+ *	440 pci code requires the board to decide at runtime.
+ *
+ *	Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+	char *s = getenv("pciscan");
+	if (s == NULL)
+		if (is_monarch()) {
+			wait_for_pci_ready();
+			return 1;
+		} else
+			return 0;
+	else if (!strcmp(s, "yes"))
+		return 1;
+
+	return 0;
+}
+#endif /* defined(CONFIG_PCI) */
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+	return 0;	/* No hotkeys supported */
+}
+#endif /* CONFIG_POST */
+
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+	if (miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x1f, 0x0001) == 0) {
+		miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, 0x0010);
+		miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, 0x0df0);
+		miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x10, 0x0e10);
+		miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x1f, 0x0000);
+	}
+
+	if (miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x1f, 0x0001) == 0) {
+		miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x11, 0x0010);
+		miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x11, 0x0df0);
+		miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x10, 0x0e10);
+		miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x1f, 0x0000);
+	}
+}
+#endif
+
+#if defined(CFG_EEPROM_WREN)
+/* Input: <dev_addr>  I2C address of EEPROM device to enable.
+ *         <state>     -1: deliver current state
+ *	               0: disable write
+ *		       1: enable write
+ *  Returns:           -1: wrong device address
+ *                      0: dis-/en- able done
+ *		     0/1: current state if <state> was -1.
+ */
+int eeprom_write_enable(unsigned dev_addr, int state)
+{
+	if ((CFG_I2C_EEPROM_ADDR != dev_addr) && (CFG_I2C_BOOT_EEPROM_ADDR != dev_addr)) {
+		return -1;
+	} else {
+		switch (state) {
+		case 1:
+			/* Enable write access, clear bit GPIO_SINT2. */
+			out32(GPIO0_OR, in32(GPIO0_OR) & ~GPIO0_EP_EEP);
+			state = 0;
+			break;
+		case 0:
+			/* Disable write access, set bit GPIO_SINT2. */
+			out32(GPIO0_OR, in32(GPIO0_OR) | GPIO0_EP_EEP);
+			state = 0;
+			break;
+		default:
+			/* Read current status back. */
+			state = (0 == (in32(GPIO0_OR) & GPIO0_EP_EEP));
+			break;
+		}
+	}
+	return state;
+}
+#endif /* #if defined(CFG_EEPROM_WREN) */
+
+
+#define CFG_BOOT_EEPROM_PAGE_WRITE_BITS 3
+int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
+{
+	unsigned end = offset + cnt;
+	unsigned blk_off;
+	int rcode = 0;
+
+#if defined(CFG_EEPROM_WREN)
+	eeprom_write_enable(dev_addr, 1);
+#endif
+	/* Write data until done or would cross a write page boundary.
+	 * We must write the address again when changing pages
+	 * because the address counter only increments within a page.
+	 */
+
+	while (offset < end) {
+		unsigned alen, len;
+		unsigned maxlen;
+		uchar addr[2];
+
+		blk_off = offset & 0xFF;	/* block offset */
+
+		addr[0] = offset >> 8;		/* block number */
+		addr[1] = blk_off;		/* block offset */
+		alen	= 2;
+		addr[0] |= dev_addr;		/* insert device address */
+
+		len = end - offset;
+
+#define	BOOT_EEPROM_PAGE_SIZE	   (1 << CFG_BOOT_EEPROM_PAGE_WRITE_BITS)
+#define	BOOT_EEPROM_PAGE_OFFSET(x) ((x) & (BOOT_EEPROM_PAGE_SIZE - 1))
+
+		maxlen = BOOT_EEPROM_PAGE_SIZE - BOOT_EEPROM_PAGE_OFFSET(blk_off);
+		if (maxlen > I2C_RXTX_LEN)
+			maxlen = I2C_RXTX_LEN;
+
+		if (len > maxlen)
+			len = maxlen;
+
+		if (i2c_write (addr[0], offset, alen-1, buffer, len) != 0)
+			rcode = 1;
+
+		buffer += len;
+		offset += len;
+
+#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
+		udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#endif
+	}
+#if defined(CFG_EEPROM_WREN)
+	eeprom_write_enable(dev_addr, 0);
+#endif
+	return rcode;
+}
+
+
+int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
+{
+	unsigned end = offset + cnt;
+	unsigned blk_off;
+	int rcode = 0;
+
+	/* Read data until done or would cross a page boundary.
+	 * We must write the address again when changing pages
+	 * because the next page may be in a different device.
+	 */
+	while (offset < end) {
+		unsigned alen, len;
+		unsigned maxlen;
+		uchar addr[2];
+
+		blk_off = offset & 0xFF;	/* block offset */
+
+		addr[0] = offset >> 8;		/* block number */
+		addr[1] = blk_off;		/* block offset */
+		alen	= 2;
+
+		addr[0] |= dev_addr;		/* insert device address */
+
+		len = end - offset;
+
+		maxlen = 0x100 - blk_off;
+		if (maxlen > I2C_RXTX_LEN)
+			maxlen = I2C_RXTX_LEN;
+		if (len > maxlen)
+			len = maxlen;
+
+		if (i2c_read (addr[0], offset, alen-1, buffer, len) != 0)
+			rcode = 1;
+		buffer += len;
+		offset += len;
+	}
+
+	return rcode;
+}
+
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_BOARD_INIT)
+int usb_board_init(void)
+{
+	char *act = getenv("usbact");
+	int i;
+
+	if ((act == NULL || strcmp(act, "hostdev") == 0) &&
+	    !(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT))
+		/* enable power on USB socket */
+		out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_USB_PWR_N);
+
+	for (i=0; i<1000; i++)
+		udelay(1000);
+
+	return 0;
+}
+
+int usb_board_stop(void)
+{
+	/* disable power on USB socket */
+	out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_USB_PWR_N);
+	return 0;
+}
+
+int usb_board_init_fail(void)
+{
+	usb_board_stop();
+	return 0;
+}
+#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_BOARD_INIT) */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 val[4];
+	int rc;
+
+	ft_cpu_setup(blob, bd);
+
+	/* Fixup NOR mapping */
+	val[0] = 0;				/* chip select number */
+	val[1] = 0;				/* always 0 */
+	val[2] = gd->bd->bi_flashstart;
+	val[3] = gd->bd->bi_flashsize;
+	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+				  val, sizeof(val), 1);
+	if (rc)
+		printf("Unable to update property NOR mapping, err=%s\n",
+		       fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */

board/esd/pmc440/pmc440.h

@@ -0,0 +1,154 @@
+/*
+ * (C) Copyright 2007
+ * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __PMC440_H__
+#define __PMC440_H__
+
+
+/*-----------------------------------------------------------------------
+ * GPIOs
+ */
+#define GPIO1_INTA_FAKE           (0x80000000 >> (45-32)) /* GPIO45 OD */
+#define GPIO1_NONMONARCH          (0x80000000 >> (63-32)) /* GPIO63 I */
+#define GPIO1_PPC_EREADY          (0x80000000 >> (62-32)) /* GPIO62 I/O */
+#define GPIO1_M66EN               (0x80000000 >> (61-32)) /* GPIO61 I */
+#define GPIO1_POST_N              (0x80000000 >> (60-32)) /* GPIO60 O */
+#define GPIO1_IOEN_N              (0x80000000 >> (50-32)) /* GPIO50 O */
+#define GPIO1_HWID_MASK           (0xf0000000 >> (56-32)) /* GPIO56..59 I */
+
+#define GPIO1_USB_PWR_N           (0x80000000 >> (32-32)) /* GPIO32 I */
+#define GPIO0_LED_RUN_N           (0x80000000 >> 30)      /* GPIO30 O */
+#define GPIO0_EP_EEP              (0x80000000 >> 23)      /* GPIO23 O */
+#define GPIO0_USB_ID              (0x80000000 >> 21)      /* GPIO21 I */
+#define GPIO0_USB_PRSNT           (0x80000000 >> 20)      /* GPIO20 I */
+#define GPIO0_SELF_RST            (0x80000000 >> 6)       /* GPIO6  OD */
+
+/* FPGA programming pin configuration */
+#define GPIO1_FPGA_PRG            (0x80000000 >> (53-32)) /* FPGA program pin (ppc output) */
+#define GPIO1_FPGA_CLK            (0x80000000 >> (51-32)) /* FPGA clk pin (ppc output)     */
+#define GPIO1_FPGA_DATA           (0x80000000 >> (52-32)) /* FPGA data pin (ppc output)    */
+#define GPIO1_FPGA_DONE           (0x80000000 >> (55-32)) /* FPGA done pin (ppc input)     */
+#define GPIO1_FPGA_INIT           (0x80000000 >> (54-32)) /* FPGA init pin (ppc input)     */
+#define GPIO0_FPGA_FORCEINIT      (0x80000000 >> 27)      /* low: force INIT# low */
+
+/*-----------------------------------------------------------------------
+ * FPGA interface
+ */
+#define FPGA_BA CFG_FPGA_BASE0
+#define FPGA_OUT32(p,v) out_be32(((void*)(p)), (v))
+#define FPGA_IN32(p) in_be32((void*)(p))
+#define FPGA_SETBITS(p,v) out_be32(((void*)(p)), in_be32((void*)(p)) | (v))
+#define FPGA_CLRBITS(p,v) out_be32(((void*)(p)), in_be32((void*)(p)) & ~(v))
+
+struct pmc440_fifo_s {
+	u32 data;
+	u32 ctrl;
+};
+
+/* fifo ctrl register */
+#define FIFO_IE              (1 << 15)
+#define FIFO_OVERFLOW        (1 << 10)
+#define FIFO_EMPTY           (1 <<  9)
+#define FIFO_FULL            (1 <<  8)
+#define FIFO_LEVEL_MASK      0x000000ff
+
+#define FIFO_COUNT           4
+
+struct pmc440_fpga_s {
+	u32 ctrla;
+	u32 status;
+	u32 ctrlb;
+	u32 pad1[0x40 / sizeof(u32) - 3];
+	u32 irig_time;                  /* offset: 0x0040 */
+	u32 irig_tod;
+	u32 irig_cf;
+	u32 pad2;
+	u32 irig_rx_time;               /* offset: 0x0050 */
+	u32 pad3[3];
+	u32 hostctrl;                   /* offset: 0x0060 */
+	u32 pad4[0x20 / sizeof(u32) - 1];
+	struct pmc440_fifo_s fifo[FIFO_COUNT]; /* 0x0080..0x009f */
+};
+
+typedef struct pmc440_fpga_s pmc440_fpga_t;
+
+/* ctrl register */
+#define CTRL_HOST_IE         (1 <<  8)
+
+/* outputs */
+#define RESET_EN    (1 << 31)
+#define CLOCK_EN    (1 << 30)
+#define RESET_OUT   (1 << 19)
+#define CLOCK_OUT   (1 << 22)
+#define RESET_OUT   (1 << 19)
+#define IRIGB_R_OUT (1 << 14)
+
+
+/* status register */
+#define STATUS_VERSION_SHIFT 24
+#define STATUS_VERSION_MASK  0xff000000
+#define STATUS_HWREV_SHIFT   20
+#define STATUS_HWREV_MASK    0x00f00000
+
+#define STATUS_CAN_ISF       (1 << 11)
+#define STATUS_CSTM_ISF      (1 << 10)
+#define STATUS_FIFO_ISF      (1 <<  9)
+#define STATUS_HOST_ISF      (1 <<  8)
+
+
+/* inputs */
+#define RESET_IN    (1 << 0)
+#define CLOCK_IN    (1 << 1)
+#define IRIGB_R_IN  (1 << 5)
+
+
+/* hostctrl register */
+#define HOSTCTRL_PMCRSTOUT_GATE (1 <<  17)
+#define HOSTCTRL_PMCRSTOUT_FLAG (1 <<  16)
+#define HOSTCTRL_CSTM1IE_GATE (1 <<  7)
+#define HOSTCTRL_CSTM1IW_FLAG (1 <<  6)
+#define HOSTCTRL_CSTM0IE_GATE (1 <<  5)
+#define HOSTCTRL_CSTM0IW_FLAG (1 <<  4)
+#define HOSTCTRL_FIFOIE_GATE (1 <<  3)
+#define HOSTCTRL_FIFOIE_FLAG (1 <<  2)
+#define HOSTCTRL_HCINT_GATE  (1 <<  1)
+#define HOSTCTRL_HCINT_FLAG  (1 <<  0)
+
+#define NGCC_CTRL_BASE         (CFG_FPGA_BASE0 + 0x80000)
+#define NGCC_CTRL_FPGARST_N    (1 <<  2)
+
+/*-----------------------------------------------------------------------
+ * FPGA to PPC interrupt
+ */
+#define IRQ0_FPGA            (32+28) /* UIC1 - FPGA internal */
+#define IRQ1_FPGA            (32+30) /* UIC1 - custom module */
+#define IRQ2_FPGA            (64+ 3) /* UIC2 - custom module / CAN */
+#define IRQ_ETH0             (64+ 4) /* UIC2 */
+#define IRQ_ETH1             (   27) /* UIC0 */
+#define IRQ_RTC              (64+ 0) /* UIC2 */
+#define IRQ_PCIA             (64+ 1) /* UIC2 */
+#define IRQ_PCIB             (32+18) /* UIC1 */
+#define IRQ_PCIC             (32+19) /* UIC1 */
+#define IRQ_PCID             (32+20) /* UIC1 */
+
+#endif /* __PMC440_H__ */

board/esd/pmc440/sdram.c

@@ -0,0 +1,442 @@
+/*
+ * (C) Copyright 2006
+ * Sylvie Gohl,             AMCC/IBM, gohl.sylvie@fr.ibm.com
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Thierry Roman,           AMCC/IBM, thierry_roman@fr.ibm.com
+ * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
+ * Robert Snyder,           AMCC/IBM, rob.snyder@fr.ibm.com
+ *
+ * (C) Copyright 2006-2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* define DEBUG for debug output */
+#undef DEBUG
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <ppc440.h>
+
+#include "sdram.h"
+
+#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) || \
+	defined(CONFIG_DDR_DATA_EYE)
+/*-----------------------------------------------------------------------------+
+ * wait_for_dlllock.
+ +----------------------------------------------------------------------------*/
+static int wait_for_dlllock(void)
+{
+	unsigned long val;
+	int wait = 0;
+
+	/* -----------------------------------------------------------+
+	 * Wait for the DCC master delay line to finish calibration
+	 * ----------------------------------------------------------*/
+	mtdcr(ddrcfga, DDR0_17);
+	val = DDR0_17_DLLLOCKREG_UNLOCKED;
+
+	while (wait != 0xffff) {
+		val = mfdcr(ddrcfgd);
+		if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED)
+			/* dlllockreg bit on */
+			return 0;
+		else
+			wait++;
+	}
+	debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
+	debug("Waiting for dlllockreg bit to raise\n");
+
+	return -1;
+}
+#endif
+
+#if defined(CONFIG_DDR_DATA_EYE)
+/*-----------------------------------------------------------------------------+
+ * wait_for_dram_init_complete.
+ +----------------------------------------------------------------------------*/
+int wait_for_dram_init_complete(void)
+{
+	unsigned long val;
+	int wait = 0;
+
+	/* --------------------------------------------------------------+
+	 * Wait for 'DRAM initialization complete' bit in status register
+	 * -------------------------------------------------------------*/
+	mtdcr(ddrcfga, DDR0_00);
+
+	while (wait != 0xffff) {
+		val = mfdcr(ddrcfgd);
+		if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6)
+			/* 'DRAM initialization complete' bit */
+			return 0;
+		else
+			wait++;
+	}
+
+	debug("DRAM initialization complete bit in status register did not rise\n");
+
+	return -1;
+}
+
+#define NUM_TRIES 64
+#define NUM_READS 10
+
+/*-----------------------------------------------------------------------------+
+ * denali_core_search_data_eye.
+ +----------------------------------------------------------------------------*/
+void denali_core_search_data_eye(unsigned long memory_size)
+{
+	int k, j;
+	u32 val;
+	u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
+	u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
+	u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
+	u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
+	volatile u32 *ram_pointer;
+	u32 test[NUM_TRIES] = {
+		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
+
+	ram_pointer = (volatile u32 *)(CFG_SDRAM_BASE);
+
+	for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
+		/*for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) {*/
+
+		/* -----------------------------------------------------------+
+		 * De-assert 'start' parameter.
+		 * ----------------------------------------------------------*/
+		mtdcr(ddrcfga, DDR0_02);
+		val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+		mtdcr(ddrcfgd, val);
+
+		/* -----------------------------------------------------------+
+		 * Set 'wr_dqs_shift'
+		 * ----------------------------------------------------------*/
+		mtdcr(ddrcfga, DDR0_09);
+		val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
+			| DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
+		mtdcr(ddrcfgd, val);
+
+		/* -----------------------------------------------------------+
+		 * Set 'dqs_out_shift' = wr_dqs_shift + 32
+		 * ----------------------------------------------------------*/
+		dqs_out_shift = wr_dqs_shift + 32;
+		mtdcr(ddrcfga, DDR0_22);
+		val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
+			| DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
+		mtdcr(ddrcfgd, val);
+
+		passing_cases = 0;
+
+		for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64; dll_dqs_delay_X++) {
+			/*for (dll_dqs_delay_X=1; dll_dqs_delay_X<128; dll_dqs_delay_X++) {*/
+			/* -----------------------------------------------------------+
+			 * Set 'dll_dqs_delay_X'.
+			 * ----------------------------------------------------------*/
+			/* dll_dqs_delay_0 */
+			mtdcr(ddrcfga, DDR0_17);
+			val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
+				| DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
+			mtdcr(ddrcfgd, val);
+			/* dll_dqs_delay_1 to dll_dqs_delay_4 */
+			mtdcr(ddrcfga, DDR0_18);
+			val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
+				| DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
+				| DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
+				| DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
+				| DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
+			mtdcr(ddrcfgd, val);
+			/* dll_dqs_delay_5 to dll_dqs_delay_8 */
+			mtdcr(ddrcfga, DDR0_19);
+			val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
+				| DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
+				| DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
+				| DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
+				| DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
+			mtdcr(ddrcfgd, val);
+
+			ppcMsync();
+			ppcMbar();
+
+			/* -----------------------------------------------------------+
+			 * Assert 'start' parameter.
+			 * ----------------------------------------------------------*/
+			mtdcr(ddrcfga, DDR0_02);
+			val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
+			mtdcr(ddrcfgd, val);
+
+			ppcMsync();
+			ppcMbar();
+
+			/* -----------------------------------------------------------+
+			 * Wait for the DCC master delay line to finish calibration
+			 * ----------------------------------------------------------*/
+			if (wait_for_dlllock() != 0) {
+				printf("dlllock did not occur !!!\n");
+				printf("denali_core_search_data_eye!!!\n");
+				printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
+				       wr_dqs_shift, dll_dqs_delay_X);
+				hang();
+			}
+			ppcMsync();
+			ppcMbar();
+
+			if (wait_for_dram_init_complete() != 0) {
+				printf("dram init complete did not occur !!!\n");
+				printf("denali_core_search_data_eye!!!\n");
+				printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
+				       wr_dqs_shift, dll_dqs_delay_X);
+				hang();
+			}
+			udelay(100);  /* wait 100us to ensure init is really completed !!! */
+
+			/* write values */
+			for (j=0; j<NUM_TRIES; j++) {
+				ram_pointer[j] = test[j];
+
+				/* clear any cache at ram location */
+				__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+			}
+
+			/* read values back */
+			for (j=0; j<NUM_TRIES; j++) {
+				for (k=0; k<NUM_READS; k++) {
+					/* clear any cache at ram location */
+					__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+
+					if (ram_pointer[j] != test[j])
+						break;
+				}
+
+				/* read error */
+				if (k != NUM_READS)
+					break;
+			}
+
+			/* See if the dll_dqs_delay_X value passed.*/
+			if (j < NUM_TRIES) {
+				/* Failed */
+				passing_cases = 0;
+				/* break; */
+			} else {
+				/* Passed */
+				if (passing_cases == 0)
+					dll_dqs_delay_X_sw_val = dll_dqs_delay_X;
+				passing_cases++;
+				if (passing_cases >= max_passing_cases) {
+					max_passing_cases = passing_cases;
+					wr_dqs_shift_with_max_passing_cases = wr_dqs_shift;
+					dll_dqs_delay_X_start_window = dll_dqs_delay_X_sw_val;
+					dll_dqs_delay_X_end_window = dll_dqs_delay_X;
+				}
+			}
+
+			/* -----------------------------------------------------------+
+			 * De-assert 'start' parameter.
+			 * ----------------------------------------------------------*/
+			mtdcr(ddrcfga, DDR0_02);
+			val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+			mtdcr(ddrcfgd, val);
+
+		} /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
+
+	} /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
+
+	/* -----------------------------------------------------------+
+	 * Largest passing window is now detected.
+	 * ----------------------------------------------------------*/
+
+	/* Compute dll_dqs_delay_X value */
+	dll_dqs_delay_X = (dll_dqs_delay_X_end_window + dll_dqs_delay_X_start_window) / 2;
+	wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
+
+	debug("DQS calibration - Window detected:\n");
+	debug("max_passing_cases = %d\n", max_passing_cases);
+	debug("wr_dqs_shift      = %d\n", wr_dqs_shift);
+	debug("dll_dqs_delay_X   = %d\n", dll_dqs_delay_X);
+	debug("dll_dqs_delay_X window = %d - %d\n",
+	       dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
+
+	/* -----------------------------------------------------------+
+	 * De-assert 'start' parameter.
+	 * ----------------------------------------------------------*/
+	mtdcr(ddrcfga, DDR0_02);
+	val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+	mtdcr(ddrcfgd, val);
+
+	/* -----------------------------------------------------------+
+	 * Set 'wr_dqs_shift'
+	 * ----------------------------------------------------------*/
+	mtdcr(ddrcfga, DDR0_09);
+	val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
+		| DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_09=0x%08lx\n", val);
+
+	/* -----------------------------------------------------------+
+	 * Set 'dqs_out_shift' = wr_dqs_shift + 32
+	 * ----------------------------------------------------------*/
+	dqs_out_shift = wr_dqs_shift + 32;
+	mtdcr(ddrcfga, DDR0_22);
+	val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
+		| DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_22=0x%08lx\n", val);
+
+	/* -----------------------------------------------------------+
+	 * Set 'dll_dqs_delay_X'.
+	 * ----------------------------------------------------------*/
+	/* dll_dqs_delay_0 */
+	mtdcr(ddrcfga, DDR0_17);
+	val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
+		| DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_17=0x%08lx\n", val);
+
+	/* dll_dqs_delay_1 to dll_dqs_delay_4 */
+	mtdcr(ddrcfga, DDR0_18);
+	val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
+		| DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
+		| DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
+		| DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
+		| DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_18=0x%08lx\n", val);
+
+	/* dll_dqs_delay_5 to dll_dqs_delay_8 */
+	mtdcr(ddrcfga, DDR0_19);
+	val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
+		| DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
+		| DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
+		| DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
+		| DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_19=0x%08lx\n", val);
+
+	/* -----------------------------------------------------------+
+	 * Assert 'start' parameter.
+	 * ----------------------------------------------------------*/
+	mtdcr(ddrcfga, DDR0_02);
+	val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
+	mtdcr(ddrcfgd, val);
+
+	ppcMsync();
+	ppcMbar();
+
+	/* -----------------------------------------------------------+
+	 * Wait for the DCC master delay line to finish calibration
+	 * ----------------------------------------------------------*/
+	if (wait_for_dlllock() != 0) {
+		printf("dlllock did not occur !!!\n");
+		hang();
+	}
+	ppcMsync();
+	ppcMbar();
+
+	if (wait_for_dram_init_complete() != 0) {
+		printf("dram init complete did not occur !!!\n");
+		hang();
+	}
+	udelay(100);  /* wait 100us to ensure init is really completed !!! */
+}
+#endif /* CONFIG_DDR_DATA_EYE */
+
+#if defined(CONFIG_NAND_SPL)
+/* Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
+ * for the 4k NAND boot image so define bus_frequency to 133MHz here
+ * which is save for the refresh counter setup.
+ */
+#define get_bus_freq(val)	133000000
+#endif
+
+/*************************************************************************
+ *
+ * initdram -- 440EPx's DDR controller is a DENALI Core
+ *
+ ************************************************************************/
+long int initdram (int board_type)
+{
+#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+#if !defined(CONFIG_NAND_SPL)
+	ulong speed = get_bus_freq(0);
+#else
+	ulong speed = 133333333;	/* 133MHz is on the safe side	*/
+#endif
+
+	mtsdram(DDR0_02, 0x00000000);
+
+	mtsdram(DDR0_00, 0x0000190A);
+	mtsdram(DDR0_01, 0x01000000);
+	mtsdram(DDR0_03, 0x02030602);
+	mtsdram(DDR0_04, 0x0A020200);
+	mtsdram(DDR0_05, 0x02020308);
+	mtsdram(DDR0_06, 0x0102C812);
+	mtsdram(DDR0_07, 0x000D0100);
+	mtsdram(DDR0_08, 0x02430001);
+	mtsdram(DDR0_09, 0x00011D5F);
+	mtsdram(DDR0_10, 0x00000300);
+	mtsdram(DDR0_11, 0x0027C800);
+	mtsdram(DDR0_12, 0x00000003);
+	mtsdram(DDR0_14, 0x00000000);
+	mtsdram(DDR0_17, 0x19000000);
+	mtsdram(DDR0_18, 0x19191919);
+	mtsdram(DDR0_19, 0x19191919);
+	mtsdram(DDR0_20, 0x0B0B0B0B);
+	mtsdram(DDR0_21, 0x0B0B0B0B);
+	mtsdram(DDR0_22, 0x00267F0B);
+	mtsdram(DDR0_23, 0x00000000);
+	mtsdram(DDR0_24, 0x01010002);
+	if (speed > 133333334)
+		mtsdram(DDR0_26, 0x5B26050C);
+	else
+		mtsdram(DDR0_26, 0x5B260408);
+	mtsdram(DDR0_27, 0x0000682B);
+	mtsdram(DDR0_28, 0x00000000);
+	mtsdram(DDR0_31, 0x00000000);
+	mtsdram(DDR0_42, 0x01000006);
+	mtsdram(DDR0_43, 0x030A0200);
+	mtsdram(DDR0_44, 0x00000003);
+	mtsdram(DDR0_02, 0x00000001);
+
+	wait_for_dlllock();
+#endif /* #ifndef CONFIG_NAND_U_BOOT */
+
+#ifdef CONFIG_DDR_DATA_EYE
+	/* -----------------------------------------------------------+
+	 * Perform data eye search if requested.
+	 * ----------------------------------------------------------*/
+	denali_core_search_data_eye(CFG_MBYTES_SDRAM << 20);
+#endif
+
+	return (CFG_MBYTES_SDRAM << 20);
+}

board/esd/pmc440/sdram.h

@@ -0,0 +1,505 @@
+/*
+ * (C) Copyright 2006
+ * Sylvie Gohl,             AMCC/IBM, gohl.sylvie@fr.ibm.com
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Thierry Roman,           AMCC/IBM, thierry_roman@fr.ibm.com
+ * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
+ * Robert Snyder,           AMCC/IBM, rob.snyder@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SPD_SDRAM_DENALI_H_
+#define _SPD_SDRAM_DENALI_H_
+
+#define ppcMsync	sync
+#define ppcMbar		eieio
+
+/* General definitions */
+#define MAX_SPD_BYTE        128         /* highest SPD byte # to read */
+#define DENALI_REG_NUMBER   45          /* 45 Regs in PPC440EPx Denali Core */
+#define SUPPORTED_DIMMS_NB  7           /* Number of supported DIMM modules types */
+#define SDRAM_NONE          0           /* No DIMM detected in Slot */
+#define MAXRANKS            2           /* 2 ranks maximum */
+
+/* Supported PLB Frequencies */
+#define PLB_FREQ_133MHZ     133333333
+#define PLB_FREQ_152MHZ     152000000
+#define PLB_FREQ_160MHZ     160000000
+#define PLB_FREQ_166MHZ     166666666
+
+/* Denali Core Registers */
+#define SDRAM_DCR_BASE 0x10
+
+#define DDR_DCR_BASE 0x10
+#define ddrcfga  (DDR_DCR_BASE+0x0)   /* DDR configuration address reg */
+#define ddrcfgd  (DDR_DCR_BASE+0x1)   /* DDR configuration data reg    */
+
+/*-----------------------------------------------------------------------------+
+  | Values for ddrcfga register - indirect addressing of these regs
+  +-----------------------------------------------------------------------------*/
+
+#define DDR0_00                         0x00
+#define DDR0_00_INT_ACK_MASK              0x7F000000 /* Write only */
+#define DDR0_00_INT_ACK_ALL               0x7F000000
+#define DDR0_00_INT_ACK_ENCODE(n)           ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_00_INT_ACK_DECODE(n)           ((((unsigned long)(n))>>24)&0x7F)
+/* Status */
+#define DDR0_00_INT_STATUS_MASK           0x00FF0000 /* Read only */
+/* Bit0. A single access outside the defined PHYSICAL memory space detected. */
+#define DDR0_00_INT_STATUS_BIT0           0x00010000
+/* Bit1. Multiple accesses outside the defined PHYSICAL memory space detected. */
+#define DDR0_00_INT_STATUS_BIT1           0x00020000
+/* Bit2. Single correctable ECC event detected */
+#define DDR0_00_INT_STATUS_BIT2           0x00040000
+/* Bit3. Multiple correctable ECC events detected. */
+#define DDR0_00_INT_STATUS_BIT3           0x00080000
+/* Bit4. Single uncorrectable ECC event detected. */
+#define DDR0_00_INT_STATUS_BIT4           0x00100000
+/* Bit5. Multiple uncorrectable ECC events detected. */
+#define DDR0_00_INT_STATUS_BIT5           0x00200000
+/* Bit6. DRAM initialization complete. */
+#define DDR0_00_INT_STATUS_BIT6           0x00400000
+/* Bit7. Logical OR of all lower bits. */
+#define DDR0_00_INT_STATUS_BIT7           0x00800000
+
+#define DDR0_00_INT_STATUS_ENCODE(n)        ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_00_INT_STATUS_DECODE(n)        ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_00_DLL_INCREMENT_MASK        0x00007F00
+#define DDR0_00_DLL_INCREMENT_ENCODE(n)     ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_00_DLL_INCREMENT_DECODE(n)     ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_00_DLL_START_POINT_MASK      0x0000007F
+#define DDR0_00_DLL_START_POINT_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_00_DLL_START_POINT_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
+
+
+#define DDR0_01                         0x01
+#define DDR0_01_PLB0_DB_CS_LOWER_MASK     0x1F000000
+#define DDR0_01_PLB0_DB_CS_LOWER_ENCODE(n)  ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_01_PLB0_DB_CS_LOWER_DECODE(n)  ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_01_PLB0_DB_CS_UPPER_MASK     0x001F0000
+#define DDR0_01_PLB0_DB_CS_UPPER_ENCODE(n)  ((((unsigned long)(n))&0x1F)<<16)
+#define DDR0_01_PLB0_DB_CS_UPPER_DECODE(n)  ((((unsigned long)(n))>>16)&0x1F)
+#define DDR0_01_OUT_OF_RANGE_TYPE_MASK    0x00000700 /* Read only */
+#define DDR0_01_OUT_OF_RANGE_TYPE_ENCODE(n)               ((((unsigned long)(n))&0x7)<<8)
+#define DDR0_01_OUT_OF_RANGE_TYPE_DECODE(n)               ((((unsigned long)(n))>>8)&0x7)
+#define DDR0_01_INT_MASK_MASK             0x000000FF
+#define DDR0_01_INT_MASK_ENCODE(n)          ((((unsigned long)(n))&0xFF)<<0)
+#define DDR0_01_INT_MASK_DECODE(n)          ((((unsigned long)(n))>>0)&0xFF)
+#define DDR0_01_INT_MASK_ALL_ON           0x000000FF
+#define DDR0_01_INT_MASK_ALL_OFF          0x00000000
+
+#define DDR0_02                         0x02
+#define DDR0_02_MAX_CS_REG_MASK           0x02000000 /* Read only */
+#define DDR0_02_MAX_CS_REG_ENCODE(n)        ((((unsigned long)(n))&0x2)<<24)
+#define DDR0_02_MAX_CS_REG_DECODE(n)        ((((unsigned long)(n))>>24)&0x2)
+#define DDR0_02_MAX_COL_REG_MASK          0x000F0000 /* Read only */
+#define DDR0_02_MAX_COL_REG_ENCODE(n)       ((((unsigned long)(n))&0xF)<<16)
+#define DDR0_02_MAX_COL_REG_DECODE(n)       ((((unsigned long)(n))>>16)&0xF)
+#define DDR0_02_MAX_ROW_REG_MASK          0x00000F00 /* Read only */
+#define DDR0_02_MAX_ROW_REG_ENCODE(n)       ((((unsigned long)(n))&0xF)<<8)
+#define DDR0_02_MAX_ROW_REG_DECODE(n)       ((((unsigned long)(n))>>8)&0xF)
+#define DDR0_02_START_MASK                0x00000001
+#define DDR0_02_START_ENCODE(n)             ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_02_START_DECODE(n)             ((((unsigned long)(n))>>0)&0x1)
+#define DDR0_02_START_OFF                 0x00000000
+#define DDR0_02_START_ON                  0x00000001
+
+#define DDR0_03                         0x03
+#define DDR0_03_BSTLEN_MASK               0x07000000
+#define DDR0_03_BSTLEN_ENCODE(n)            ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_03_BSTLEN_DECODE(n)            ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_03_CASLAT_MASK               0x00070000
+#define DDR0_03_CASLAT_ENCODE(n)            ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_03_CASLAT_DECODE(n)            ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_03_CASLAT_LIN_MASK           0x00000F00
+#define DDR0_03_CASLAT_LIN_ENCODE(n)        ((((unsigned long)(n))&0xF)<<8)
+#define DDR0_03_CASLAT_LIN_DECODE(n)        ((((unsigned long)(n))>>8)&0xF)
+#define DDR0_03_INITAREF_MASK             0x0000000F
+#define DDR0_03_INITAREF_ENCODE(n)          ((((unsigned long)(n))&0xF)<<0)
+#define DDR0_03_INITAREF_DECODE(n)          ((((unsigned long)(n))>>0)&0xF)
+
+#define DDR0_04                         0x04
+#define DDR0_04_TRC_MASK                  0x1F000000
+#define DDR0_04_TRC_ENCODE(n)               ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_04_TRC_DECODE(n)               ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_04_TRRD_MASK                 0x00070000
+#define DDR0_04_TRRD_ENCODE(n)              ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_04_TRRD_DECODE(n)              ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_04_TRTP_MASK                 0x00000700
+#define DDR0_04_TRTP_ENCODE(n)              ((((unsigned long)(n))&0x7)<<8)
+#define DDR0_04_TRTP_DECODE(n)              ((((unsigned long)(n))>>8)&0x7)
+
+#define DDR0_05                         0x05
+#define DDR0_05_TMRD_MASK                 0x1F000000
+#define DDR0_05_TMRD_ENCODE(n)              ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_05_TMRD_DECODE(n)              ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_05_TEMRS_MASK                0x00070000
+#define DDR0_05_TEMRS_ENCODE(n)             ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_05_TEMRS_DECODE(n)             ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_05_TRP_MASK                  0x00000F00
+#define DDR0_05_TRP_ENCODE(n)               ((((unsigned long)(n))&0xF)<<8)
+#define DDR0_05_TRP_DECODE(n)               ((((unsigned long)(n))>>8)&0xF)
+#define DDR0_05_TRAS_MIN_MASK             0x000000FF
+#define DDR0_05_TRAS_MIN_ENCODE(n)          ((((unsigned long)(n))&0xFF)<<0)
+#define DDR0_05_TRAS_MIN_DECODE(n)          ((((unsigned long)(n))>>0)&0xFF)
+
+#define DDR0_06                         0x06
+#define DDR0_06_WRITEINTERP_MASK          0x01000000
+#define DDR0_06_WRITEINTERP_ENCODE(n)       ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_06_WRITEINTERP_DECODE(n)       ((((unsigned long)(n))>>24)&0x1)
+#define DDR0_06_TWTR_MASK                 0x00070000
+#define DDR0_06_TWTR_ENCODE(n)              ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_06_TWTR_DECODE(n)              ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_06_TDLL_MASK                 0x0000FF00
+#define DDR0_06_TDLL_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<8)
+#define DDR0_06_TDLL_DECODE(n)              ((((unsigned long)(n))>>8)&0xFF)
+#define DDR0_06_TRFC_MASK                 0x0000007F
+#define DDR0_06_TRFC_ENCODE(n)              ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_06_TRFC_DECODE(n)              ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_07                         0x07
+#define DDR0_07_NO_CMD_INIT_MASK          0x01000000
+#define DDR0_07_NO_CMD_INIT_ENCODE(n)       ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_07_NO_CMD_INIT_DECODE(n)       ((((unsigned long)(n))>>24)&0x1)
+#define DDR0_07_TFAW_MASK                 0x001F0000
+#define DDR0_07_TFAW_ENCODE(n)              ((((unsigned long)(n))&0x1F)<<16)
+#define DDR0_07_TFAW_DECODE(n)              ((((unsigned long)(n))>>16)&0x1F)
+#define DDR0_07_AUTO_REFRESH_MODE_MASK    0x00000100
+#define DDR0_07_AUTO_REFRESH_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
+#define DDR0_07_AUTO_REFRESH_MODE_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
+#define DDR0_07_AREFRESH_MASK             0x00000001
+#define DDR0_07_AREFRESH_ENCODE(n)          ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_07_AREFRESH_DECODE(n)          ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_08                         0x08
+#define DDR0_08_WRLAT_MASK                0x07000000
+#define DDR0_08_WRLAT_ENCODE(n)             ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_08_WRLAT_DECODE(n)             ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_08_TCPD_MASK                 0x00FF0000
+#define DDR0_08_TCPD_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_08_TCPD_DECODE(n)              ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_08_DQS_N_EN_MASK             0x00000100
+#define DDR0_08_DQS_N_EN_ENCODE(n)          ((((unsigned long)(n))&0x1)<<8)
+#define DDR0_08_DQS_N_EN_DECODE(n)          ((((unsigned long)(n))>>8)&0x1)
+#define DDR0_08_DDRII_SDRAM_MODE_MASK     0x00000001
+#define DDR0_08_DDRII_ENCODE(n)             ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_08_DDRII_DECODE(n)             ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_09                         0x09
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_MASK  0x1F000000
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_09_RTT_0_MASK                0x00030000
+#define DDR0_09_RTT_0_ENCODE(n)             ((((unsigned long)(n))&0x3)<<16)
+#define DDR0_09_RTT_0_DECODE(n)             ((((unsigned long)(n))>>16)&0x3)
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_MASK  0x00007F00
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_09_WR_DQS_SHIFT_MASK         0x0000007F
+#define DDR0_09_WR_DQS_SHIFT_ENCODE(n)      ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_09_WR_DQS_SHIFT_DECODE(n)      ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_10                         0x0A
+#define DDR0_10_WRITE_MODEREG_MASK        0x00010000 /* Write only */
+#define DDR0_10_WRITE_MODEREG_ENCODE(n)     ((((unsigned long)(n))&0x1)<<16)
+#define DDR0_10_WRITE_MODEREG_DECODE(n)     ((((unsigned long)(n))>>16)&0x1)
+#define DDR0_10_CS_MAP_MASK               0x00000300
+#define DDR0_10_CS_MAP_NO_MEM             0x00000000
+#define DDR0_10_CS_MAP_RANK0_INSTALLED    0x00000100
+#define DDR0_10_CS_MAP_RANK1_INSTALLED    0x00000200
+#define DDR0_10_CS_MAP_ENCODE(n)            ((((unsigned long)(n))&0x3)<<8)
+#define DDR0_10_CS_MAP_DECODE(n)            ((((unsigned long)(n))>>8)&0x3)
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_MASK  0x0000001F
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<0)
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x1F)
+
+#define DDR0_11                         0x0B
+#define DDR0_11_SREFRESH_MASK             0x01000000
+#define DDR0_11_SREFRESH_ENCODE(n)          ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_11_SREFRESH_DECODE(n)          ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_11_TXSNR_MASK                0x00FF0000
+#define DDR0_11_TXSNR_ENCODE(n)             ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_11_TXSNR_DECODE(n)             ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_11_TXSR_MASK                 0x0000FF00
+#define DDR0_11_TXSR_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<8)
+#define DDR0_11_TXSR_DECODE(n)              ((((unsigned long)(n))>>8)&0xFF)
+
+#define DDR0_12                         0x0C
+#define DDR0_12_TCKE_MASK                 0x0000007
+#define DDR0_12_TCKE_ENCODE(n)              ((((unsigned long)(n))&0x7)<<0)
+#define DDR0_12_TCKE_DECODE(n)              ((((unsigned long)(n))>>0)&0x7)
+
+#define DDR0_13                         0x0D
+
+#define DDR0_14                         0x0E
+#define DDR0_14_DLL_BYPASS_MODE_MASK      0x01000000
+#define DDR0_14_DLL_BYPASS_MODE_ENCODE(n)   ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_14_DLL_BYPASS_MODE_DECODE(n)   ((((unsigned long)(n))>>24)&0x1)
+#define DDR0_14_REDUC_MASK                0x00010000
+#define DDR0_14_REDUC_64BITS              0x00000000
+#define DDR0_14_REDUC_32BITS              0x00010000
+#define DDR0_14_REDUC_ENCODE(n)             ((((unsigned long)(n))&0x1)<<16)
+#define DDR0_14_REDUC_DECODE(n)             ((((unsigned long)(n))>>16)&0x1)
+#define DDR0_14_REG_DIMM_ENABLE_MASK      0x00000100
+#define DDR0_14_REG_DIMM_ENABLE_ENCODE(n)   ((((unsigned long)(n))&0x1)<<8)
+#define DDR0_14_REG_DIMM_ENABLE_DECODE(n)   ((((unsigned long)(n))>>8)&0x1)
+
+#define DDR0_15                         0x0F
+
+#define DDR0_16                         0x10
+
+#define DDR0_17                         0x11
+#define DDR0_17_DLL_DQS_DELAY_0_MASK      0x7F000000
+#define DDR0_17_DLL_DQS_DELAY_0_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_17_DLL_DQS_DELAY_0_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_17_DLLLOCKREG_MASK           0x00010000 /* Read only */
+#define DDR0_17_DLLLOCKREG_LOCKED         0x00010000
+#define DDR0_17_DLLLOCKREG_UNLOCKED       0x00000000
+#define DDR0_17_DLLLOCKREG_ENCODE(n)        ((((unsigned long)(n))&0x1)<<16)
+#define DDR0_17_DLLLOCKREG_DECODE(n)        ((((unsigned long)(n))>>16)&0x1)
+#define DDR0_17_DLL_LOCK_MASK             0x00007F00 /* Read only */
+#define DDR0_17_DLL_LOCK_ENCODE(n)          ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_17_DLL_LOCK_DECODE(n)          ((((unsigned long)(n))>>8)&0x7F)
+
+#define DDR0_18                         0x12
+#define DDR0_18_DLL_DQS_DELAY_X_MASK      0x7F7F7F7F
+#define DDR0_18_DLL_DQS_DELAY_4_MASK      0x7F000000
+#define DDR0_18_DLL_DQS_DELAY_4_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_18_DLL_DQS_DELAY_4_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_3_MASK      0x007F0000
+#define DDR0_18_DLL_DQS_DELAY_3_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_18_DLL_DQS_DELAY_3_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_2_MASK      0x00007F00
+#define DDR0_18_DLL_DQS_DELAY_2_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_18_DLL_DQS_DELAY_2_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_1_MASK      0x0000007F
+#define DDR0_18_DLL_DQS_DELAY_1_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_18_DLL_DQS_DELAY_1_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_19                         0x13
+#define DDR0_19_DLL_DQS_DELAY_X_MASK      0x7F7F7F7F
+#define DDR0_19_DLL_DQS_DELAY_8_MASK      0x7F000000
+#define DDR0_19_DLL_DQS_DELAY_8_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_19_DLL_DQS_DELAY_8_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_7_MASK      0x007F0000
+#define DDR0_19_DLL_DQS_DELAY_7_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_19_DLL_DQS_DELAY_7_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_6_MASK      0x00007F00
+#define DDR0_19_DLL_DQS_DELAY_6_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_19_DLL_DQS_DELAY_6_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_5_MASK      0x0000007F
+#define DDR0_19_DLL_DQS_DELAY_5_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_19_DLL_DQS_DELAY_5_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_20                         0x14
+#define DDR0_20_DLL_DQS_BYPASS_3_MASK      0x7F000000
+#define DDR0_20_DLL_DQS_BYPASS_3_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_20_DLL_DQS_BYPASS_3_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_2_MASK      0x007F0000
+#define DDR0_20_DLL_DQS_BYPASS_2_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_20_DLL_DQS_BYPASS_2_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_1_MASK      0x00007F00
+#define DDR0_20_DLL_DQS_BYPASS_1_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_20_DLL_DQS_BYPASS_1_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_0_MASK      0x0000007F
+#define DDR0_20_DLL_DQS_BYPASS_0_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_20_DLL_DQS_BYPASS_0_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_21                         0x15
+#define DDR0_21_DLL_DQS_BYPASS_7_MASK      0x7F000000
+#define DDR0_21_DLL_DQS_BYPASS_7_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_21_DLL_DQS_BYPASS_7_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_6_MASK      0x007F0000
+#define DDR0_21_DLL_DQS_BYPASS_6_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_21_DLL_DQS_BYPASS_6_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_5_MASK      0x00007F00
+#define DDR0_21_DLL_DQS_BYPASS_5_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_21_DLL_DQS_BYPASS_5_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_4_MASK      0x0000007F
+#define DDR0_21_DLL_DQS_BYPASS_4_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_21_DLL_DQS_BYPASS_4_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_22                         0x16
+/* ECC */
+#define DDR0_22_CTRL_RAW_MASK             0x03000000
+#define DDR0_22_CTRL_RAW_ECC_DISABLE      0x00000000 /* ECC not being used */
+#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY   0x01000000 /* ECC checking is on, but no attempts to correct*/
+#define DDR0_22_CTRL_RAW_NO_ECC_RAM       0x02000000 /* No ECC RAM storage available */
+#define DDR0_22_CTRL_RAW_ECC_ENABLE       0x03000000 /* ECC checking and correcting on */
+#define DDR0_22_CTRL_RAW_ENCODE(n)          ((((unsigned long)(n))&0x3)<<24)
+#define DDR0_22_CTRL_RAW_DECODE(n)          ((((unsigned long)(n))>>24)&0x3)
+
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_MASK 0x007F0000
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_22_DQS_OUT_SHIFT_MASK        0x00007F00
+#define DDR0_22_DQS_OUT_SHIFT_ENCODE(n)     ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_22_DQS_OUT_SHIFT_DECODE(n)     ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_22_DLL_DQS_BYPASS_8_MASK     0x0000007F
+#define DDR0_22_DLL_DQS_BYPASS_8_ENCODE(n)  ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_22_DLL_DQS_BYPASS_8_DECODE(n)  ((((unsigned long)(n))>>0)&0x7F)
+
+
+#define DDR0_23                         0x17
+#define DDR0_23_ODT_RD_MAP_CS0_MASK       0x03000000
+#define DDR0_23_ODT_RD_MAP_CS0_ENCODE(n)   ((((unsigned long)(n))&0x3)<<24)
+#define DDR0_23_ODT_RD_MAP_CS0_DECODE(n)   ((((unsigned long)(n))>>24)&0x3)
+#define DDR0_23_ECC_C_SYND_MASK           0x00FF0000 /* Read only */
+#define DDR0_23_ECC_C_SYND_ENCODE(n)        ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_23_ECC_C_SYND_DECODE(n)        ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_23_ECC_U_SYND_MASK           0x0000FF00 /* Read only */
+#define DDR0_23_ECC_U_SYND_ENCODE(n)        ((((unsigned long)(n))&0xFF)<<8)
+#define DDR0_23_ECC_U_SYND_DECODE(n)        ((((unsigned long)(n))>>8)&0xFF)
+#define DDR0_23_FWC_MASK                  0x00000001 /* Write only */
+#define DDR0_23_FWC_ENCODE(n)               ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_23_FWC_DECODE(n)               ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_24                         0x18
+#define DDR0_24_RTT_PAD_TERMINATION_MASK  0x03000000
+#define DDR0_24_RTT_PAD_TERMINATION_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
+#define DDR0_24_RTT_PAD_TERMINATION_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
+#define DDR0_24_ODT_WR_MAP_CS1_MASK       0x00030000
+#define DDR0_24_ODT_WR_MAP_CS1_ENCODE(n)    ((((unsigned long)(n))&0x3)<<16)
+#define DDR0_24_ODT_WR_MAP_CS1_DECODE(n)    ((((unsigned long)(n))>>16)&0x3)
+#define DDR0_24_ODT_RD_MAP_CS1_MASK       0x00000300
+#define DDR0_24_ODT_RD_MAP_CS1_ENCODE(n)    ((((unsigned long)(n))&0x3)<<8)
+#define DDR0_24_ODT_RD_MAP_CS1_DECODE(n)    ((((unsigned long)(n))>>8)&0x3)
+#define DDR0_24_ODT_WR_MAP_CS0_MASK       0x00000003
+#define DDR0_24_ODT_WR_MAP_CS0_ENCODE(n)    ((((unsigned long)(n))&0x3)<<0)
+#define DDR0_24_ODT_WR_MAP_CS0_DECODE(n)    ((((unsigned long)(n))>>0)&0x3)
+
+#define DDR0_25                         0x19
+#define DDR0_25_VERSION_MASK              0xFFFF0000 /* Read only */
+#define DDR0_25_VERSION_ENCODE(n)           ((((unsigned long)(n))&0xFFFF)<<16)
+#define DDR0_25_VERSION_DECODE(n)           ((((unsigned long)(n))>>16)&0xFFFF)
+#define DDR0_25_OUT_OF_RANGE_LENGTH_MASK  0x000003FF /* Read only */
+#define DDR0_25_OUT_OF_RANGE_LENGTH_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
+#define DDR0_25_OUT_OF_RANGE_LENGTH_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
+
+#define DDR0_26                         0x1A
+#define DDR0_26_TRAS_MAX_MASK             0xFFFF0000
+#define DDR0_26_TRAS_MAX_ENCODE(n)          ((((unsigned long)(n))&0xFFFF)<<16)
+#define DDR0_26_TRAS_MAX_DECODE(n)          ((((unsigned long)(n))>>16)&0xFFFF)
+#define DDR0_26_TREF_MASK                 0x00003FFF
+#define DDR0_26_TREF_ENCODE(n)              ((((unsigned long)(n))&0x3FF)<<0)
+#define DDR0_26_TREF_DECODE(n)              ((((unsigned long)(n))>>0)&0x3FF)
+
+#define DDR0_27                         0x1B
+#define DDR0_27_EMRS_DATA_MASK            0x3FFF0000
+#define DDR0_27_EMRS_DATA_ENCODE(n)         ((((unsigned long)(n))&0x3FFF)<<16)
+#define DDR0_27_EMRS_DATA_DECODE(n)         ((((unsigned long)(n))>>16)&0x3FFF)
+#define DDR0_27_TINIT_MASK                0x0000FFFF
+#define DDR0_27_TINIT_ENCODE(n)             ((((unsigned long)(n))&0xFFFF)<<0)
+#define DDR0_27_TINIT_DECODE(n)             ((((unsigned long)(n))>>0)&0xFFFF)
+
+#define DDR0_28                         0x1C
+#define DDR0_28_EMRS3_DATA_MASK           0x3FFF0000
+#define DDR0_28_EMRS3_DATA_ENCODE(n)        ((((unsigned long)(n))&0x3FFF)<<16)
+#define DDR0_28_EMRS3_DATA_DECODE(n)        ((((unsigned long)(n))>>16)&0x3FFF)
+#define DDR0_28_EMRS2_DATA_MASK           0x00003FFF
+#define DDR0_28_EMRS2_DATA_ENCODE(n)        ((((unsigned long)(n))&0x3FFF)<<0)
+#define DDR0_28_EMRS2_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0x3FFF)
+
+#define DDR0_29                         0x1D
+
+#define DDR0_30                         0x1E
+
+#define DDR0_31                         0x1F
+#define DDR0_31_XOR_CHECK_BITS_MASK       0x0000FFFF
+#define DDR0_31_XOR_CHECK_BITS_ENCODE(n)    ((((unsigned long)(n))&0xFFFF)<<0)
+#define DDR0_31_XOR_CHECK_BITS_DECODE(n)    ((((unsigned long)(n))>>0)&0xFFFF)
+
+#define DDR0_32                         0x20
+#define DDR0_32_OUT_OF_RANGE_ADDR_MASK    0xFFFFFFFF /* Read only */
+#define DDR0_32_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_32_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_33                         0x21
+#define DDR0_33_OUT_OF_RANGE_ADDR_MASK    0x00000001 /* Read only */
+#define DDR0_33_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_33_OUT_OF_RANGE_ADDR_DECODE(n)               ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_34                         0x22
+#define DDR0_34_ECC_U_ADDR_MASK           0xFFFFFFFF /* Read only */
+#define DDR0_34_ECC_U_ADDR_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_34_ECC_U_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_35                         0x23
+#define DDR0_35_ECC_U_ADDR_MASK           0x00000001 /* Read only */
+#define DDR0_35_ECC_U_ADDR_ENCODE(n)        ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_35_ECC_U_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_36                         0x24
+#define DDR0_36_ECC_U_DATA_MASK           0xFFFFFFFF /* Read only */
+#define DDR0_36_ECC_U_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_36_ECC_U_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_37                         0x25
+#define DDR0_37_ECC_U_DATA_MASK           0xFFFFFFFF /* Read only */
+#define DDR0_37_ECC_U_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_37_ECC_U_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_38                         0x26
+#define DDR0_38_ECC_C_ADDR_MASK           0xFFFFFFFF /* Read only */
+#define DDR0_38_ECC_C_ADDR_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_38_ECC_C_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_39                         0x27
+#define DDR0_39_ECC_C_ADDR_MASK           0x00000001 /* Read only */
+#define DDR0_39_ECC_C_ADDR_ENCODE(n)        ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_39_ECC_C_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_40                         0x28
+#define DDR0_40_ECC_C_DATA_MASK           0xFFFFFFFF /* Read only */
+#define DDR0_40_ECC_C_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_40_ECC_C_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_41                         0x29
+#define DDR0_41_ECC_C_DATA_MASK           0xFFFFFFFF /* Read only */
+#define DDR0_41_ECC_C_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_41_ECC_C_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_42                         0x2A
+#define DDR0_42_ADDR_PINS_MASK            0x07000000
+#define DDR0_42_ADDR_PINS_ENCODE(n)         ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_42_ADDR_PINS_DECODE(n)         ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_42_CASLAT_LIN_GATE_MASK      0x0000000F
+#define DDR0_42_CASLAT_LIN_GATE_ENCODE(n)   ((((unsigned long)(n))&0xF)<<0)
+#define DDR0_42_CASLAT_LIN_GATE_DECODE(n)   ((((unsigned long)(n))>>0)&0xF)
+
+#define DDR0_43                         0x2B
+#define DDR0_43_TWR_MASK                  0x07000000
+#define DDR0_43_TWR_ENCODE(n)               ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_43_TWR_DECODE(n)               ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_43_APREBIT_MASK              0x000F0000
+#define DDR0_43_APREBIT_ENCODE(n)           ((((unsigned long)(n))&0xF)<<16)
+#define DDR0_43_APREBIT_DECODE(n)           ((((unsigned long)(n))>>16)&0xF)
+#define DDR0_43_COLUMN_SIZE_MASK          0x00000700
+#define DDR0_43_COLUMN_SIZE_ENCODE(n)       ((((unsigned long)(n))&0x7)<<8)
+#define DDR0_43_COLUMN_SIZE_DECODE(n)       ((((unsigned long)(n))>>8)&0x7)
+#define DDR0_43_EIGHT_BANK_MODE_MASK      0x00000001
+#define DDR0_43_EIGHT_BANK_MODE_8_BANKS     0x00000001
+#define DDR0_43_EIGHT_BANK_MODE_4_BANKS     0x00000000
+#define DDR0_43_EIGHT_BANK_MODE_ENCODE(n)   ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_43_EIGHT_BANK_MODE_DECODE(n)   ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_44                         0x2C
+#define DDR0_44_TRCD_MASK                 0x000000FF
+#define DDR0_44_TRCD_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<0)
+#define DDR0_44_TRCD_DECODE(n)              ((((unsigned long)(n))>>0)&0xFF)
+
+#endif /* _SPD_SDRAM_DENALI_H_ */

board/esd/pmc440/u-boot-nand.lds

@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+
+    /* Align to next NAND block */
+    . = ALIGN(0x4000);
+    common/environment.o  (.ppcenv)
+    /* Keep some space here for redundant env and potential bad env blocks */
+    . = ALIGN(0x10000);
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+
+  _end = . ;
+  PROVIDE (end = .);
+}

board/esd/pmc440/u-boot.lds

@@ -28,13 +28,11 @@ SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/
 SECTIONS
 {
   .resetvec 0xFFFFFFFC :
-/*  .resetvec 0x01FFFFFC :*/
   {
     *(.resetvec)
   } = 0xffff
 
   .bootpg 0xFFFFF000 :
-/*  .bootpg 0x01FFF000 :*/
   {
     cpu/ppc4xx/start.o	(.bootpg)
   } = 0xffff
@@ -69,20 +67,6 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    board/esd/cpci440/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -95,7 +79,6 @@ SECTIONS
     *(.rodata)
     *(.rodata1)
     *(.rodata.str1.4)
-    *(.eh_frame)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
@@ -154,6 +137,9 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
+
+  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+
   _end = . ;
   PROVIDE (end = .);
 }

board/esd/voh405/u-boot.lds

@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     cpu/ppc4xx/4xx_enet.o	(.text)

board/esd/voh405/voh405.c

@@ -22,6 +22,7 @@
  */
 
 #include <common.h>
+#include <asm/io.h>
 #include <asm/processor.h>
 #include <command.h>
 #include <malloc.h>
@@ -112,11 +113,11 @@ int misc_init_f (void)
 
 int misc_init_r (void)
 {
-	volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
+	unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
-	volatile unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
+	unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
-	volatile unsigned short *lcd_contrast =
+	unsigned short *lcd_contrast =
 		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 4);
-	volatile unsigned short *lcd_backlight =
+	unsigned short *lcd_backlight =
 		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 6);
 	unsigned char *dst;
 	ulong len = sizeof(fpgadata);
@@ -180,25 +181,37 @@ int misc_init_r (void)
 	/*
 	 * Reset FPGA via FPGA_INIT pin
 	 */
-	out32(GPIO0_TCR, in32(GPIO0_TCR) | FPGA_INIT); /* setup FPGA_INIT as output */
+	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | FPGA_INIT); /* setup FPGA_INIT as output */
-	out32(GPIO0_OR, in32(GPIO0_OR) & ~FPGA_INIT);  /* reset low */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~FPGA_INIT);  /* reset low */
 	udelay(1000); /* wait 1ms */
-	out32(GPIO0_OR, in32(GPIO0_OR) | FPGA_INIT);   /* reset high */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | FPGA_INIT);   /* reset high */
 	udelay(1000); /* wait 1ms */
 
 	/*
 	 * Reset external DUARTs
 	 */
-	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
 	udelay(10); /* wait 10us */
-	out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
 	udelay(1000); /* wait 1ms */
 
+	/*
+	 * Set NAND-FLASH GPIO signals to default
+	 */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_NAND_CE);
+
+	/*
+	 * Setup EEPROM write protection
+	 */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_EEPROM_WP);
+	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CFG_EEPROM_WP);
+
 	/*
 	 * Enable interrupts in exar duart mcr[3]
 	 */
-	*duart0_mcr = 0x08;
+	out_8(duart0_mcr, 0x08);
-	*duart1_mcr = 0x08;
+	out_8(duart1_mcr, 0x08);
 
 	/*
 	 * Init lcd interface and display logo
@@ -240,17 +253,23 @@ int misc_init_r (void)
 	/*
 	 * Set invert bit in small lcd controller
 	 */
-	*(unsigned char *)(CFG_LCD_SMALL_REG + 2) |= 0x01;
+	out_8((unsigned char *)(CFG_LCD_SMALL_REG + 2),
+	      in_8((unsigned char *)(CFG_LCD_SMALL_REG + 2)) | 0x01);
 
 	/*
 	 * Set default contrast voltage on epson vga controller
 	 */
-	*lcd_contrast = 0x4646;
+	out_be16(lcd_contrast, 0x4646);
 
 	/*
 	 * Enable backlight
 	 */
-	*lcd_backlight = 0xffff;
+	out_be16(lcd_backlight, 0xffff);
+
+	/*
+	 * Enable external I2C bus
+	 */
+	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CFG_IIC_ON);
 
 	return (0);
 }
@@ -281,11 +300,6 @@ int checkboard (void)
 
 	putc ('\n');
 
-	/*
-	 * Disable sleep mode in LXT971
-	 */
-	lxt971_no_sleep();
-
 	return 0;
 }
 
@@ -334,3 +348,86 @@ void ide_set_reset(int on)
 	}
 }
 #endif /* CONFIG_IDE_RESET */
+
+#if defined(CONFIG_RESET_PHY_R)
+void reset_phy(void)
+{
+#ifdef CONFIG_LXT971_NO_SLEEP
+
+	/*
+	 * Disable sleep mode in LXT971
+	 */
+	lxt971_no_sleep();
+#endif
+}
+#endif
+
+#if defined(CFG_EEPROM_WREN)
+/* Input: <dev_addr>  I2C address of EEPROM device to enable.
+ *         <state>     -1: deliver current state
+ *	               0: disable write
+ *		       1: enable write
+ *  Returns:           -1: wrong device address
+ *                      0: dis-/en- able done
+ *		     0/1: current state if <state> was -1.
+ */
+int eeprom_write_enable (unsigned dev_addr, int state)
+{
+	if (CFG_I2C_EEPROM_ADDR != dev_addr) {
+		return -1;
+	} else {
+		switch (state) {
+		case 1:
+			/* Enable write access, clear bit GPIO0. */
+			out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_EEPROM_WP);
+			state = 0;
+			break;
+		case 0:
+			/* Disable write access, set bit GPIO0. */
+			out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_EEPROM_WP);
+			state = 0;
+			break;
+		default:
+			/* Read current status back. */
+			state = (0 == (in_be32((void*)GPIO0_OR) & CFG_EEPROM_WP));
+			break;
+		}
+	}
+	return state;
+}
+
+int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int query = argc == 1;
+	int state = 0;
+
+	if (query) {
+		/* Query write access state. */
+		state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1);
+		if (state < 0) {
+			puts ("Query of write access state failed.\n");
+		} else {
+			printf ("Write access for device 0x%0x is %sabled.\n",
+				CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+			state = 0;
+		}
+	} else {
+		if ('0' == argv[1][0]) {
+			/* Disable write access. */
+			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0);
+		} else {
+			/* Enable write access. */
+			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1);
+		}
+		if (state < 0) {
+			puts ("Setup of write access state failed.\n");
+		}
+	}
+
+	return state;
+}
+
+U_BOOT_CMD(eepwren,	2,	0,	do_eep_wren,
+	   "eepwren - Enable / disable / query EEPROM write access\n",
+	   NULL);
+#endif /* #if defined(CFG_EEPROM_WREN) */

board/esd/vom405/u-boot.lds

@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)

board/esd/wuh405/u-boot.lds

@@ -64,7 +64,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)

board/exbitgen/u-boot.lds

@@ -66,7 +66,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
     common/dlmalloc.o	(.text)

board/freescale/common/Makefile

@@ -31,7 +31,9 @@ LIB	= $(obj)lib$(VENDOR).a
 
 COBJS	:= sys_eeprom.o	\
 	   pixis.o	\
-	   pq-mds-pib.o
+	   pq-mds-pib.o \
+	   fsl_logo_bmp.o \
+	   fsl_diu_fb.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))

board/freescale/common/fsl_diu_fb.c

@@ -0,0 +1,624 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * York Sun <yorksun@freescale.com>
+ *
+ * FSL DIU Framebuffer driver
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <i2c.h>
+#include <malloc.h>
+
+#ifdef CONFIG_FSL_DIU_FB
+
+#include "fsl_diu_fb.h"
+
+
+#ifdef DEBUG
+#define DPRINTF(fmt, args...) printf("%s: " fmt,__FUNCTION__,## args)
+#else
+#define DPRINTF(fmt, args...)
+#endif
+
+
+struct fb_videomode {
+	const char *name;	/* optional */
+	unsigned int refresh;		/* optional */
+	unsigned int xres;
+	unsigned int yres;
+	unsigned int pixclock;
+	unsigned int left_margin;
+	unsigned int right_margin;
+	unsigned int upper_margin;
+	unsigned int lower_margin;
+	unsigned int hsync_len;
+	unsigned int vsync_len;
+	unsigned int sync;
+	unsigned int vmode;
+	unsigned int flag;
+};
+
+#define FB_SYNC_VERT_HIGH_ACT	2	/* vertical sync high active	*/
+#define FB_SYNC_COMP_HIGH_ACT	8	/* composite sync high active   */
+#define FB_VMODE_NONINTERLACED  0	/* non interlaced */
+
+/*
+ * These parameters give default parameters
+ * for video output 1024x768,
+ * FIXME - change timing to proper amounts
+ * hsync 31.5kHz, vsync 60Hz
+ */
+static struct fb_videomode fsl_diu_mode_1024 = {
+	.refresh	= 60,
+	.xres		= 1024,
+	.yres		= 768,
+	.pixclock	= 15385,
+	.left_margin	= 160,
+	.right_margin	= 24,
+	.upper_margin	= 29,
+	.lower_margin	= 3,
+	.hsync_len	= 136,
+	.vsync_len	= 6,
+	.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.vmode		= FB_VMODE_NONINTERLACED
+};
+
+static struct fb_videomode fsl_diu_mode_1280 = {
+	.name		= "1280x1024-60",
+	.refresh	= 60,
+	.xres		= 1280,
+	.yres		= 1024,
+	.pixclock	= 9375,
+	.left_margin	= 38,
+	.right_margin	= 128,
+	.upper_margin	= 2,
+	.lower_margin	= 7,
+	.hsync_len	= 216,
+	.vsync_len	= 37,
+	.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.vmode		= FB_VMODE_NONINTERLACED
+};
+
+/*
+ * These are the fields of area descriptor(in DDR memory) for every plane
+ */
+struct diu_ad {
+	/* Word 0(32-bit) in DDR memory */
+	unsigned int pix_fmt; /* hard coding pixel format */
+	/* Word 1(32-bit) in DDR memory */
+	unsigned int addr;
+	/* Word 2(32-bit) in DDR memory */
+	unsigned int src_size_g_alpha;
+	/* Word 3(32-bit) in DDR memory */
+	unsigned int aoi_size;
+	/* Word 4(32-bit) in DDR memory */
+	unsigned int offset_xyi;
+	/* Word 5(32-bit) in DDR memory */
+	unsigned int offset_xyd;
+	/* Word 6(32-bit) in DDR memory */
+	unsigned int ckmax_r:8;
+	unsigned int ckmax_g:8;
+	unsigned int ckmax_b:8;
+	unsigned int res9:8;
+	/* Word 7(32-bit) in DDR memory */
+	unsigned int ckmin_r:8;
+	unsigned int ckmin_g:8;
+	unsigned int ckmin_b:8;
+	unsigned int res10:8;
+	/* Word 8(32-bit) in DDR memory */
+	unsigned int next_ad;
+	/* Word 9(32-bit) in DDR memory, just for 64-bit aligned */
+	unsigned int res1;
+	unsigned int res2;
+	unsigned int res3;
+}__attribute__ ((packed));
+
+/*
+ * DIU register map
+ */
+struct diu {
+	unsigned int desc[3];
+	unsigned int gamma;
+	unsigned int pallete;
+	unsigned int cursor;
+	unsigned int curs_pos;
+	unsigned int diu_mode;
+	unsigned int bgnd;
+	unsigned int bgnd_wb;
+	unsigned int disp_size;
+	unsigned int wb_size;
+	unsigned int wb_mem_addr;
+	unsigned int hsyn_para;
+	unsigned int vsyn_para;
+	unsigned int syn_pol;
+	unsigned int thresholds;
+	unsigned int int_status;
+	unsigned int int_mask;
+	unsigned int colorbar[8];
+	unsigned int filling;
+	unsigned int plut;
+} __attribute__ ((packed));
+
+struct diu_hw {
+	struct diu *diu_reg;
+	volatile unsigned int mode;		/* DIU operation mode */
+};
+
+struct diu_addr {
+	unsigned char  *  paddr;	/* Virtual address */
+	unsigned int 	   offset;
+};
+
+#define FSL_DIU_BASE_OFFSET	0x2C000	/* Offset of Display Interface Unit */
+
+/*
+ * Modes of operation of DIU
+ */
+#define MFB_MODE0	0	/* DIU off */
+#define MFB_MODE1	1	/* All three planes output to display */
+#define MFB_MODE2	2	/* Plane 1 to display,
+				 * planes 2+3 written back to memory */
+#define MFB_MODE3	3	/* All three planes written back to memory */
+#define MFB_MODE4	4	/* Color bar generation */
+
+#define MAX_CURS		32
+
+
+
+static struct fb_info fsl_fb_info;
+static struct diu_addr gamma, cursor;
+static struct diu_ad fsl_diu_fb_ad __attribute__ ((aligned(32)));
+static struct diu_ad dummy_ad __attribute__ ((aligned(32)));
+static unsigned char *dummy_fb;
+static struct diu_hw dr = {
+	.mode = MFB_MODE1,
+};
+
+int fb_enabled = 0;
+int fb_initialized = 0;
+const int default_xres = 1280;
+const int default_pixel_format = 0x88882317;
+
+static int map_video_memory(struct fb_info *info, unsigned long bytes_align);
+static void enable_lcdc(void);
+static void disable_lcdc(void);
+static int fsl_diu_enable_panel(struct fb_info *info);
+static int fsl_diu_disable_panel(struct fb_info *info);
+static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align);
+static u32 get_busfreq(void);
+
+
+int fsl_diu_init(int xres,
+		 unsigned int pixel_format,
+		 int gamma_fix,
+		 unsigned char *splash_bmp)
+{
+	struct fb_videomode *fsl_diu_mode_db;
+	struct diu_ad *ad = &fsl_diu_fb_ad;
+	struct diu *hw;
+	struct fb_info *info = &fsl_fb_info;
+	struct fb_var_screeninfo *var = &info->var;
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_gur_t *gur = &immap->im_gur;
+	volatile unsigned int *guts_clkdvdr = &gur->clkdvdr;
+	unsigned char *gamma_table_base;
+	unsigned int i, j;
+	unsigned long speed_ccb, temp, pixval;
+
+	DPRINTF("Enter fsl_diu_init\n");
+	dr.diu_reg = (struct diu *) (CFG_IMMR + FSL_DIU_BASE_OFFSET);
+	hw = (struct diu *) dr.diu_reg;
+
+	disable_lcdc();
+
+	if (xres == 1280) {
+		fsl_diu_mode_db = &fsl_diu_mode_1280;
+	} else {
+		fsl_diu_mode_db = &fsl_diu_mode_1024;
+	}
+
+	if (0 == fb_initialized) {
+		allocate_buf(&gamma, 768, 32);
+		DPRINTF("gamma is allocated @ 0x%x\n",
+			(unsigned int)gamma.paddr);
+		allocate_buf(&cursor, MAX_CURS * MAX_CURS * 2, 32);
+		DPRINTF("curosr is allocated @ 0x%x\n",
+			(unsigned int)cursor.paddr);
+
+		/* create a dummy fb and dummy ad */
+		dummy_fb = malloc(64);
+		if (NULL == dummy_fb) {
+			printf("Cannot allocate dummy fb\n");
+			return -1;
+		}
+		dummy_ad.addr = cpu_to_le32((unsigned int)dummy_fb);
+		dummy_ad.pix_fmt = 0x88882317;
+		dummy_ad.src_size_g_alpha = 0x04400000;	/* alpha = 0 */
+		dummy_ad.aoi_size = 0x02000400;
+		dummy_ad.offset_xyi = 0;
+		dummy_ad.offset_xyd = 0;
+		dummy_ad.next_ad = 0;
+		/* Memory allocation for framebuffer */
+		if (map_video_memory(info, 32)) {
+			printf("Unable to allocate fb memory 1\n");
+			return -1;
+		}
+	} else {
+		memset(info->screen_base, 0, info->smem_len);
+	}
+
+	dr.diu_reg->desc[0] = (unsigned int) &dummy_ad;
+	dr.diu_reg->desc[1] = (unsigned int) &dummy_ad;
+	dr.diu_reg->desc[2] = (unsigned int) &dummy_ad;
+	DPRINTF("dummy dr.diu_reg->desc[0] = 0x%x\n", dr.diu_reg->desc[0]);
+	DPRINTF("dummy desc[0] = 0x%x\n", hw->desc[0]);
+
+	/* read mode info */
+	var->xres = fsl_diu_mode_db->xres;
+	var->yres = fsl_diu_mode_db->yres;
+	var->bits_per_pixel = 32;
+	var->pixclock = fsl_diu_mode_db->pixclock;
+	var->left_margin = fsl_diu_mode_db->left_margin;
+	var->right_margin = fsl_diu_mode_db->right_margin;
+	var->upper_margin = fsl_diu_mode_db->upper_margin;
+	var->lower_margin = fsl_diu_mode_db->lower_margin;
+	var->hsync_len = fsl_diu_mode_db->hsync_len;
+	var->vsync_len = fsl_diu_mode_db->vsync_len;
+	var->sync = fsl_diu_mode_db->sync;
+	var->vmode = fsl_diu_mode_db->vmode;
+	info->line_length = var->xres * var->bits_per_pixel / 8;
+	info->logo_size = 0;
+	info->logo_height = 0;
+
+	ad->pix_fmt = pixel_format;
+	ad->addr    = cpu_to_le32((unsigned int)info->screen_base);
+	ad->src_size_g_alpha
+			= cpu_to_le32((var->yres << 12) | var->xres);
+	/* fix me. AOI should not be greater than display size */
+	ad->aoi_size 	= cpu_to_le32(( var->yres << 16) |  var->xres);
+	ad->offset_xyi = 0;
+	ad->offset_xyd = 0;
+
+	/* Disable chroma keying function */
+	ad->ckmax_r = 0;
+	ad->ckmax_g = 0;
+	ad->ckmax_b = 0;
+
+	ad->ckmin_r = 255;
+	ad->ckmin_g = 255;
+	ad->ckmin_b = 255;
+
+	gamma_table_base = gamma.paddr;
+	DPRINTF("gamma_table_base is allocated @ 0x%x\n",
+		(unsigned int)gamma_table_base);
+
+	/* Prep for DIU init  - gamma table */
+
+	for (i = 0; i <= 2; i++)
+		for (j = 0; j <= 255; j++)
+			*gamma_table_base++ = j;
+
+	if (gamma_fix == 1) {	/* fix the gamma */
+		DPRINTF("Fix gamma table\n");
+		gamma_table_base = gamma.paddr;
+		for (i = 0; i < 256*3; i++) {
+			gamma_table_base[i] = (gamma_table_base[i] << 2)
+				| ((gamma_table_base[i] >> 6) & 0x03);
+		}
+	}
+
+	DPRINTF("update-lcdc: HW - %p\n Disabling DIU\n", hw);
+
+	/* Program DIU registers */
+
+	hw->gamma = (unsigned int) gamma.paddr;
+	hw->cursor= (unsigned int) cursor.paddr;
+	hw->bgnd = 0x007F7F7F;				/* BGND */
+	hw->bgnd_wb = 0; 				/* BGND_WB */
+	hw->disp_size = var->yres << 16 | var->xres;	/* DISP SIZE */
+	hw->wb_size = 0;				/* WB SIZE */
+	hw->wb_mem_addr = 0;				/* WB MEM ADDR */
+	hw->hsyn_para = var->left_margin << 22 |	/* BP_H */
+			var->hsync_len << 11   |	/* PW_H */
+			var->right_margin;		/* FP_H */
+	hw->vsyn_para = var->upper_margin << 22 |	/* BP_V */
+			var->vsync_len << 11    |	/* PW_V  */
+			var->lower_margin;		/* FP_V  */
+
+	/* Pixel Clock configuration */
+	DPRINTF("DIU: Bus Frequency = %d\n", get_busfreq());
+	speed_ccb = get_busfreq();
+
+	DPRINTF("DIU pixclock in ps - %d\n", var->pixclock);
+	temp = 1;
+	temp *= 1000000000;
+	temp /= var->pixclock;
+	temp *= 1000;
+	pixval = speed_ccb / temp;
+	DPRINTF("DIU pixval = %lu\n", pixval);
+
+	hw->syn_pol = 0;			/* SYNC SIGNALS POLARITY */
+	hw->thresholds = 0x00037800;		/* The Thresholds */
+	hw->int_status = 0;			/* INTERRUPT STATUS */
+	hw->int_mask = 0;			/* INT MASK */
+	hw->plut = 0x01F5F666;
+
+	/* Modify PXCLK in GUTS CLKDVDR */
+	DPRINTF("DIU: Current value of CLKDVDR = 0x%08x\n", *guts_clkdvdr);
+	temp = *guts_clkdvdr & 0x2000FFFF;
+	*guts_clkdvdr = temp;				/* turn off clock */
+	*guts_clkdvdr = temp | 0x80000000 | ((pixval & 0x1F) << 16);
+	DPRINTF("DIU: Modified value of CLKDVDR = 0x%08x\n", *guts_clkdvdr);
+
+	fb_initialized = 1;
+
+	if (splash_bmp) {
+		info->logo_height = fsl_diu_display_bmp(splash_bmp, 0, 0, 0);
+		info->logo_size = info->logo_height * info->line_length;
+		DPRINTF("logo height %d, logo_size 0x%x\n",
+			info->logo_height,info->logo_size);
+	}
+
+	/* Enable the DIU */
+	fsl_diu_enable_panel(info);
+	enable_lcdc();
+
+	return 0;
+}
+
+char *fsl_fb_open(struct fb_info **info)
+{
+	*info = &fsl_fb_info;
+	return (char *) ((unsigned int)(*info)->screen_base
+			 + (*info)->logo_size);
+}
+
+void fsl_diu_close(void)
+{
+	struct fb_info *info = &fsl_fb_info;
+	fsl_diu_disable_panel(info);
+}
+
+static int fsl_diu_enable_panel(struct fb_info *info)
+{
+	struct diu *hw = dr.diu_reg;
+	struct diu_ad *ad = &fsl_diu_fb_ad;
+
+	DPRINTF("Entered: enable_panel\n");
+	if (hw->desc[0] != (unsigned int)ad)
+		hw->desc[0] = (unsigned int)ad;
+	DPRINTF("desc[0] = 0x%x\n", hw->desc[0]);
+	return 0;
+}
+
+static int fsl_diu_disable_panel(struct fb_info *info)
+{
+	struct diu *hw = dr.diu_reg;
+
+	DPRINTF("Entered: disable_panel\n");
+	if (hw->desc[0] != (unsigned int)&dummy_ad)
+		hw->desc[0] = (unsigned int)&dummy_ad;
+	return 0;
+}
+
+static int map_video_memory(struct fb_info *info, unsigned long bytes_align)
+{
+	unsigned long offset;
+	unsigned long mask;
+
+	DPRINTF("Entered: map_video_memory\n");
+	/* allocate maximum 1280*1024 with 32bpp */
+	info->smem_len = 1280 * 4 *1024 + bytes_align;
+	DPRINTF("MAP_VIDEO_MEMORY: smem_len = %d\n", info->smem_len);
+	info->screen_base = malloc(info->smem_len);
+	if (info->screen_base == NULL) {
+		printf("Unable to allocate fb memory\n");
+		return -1;
+	}
+	info->smem_start = (unsigned int) info->screen_base;
+	mask = bytes_align - 1;
+	offset = (unsigned long)info->screen_base & mask;
+	if (offset) {
+		info->screen_base += offset;
+		info->smem_len = info->smem_len - (bytes_align - offset);
+	} else
+		info->smem_len = info->smem_len - bytes_align;
+
+	info->screen_size = info->smem_len;
+
+	DPRINTF("Allocated fb @ 0x%08lx, size=%d.\n",
+		info->smem_start, info->smem_len);
+
+	return 0;
+}
+
+static void enable_lcdc(void)
+{
+	struct diu *hw = dr.diu_reg;
+
+	DPRINTF("Entered: enable_lcdc, fb_enabled = %d\n", fb_enabled);
+	if (!fb_enabled) {
+		hw->diu_mode = dr.mode;
+		fb_enabled++;
+	}
+	DPRINTF("diu_mode = %d\n", hw->diu_mode);
+}
+
+static void disable_lcdc(void)
+{
+	struct diu *hw = dr.diu_reg;
+
+	DPRINTF("Entered: disable_lcdc, fb_enabled = %d\n", fb_enabled);
+	if (fb_enabled) {
+		hw->diu_mode = 0;
+		fb_enabled = 0;
+	}
+}
+
+static u32 get_busfreq(void)
+{
+	u32 fs_busfreq = 0;
+
+	fs_busfreq = get_bus_freq(0);
+	return fs_busfreq;
+}
+
+/*
+ * Align to 64-bit(8-byte), 32-byte, etc.
+ */
+static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
+{
+	u32 offset, ssize;
+	u32 mask;
+
+	DPRINTF("Entered: allocate_buf\n");
+	ssize = size + bytes_align;
+	buf->paddr = malloc(ssize);
+	if (!buf->paddr)
+		return -1;
+
+	memset(buf->paddr, 0, ssize);
+	mask = bytes_align - 1;
+	offset = (u32)buf->paddr & mask;
+	if (offset) {
+		buf->offset = bytes_align - offset;
+		buf->paddr = (unsigned char *) ((u32)buf->paddr + offset);
+	} else
+		buf->offset = 0;
+	return 0;
+}
+
+int fsl_diu_display_bmp(unsigned char *bmp,
+			int xoffset,
+			int yoffset,
+			int transpar)
+{
+	struct fb_info *info = &fsl_fb_info;
+	unsigned char r, g, b;
+	unsigned int *fb_t, val;
+	unsigned char *bitmap;
+	unsigned int palette[256];
+	int width, height, bpp, ncolors, raster, offset, x, y, i, k, cpp;
+
+	if (!bmp) {
+		printf("Must supply a bitmap address\n");
+		return 0;
+	}
+
+	raster = bmp[10] + (bmp[11] << 8) + (bmp[12] << 16) + (bmp[13] << 24);
+	width  = (bmp[21] << 24) | (bmp[20] << 16) | (bmp[19] << 8) | bmp[18];
+	height = (bmp[25] << 24) | (bmp[24] << 16) | (bmp[23] << 8) | bmp[22];
+	bpp  = (bmp[29] <<  8) | (bmp[28]);
+	ncolors = bmp[46] + (bmp[47] << 8) + (bmp[48] << 16) + (bmp[49] << 24);
+	bitmap   = bmp + raster;
+	cpp = info->var.bits_per_pixel / 8;
+
+	DPRINTF("bmp = 0x%08x\n", (unsigned int)bmp);
+	DPRINTF("bitmap = 0x%08x\n", (unsigned int)bitmap);
+	DPRINTF("width = %d\n", width);
+	DPRINTF("height = %d\n", height);
+	DPRINTF("bpp = %d\n", bpp);
+	DPRINTF("ncolors = %d\n", ncolors);
+
+	DPRINTF("xres = %d\n", info->var.xres);
+	DPRINTF("yres = %d\n", info->var.yres);
+	DPRINTF("Screen_base = 0x%x\n", (unsigned int)info->screen_base);
+
+	if (((width+xoffset) > info->var.xres) ||
+	    ((height+yoffset) > info->var.yres)) {
+		printf("bitmap is out of range, image too large or too much offset\n");
+		return 0;
+	}
+	if (bpp < 24) {
+		for (i = 0, offset = 54; i < ncolors; i++, offset += 4)
+			palette[i] = (bmp[offset+2] << 16)
+				+ (bmp[offset+1] << 8) + bmp[offset];
+	}
+
+	switch (bpp) {
+	case 1:
+		for (y = height - 1; y >= 0; y--) {
+			fb_t = (unsigned int *) ((unsigned int)info->screen_base + (((y+yoffset) * info->var.xres) + xoffset)*cpp);
+			for (x = 0; x < width; x += 8) {
+				b = *bitmap++;
+				for (k = 0; k < 8; k++) {
+					if (b & 0x80)
+						*fb_t = palette[1];
+					else
+						*fb_t = palette[0];
+					b = b << 1;
+				}
+			}
+			for (i = (width / 2) % 4; i > 0; i--)
+				bitmap++;
+		}
+		break;
+	case 4:
+		for (y = height - 1; y >= 0; y--) {
+			fb_t = (unsigned int *) ((unsigned int)info->screen_base + (((y+yoffset) * info->var.xres) + xoffset)*cpp);
+			for (x = 0; x < width; x += 2) {
+				b = *bitmap++;
+				r = (b >> 4) & 0x0F;
+				g =  b & 0x0F;
+				*fb_t++ = palette[r];
+				*fb_t++ = palette[g];
+			}
+			for (i = (width / 2) % 4; i > 0; i--)
+				bitmap++;
+		}
+		break;
+	case 8:
+		for (y = height - 1; y >= 0; y--) {
+			fb_t = (unsigned int *) ((unsigned int)info->screen_base + (((y+yoffset) * info->var.xres) + xoffset)*cpp);
+			for (x = 0; x < width; x++) {
+				*fb_t++ = palette[ *bitmap++ ];
+			}
+			for (i = (width / 2) % 4; i > 0; i--)
+				bitmap++;
+		}
+		break;
+	case 24:
+		for (y = height - 1; y >= 0; y--) {
+			fb_t = (unsigned int *) ((unsigned int)info->screen_base + (((y+yoffset) * info->var.xres) + xoffset)*cpp);
+			for (x = 0; x < width; x++) {
+				b = *bitmap++;
+				g = *bitmap++;
+				r = *bitmap++;
+				val = (r << 16) + (g << 8) + b;
+				*fb_t++ = val;
+			}
+			for (; (x % 4) != 0; x++)	/* 4-byte alignment */
+				bitmap++;
+		}
+		break;
+	}
+
+	return height;
+}
+
+void fsl_diu_clear_screen(void)
+{
+	struct fb_info *info = &fsl_fb_info;
+
+	memset(info->screen_base, 0, info->smem_len);
+}
+#endif /* CONFIG_FSL_DIU_FB */

board/freescale/common/fsl_diu_fb.h

@@ -0,0 +1,69 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * York Sun <yorksun@freescale.com>
+ *
+ * FSL DIU Framebuffer driver
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+struct fb_var_screeninfo {
+	unsigned int xres;		/* visible resolution		*/
+	unsigned int yres;
+
+	unsigned int bits_per_pixel;	/* guess what			*/
+
+	/* Timing: All values in pixclocks, except pixclock (of course) */
+	unsigned int pixclock;		/* pixel clock in ps (pico seconds) */
+	unsigned int left_margin;	/* time from sync to picture	*/
+	unsigned int right_margin;	/* time from picture to sync	*/
+	unsigned int upper_margin;	/* time from sync to picture	*/
+	unsigned int lower_margin;
+	unsigned int hsync_len;		/* length of horizontal sync	*/
+	unsigned int vsync_len;		/* length of vertical sync	*/
+	unsigned int sync;		/* see FB_SYNC_*		*/
+	unsigned int vmode;		/* see FB_VMODE_*		*/
+	unsigned int rotate;		/* angle we rotate counter clockwise */
+};
+
+struct fb_info {
+	struct fb_var_screeninfo var;	/* Current var */
+	unsigned long smem_start;	/* Start of frame buffer mem */
+					/* (physical address) */
+	unsigned int smem_len;		/* Length of frame buffer mem */
+	unsigned int type;		/* see FB_TYPE_*		*/
+	unsigned int line_length;	/* length of a line in bytes    */
+
+	char *screen_base;
+	unsigned long screen_size;
+	int logo_height;
+	unsigned int logo_size;
+};
+
+
+extern char *fsl_fb_open(struct fb_info **info);
+extern int fsl_diu_init(int xres,
+			unsigned int pixel_format,
+			int gamma_fix,
+			unsigned char *splash_bmp);
+extern void fsl_diu_clear_screen(void);
+extern int fsl_diu_display_bmp(unsigned char *bmp,
+			       int xoffset,
+			       int yoffset,
+			       int transpar);

board/freescale/common/fsl_logo_bmp.c

@@ -0,0 +1,878 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * York Sun <yorksun@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*---------------------------------------------------------------------------
+ * FSL_Logo_BMP --
+ *
+ * A 340x128x4bpp BMP logo.
+ *---------------------------------------------------------------------------
+ */
+unsigned int FSL_Logo_BMP[] = {
+0x424d765c,
+0x00000000,0x00007600,0x00002800,0x00006c01,0x00008000,0x00000100,0x04000000,
+0x0000005c,0x0000130b,0x0000130b,0x00001000,0x00000000,0x00000402,0x04000d91,
+0xbc000b51,0x67001536,0x9a000f2a,0x4b005050,0x50009090,0x90000c70,0x92002e2f,
+0x2e00cfcf,0xcf007c82,0x7c00fbfd,0xfb006f70,0x6f00b0b0,0xb00004bd,0xfa000542,
+0xf9000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0xa9996500,0x0000a999,
+0xa80000aa,0x400006a0,0x00086500,0x86500008,0x699da800,0x0000c999,0x68000056,
+0x5000006a,0x00000a99,0x9a0c6800,0x08699685,0xa5000086,0x99dc4000,0x05999800,
+0x08699dc0,0x0000a600,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x0000008b,0xbb99bbd4,0x004bbb99,0xbba0009b,0x50000bb4,0x0008b900,
+0x5b90005b,0xbb99bbc0,0x0009bb99,0xbb60005b,0xd00000bb,0x0004bbbb,0xbbb9ba00,
+0x4bbbbbbd,0xbd000cbb,0xb9bbb500,0x0cbbba00,0x5bbb9bbb,0x5000db50,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0000006b,0x980006bd,
+0x006b9800,0x89ba006b,0x600009b5,0x0000bb00,0x4bb000bb,0xd00059bc,0x006b9800,
+0x89bd008b,0xb00000db,0x5006bb50,0x089bbd00,0x5bbc086b,0xb9000bb6,0x00059b50,
+0x0cbd0000,0xbb6000c9,0xb500dba0,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x0000009b,0xa00008bb,0x80bb5000,0x00bb805b,0xd00006ba,
+0x00009b50,0x09b405bb,0x000008bb,0x409bc000,0x049bc009,0xb000006b,0xa009b600,
+0x0009b900,0x5b900005,0xbb005bb0,0x00005bb0,0x08b90005,0xbb00000c,0xb900cbd0,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0000005c,
+0x800008bb,0x80bb8000,0x0088008b,0x90000cbd,0x0000dbc0,0x0db505b9,0x0000006d,
+0x50bb8000,0x005b9009,0xb50000cb,0xd00bb500,0x0008bb00,0x8b900000,0x9b50cb90,
+0x000006d5,0x00bb000c,0xbd000000,0x9bc08b90,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00ca9bbb,0x00bb5585,0x8558500b,
+0xb00008b9,0x0000cbd0,0x06ba05bb,0x00000000,0x00bb5000,0x000bb806,0xba00008b,
+0x9009b500,0x00009b50,0x0bb00000,0xdbc05b90,0x00000000,0x009b500c,0xb9000000,
+0xcb900bb0,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0xdbbbbb68,0x009bbbbb,0xbbbbb009,0xb50000bb,0x00008b90,0x05b900bb,
+0x40000000,0x009bc000,0x0009bc0c,0xbd00000b,0xb009ba00,0x00006bc0,0x09b50000,
+0xcb608bb0,0x00000000,0x00dbc008,0xbb000000,0x8bb009b8,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000005,0xbb9c8000,0x00cb9555,
+0xc55bb406,0xba00009b,0x50000bb0,0x08bb009b,0xc0000000,0x00abd000,0x000dbc08,
+0xbb00000d,0xb50cb900,0x0000abd0,0x0dbc0000,0x8b9009b5,0x00000000,0x00cbd000,
+0xbb500000,0x8bb006b6,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x0000000c,0xbd000059,0xa08bb800,0x008bb00c,0xb90000db,0xa00009b8,
+0x009b40cb,0x90000089,0x900bb800,0x0009bc00,0xbb50000d,0xbc00bb50,0x0000db90,
+0x0cb60000,0x0bb00cb9,0x00000899,0x008b9000,0xab900000,0x8bb00cbb,0x80000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000008,0xb90000ab,
+0x900ab940,0x00ab9008,0xbb60009b,0xbc000bb8,0x009b5009,0xbd00006b,0xb00cbb80,
+0x005bb800,0xdb950009,0xba00cbb5,0x0005bbb0,0x08b90000,0x09b8009b,0xd00006b9,
+0x000bb000,0x09bd0000,0xdb9005bb,0x9c880000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0xdb96cdbb,0xc000db96,0xcdbbc000,0xbbb999bb,
+0x6b9dbbb4,0x006bc000,0x9b96cdbb,0xc0006bb6,0xc69bd000,0x6bbb9dbb,0xb50006bb,
+0x96db9bb8,0x00bb0000,0x0dbc0049,0xb9acdbbc,0x069bb995,0x089b9aad,0xbb5000bb,
+0xdbbb0000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x059bbb9c,0x00000c9b,0xbbbc0000,0xd98dbbb6,0x059bbb50,0x00596000,0x0c9bbb9c,
+0x0000089b,0xbbb60000,0xc96c9bbb,0x6000005d,0xbbb9cdbc,0x00998000,0x0c960000,
+0xa9bbb9c0,0x0a9bbb9a,0x000a9bbb,0x950000d9,0x8c9b5000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00008400,0x00000000,0x84000000,
+0x00004800,0x00048000,0x00000000,0x00048800,0x00000000,0x88000000,0x00000880,
+0x00000000,0x08800cb6,0x00000000,0x00000000,0x00488000,0x000ab600,0x00000488,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x000005b9,0x00000000,
+0x00000000,0x00000000,0x0005b900,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x000000bb,0x00000000,0x00000000,0x00000000,0x0000bb00,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x000a9c00,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0000009b,
+0x80000000,0x00000000,0x00000000,0x0000cc00,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x000cbd00,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x000000db,0x50000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x0004c500,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x0000005c,0x50000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x008a66d6,0x6a580000,0x00000000,0x00000000,0x000008c6,
+0xd6d6a580,0x00000000,0x00000000,0x000008ca,0x6d6d6a58,0x00000000,0x00000000,
+0x00000004,0x5a6d6da5,0x80000000,0x00000000,0x00008c6d,0x66c50000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x005cad6d,0x6a580000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00033400,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000009,
+0x99d9999d,0x50000000,0x00a999d9,0x99960000,0x00000000,0x00000008,0xdbbbbbbb,
+0xbbbb9650,0x00000000,0x00000000,0x008dbbbb,0xbbbbbbb9,0x65000000,0x00000000,
+0x005dbbbb,0xbbbbbbbb,0x96800000,0x00000000,0x00000c9b,0xbbbbbbbb,0xb9640000,
+0x00000000,0x00c9bbbb,0xbbbbbd80,0x00c999d9,0x99980000,0x06999d99,0x99600000,
+0x00000008,0x6bbbbbbb,0xbbbb9d50,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x04ffff30,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000009,0xbbbbbbbb,0xd0000000,0x00cbbbbb,
+0xbbbb0000,0x00000000,0x000004db,0xbbbbbbbb,0xbbbbbbb9,0x50000000,0x00000000,
+0x06bbbbbb,0xbbbbbbbb,0xbb950000,0x00000000,0x59bbbbbb,0xbbbbbbbb,0xbbb95000,
+0x00000000,0x00059bbb,0xbbbbbbbb,0xbbbb6800,0x00000000,0x89bbbbbb,0xbbbbbbb9,
+0x806bbbbb,0xbbb40000,0x0abbbbbb,0xbbb00000,0x0000006b,0xbbbbbbbb,0xbbbbbbb9,
+0x50000000,0x00000000,0x00000000,0x00000000,0x00000004,0xffffffff,0x40000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x0000000d,0xbbbbbbbb,0x90000000,0x005bbbbb,0xbbbb8000,0x00000000,0x000089bb,
+0xbbbbbbbb,0xbbbbbbbb,0xbd800000,0x00000008,0x9bbbbbbb,0xbbbbbbbb,0xbbbb9800,
+0x0000000d,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbd00,0x00000000,0x00cbbbbb,0xbbbbbbbb,
+0xbbbbbbc0,0x00000000,0xdbbbbbbb,0xbbbbbbbb,0xba6bbbbb,0xbbb80000,0x05bbbbbb,
+0xbbb40000,0x000009bb,0xbbbbbbbb,0xbbbbbbbb,0xb9800000,0x00000000,0x00000000,
+0x00000000,0x000004ff,0xffffffff,0xf3400000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x0000000a,0xbbbbbbbb,0xb0000000,
+0x008bbbbb,0xbbbbc000,0x00000000,0x0000bbbb,0xbbbbbbbb,0xbbbbbbbb,0xbb950000,
+0x00000009,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbc0,0x0000089b,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbbbb98,0x00000000,0x0abbbbbb,0xbbbbbbbb,0xbbbbbbbd,0x4000000c,0xbbbbbbbb,
+0xbbbbbbbb,0xbb9bbbbb,0xbbb80000,0x08bbbbbb,0xbbb50000,0x00049bbb,0xbbbbbbbb,
+0xbbbbbbbb,0xbbbc0000,0x00000000,0x00000000,0x00000000,0x0004ffff,0xffffffff,
+0xfff30000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000005,0xbbbbbbbb,0xb8000000,0x0009bbbb,0xbbbb6000,0x00000000,
+0x0009bbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbc000,0x000000db,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbbbbb6,0x000089bb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0x80000000,0x8bbbbbbb,
+0xbbbbbbbb,0xbbbbbbbb,0x95000009,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbb50000,
+0x00bbbbbb,0xbbb60000,0x0006bbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbba000,0x00000000,
+0x00000000,0x00000000,0x043fffff,0xffffffff,0xfffff400,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0xbbbbbbbb,
+0xbc000000,0x000dbbbb,0xbbbb9000,0x00000000,0x005bbbbb,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbbbc00,0x000008bb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0x60009bbb,0xbbbbbbbb,
+0xbbbbbbbb,0xbbbbbbbb,0x90000000,0x9bbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbb80000b,
+0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbc0000,0x009bbbbb,0xbbbd0000,0x008bbbbb,
+0xbbbbbbbb,0xbbbbbbbb,0xbbbbbd00,0x00000000,0x00000000,0x00000000,0x003fffff,
+0xffffffff,0xfffffff0,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0xbbbbbbbb,0xb6000000,0x000abbbb,0xbbbbb000,
+0x00000000,0x009bbbbb,0xbbbbbb65,0x5569bbbb,0xbbbbbbc0,0x00000dbb,0xbbbbbbbb,
+0xb6c5569b,0xbbbbbbbb,0xba08bbbb,0xbbbbbbbb,0x96c55c6b,0xbbbbbbbb,0xb6000005,
+0xbbbbbbbb,0xbbbbbddd,0x9bbbbbbb,0xbbb8004b,0xbbbbbbbb,0xb9655cdb,0xbbbbbbbb,
+0xbbbd0000,0x006bbbbb,0xbbbb0000,0x00dbbbbb,0xbbbbbbdc,0x8c69bbbb,0xbbbbbbc0,
+0x00000000,0x00000000,0x00000000,0x0004ffff,0xffffffff,0xffffffff,0x30000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0xdbbbbbbb,0xb9000000,0x0005bbbb,0xbbbbb800,0x00000000,0x00bbbbbb,0xbbbbd000,
+0x0000cbbb,0xbbbbbbb8,0x00000bbb,0xbbbbbbb9,0x0000000c,0xbbbbbbbb,0xbb5006bb,
+0xbbbbbbd8,0x00000000,0x6bbbbbbb,0xbb400006,0xbbbbbbbb,0xbbb50000,0x08dbbbbb,
+0xbbb9000b,0xbbbbbbbb,0x94000008,0xdbbbbbbb,0xbbb90000,0x00cbbbbb,0xbbbb4000,
+0x00bbbbbb,0xbbbbd400,0x0000cbbb,0xbbbbbbb5,0x00000000,0x00000000,0x00000000,
+0x000004ff,0xffffffff,0xffffffff,0xff400000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x6bbbbbbb,0xbb000000,0x0008bbbb,
+0xbbbbb500,0x00000000,0x0cbbbbbb,0xbbb90000,0x000008bb,0xbbbbbb95,0x00008bbb,
+0xbbbbbb98,0x00000000,0x49bbbbbb,0xbbc0008d,0xbbbbb500,0x00000000,0x0dbbbbbb,
+0xbbc0000b,0xbbbbbbbb,0xbb800000,0x0005bbbb,0xbb98000b,0xbbbbbbbb,0xc0000000,
+0x06bbbbbb,0xbbbb0000,0x008bbbbb,0xbbbb5000,0x08bbbbbb,0xbbb98000,0x0000089b,
+0xbbbbbbbc,0x00000000,0x00000000,0x00000000,0x00000043,0xffffffff,0xffffffff,
+0xfff34000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x5bbbbbbb,0xbb800000,0x0000bbbb,0xbbbbb600,0x00000000,0x0abbbbbb,
+0xbbb50000,0x00000009,0xbbbbbc00,0x0000cbbb,0xbbbbbbc0,0x00000000,0x089bbbbb,
+0xa0000000,0xc9bb8000,0x00000000,0x05bbbbbb,0xbb90000b,0xbbbbbbbb,0xbc000000,
+0x00005bbb,0x95000009,0xbbbbbbbb,0x50000000,0x009bbbbb,0xbbbb5000,0x000bbbbb,
+0xbbbba000,0x0cbbbbbb,0xbbbc0000,0x00000049,0xbbbbba00,0x00000000,0x00000000,
+0x00000000,0x00000000,0x4fffffff,0xffffffff,0xfffff300,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x8bbbbbbb,0xbb500000,
+0x0000dbbb,0xbbbbb900,0x00000000,0x06bbbbbb,0xbbb00000,0x00000004,0xbbbc0000,
+0x0000abbb,0xbbbbbb40,0x00000000,0x0089bba0,0x00000000,0x00680000,0x00000000,
+0x0abbbbbb,0xbbb0008b,0xbbbbbbbb,0xb8000000,0x00000695,0x0000000c,0xbbbbbbbb,
+0xd0000000,0x008bbbbb,0xbbbbc000,0x0009bbbb,0xbbbbd000,0x0cbbbbbb,0xbbb40000,
+0x00000008,0x9bb60000,0x00000000,0x00000000,0x00000000,0x00000000,0x003fffff,
+0xffffffff,0xffff3400,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x0bbbbbbb,0xbb600000,0x00006bbb,0xbbbbb900,0x00000000,
+0x0dbbbbbb,0xbb900000,0x00000000,0x8c000000,0x00006bbb,0xbbbbbb00,0x00000000,
+0x0008a400,0x00000000,0x00000000,0x00000008,0x6bbbbbbb,0xbbb5005b,0xbbbbbbbb,
+0x90000000,0x00000000,0x00000008,0xbbbbbbbb,0xb8000000,0x000dbbbb,0xbbbb6000,
+0x000dbbbb,0xbbbb9000,0x0abbbbbb,0xbbb00000,0x00000000,0x06000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00003fff,0xffffffff,0xfff40000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0dbbbbbb,
+0xbbd00000,0x00005bbb,0xbbbbbb80,0x00000000,0x06bbbbbb,0xbb900000,0x00000000,
+0x00000000,0x0000abbb,0xbbbbbb00,0x00000000,0x00000000,0x00000000,0x00000000,
+0x0005ad9b,0xbbbbbbbb,0xbbb5008b,0xbbbbbbbb,0x90000000,0x00000000,0x00000000,
+0xdbbbbbbb,0xb9500000,0x000cbbbb,0xbbbb9000,0x000cbbbb,0xbbbbb400,0x0cbbbbbb,
+0xbbb00000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x000004ff,0xffffffff,0xf4000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x06bbbbbb,0xbbb00000,0x00008bbb,0xbbbbbb50,
+0x00000000,0x06bbbbbb,0xbbb00000,0x00000000,0x00000000,0x0000cbbb,0xbbbbbb00,
+0x00000000,0x00000000,0x00000000,0x00000045,0xd9bbbbbb,0xbbbbbbbb,0xbbb5008b,
+0xbbbbbbbb,0x90000000,0x00000000,0x00000000,0x0bbbbbbb,0xbbb95400,0x0004bbbb,
+0xbbbbb000,0x0008bbbb,0xbbbbb800,0x0cbbbbbb,0xbbb00000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000004,0xfffffff4,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x0cbbbbbb,0xbbb80000,0x00000bbb,0xbbbbbb60,0x00000000,0x0cbbbbbb,0xbbbddddd,
+0xdddddddd,0xdddddddd,0xd8005bbb,0xbbbbbbdd,0xdddddddd,0xdddddddd,0xdddd8000,
+0x00008dbb,0xbbbbbbbb,0xbbbbbbbb,0xbbb4000b,0xbbbbbbbb,0x90000000,0x00000000,
+0x00000000,0x05bbbbbb,0xbbbbbb96,0x5000bbbb,0xbbbbb800,0x0000bbbb,0xbbbbba00,
+0x05bbbbbb,0xbbb9dddd,0xdddddddd,0xdddddddd,0xd8000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x43fff400,0x00000000,0x0007e140,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x08bbbbbb,0xbbb50000,0x000009bb,
+0xbbbbbbd0,0x00000000,0x08bbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xb8004bbb,
+0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbc000,0x0006bbbb,0xbbbbbbbb,0xbbbbbbbb,
+0xbbd0000b,0xbbbbbbbb,0xb0000000,0x00000000,0x00000000,0x00cbbbbb,0xbbbbbbbb,
+0xbb9c9bbb,0xbbbbbc00,0x00009bbb,0xbbbbbd00,0x00bbbbbb,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbbbbbb,0xbc000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00440000,
+0x00000000,0x07eeeee2,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00bbbbbb,0xbbba0000,0x000006bb,0xbbbbbbb0,0x00000000,0x00bbbbbb,
+0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbc000bbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbb6000,0x00dbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xb980000d,0xbbbbbbbb,0xb0000000,
+0x00000000,0x00000000,0x00089bbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbb600,0x0000dbbb,
+0xbbbbb900,0x00bbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xb6000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000002,0xeeeeeeee,0x12000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x009bbbbb,0xbbbd0000,
+0x00000cbb,0xbbbbbbb0,0x00000000,0x009bbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,
+0xb6000dbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbb6000,0x0cbbbbbb,0xbbbbbbbb,
+0xbbbbbbbb,0x94000006,0xbbbbbbbb,0xbc000000,0x00000000,0x00000000,0x00000cbb,
+0xbbbbbbbb,0xbbbbbbbb,0xbbbbb900,0x0000cbbb,0xbbbbbb00,0x006bbbbb,0xbbbbbbbb,
+0xbbbbbbbb,0xbbbbbbbb,0xb6000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x000002ee,0xeeeeeeee,0xee140000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x006bbbbb,0xbbb90000,0x000008bb,0xbbbbbbb5,0x00000000,
+0x00abbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xb60005bb,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbbbbbb,0xbbbb9000,0x09bbbbbb,0xbbbbbbbb,0xbbbbbb9c,0x00000008,0xbbbbbbbb,
+0xbd000000,0x00000000,0x00000000,0x00000005,0x9bbbbbbb,0xbbbbbbbb,0xbbbbbb00,
+0x00005bbb,0xbbbbbb80,0x00cbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xb9000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0002eeee,0xeeeeeeee,
+0xeeee7000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00cbbbbb,
+0xbbbb8000,0x000000bb,0xbbbbbbb6,0x00000000,0x008bbbbb,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbbbbbb,0xb60008bb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbd000,0x0bbbbbbb,
+0xbbbbbbbb,0xbbb96800,0x00000000,0xbbbbbbbb,0xbb000000,0x00000000,0x00000000,
+0x00000000,0x00cd9bbb,0xbbbbbbbb,0xbbbbbb80,0x00000bbb,0xbbbbbbc0,0x000bbbbb,
+0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbd000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x001eeeee,0xeeeeeeee,0xeeeeee40,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x008bbbbb,0xbbbb5000,0x0000009b,0xbbbbbbbb,
+0x00000000,0x0009bbbb,0xbbbb5888,0x88888888,0xcbbbbbbb,0xbd0000db,0xbbbbbbbc,
+0x88888888,0x8885bbbb,0xbbbb9000,0x0bbbbbbb,0xbbbbbb96,0xc8000000,0x00000000,
+0x6bbbbbbb,0xbbc00000,0x00000000,0x00000000,0x00000000,0x0000045c,0x69bbbbbb,
+0xbbbbbbc0,0x000009bb,0xbbbbbb60,0x000dbbbb,0xbbbbc888,0x88888888,0x5bbbbbbb,
+0xb9000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0047eeee,
+0xeeeeeeee,0xeeeeeee1,0x40000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x000bbbbb,0xbbbba000,0x000000db,0xbbbbbbbb,0xd0000000,0x000cbbbb,0xbbbb6000,
+0x00000000,0x8bbbbbbb,0xb600005b,0xbbbbbbbd,0x00000000,0x0008bbbb,0xbbbbd000,
+0x0bbbbbbb,0xbbb9c000,0x00000000,0x00000000,0x8bbbbbbb,0xbb900000,0x0000000d,
+0x50000000,0x00000000,0x00000000,0x00008dbb,0xbbbbbb60,0x00000dbb,0xbbbbbb90,
+0x0005bbbb,0xbbbbd000,0x00000000,0x8bbbbbbb,0xbd000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x000041ee,0xeeeeeeee,0xeeeeeeee,0xe2000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x0009bbbb,0xbbbbd000,0x000000cb,
+0xbbbbbbbb,0xb9500000,0x00009bbb,0xbbbbb800,0x00000000,0x5bbbbbbb,0xb6000009,
+0xbbbbbbbb,0x50000000,0x0008bbbb,0xbbbbd000,0x0dbbbbbb,0xbb980000,0x00000000,
+0x00000000,0x06bbbbbb,0xbbbd0000,0x0000004b,0xb9800000,0x00000000,0x00000000,
+0x00000cbb,0xbbbbbbd0,0x00000abb,0xbbbbbbb0,0x00009bbb,0xbbbbb500,0x00000000,
+0x8bbbbbbb,0xbd000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00043000,
+0x0000002e,0xeeeeeeee,0xeeeeeeee,0xee120000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x000dbbbb,0xbbbb9000,0x0000008b,0xbbbbbbbb,0xbbb9da58,0x0000cbbb,
+0xbbbbb980,0x00000000,0xdbbbbbbb,0xbc000005,0xbbbbbbbb,0xb0000000,0x0006bbbb,
+0xbbbba000,0x0cbbbbbb,0xbbd00000,0x000000cb,0x50000000,0x08bbbbbb,0xbbbb5000,
+0x0000006b,0xbbb60000,0x0006bbbb,0xbbbb6000,0x000008bb,0xbbbbbbb0,0x000005bb,
+0xbbbbbbb8,0x00005bbb,0xbbbbb980,0x00000000,0x6bbbbbbb,0xba000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x043fff30,0x00000000,0x1eeeeeee,0xeeeeeeee,
+0xeeee1400,0x00000000,0x00000000,0x00000000,0x00000000,0x000cbbbb,0xbbbbb000,
+0x0000000b,0xbbbbbbbb,0xbbbbbbbb,0xb50009bb,0xbbbbbb98,0x00000005,0xbbbbbbbb,
+0xb8000000,0xdbbbbbbb,0xbb800000,0x005bbbbb,0xbbbb5000,0x04bbbbbb,0xbbb00000,
+0x000006bb,0xbd800000,0x00cbbbbb,0xbbbbb600,0x00000cbb,0xbbbbb500,0x0005bbbb,
+0xbbbbb400,0x000000bb,0xbbbbbbb4,0x000004bb,0xbbbbbbbc,0x00000dbb,0xbbbbbb95,
+0x00000008,0xbbbbbbbb,0xb5000000,0x00000000,0x00000000,0x00000000,0x00000004,
+0x3fffffff,0x40000000,0x04eeeeee,0xeeeeeeee,0xeeeeee40,0x00000000,0x00000000,
+0x00000000,0x00000008,0x888cbbbb,0xbbbbbc88,0x88800009,0xbbbbbbbb,0xbbbbbbbb,
+0xba0008bb,0xbbbbbbbb,0x680008ab,0xbbbbbbbb,0x90000000,0x89bbbbbb,0xbbb68000,
+0x0cbbbbbb,0xbbbb0000,0x006bbbbb,0xbbb95000,0x0056bbbb,0xbbb60000,0x0009bbbb,
+0xbbbbbbb6,0x588c9bbb,0xbbbbbb90,0x0000bbbb,0xbbbbbd00,0x000005bb,0xbbbbbbb8,
+0x0000009b,0xbbbbbbb6,0x000000bb,0xbbbbbbbb,0x680000cb,0xbbbbbbbb,0xb0000000,
+0x00000000,0x00000000,0x00000000,0x0000043f,0xffffffff,0xf3000000,0x0002eeee,
+0xeeeeeeee,0xeeee7000,0x00000000,0x00000000,0x00000000,0x0000000b,0xbbbbbbbb,
+0xbbbbbbbb,0xbbb5000d,0xbbbbbbbb,0xbbbbbbbb,0xbd0000cb,0xbbbbbbbb,0xbb999bbb,
+0xbbbbbbbb,0x60000000,0x05bbbbbb,0xbbbbbb99,0xbbbbbbbb,0xbbbd0000,0x008bbbbb,
+0xbbbbbb99,0xbbbbbbbb,0xbbbb9c00,0x00009bbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbb90,
+0x0000cbbb,0xbbbbbb98,0x000089bb,0xbbbbbbb8,0x0000009b,0xbbbbbbb9,0x0000005b,
+0xbbbbbbbb,0xbbb99bbb,0xbbbbbbbb,0xd0000000,0x00000000,0x00000000,0x00000000,
+0x00003fff,0xffffffff,0xfff30000,0x000001ee,0xeeeeeeee,0xee140000,0x00000000,
+0x00000000,0x00000000,0x00000009,0xbbbbbbbb,0xbbbbbbbb,0xbbbc000a,0xbbbbbbbb,
+0xbbbbbbbb,0xb9000006,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0x40000000,0x00abbbbb,
+0xbbbbbbbb,0xbbbbbbbb,0xbbb80000,0x0005bbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbd0,
+0x00008bbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbb50,0x000009bb,0xbbbbbbbb,0x9d99bbbb,
+0xbbbbbbb0,0x0000006b,0xbbbbbbbb,0x00000005,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,
+0x80000000,0x00000000,0x00000000,0x00000000,0x003fffff,0xffffffff,0xfffff400,
+0x00000041,0xeeeeeeee,0x14000000,0x00000000,0x00000000,0x00000000,0x00000006,
+0xbbbbbbbb,0xbbbbbbbb,0xbbb60008,0xbbbbbbbb,0xbbbbbbbb,0xbb000000,0x6bbbbbbb,
+0xbbbbbbbb,0xbbbbbbbc,0x00000000,0x000abbbb,0xbbbbbbbb,0xbbbbbbbb,0xbb600000,
+0x00005bbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbb50,0x0000049b,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbbbd00,0x000008bb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbb90,0x0000005b,0xbbbbbbbb,
+0x80000000,0x5bbbbbbb,0xbbbbbbbb,0xbbbbbbb6,0x00005050,0x50500000,0x00000000,
+0x00000000,0x04ffffff,0xffffffff,0xffffff30,0x00000000,0x2eeeee14,0x00000000,
+0x00004400,0x00000000,0x00000000,0x0000000c,0xbbbbbbbb,0xbbbbbbbb,0xbbb90000,
+0xbbbbbbbb,0xbdbbbbbb,0xbb500000,0x05bbbbbb,0xbbbbbbbb,0xbbbbbb90,0x00000000,
+0x00005bbb,0xbbbbbbbb,0xbbbbbbbb,0xb9000000,0x000005bb,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbb9000,0x0000000d,0xbbbbbbbb,0xbbbbbbbb,0xbbbb9000,0x0000005b,0xbbbbbbbb,
+0xbbbbbbbb,0xbbbbbb50,0x0000008b,0xbbbbbbbb,0x50000000,0x05bbbbbb,0xbbbbbbbb,
+0xbbbbbb90,0x0008c068,0x98d00000,0x00000000,0x00000000,0x0004ffff,0xffffffff,
+0xffffffff,0x30000000,0x047e1400,0x00000000,0x0043ff34,0x00000000,0x00000000,
+0x00000008,0xbbbbbbbb,0xbbbbbbbb,0xbbbb0000,0x9bbbbbbb,0xb60a9bbb,0xbbc00000,
+0x008dbbbb,0xbbbbbbbb,0xbbbbbd00,0x00000000,0x000000db,0xbbbbbbbb,0xbbbbbbbb,
+0xd8000000,0x0000008d,0xbbbbbbbb,0xbbbbbbbb,0xbb950000,0x00000000,0x59bbbbbb,
+0xbbbbbbbb,0xbbbd0000,0x00000004,0xdbbbbbbb,0xbbbbbbbb,0xbbbbbc00,0x00000009,
+0xbbbbbbbb,0x60000000,0x000dbbbb,0xbbbbbbbb,0xbbbbbd00,0x0008a06a,0xccd00000,
+0x00000000,0x00000000,0x000003ff,0xffffffff,0xffffffff,0xff400000,0x00040000,
+0x00000000,0x03ffffff,0x30000000,0x00000000,0x00000000,0xdddddbbb,0xbbbbbb9d,
+0xdddd8000,0xdbbbbbbb,0xb90005db,0xbb600000,0x00005dbb,0xbbbbbbbb,0xbbb95000,
+0x00000000,0x00000008,0xdbbbbbbb,0xbbbbbb9c,0x00000000,0x00000000,0x59bbbbbb,
+0xbbbbbbbb,0x95000000,0x00000000,0x00c9bbbb,0xbbbbbbbb,0xb9500000,0x00000000,
+0x059bbbbb,0xbbbbbbbb,0xbbb95000,0x00000009,0xbbbbbbbb,0xd0000000,0x00008dbb,
+0xbbbbbbbb,0xbbb9a000,0x0008a0dd,0x06d00000,0x00000000,0x00000000,0x00000043,
+0xffffffff,0xffffffff,0xfff34000,0x00000000,0x00000043,0xffffffff,0xff400000,
+0x00000000,0x00000000,0x000009bb,0xbbbbbbd0,0x00000000,0x8c5555c5,0x55000000,
+0x85500000,0x0000008c,0xd9bbbbbb,0x9d500000,0x00000000,0x00000000,0x00cd9bbb,
+0xbbb9d500,0x00000000,0x00000000,0x004cd9bb,0xbbbb9dc0,0x00000000,0x00000000,
+0x00005cdb,0xbbbbbb9a,0x50000000,0x00000000,0x0008cdbb,0xbbbbbbb9,0xda800000,
+0x00000006,0xbbbbbbbb,0xb0000000,0x0000000c,0xd9bbbbbb,0x9dc00000,0x0086dc6c,
+0x0cd00000,0x00000000,0x00000000,0x00000000,0x4fffffff,0xffffffff,0xfffff300,
+0x00000000,0x000003ff,0xffffffff,0xffff0000,0x00000000,0x00000000,0x00000dbb,
+0xbbbbbb90,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00008840,
+0x00000000,0x00000000,0x00000000,0x00000008,0x84000000,0x00000000,0x00000000,
+0x00000000,0x88400000,0x00000000,0x00000000,0x00000000,0x08880000,0x00000000,
+0x00000000,0x00000000,0x08888000,0x00000000,0x0000000c,0xbbbbbbbb,0xb8000000,
+0x00000000,0x00008880,0x00000000,0x00888480,0x00800000,0x00000000,0x00000000,
+0x00000000,0x003fffff,0xffffffff,0xfffff400,0x00000000,0x0003ffff,0xffffffff,
+0xfffff300,0x00000000,0x00000000,0x00000abb,0xbbbbbbb8,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000008,0xbbbbbbbb,0xb5000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00043fff,0xffffffff,
+0xfff30000,0x00000000,0x003fffff,0xffffffff,0xfffffff4,0x00000000,0x00000000,
+0x000005bb,0xbbbbbbbb,0x58040000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0xbbbbbbbb,
+0xba000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x000004ff,0xffffffff,0xf3000000,0x00000000,0x00003fff,
+0xffffffff,0xffffffff,0x30000000,0x00000000,0x000000bb,0xbbbbbbbb,0xbbbbb500,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0xdbbbbbbb,0xbd000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000003,
+0xfffffff3,0x00000000,0x00000000,0x000004ff,0xffffffff,0xffffffff,0xff300000,
+0x00000000,0x000000db,0xbbbbbbbb,0xbbbbba00,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x6bbbbbbb,0xb9000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x43fff340,0x00000000,0x00021100,
+0x00000003,0xffffffff,0xffffffff,0xffff4000,0x00000000,0x0000008b,0xbbbbbbbb,
+0xbbbbbd00,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0xcbbbbbbb,0xbb800000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00430000,0x00000000,0x021eeee2,0x00000000,0x03ffffff,0xffffffff,
+0xfffff300,0x00000000,0x0000000d,0xbbbbbbbb,0xbbbbb900,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x8bbbbbbb,0xbb500000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000004,
+0x1eeeeeee,0x14000000,0x004fffff,0xffffffff,0xffffff30,0x00000000,0x00000000,
+0x9bbbbbbb,0xbbbbbb00,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0bbbbbbb,0xbba00000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x0000041e,0xeeeeeeee,0xee100000,0x00003fff,
+0xffffffff,0xffff3000,0x00000000,0x00000000,0x0dbbbbbb,0xbbbbbb50,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x09bbbbbb,0xbbd00000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00047eee,0xeeeeeeee,0xeeee2000,0x0000003f,0xffffffff,0xff300000,0x00000000,
+0x00000000,0x0059bbbb,0xbbbbbbc0,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x06bbbbbb,
+0xbb900000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x007eeeee,0xeeeeeeee,0xeeeee140,
+0x00000004,0xffffffff,0x30000000,0x00000000,0x00000000,0x00004c66,0xd66a5800,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00808480,0x84800000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x0041eeee,0xeeeeeeee,0xeeeeeee7,0x00000000,0x03ffff34,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00002eee,0xeeeeeeee,
+0xeeeeeeee,0xe2000000,0x004f3400,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x0000007e,0xeeeeeeee,0xeeeeeeee,0xee140000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000004,
+0x1eeeeeee,0xeeeeeeee,0xeeee7000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x02eeeeee,0xeeeeeeee,0xeeeeee40,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x0007eeee,0xeeeeeeee,0xeeeee400,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x000041ee,0xeeeeeeee,
+0xeee20000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x0000002e,0xeeeeeeee,0xe2000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x7eeeeee2,0x00000000,0x00000400,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x041ee700,0x00000000,0x0003ff30,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00040000,0x00000000,0x04ffffff,0x40000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000004,
+0xffffffff,0xff400000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x000004ff,0xffffffff,0xfff30000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x0004ffff,0xffffffff,0xfffff400,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x004fffff,0xffffffff,0xfffffff4,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00043fff,0xffffffff,0xffffffff,0x30000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x000004ff,0xffffffff,
+0xffffffff,0xff400000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00047700,0x00000003,0xffffffff,0xffffffff,0xffff4000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x001eeee4,0x00000000,
+0x4fffffff,0xffffffff,0xfffff300,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x7eeeeeee,0x14000000,0x004fffff,0xffffffff,0xffffff30,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0000007e,0xeeeeeeee,
+0xee200000,0x00003fff,0xffffffff,0xffff3400,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00002eee,0xeeeeeeee,0xeeee4000,0x000004ff,0xffffffff,
+0xfff40000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x002eeeee,
+0xeeeeeeee,0xeeeee140,0x00000004,0xffffffff,0xf4000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x0041eeee,0xeeeeeeee,0xeeeeeee7,0x00000000,
+0x43fffff4,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00002eee,0xeeeeeeee,0xeeeeeeee,0x12000000,0x004ff400,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00004000,0x0000007e,0xeeeeeeee,0xeeeeeeee,
+0xee100000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x004fff40,0x00000004,0x1eeeeeee,0xeeeeeeee,0xeeee7000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x4ffffff3,0x00000000,0x02eeeeee,
+0xeeeeeeee,0xeeeeee40,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000043,0xffffffff,0xf3000000,0x0001eeee,0xeeeeeeee,0xeeeee200,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x000043ff,0xffffffff,0xfff40000,
+0x00004eee,0xeeeeeeee,0xeee70000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x0043ffff,0xffffffff,0xffff3400,0x0000002e,0xeeeeeeee,0xe7400000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00ffffff,0xffffffff,
+0xffffff30,0x00000000,0x1eeeeee7,0x40000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x0003ffff,0xffffffff,0xffffffff,0x40000000,0x04eee140,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x000003ff,
+0xffffffff,0xffffffff,0xf3000000,0x00024000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x0000004f,0xffffffff,0xffffffff,0xfff30000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x3fffffff,0xffffffff,0xfffff400,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00ffffff,0xffffffff,
+0xfffff300,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x0004ffff,0xffffffff,0xffff3000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x000003ff,
+0xffffffff,0xff400000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x0000004f,0xffffffff,0x30000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x4fffff30,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x003f3000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x0000babe
+};