[BUILD] conditionally compile common/cmd_*.c in common/Makefile

Modify common/Makefile to conditionally compile the cmd_*.c files based
on the board config.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

common/Makefile

@@ -33,53 +33,61 @@ COBJS-y += altera.o
 COBJS-y += bedbug.o
 COBJS-y += circbuf.o
 COBJS-y += cmd_autoscript.o
-COBJS-y += cmd_bdinfo.o
+COBJS-$(CONFIG_CMD_BDI) += cmd_bdinfo.o
-COBJS-y += cmd_bedbug.o
+COBJS-$(CONFIG_CMD_BEDBUG) += cmd_bedbug.o
-COBJS-y += cmd_bmp.o
+COBJS-$(CONFIG_CMD_BMP) += cmd_bmp.o
 COBJS-y += cmd_boot.o
 COBJS-y += cmd_bootm.o
-COBJS-y += cmd_cache.o
+COBJS-$(CONFIG_CMD_CACHE) += cmd_cache.o
-COBJS-y += cmd_console.o
+COBJS-$(CONFIG_CMD_CONSOLE) += cmd_console.o
-COBJS-y += cmd_date.o
+COBJS-$(CONFIG_CMD_DATE) += cmd_date.o
-COBJS-y += cmd_dcr.o
+ifdef CONFIG_4xx
-COBJS-y += cmd_diag.o
+COBJS-$(CONFIG_CMD_SETGETDCR) += cmd_dcr.o
-COBJS-y += cmd_display.o
+endif
-COBJS-y += cmd_doc.o
+ifdef CONFIG_POST
-COBJS-y += cmd_dtt.o
+COBJS-$(CONFIG_CMD_DIAG) += cmd_diag.o
+endif
+COBJS-$(CONFIG_CMD_DISPLAY) += cmd_display.o
+COBJS-$(CONFIG_CMD_DOC) += cmd_doc.o
+COBJS-$(CONFIG_CMD_DTT) += cmd_dtt.o
 COBJS-y += cmd_eeprom.o
-COBJS-y += cmd_elf.o
+COBJS-$(CONFIG_CMD_ELF) += cmd_elf.o
-COBJS-y += cmd_ext2.o
+COBJS-$(CONFIG_CMD_EXT2) += cmd_ext2.o
-COBJS-y += cmd_fat.o
+COBJS-$(CONFIG_CMD_FAT) += cmd_fat.o
 COBJS-y += cmd_fdc.o
-COBJS-y += cmd_fdt.o
+COBJS-$(CONFIG_OF_LIBFDT) += cmd_fdt.o
-COBJS-y += cmd_fdos.o
+COBJS-$(CONFIG_CMD_FDOS) += cmd_fdos.o
-COBJS-y += cmd_flash.o
+COBJS-$(CONFIG_CMD_FLASH) += cmd_flash.o
-COBJS-y += cmd_fpga.o
+ifdef CONFIG_FPGA
-COBJS-y += cmd_i2c.o
+COBJS-$(CONFIG_CMD_FPGA) += cmd_fpga.o
-COBJS-y += cmd_ide.o
+endif
-COBJS-y += cmd_immap.o
+COBJS-$(CONFIG_CMD_I2C) += cmd_i2c.o
-COBJS-y += cmd_itest.o
+COBJS-$(CONFIG_CMD_IDE) += cmd_ide.o
-COBJS-y += cmd_jffs2.o
+COBJS-$(CONFIG_CMD_IMMAP) += cmd_immap.o
+COBJS-$(CONFIG_CMD_ITEST) += cmd_itest.o
+COBJS-$(CONFIG_CMD_JFFS2) += cmd_jffs2.o
 COBJS-y += cmd_load.o
-COBJS-y += cmd_log.o
+COBJS-$(CONFIG_LOGBUFFER) += cmd_log.o
 COBJS-y += cmd_mem.o
-COBJS-y += cmd_mii.o
+COBJS-$(CONFIG_CMD_MII) += cmd_mii.o
-COBJS-y += cmd_misc.o
+COBJS-$(CONFIG_CMD_MISC) += cmd_misc.o
-COBJS-y += cmd_mmc.o
+COBJS-$(CONFIG_CMD_MMC) += cmd_mmc.o
 COBJS-y += cmd_nand.o
-COBJS-y += cmd_net.o
+COBJS-$(CONFIG_CMD_NET) += cmd_net.o
 COBJS-y += cmd_nvedit.o
 COBJS-y += cmd_onenand.o
-COBJS-y += cmd_pci.o
+ifdef CONFIG_PCI
+COBJS-$(CONFIG_CMD_PCI) += cmd_pci.o
+endif
 COBJS-y += cmd_pcmcia.o
-COBJS-y += cmd_portio.o
+COBJS-$(CONFIG_CMD_PORTIO) += cmd_portio.o
-COBJS-y += cmd_reginfo.o
+COBJS-$(CONFIG_CMD_REGINFO) += cmd_reginfo.o
-COBJS-y += cmd_reiser.o
+COBJS-$(CONFIG_CMD_REISER) += cmd_reiser.o
 COBJS-y += cmd_sata.o
-COBJS-y += cmd_scsi.o
+COBJS-$(CONFIG_CMD_SCSI) += cmd_scsi.o
-COBJS-y += cmd_spi.o
+COBJS-$(CONFIG_CMD_SPI) += cmd_spi.o
-COBJS-y += cmd_universe.o
+COBJS-$(CONFIG_CMD_UNIVERSE) += cmd_universe.o
-COBJS-y += cmd_usb.o
+COBJS-$(CONFIG_CMD_USB) += cmd_usb.o
 COBJS-y += cmd_vfd.o
 COBJS-y += command.o
 COBJS-y += console.o
@@ -123,7 +131,7 @@ COBJS-y += xilinx.o
 COBJS-y += crc16.o
 COBJS-y += xyzModem.o
 COBJS-y += cmd_mac.o
-COBJS-y += cmd_mfsl.o
+COBJS-$(CONFIG_CMD_MFSL) += cmd_mfsl.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(AOBJS:.o=.S) $(COBJS:.o=.c)

common/cmd_bdinfo.c

@@ -30,7 +30,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_CMD_BDI)
 static void print_num(const char *, ulong);
 
 #ifndef CONFIG_ARM	/* PowerPC and other */
@@ -350,4 +349,3 @@ U_BOOT_CMD(
 	"bdinfo  - print Board Info structure\n",
 	NULL
 );
-#endif

common/cmd_bedbug.c

@@ -13,8 +13,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_CMD_BEDBUG)
-
 #ifndef MAX
 #define MAX(a,b) ((a) > (b) ? (a) : (b))
 #endif
@@ -413,7 +411,6 @@ int do_bedbug_rdump (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD (rdump, 1, 1, do_bedbug_rdump,
 	    "rdump   - Show registers.\n", " - Show registers.\n");
 /* ====================================================================== */
-#endif
 
 
 /*

common/cmd_bmp.c

@@ -31,8 +31,6 @@
 #include <asm/byteorder.h>
 #include <malloc.h>
 
-#if defined(CONFIG_CMD_BMP)
-
 static int bmp_info (ulong addr);
 static int bmp_display (ulong addr, int x, int y);
 
@@ -187,5 +185,3 @@ static int bmp_display(ulong addr, int x, int y)
 # error bmp_display() requires CONFIG_LCD or CONFIG_VIDEO
 #endif
 }
-
-#endif /* defined(CONFIG_CMD_BMP) */

common/cmd_console.c

@@ -28,8 +28,6 @@
 #include <command.h>
 #include <devices.h>
 
-#if defined(CONFIG_CMD_CONSOLE)
-
 extern void _do_coninfo (void);
 int do_coninfo (cmd_tbl_t * cmd, int flag, int argc, char *argv[])
 {
@@ -67,5 +65,3 @@ U_BOOT_CMD(
 	"coninfo - print console devices and information\n",
 	""
 );
-
-#endif

common/cmd_date.c

@@ -31,8 +31,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_CMD_DATE)
-
 const char *weekdays[] = {
 	"Sun", "Mon", "Tues", "Wednes", "Thurs", "Fri", "Satur",
 };
@@ -210,5 +208,3 @@ U_BOOT_CMD(
 	"  - with numeric argument: set the system date & time\n"
 	"  - with 'reset' argument: reset the RTC\n"
 );
-
-#endif

common/cmd_dcr.c

@@ -29,8 +29,6 @@
 #include <config.h>
 #include <command.h>
 
-#if defined(CONFIG_4xx) && defined(CONFIG_CMD_SETGETDCR)
-
 unsigned long get_dcr (unsigned short);
 unsigned long set_dcr (unsigned short, unsigned long);
 
@@ -245,5 +243,3 @@ U_BOOT_CMD(
 	"setidcr - Set a register value via indirect DCR addressing\n",
 	"adr_dcrn[.dat_dcrn] offset value - write offset to adr_dcrn, write value to dat_dcrn.\n"
 );
-
-#endif

common/cmd_diag.c

@@ -28,8 +28,6 @@
 #include <command.h>
 #include <post.h>
 
-#if defined(CONFIG_CMD_DIAG) && defined(CONFIG_POST)
-
 int do_diag (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 	unsigned int i;
@@ -76,5 +74,3 @@ U_BOOT_CMD(
 	"diag run [test1 [test2]]\n"
 	"         - run specified tests\n"
 );
-
-#endif

common/cmd_display.c

@@ -24,8 +24,6 @@
 #include <common.h>
 #include <command.h>
 
-#if defined(CONFIG_CMD_DISPLAY)
-
 #undef DEBUG_DISP
 
 #define DISP_SIZE	8
@@ -78,5 +76,3 @@ U_BOOT_CMD(
 	"    - with <string> argument: display <string> on dot matrix display\n"
 	"    - without arguments: clear dot matrix display\n"
 );
-
-#endif

common/cmd_doc.c

@@ -11,9 +11,6 @@
 #include <command.h>
 #include <malloc.h>
 #include <asm/io.h>
-
-#if defined(CONFIG_CMD_DOC)
-
 #include <linux/mtd/nftl.h>
 #include <linux/mtd/doc2000.h>
 
@@ -1607,5 +1604,3 @@ void doc_probe(unsigned long physadr)
 		puts ("No DiskOnChip found\n");
 	}
 }
-
-#endif

common/cmd_dtt.c

@@ -25,8 +25,6 @@
 #include <config.h>
 #include <command.h>
 
-#if defined(CONFIG_CMD_DTT)
-
 #include <dtt.h>
 #include <i2c.h>
 
@@ -60,5 +58,3 @@ U_BOOT_CMD(
 	  "dtt     - Digital Thermometer and Thermostat\n",
 	  "        - Read temperature from digital thermometer and thermostat.\n"
 );
-
-#endif

common/cmd_elf.c

@@ -23,8 +23,6 @@
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
-#if defined(CONFIG_CMD_ELF)
-
 #ifndef MAX
 #define MAX(a,b) ((a) > (b) ? (a) : (b))
 #endif
@@ -323,5 +321,3 @@ U_BOOT_CMD(
 	"bootvx  - Boot vxWorks from an ELF image\n",
 	" [address] - load address of vxWorks ELF image.\n"
 );
-
-#endif

common/cmd_ext2.c

@@ -34,8 +34,6 @@
  */
 #include <common.h>
 #include <part.h>
-
-#if defined(CONFIG_CMD_EXT2)
 #include <config.h>
 #include <command.h>
 #include <image.h>
@@ -259,5 +257,3 @@ U_BOOT_CMD(
 	"    - load binary file 'filename' from 'dev' on 'interface'\n"
 	"      to address 'addr' from ext2 filesystem\n"
 );
-
-#endif

common/cmd_fat.c

@@ -30,11 +30,6 @@
 #include <net.h>
 #include <ata.h>
 #include <part.h>
-
-#if defined(CONFIG_CMD_FAT)
-
-#undef	DEBUG
-
 #include <fat.h>
 
 
@@ -323,5 +318,3 @@ void hexdump (int cnt, unsigned char *data)
 	}
 }
 #endif	/* NOT_IMPLEMENTED_YET */
-
-#endif

common/cmd_fdos.c

@@ -31,8 +31,6 @@
 #include <command.h>
 #include <fdc.h>
 
-#if defined(CONFIG_CMD_FDOS)
-
 /*-----------------------------------------------------------------------------
  * do_fdosboot --
  *-----------------------------------------------------------------------------
@@ -153,5 +151,3 @@ U_BOOT_CMD(
 	"fdosls  - list files in a directory\n",
 	"[directory]\n"
 );
-
-#endif

common/cmd_fdt.c

@@ -28,9 +28,6 @@
 #include <command.h>
 #include <linux/ctype.h>
 #include <linux/types.h>
-
-#ifdef CONFIG_OF_LIBFDT
-
 #include <asm/global_data.h>
 #include <fdt.h>
 #include <libfdt.h>
@@ -692,5 +689,3 @@ U_BOOT_CMD(
 	"          fdt print /cpus \"#address-cells\"\n"
 	"          fdt set   /cpus \"#address-cells\" \"[00 00 00 01]\"\n"
 );
-
-#endif /* CONFIG_OF_LIBFDT */

common/cmd_flash.c

@@ -31,8 +31,6 @@
 #include <dataflash.h>
 #endif
 
-#if defined(CONFIG_CMD_FLASH)
-
 #if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
 #include <jffs2/jffs2.h>
 
@@ -731,5 +729,3 @@ U_BOOT_CMD(
 #undef	TMP_ERASE
 #undef	TMP_PROT_ON
 #undef	TMP_PROT_OFF
-
-#endif

common/cmd_fpga.c

@@ -43,8 +43,6 @@
 #define PRINTF(fmt,args...)
 #endif
 
-#if defined (CONFIG_FPGA) && defined(CONFIG_CMD_FPGA)
-
 /* Local functions */
 static void fpga_usage (cmd_tbl_t * cmdtp);
 static int fpga_get_op (char *opstr);
@@ -321,4 +319,3 @@ U_BOOT_CMD (fpga, 6, 1, do_fpga,
 	    "\tloadb\tLoad device from bitstream buffer (Xilinx devices only)\n"
 	    "\tloadmk\tLoad device generated with mkimage\n"
 	    "\tdump\tLoad device to memory buffer\n");
-#endif

common/cmd_i2c.c

@@ -86,9 +86,6 @@
 #include <i2c.h>
 #include <asm/byteorder.h>
 
-#if defined(CONFIG_CMD_I2C)
-
-
 /* Display values from last command.
  * Memory modify remembered values are different from display memory.
  */
@@ -1024,5 +1021,3 @@ U_BOOT_CMD(
 	"      (valid chip values 50..57)\n"
 );
 #endif
-
-#endif

common/cmd_ide.c

@@ -68,8 +68,6 @@ DECLARE_GLOBAL_DATA_PTR;
 # define SYNC		/* nothing */
 #endif
 
-#if defined(CONFIG_CMD_IDE)
-
 #ifdef CONFIG_IDE_8xx_DIRECT
 /* Timings for IDE Interface
  *
@@ -2081,5 +2079,3 @@ U_BOOT_CMD(
 	"diskboot- boot from IDE device\n",
 	"loadAddr dev:part\n"
 );
-
-#endif

common/cmd_immap.c

@@ -28,8 +28,7 @@
 #include <common.h>
 #include <command.h>
 
-#if defined(CONFIG_CMD_IMMAP) && \
+#if defined(CONFIG_8xx) || defined(CONFIG_8260)
-    (defined(CONFIG_8xx) || defined(CONFIG_8260))
 
 #if defined(CONFIG_8xx)
 #include <asm/8xx_immap.h>
@@ -41,9 +40,7 @@
 #include <asm/iopin_8260.h>
 #endif
 
-#if defined(CONFIG_8xx) || defined(CONFIG_8260)
 DECLARE_GLOBAL_DATA_PTR;
-#endif
 
 static void
 unimplemented ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])

common/cmd_itest.c

@@ -32,8 +32,6 @@
 #include <config.h>
 #include <command.h>
 
-#if defined(CONFIG_CMD_ITEST)
-
 #define EQ	0
 #define NE	1
 #define LT	2
@@ -197,4 +195,3 @@ U_BOOT_CMD(
 	"itest\t- return true/false on integer compare\n",
 	"[.b, .w, .l, .s] [*]value1 <op> [*]value2\n"
 );
-#endif

common/cmd_jffs2.c

@@ -93,9 +93,6 @@
 #include <jffs2/jffs2.h>
 #include <linux/list.h>
 #include <linux/ctype.h>
-
-#if defined(CONFIG_CMD_JFFS2)
-
 #include <cramfs/cramfs_fs.h>
 
 #if defined(CONFIG_CMD_NAND)
@@ -2191,5 +2188,3 @@ U_BOOT_CMD(
 #endif /* #ifdef CONFIG_JFFS2_CMDLINE */
 
 /***************************************************/
-
-#endif

common/cmd_log.c

@@ -48,8 +48,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_LOGBUFFER)
-
 /* Local prototypes */
 static void logbuff_putc (const char c);
 static void logbuff_puts (const char *s);
@@ -287,5 +285,3 @@ static int logbuff_printk(const char *line)
 	}
 	return i;
 }
-
-#endif /* (CONFIG_LOGBUFFER) */

common/cmd_mfsl.c

@@ -29,8 +29,6 @@
 #include <common.h>
 #include <config.h>
 #include <command.h>
-
-#if defined(CONFIG_CMD_MFSL)
 #include <asm/asm.h>
 
 int do_frd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
@@ -413,5 +411,3 @@ U_BOOT_CMD (rspr, 3, 1, do_rspr,
 		" 1 - MSR - Machine status register\n"
 		" 3 - EAR - Exception address register\n"
 		" 5 - ESR - Exception status register\n");
-
-#endif

common/cmd_mii.c

@@ -27,8 +27,6 @@
 
 #include <common.h>
 #include <command.h>
-
-#if defined(CONFIG_CMD_MII)
 #include <miiphy.h>
 
 #ifdef CONFIG_TERSE_MII
@@ -598,5 +596,3 @@ U_BOOT_CMD(
 );
 
 #endif /* CONFIG_TERSE_MII */
-
-#endif

common/cmd_misc.c

@@ -27,8 +27,6 @@
 #include <common.h>
 #include <command.h>
 
-#if defined(CONFIG_CMD_MISC)
-
 int do_sleep (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	ulong start = get_timer(0);
@@ -68,5 +66,3 @@ U_BOOT_CMD(
 	"N\n"
 	"    - delay execution for N seconds (N is _decimal_ !!!)\n"
 );
-
-#endif

common/cmd_mmc.c

@@ -23,9 +23,6 @@
 
 #include <common.h>
 #include <command.h>
-
-#if defined(CONFIG_CMD_MMC)
-
 #include <mmc.h>
 
 int do_mmc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -42,5 +39,3 @@ U_BOOT_CMD(
 	"mmcinit - init mmc card\n",
 	NULL
 );
-
-#endif

common/cmd_net.c

@@ -28,8 +28,6 @@
 #include <command.h>
 #include <net.h>
 
-#if defined(CONFIG_CMD_NET)
-
 extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
 
 static int netboot_common (proto_t, cmd_tbl_t *, int , char *[]);
@@ -343,5 +341,3 @@ U_BOOT_CMD(
 	"[NTP server IP]\n"
 );
 #endif
-
-#endif

common/cmd_pci.c

@@ -30,16 +30,11 @@
  */
 
 #include <common.h>
-
-#ifdef CONFIG_PCI
-
 #include <command.h>
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <pci.h>
 
-#if defined(CONFIG_CMD_PCI)
-
 extern int cmd_get_data_size(char* arg, int default_size);
 
 unsigned char	ShortPCIListing = 1;
@@ -564,7 +559,3 @@ U_BOOT_CMD(
 	"pci write[.b, .w, .l] b.d.f address value\n"
 	"    - write to CFG address\n"
 );
-
-#endif
-
-#endif /* CONFIG_PCI */

common/cmd_portio.c

@@ -30,8 +30,6 @@
 #include <common.h>
 #include <command.h>
 
-#if defined(CONFIG_CMD_PORTIO)
-
 extern int cmd_get_data_size (char *arg, int default_size);
 
 /* Display values from last command.
@@ -165,5 +163,3 @@ U_BOOT_CMD(
 	"[.b, .w, .l] port\n"
 	"    - read datum from IO port\n"
 );
-
-#endif

common/cmd_reginfo.c

@@ -33,8 +33,6 @@
 #include <mpc5xxx.h>
 #endif
 
-#if defined(CONFIG_CMD_REGINFO)
-
 int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 #if defined(CONFIG_8xx)
@@ -335,9 +333,6 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return 0;
 }
 
-#endif
-
-
  /**************************************************/
 
 #if ( defined(CONFIG_8xx)   || defined(CONFIG_405GP) || \

common/cmd_reiser.c

@@ -27,8 +27,6 @@
  * Reiserfs support
  */
 #include <common.h>
-
-#if defined(CONFIG_CMD_REISER)
 #include <config.h>
 #include <command.h>
 #include <image.h>
@@ -239,5 +237,3 @@ U_BOOT_CMD(
 	"    - load binary file 'filename' from 'dev' on 'interface'\n"
 	"      to address 'addr' from dos filesystem\n"
 );
-
-#endif

common/cmd_scsi.c

@@ -34,8 +34,6 @@
 #include <image.h>
 #include <pci.h>
 
-#if defined(CONFIG_CMD_SCSI)
-
 #ifdef CONFIG_SCSI_SYM53C8XX
 #define SCSI_VEND_ID	0x1000
 #ifndef CONFIG_SCSI_DEV_ID
@@ -611,5 +609,3 @@ U_BOOT_CMD(
 	"scsiboot- boot from SCSI device\n",
 	"loadAddr dev:part\n"
 );
-
-#endif

common/cmd_spi.c

@@ -29,8 +29,6 @@
 #include <command.h>
 #include <spi.h>
 
-#if defined(CONFIG_CMD_SPI)
-
 /*-----------------------------------------------------------------------
  * Definitions
  */
@@ -139,5 +137,3 @@ U_BOOT_CMD(
 	"<bit_len> - Number of bits to send (base 10)\n"
 	"<dout>    - Hexadecimal string that gets sent\n"
 );
-
-#endif

common/cmd_universe.c

@@ -28,8 +28,6 @@
 
 #include <universe.h>
 
-#if defined(CONFIG_CMD_UNIVERSE)
-
 #define PCI_VENDOR PCI_VENDOR_ID_TUNDRA
 #define PCI_DEVICE PCI_DEVICE_ID_TUNDRA_CA91C042
 
@@ -386,5 +384,3 @@ U_BOOT_CMD(
 	"                                      02 -> D16 Data Width\n"
 	"                                      03 -> D32 Data Width\n"
 );
-
-#endif

common/cmd_usb.c

@@ -29,9 +29,6 @@
 #include <command.h>
 #include <asm/byteorder.h>
 #include <part.h>
-
-#if defined(CONFIG_CMD_USB)
-
 #include <usb.h>
 
 #ifdef CONFIG_USB_STORAGE
@@ -608,12 +605,6 @@ int do_usb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return 1;
 }
 
-
-#endif
-
-
-#if defined(CONFIG_CMD_USB)
-
 #ifdef CONFIG_USB_STORAGE
 U_BOOT_CMD(
 	usb,	5,	1,	do_usb,
@@ -645,4 +636,3 @@ U_BOOT_CMD(
 	"usb  info [dev] - show available USB devices\n"
 );
 #endif
-#endif

include/configs/sbc2410x.h

@@ -103,7 +103,6 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
 
 
 #define CONFIG_BOOTDELAY	3

include/configs/smdk2410.h

@@ -88,7 +88,6 @@
 #include <config_cmd_default.h>
 
 #define CONFIG_CMD_CACHE
-#define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_ELF