ARM: imx6: DHCOM i.MX6 PDK: Switch to DM for I2C

This patch enables DM I2C for DHCOM i.MX6 PDK2 boards and
removes non DM I2C code. The I2C EEPROM with ethaddr (MAC)
is defined in the device tree. Use UCLASS_I2C_EEPROM
to find the device by fixed hardware path and read the ethaddr.

Tested with DHCOM i.MX6dl and DHCOM i.MX6q.

Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
This commit is contained in:
Ludwig Zenz 2019-07-08 15:04:58 +02:00 committed by Stefano Babic
parent 86e59530be
commit 4a6f5b4f56
3 changed files with 16 additions and 112 deletions

View file

@ -18,7 +18,6 @@
#include <asm/io.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <asm/mach-imx/sata.h>
#include <ahci.h>
#include <dwc_ahsata.h>
@ -26,7 +25,7 @@
#include <errno.h>
#include <fsl_esdhc_imx.h>
#include <fuse.h>
#include <i2c.h>
#include <i2c_eeprom.h>
#include <miiphy.h>
#include <mmc.h>
#include <net.h>
@ -36,92 +35,6 @@
DECLARE_GLOBAL_DATA_PTR;
#define I2C_PAD_CTRL \
(PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
PAD_CTL_HYS | PAD_CTL_ODE | PAD_CTL_SRE_FAST)
#define EEPROM_I2C_ADDRESS 0x50
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
static struct i2c_pads_info dh6sdl_i2c_pad_info0 = {
.scl = {
.i2c_mode = MX6DL_PAD_EIM_D21__I2C1_SCL | PC,
.gpio_mode = MX6DL_PAD_EIM_D21__GPIO3_IO21 | PC,
.gp = IMX_GPIO_NR(3, 21)
},
.sda = {
.i2c_mode = MX6DL_PAD_EIM_D28__I2C1_SDA | PC,
.gpio_mode = MX6DL_PAD_EIM_D28__GPIO3_IO28 | PC,
.gp = IMX_GPIO_NR(3, 28)
}
};
static struct i2c_pads_info dh6sdl_i2c_pad_info1 = {
.scl = {
.i2c_mode = MX6DL_PAD_KEY_COL3__I2C2_SCL | PC,
.gpio_mode = MX6DL_PAD_KEY_COL3__GPIO4_IO12 | PC,
.gp = IMX_GPIO_NR(4, 12)
},
.sda = {
.i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA | PC,
.gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 | PC,
.gp = IMX_GPIO_NR(4, 13)
}
};
static struct i2c_pads_info dh6sdl_i2c_pad_info2 = {
.scl = {
.i2c_mode = MX6DL_PAD_GPIO_3__I2C3_SCL | PC,
.gpio_mode = MX6DL_PAD_GPIO_3__GPIO1_IO03 | PC,
.gp = IMX_GPIO_NR(1, 3)
},
.sda = {
.i2c_mode = MX6DL_PAD_GPIO_6__I2C3_SDA | PC,
.gpio_mode = MX6DL_PAD_GPIO_6__GPIO1_IO06 | PC,
.gp = IMX_GPIO_NR(1, 6)
}
};
static struct i2c_pads_info dh6dq_i2c_pad_info0 = {
.scl = {
.i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC,
.gpio_mode = MX6Q_PAD_EIM_D21__GPIO3_IO21 | PC,
.gp = IMX_GPIO_NR(3, 21)
},
.sda = {
.i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC,
.gpio_mode = MX6Q_PAD_EIM_D28__GPIO3_IO28 | PC,
.gp = IMX_GPIO_NR(3, 28)
}
};
static struct i2c_pads_info dh6dq_i2c_pad_info1 = {
.scl = {
.i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC,
.gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | PC,
.gp = IMX_GPIO_NR(4, 12)
},
.sda = {
.i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
.gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | PC,
.gp = IMX_GPIO_NR(4, 13)
}
};
static struct i2c_pads_info dh6dq_i2c_pad_info2 = {
.scl = {
.i2c_mode = MX6Q_PAD_GPIO_3__I2C3_SCL | PC,
.gpio_mode = MX6Q_PAD_GPIO_3__GPIO1_IO03 | PC,
.gp = IMX_GPIO_NR(1, 3)
},
.sda = {
.i2c_mode = MX6Q_PAD_GPIO_6__I2C3_SDA | PC,
.gpio_mode = MX6Q_PAD_GPIO_6__GPIO1_IO06 | PC,
.gp = IMX_GPIO_NR(1, 6)
}
};
int dram_init(void)
{
gd->ram_size = imx_ddr_size();
@ -214,6 +127,8 @@ int board_usb_phy_mode(int port)
static int setup_dhcom_mac_from_fuse(void)
{
struct udevice *dev;
ofnode eeprom;
unsigned char enetaddr[6];
int ret;
@ -228,13 +143,19 @@ static int setup_dhcom_mac_from_fuse(void)
return 0;
}
ret = i2c_set_bus_num(2);
eeprom = ofnode_path("/soc/aips-bus@2100000/i2c@21a8000/eeprom@50");
if (!ofnode_valid(eeprom)) {
printf("Invalid hardware path to EEPROM!\n");
return -ENODEV;
}
ret = uclass_get_device_by_ofnode(UCLASS_I2C_EEPROM, eeprom, &dev);
if (ret) {
printf("Error switching I2C bus!\n");
printf("Cannot find EEPROM!\n");
return ret;
}
ret = i2c_read(EEPROM_I2C_ADDRESS, 0xfa, 0x1, enetaddr, 0x6);
ret = i2c_eeprom_read(dev, 0xfa, enetaddr, 0x6);
if (ret) {
printf("Error reading configuration EEPROM!\n");
return ret;
@ -265,18 +186,6 @@ int board_init(void)
/* Enable eim_slow clocks */
setbits_le32(&mxc_ccm->CCGR6, 0x1 << MXC_CCM_CCGR6_EMI_SLOW_OFFSET);
#ifdef CONFIG_SYS_I2C_MXC
if (is_mx6dq()) {
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6dq_i2c_pad_info0);
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6dq_i2c_pad_info1);
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6dq_i2c_pad_info2);
} else {
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6sdl_i2c_pad_info0);
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6sdl_i2c_pad_info1);
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6sdl_i2c_pad_info2);
}
#endif
setup_dhcom_mac_from_fuse();
return 0;

View file

@ -23,7 +23,6 @@ CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_CMD_MEMTEST=y
@ -48,6 +47,10 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_DWC_AHSATA=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MXC=y
CONFIG_MISC=y
CONFIG_I2C_EEPROM=y
CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC_IMX=y
CONFIG_DM_SPI_FLASH=y

View file

@ -48,14 +48,6 @@
#define CONFIG_FEC_MXC_PHYADDR 0
#define CONFIG_ARP_TIMEOUT 200UL
/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000
/* MMC Configs */
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR 0