mirror of
https://github.com/Fishwaldo/u-boot.git
synced 2025-03-21 06:31:31 +00:00
dt-bindings: arm: SCMI bindings documentation
Dump SCMI DT bindings documentation from Linux kernel source tree v5.8-rc1. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Etienne Carriere
Tom Rini
parent
1e35913a26
commit
4e5ce7ecd3
1 changed files with 197 additions and 0 deletions
197
doc/device-tree-bindings/arm/arm,scmi.txt
Normal file
197
doc/device-tree-bindings/arm/arm,scmi.txt
Normal file
|
|
@ -0,0 +1,197 @@
|
|||
System Control and Management Interface (SCMI) Message Protocol
|
||||
----------------------------------------------------------
|
||||
|
||||
The SCMI is intended to allow agents such as OSPM to manage various functions
|
||||
that are provided by the hardware platform it is running on, including power
|
||||
and performance functions.
|
||||
|
||||
This binding is intended to define the interface the firmware implementing
|
||||
the SCMI as described in ARM document number ARM DEN 0056A ("ARM System Control
|
||||
and Management Interface Platform Design Document")[0] provide for OSPM in
|
||||
the device tree.
|
||||
|
||||
Required properties:
|
||||
|
||||
The scmi node with the following properties shall be under the /firmware/ node.
|
||||
|
||||
- compatible : shall be "arm,scmi" or "arm,scmi-smc" for smc/hvc transports
|
||||
- mboxes: List of phandle and mailbox channel specifiers. It should contain
|
||||
exactly one or two mailboxes, one for transmitting messages("tx")
|
||||
and another optional for receiving the notifications("rx") if
|
||||
supported.
|
||||
- shmem : List of phandle pointing to the shared memory(SHM) area as per
|
||||
generic mailbox client binding.
|
||||
- #address-cells : should be '1' if the device has sub-nodes, maps to
|
||||
protocol identifier for a given sub-node.
|
||||
- #size-cells : should be '0' as 'reg' property doesn't have any size
|
||||
associated with it.
|
||||
- arm,smc-id : SMC id required when using smc or hvc transports
|
||||
|
||||
Optional properties:
|
||||
|
||||
- mbox-names: shall be "tx" or "rx" depending on mboxes entries.
|
||||
|
||||
See Documentation/devicetree/bindings/mailbox/mailbox.txt for more details
|
||||
about the generic mailbox controller and client driver bindings.
|
||||
|
||||
The mailbox is the only permitted method of calling the SCMI firmware.
|
||||
Mailbox doorbell is used as a mechanism to alert the presence of a
|
||||
messages and/or notification.
|
||||
|
||||
Each protocol supported shall have a sub-node with corresponding compatible
|
||||
as described in the following sections. If the platform supports dedicated
|
||||
communication channel for a particular protocol, the 3 properties namely:
|
||||
mboxes, mbox-names and shmem shall be present in the sub-node corresponding
|
||||
to that protocol.
|
||||
|
||||
Clock/Performance bindings for the clocks/OPPs based on SCMI Message Protocol
|
||||
------------------------------------------------------------
|
||||
|
||||
This binding uses the common clock binding[1].
|
||||
|
||||
Required properties:
|
||||
- #clock-cells : Should be 1. Contains the Clock ID value used by SCMI commands.
|
||||
|
||||
Power domain bindings for the power domains based on SCMI Message Protocol
|
||||
------------------------------------------------------------
|
||||
|
||||
This binding for the SCMI power domain providers uses the generic power
|
||||
domain binding[2].
|
||||
|
||||
Required properties:
|
||||
- #power-domain-cells : Should be 1. Contains the device or the power
|
||||
domain ID value used by SCMI commands.
|
||||
|
||||
Sensor bindings for the sensors based on SCMI Message Protocol
|
||||
--------------------------------------------------------------
|
||||
SCMI provides an API to access the various sensors on the SoC.
|
||||
|
||||
Required properties:
|
||||
- #thermal-sensor-cells: should be set to 1. This property follows the
|
||||
thermal device tree bindings[3].
|
||||
|
||||
Valid cell values are raw identifiers (Sensor ID)
|
||||
as used by the firmware. Refer to platform details
|
||||
for your implementation for the IDs to use.
|
||||
|
||||
Reset signal bindings for the reset domains based on SCMI Message Protocol
|
||||
------------------------------------------------------------
|
||||
|
||||
This binding for the SCMI reset domain providers uses the generic reset
|
||||
signal binding[5].
|
||||
|
||||
Required properties:
|
||||
- #reset-cells : Should be 1. Contains the reset domain ID value used
|
||||
by SCMI commands.
|
||||
|
||||
SRAM and Shared Memory for SCMI
|
||||
-------------------------------
|
||||
|
||||
A small area of SRAM is reserved for SCMI communication between application
|
||||
processors and SCP.
|
||||
|
||||
The properties should follow the generic mmio-sram description found in [4]
|
||||
|
||||
Each sub-node represents the reserved area for SCMI.
|
||||
|
||||
Required sub-node properties:
|
||||
- reg : The base offset and size of the reserved area with the SRAM
|
||||
- compatible : should be "arm,scmi-shmem" for Non-secure SRAM based
|
||||
shared memory
|
||||
|
||||
[0] http://infocenter.arm.com/help/topic/com.arm.doc.den0056a/index.html
|
||||
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
||||
[2] Documentation/devicetree/bindings/power/power-domain.yaml
|
||||
[3] Documentation/devicetree/bindings/thermal/thermal.txt
|
||||
[4] Documentation/devicetree/bindings/sram/sram.yaml
|
||||
[5] Documentation/devicetree/bindings/reset/reset.txt
|
||||
|
||||
Example:
|
||||
|
||||
sram@50000000 {
|
||||
compatible = "mmio-sram";
|
||||
reg = <0x0 0x50000000 0x0 0x10000>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x0 0x50000000 0x10000>;
|
||||
|
||||
cpu_scp_lpri: scp-shmem@0 {
|
||||
compatible = "arm,scmi-shmem";
|
||||
reg = <0x0 0x200>;
|
||||
};
|
||||
|
||||
cpu_scp_hpri: scp-shmem@200 {
|
||||
compatible = "arm,scmi-shmem";
|
||||
reg = <0x200 0x200>;
|
||||
};
|
||||
};
|
||||
|
||||
mailbox@40000000 {
|
||||
....
|
||||
#mbox-cells = <1>;
|
||||
reg = <0x0 0x40000000 0x0 0x10000>;
|
||||
};
|
||||
|
||||
firmware {
|
||||
|
||||
...
|
||||
|
||||
scmi {
|
||||
compatible = "arm,scmi";
|
||||
mboxes = <&mailbox 0 &mailbox 1>;
|
||||
mbox-names = "tx", "rx";
|
||||
shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
scmi_devpd: protocol@11 {
|
||||
reg = <0x11>;
|
||||
#power-domain-cells = <1>;
|
||||
};
|
||||
|
||||
scmi_dvfs: protocol@13 {
|
||||
reg = <0x13>;
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
scmi_clk: protocol@14 {
|
||||
reg = <0x14>;
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
scmi_sensors0: protocol@15 {
|
||||
reg = <0x15>;
|
||||
#thermal-sensor-cells = <1>;
|
||||
};
|
||||
|
||||
scmi_reset: protocol@16 {
|
||||
reg = <0x16>;
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
cpu@0 {
|
||||
...
|
||||
reg = <0 0>;
|
||||
clocks = <&scmi_dvfs 0>;
|
||||
};
|
||||
|
||||
hdlcd@7ff60000 {
|
||||
...
|
||||
reg = <0 0x7ff60000 0 0x1000>;
|
||||
clocks = <&scmi_clk 4>;
|
||||
power-domains = <&scmi_devpd 1>;
|
||||
resets = <&scmi_reset 10>;
|
||||
};
|
||||
|
||||
thermal-zones {
|
||||
soc_thermal {
|
||||
polling-delay-passive = <100>;
|
||||
polling-delay = <1000>;
|
||||
/* sensor ID */
|
||||
thermal-sensors = <&scmi_sensors0 3>;
|
||||
...
|
||||
};
|
||||
};
|
||||
Loading…
Add table
Reference in a new issue