GitHub-Mirror/u-boot
2
0
Fork 0
mirror of https://github.com/Fishwaldo/u-boot.git synced 2025-03-21 06:31:31 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

STiH410-B2260: Add device tree

Browse source 
This device tree has been extracted from v4.9 kernel

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Patrice Chotard 2017-02-21 13:37:11 +01:00 • committed by Tom Rini
parent 0c56310252
commit 51cb23d452
15 changed files with 3967 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
arch/arm/dts/Makefile
View file

@ -339,6 +339,8 @@ dtb-$(CONFIG_ARCH_BCM283X) += \
dtb-$(CONFIG_ARCH_ASPEED) += ast2500-evb.dtb
dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
targets += $(dtb-y)
# Add any required device tree compiler flags here

71
arch/arm/dts/st-pincfg.h Normal file
View file

@ -0,0 +1,71 @@
#ifndef _ST_PINCFG_H_
#define _ST_PINCFG_H_
/* Alternate functions */
#define ALT1 1
#define ALT2 2
#define ALT3 3
#define ALT4 4
#define ALT5 5
#define ALT6 6
#define ALT7 7
/* Output enable */
#define OE (1 << 27)
/* Pull Up */
#define PU (1 << 26)
/* Open Drain */
#define OD (1 << 25)
#define RT (1 << 23)
#define INVERTCLK (1 << 22)
#define CLKNOTDATA (1 << 21)
#define DOUBLE_EDGE (1 << 20)
#define CLK_A (0 << 18)
#define CLK_B (1 << 18)
#define CLK_C (2 << 18)
#define CLK_D (3 << 18)
/* User-frendly defines for Pin Direction */
/* oe = 0, pu = 0, od = 0 */
#define IN (0)
/* oe = 0, pu = 1, od = 0 */
#define IN_PU (PU)
/* oe = 1, pu = 0, od = 0 */
#define OUT (OE)
/* oe = 1, pu = 0, od = 1 */
#define BIDIR (OE | OD)
/* oe = 1, pu = 1, od = 1 */
#define BIDIR_PU (OE | PU | OD)
/* RETIME_TYPE */
/*
* B Mode
* Bypass retime with optional delay parameter
*/
#define BYPASS (0)
/*
* R0, R1, R0D, R1D modes
* single-edge data non inverted clock, retime data with clk
*/
#define SE_NICLK_IO (RT)
/*
* RIV0, RIV1, RIV0D, RIV1D modes
* single-edge data inverted clock, retime data with clk
*/
#define SE_ICLK_IO (RT | INVERTCLK)
/*
* R0E, R1E, R0ED, R1ED modes
* double-edge data, retime data with clk
*/
#define DE_IO (RT | DOUBLE_EDGE)
/*
* CIV0, CIV1 modes with inverted clock
* Retiming the clk pins will park clock & reduce the noise within the core.
*/
#define ICLK (RT | CLKNOTDATA | INVERTCLK)
/*
* CLK0, CLK1 modes with non-inverted clock
* Retiming the clk pins will park clock & reduce the noise within the core.
*/
#define NICLK (RT | CLKNOTDATA)
#endif /* _ST_PINCFG_H_ */

326
arch/arm/dts/stih407-clock.dtsi Normal file
View file

@ -0,0 +1,326 @@
/*
* Copyright (C) 2014 STMicroelectronics R&D Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <dt-bindings/clock/stih407-clks.h>
/ {
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
/*
* Fixed 30MHz oscillator inputs to SoC
*/
clk_sysin: clk-sysin {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <30000000>;
};
/*
* ARM Peripheral clock for timers
*/
arm_periph_clk: clk-m-a9-periphs {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&clk_m_a9>;
clock-div = <2>;
clock-mult = <1>;
};
/*
* A9 PLL.
*/
clockgen-a9@92b0000 {
compatible = "st,clkgen-c32";
reg = <0x92b0000 0xffff>;
clockgen_a9_pll: clockgen-a9-pll {
#clock-cells = <1>;
compatible = "st,stih407-clkgen-plla9";
clocks = <&clk_sysin>;
clock-output-names = "clockgen-a9-pll-odf";
};
};
/*
* ARM CPU related clocks.
*/
clk_m_a9: clk-m-a9@92b0000 {
#clock-cells = <0>;
compatible = "st,stih407-clkgen-a9-mux";
reg = <0x92b0000 0x10000>;
clocks = <&clockgen_a9_pll 0>,
<&clockgen_a9_pll 0>,
<&clk_s_c0_flexgen 13>,
<&clk_m_a9_ext2f_div2>;
};
/*
* ARM Peripheral clock for timers
*/
clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&clk_s_c0_flexgen 13>;
clock-output-names = "clk-m-a9-ext2f-div2";
clock-div = <2>;
clock-mult = <1>;
};
/*
* Bootloader initialized system infrastructure clock for
* serial devices.
*/
clk_ext2f_a9: clockgen-c0@13 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <200000000>;
clock-output-names = "clk-s-icn-reg-0";
};
clockgen-a@090ff000 {
compatible = "st,clkgen-c32";
reg = <0x90ff000 0x1000>;
clk_s_a0_pll: clk-s-a0-pll {
#clock-cells = <1>;
compatible = "st,clkgen-pll0";
clocks = <&clk_sysin>;
clock-output-names = "clk-s-a0-pll-ofd-0";
};
clk_s_a0_flexgen: clk-s-a0-flexgen {
compatible = "st,flexgen";
#clock-cells = <1>;
clocks = <&clk_s_a0_pll 0>,
<&clk_sysin>;
clock-output-names = "clk-ic-lmi0";
};
};
clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
#clock-cells = <1>;
compatible = "st,quadfs-pll";
reg = <0x9103000 0x1000>;
clocks = <&clk_sysin>;
clock-output-names = "clk-s-c0-fs0-ch0",
"clk-s-c0-fs0-ch1",
"clk-s-c0-fs0-ch2",
"clk-s-c0-fs0-ch3";
};
clk_s_c0: clockgen-c@09103000 {
compatible = "st,clkgen-c32";
reg = <0x9103000 0x1000>;
clk_s_c0_pll0: clk-s-c0-pll0 {
#clock-cells = <1>;
compatible = "st,clkgen-pll0";
clocks = <&clk_sysin>;
clock-output-names = "clk-s-c0-pll0-odf-0";
};
clk_s_c0_pll1: clk-s-c0-pll1 {
#clock-cells = <1>;
compatible = "st,clkgen-pll1";
clocks = <&clk_sysin>;
clock-output-names = "clk-s-c0-pll1-odf-0";
};
clk_s_c0_flexgen: clk-s-c0-flexgen {
#clock-cells = <1>;
compatible = "st,flexgen";
clocks = <&clk_s_c0_pll0 0>,
<&clk_s_c0_pll1 0>,
<&clk_s_c0_quadfs 0>,
<&clk_s_c0_quadfs 1>,
<&clk_s_c0_quadfs 2>,
<&clk_s_c0_quadfs 3>,
<&clk_sysin>;
clock-output-names = "clk-icn-gpu",
"clk-fdma",
"clk-nand",
"clk-hva",
"clk-proc-stfe",
"clk-proc-tp",
"clk-rx-icn-dmu",
"clk-rx-icn-hva",
"clk-icn-cpu",
"clk-tx-icn-dmu",
"clk-mmc-0",
"clk-mmc-1",
"clk-jpegdec",
"clk-ext2fa9",
"clk-ic-bdisp-0",
"clk-ic-bdisp-1",
"clk-pp-dmu",
"clk-vid-dmu",
"clk-dss-lpc",
"clk-st231-aud-0",
"clk-st231-gp-1",
"clk-st231-dmu",
"clk-icn-lmi",
"clk-tx-icn-disp-1",
"clk-icn-sbc",
"clk-stfe-frc2",
"clk-eth-phy",
"clk-eth-ref-phyclk",
"clk-flash-promip",
"clk-main-disp",
"clk-aux-disp",
"clk-compo-dvp";
};
};
clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
#clock-cells = <1>;
compatible = "st,quadfs";
reg = <0x9104000 0x1000>;
clocks = <&clk_sysin>;
clock-output-names = "clk-s-d0-fs0-ch0",
"clk-s-d0-fs0-ch1",
"clk-s-d0-fs0-ch2",
"clk-s-d0-fs0-ch3";
};
clockgen-d0@09104000 {
compatible = "st,clkgen-c32";
reg = <0x9104000 0x1000>;
clk_s_d0_flexgen: clk-s-d0-flexgen {
#clock-cells = <1>;
compatible = "st,flexgen-audio", "st,flexgen";
clocks = <&clk_s_d0_quadfs 0>,
<&clk_s_d0_quadfs 1>,
<&clk_s_d0_quadfs 2>,
<&clk_s_d0_quadfs 3>,
<&clk_sysin>;
clock-output-names = "clk-pcm-0",
"clk-pcm-1",
"clk-pcm-2",
"clk-spdiff";
};
};
clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
#clock-cells = <1>;
compatible = "st,quadfs";
reg = <0x9106000 0x1000>;
clocks = <&clk_sysin>;
clock-output-names = "clk-s-d2-fs0-ch0",
"clk-s-d2-fs0-ch1",
"clk-s-d2-fs0-ch2",
"clk-s-d2-fs0-ch3";
};
clk_tmdsout_hdmi: clk-tmdsout-hdmi {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
};
clockgen-d2@x9106000 {
compatible = "st,clkgen-c32";
reg = <0x9106000 0x1000>;
clk_s_d2_flexgen: clk-s-d2-flexgen {
#clock-cells = <1>;
compatible = "st,flexgen-video", "st,flexgen";
clocks = <&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>,
<&clk_s_d2_quadfs 2>,
<&clk_s_d2_quadfs 3>,
<&clk_sysin>,
<&clk_sysin>,
<&clk_tmdsout_hdmi>;
clock-output-names = "clk-pix-main-disp",
"clk-pix-pip",
"clk-pix-gdp1",
"clk-pix-gdp2",
"clk-pix-gdp3",
"clk-pix-gdp4",
"clk-pix-aux-disp",
"clk-denc",
"clk-pix-hddac",
"clk-hddac",
"clk-sddac",
"clk-pix-dvo",
"clk-dvo",
"clk-pix-hdmi",
"clk-tmds-hdmi",
"clk-ref-hdmiphy";
};
};
clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
#clock-cells = <1>;
compatible = "st,quadfs";
reg = <0x9107000 0x1000>;
clocks = <&clk_sysin>;
clock-output-names = "clk-s-d3-fs0-ch0",
"clk-s-d3-fs0-ch1",
"clk-s-d3-fs0-ch2",
"clk-s-d3-fs0-ch3";
};
clockgen-d3@9107000 {
compatible = "st,clkgen-c32";
reg = <0x9107000 0x1000>;
clk_s_d3_flexgen: clk-s-d3-flexgen {
#clock-cells = <1>;
compatible = "st,flexgen";
clocks = <&clk_s_d3_quadfs 0>,
<&clk_s_d3_quadfs 1>,
<&clk_s_d3_quadfs 2>,
<&clk_s_d3_quadfs 3>,
<&clk_sysin>;
clock-output-names = "clk-stfe-frc1",
"clk-tsout-0",
"clk-tsout-1",
"clk-mchi",
"clk-vsens-compo",
"clk-frc1-remote",
"clk-lpc-0",
"clk-lpc-1";
};
};
};
};

977
arch/arm/dts/stih407-family.dtsi Normal file
View file

@ -0,0 +1,977 @@
/*
* Copyright (C) 2014 STMicroelectronics Limited.
* Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
#include "stih407-pinctrl.dtsi"
#include <dt-bindings/mfd/st-lpc.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/reset/stih407-resets.h>
#include <dt-bindings/interrupt-controller/irq-st.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
dmu_reserved: rproc@44000000 {
compatible = "shared-dma-pool";
reg = <0x44000000 0x01000000>;
no-map;
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
/* u-boot puts hpen in SBC dmem at 0xa4 offset */
cpu-release-addr = <0x94100A4>;
/* kHz uV */
operating-points = <1500000 0
1200000 0
800000 0
500000 0>;
clocks = <&clk_m_a9>;
clock-names = "cpu";
clock-latency = <100000>;
st,syscfg = <&syscfg_core 0x8e0>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
/* u-boot puts hpen in SBC dmem at 0xa4 offset */
cpu-release-addr = <0x94100A4>;
/* kHz uV */
operating-points = <1500000 0
1200000 0
800000 0
500000 0>;
};
};
intc: interrupt-controller@08761000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x08761000 0x1000>, <0x08760100 0x100>;
};
scu@08760000 {
compatible = "arm,cortex-a9-scu";
reg = <0x08760000 0x1000>;
};
timer@08760200 {
interrupt-parent = <&intc>;
compatible = "arm,cortex-a9-global-timer";
reg = <0x08760200 0x100>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&arm_periph_clk>;
};
l2: cache-controller {
compatible = "arm,pl310-cache";
reg = <0x08762000 0x1000>;
arm,data-latency = <3 3 3>;
arm,tag-latency = <2 2 2>;
cache-unified;
cache-level = <2>;
};
arm-pmu {
interrupt-parent = <&intc>;
compatible = "arm,cortex-a9-pmu";
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
};
pwm_regulator: pwm-regulator {
compatible = "pwm-regulator";
pwms = <&pwm1 3 8448>;
regulator-name = "CPU_1V0_AVS";
regulator-min-microvolt = <784000>;
regulator-max-microvolt = <1299000>;
regulator-always-on;
max-duty-cycle = <255>;
status = "okay";
};
soc {
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
ranges;
compatible = "simple-bus";
restart {
compatible = "st,stih407-restart";
st,syscfg = <&syscfg_sbc_reg>;
status = "okay";
};
powerdown: powerdown-controller {
compatible = "st,stih407-powerdown";
#reset-cells = <1>;
};
softreset: softreset-controller {
compatible = "st,stih407-softreset";
#reset-cells = <1>;
};
picophyreset: picophyreset-controller {
compatible = "st,stih407-picophyreset";
#reset-cells = <1>;
};
syscfg_sbc: sbc-syscfg@9620000 {
compatible = "st,stih407-sbc-syscfg", "syscon";
reg = <0x9620000 0x1000>;
};
syscfg_front: front-syscfg@9280000 {
compatible = "st,stih407-front-syscfg", "syscon";
reg = <0x9280000 0x1000>;
};
syscfg_rear: rear-syscfg@9290000 {
compatible = "st,stih407-rear-syscfg", "syscon";
reg = <0x9290000 0x1000>;
};
syscfg_flash: flash-syscfg@92a0000 {
compatible = "st,stih407-flash-syscfg", "syscon";
reg = <0x92a0000 0x1000>;
};
syscfg_sbc_reg: fvdp-lite-syscfg@9600000 {
compatible = "st,stih407-sbc-reg-syscfg", "syscon";
reg = <0x9600000 0x1000>;
};
syscfg_core: core-syscfg@92b0000 {
compatible = "st,stih407-core-syscfg", "syscon";
reg = <0x92b0000 0x1000>;
};
syscfg_lpm: lpm-syscfg@94b5100 {
compatible = "st,stih407-lpm-syscfg", "syscon";
reg = <0x94b5100 0x1000>;
};
irq-syscfg {
compatible = "st,stih407-irq-syscfg";
st,syscfg = <&syscfg_core>;
st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
<ST_IRQ_SYSCFG_PMU_1>;
st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
<ST_IRQ_SYSCFG_DISABLED>;
};
/* Display */
vtg_main: sti-vtg-main@8d02800 {
compatible = "st,vtg";
reg = <0x8d02800 0x200>;
interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
};
vtg_aux: sti-vtg-aux@8d00200 {
compatible = "st,vtg";
reg = <0x8d00200 0x100>;
interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
};
serial@9830000 {
compatible = "st,asc";
reg = <0x9830000 0x2c>;
interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_serial0>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
status = "disabled";
};
serial@9831000 {
compatible = "st,asc";
reg = <0x9831000 0x2c>;
interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_serial1>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
status = "disabled";
};
serial@9832000 {
compatible = "st,asc";
reg = <0x9832000 0x2c>;
interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_serial2>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
status = "disabled";
};
/* SBC_ASC0 - UART10 */
sbc_serial0: serial@9530000 {
compatible = "st,asc";
reg = <0x9530000 0x2c>;
interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sbc_serial0>;
clocks = <&clk_sysin>;
status = "disabled";
};
serial@9531000 {
compatible = "st,asc";
reg = <0x9531000 0x2c>;
interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sbc_serial1>;
clocks = <&clk_sysin>;
status = "disabled";
};
i2c@9840000 {
compatible = "st,comms-ssc4-i2c";
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x9840000 0x110>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0_default>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c@9841000 {
compatible = "st,comms-ssc4-i2c";
reg = <0x9841000 0x110>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_default>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c@9842000 {
compatible = "st,comms-ssc4-i2c";
reg = <0x9842000 0x110>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_default>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c@9843000 {
compatible = "st,comms-ssc4-i2c";
reg = <0x9843000 0x110>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3_default>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c@9844000 {
compatible = "st,comms-ssc4-i2c";
reg = <0x9844000 0x110>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4_default>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c@9845000 {
compatible = "st,comms-ssc4-i2c";
reg = <0x9845000 0x110>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c5_default>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
/* SSCs on SBC */
i2c@9540000 {
compatible = "st,comms-ssc4-i2c";
reg = <0x9540000 0x110>;
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_sysin>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c10_default>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c@9541000 {
compatible = "st,comms-ssc4-i2c";
reg = <0x9541000 0x110>;
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_sysin>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c11_default>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
usb2_picophy0: phy1 {
compatible = "st,stih407-usb2-phy";
#phy-cells = <0>;
st,syscfg = <&syscfg_core 0x100 0xf4>;
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
<&picophyreset STIH407_PICOPHY2_RESET>;
reset-names = "global", "port";
};
miphy28lp_phy: miphy28lp@9b22000 {
compatible = "st,miphy28lp-phy";
st,syscfg = <&syscfg_core>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
phy_port0: port@9b22000 {
reg = <0x9b22000 0xff>,
<0x9b09000 0xff>,
<0x9b04000 0xff>;
reg-names = "sata-up",
"pcie-up",
"pipew";
st,syscfg = <0x114 0x818 0xe0 0xec>;
#phy-cells = <1>;
reset-names = "miphy-sw-rst";
resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
};
phy_port1: port@9b2a000 {
reg = <0x9b2a000 0xff>,
<0x9b19000 0xff>,
<0x9b14000 0xff>;
reg-names = "sata-up",
"pcie-up",
"pipew";
st,syscfg = <0x118 0x81c 0xe4 0xf0>;
#phy-cells = <1>;
reset-names = "miphy-sw-rst";
resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
};
phy_port2: port@8f95000 {
reg = <0x8f95000 0xff>,
<0x8f90000 0xff>;
reg-names = "pipew",
"usb3-up";
st,syscfg = <0x11c 0x820>;
#phy-cells = <1>;
reset-names = "miphy-sw-rst";
resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
};
};
spi@9840000 {
compatible = "st,comms-ssc4-spi";
reg = <0x9840000 0x110>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
pinctrl-0 = <&pinctrl_spi0_default>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi@9841000 {
compatible = "st,comms-ssc4-spi";
reg = <0x9841000 0x110>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_default>;
status = "disabled";
};
spi@9842000 {
compatible = "st,comms-ssc4-spi";
reg = <0x9842000 0x110>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2_default>;
status = "disabled";
};
spi@9843000 {
compatible = "st,comms-ssc4-spi";
reg = <0x9843000 0x110>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi3_default>;
status = "disabled";
};
spi@9844000 {
compatible = "st,comms-ssc4-spi";
reg = <0x9844000 0x110>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi4_default>;
status = "disabled";
};
/* SBC SSC */
spi@9540000 {
compatible = "st,comms-ssc4-spi";
reg = <0x9540000 0x110>;
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_sysin>;
clock-names = "ssc";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi10_default>;
status = "disabled";
};
spi@9541000 {
compatible = "st,comms-ssc4-spi";
reg = <0x9541000 0x110>;
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_sysin>;
clock-names = "ssc";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi11_default>;
status = "disabled";
};
spi@9542000 {
compatible = "st,comms-ssc4-spi";
reg = <0x9542000 0x110>;
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_sysin>;
clock-names = "ssc";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi12_default>;
status = "disabled";
};
mmc0: sdhci@09060000 {
compatible = "st,sdhci-stih407", "st,sdhci";
status = "disabled";
reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
reg-names = "mmc", "top-mmc-delay";
interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>;
interrupt-names = "mmcirq";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc0>;
clock-names = "mmc", "icn";
clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
bus-width = <8>;
};
mmc1: sdhci@09080000 {
compatible = "st,sdhci-stih407", "st,sdhci";
status = "disabled";
reg = <0x09080000 0x7ff>;
reg-names = "mmc";
interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>;
interrupt-names = "mmcirq";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sd1>;
clock-names = "mmc", "icn";
clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
<&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
resets = <&softreset STIH407_MMC1_SOFTRESET>;
bus-width = <4>;
};
/* Watchdog and Real-Time Clock */
lpc@8787000 {
compatible = "st,stih407-lpc";
reg = <0x8787000 0x1000>;
interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
timeout-sec = <120>;
st,syscfg = <&syscfg_core>;
st,lpc-mode = <ST_LPC_MODE_WDT>;
};
lpc@8788000 {
compatible = "st,stih407-lpc";
reg = <0x8788000 0x1000>;
interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
st,lpc-mode = <ST_LPC_MODE_CLKSRC>;
};
sata0: sata@9b20000 {
compatible = "st,ahci";
reg = <0x9b20000 0x1000>;
interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
interrupt-names = "hostc";
phys = <&phy_port0 PHY_TYPE_SATA>;
phy-names = "ahci_phy";
resets = <&powerdown STIH407_SATA0_POWERDOWN>,
<&softreset STIH407_SATA0_SOFTRESET>,
<&softreset STIH407_SATA0_PWR_SOFTRESET>;
reset-names = "pwr-dwn", "sw-rst", "pwr-rst";
clock-names = "ahci_clk";
clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
ports-implemented = <0x1>;
status = "disabled";
};
sata1: sata@9b28000 {
compatible = "st,ahci";
reg = <0x9b28000 0x1000>;
interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
interrupt-names = "hostc";
phys = <&phy_port1 PHY_TYPE_SATA>;
phy-names = "ahci_phy";
resets = <&powerdown STIH407_SATA1_POWERDOWN>,
<&softreset STIH407_SATA1_SOFTRESET>,
<&softreset STIH407_SATA1_PWR_SOFTRESET>;
reset-names = "pwr-dwn",
"sw-rst",
"pwr-rst";
clock-names = "ahci_clk";
clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
ports-implemented = <0x1>;
status = "disabled";
};
st_dwc3: dwc3@8f94000 {
compatible = "st,stih407-dwc3";
reg = <0x08f94000 0x1000>, <0x110 0x4>;
reg-names = "reg-glue", "syscfg-reg";
st,syscfg = <&syscfg_core>;
resets = <&powerdown STIH407_USB3_POWERDOWN>,
<&softreset STIH407_MIPHY2_SOFTRESET>;
reset-names = "powerdown", "softreset";
#address-cells = <1>;
#size-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb3>;
ranges;
status = "disabled";
dwc3: dwc3@9900000 {
compatible = "snps,dwc3";
reg = <0x09900000 0x100000>;
interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>;
dr_mode = "host";
phy-names = "usb2-phy", "usb3-phy";
phys = <&usb2_picophy0>,
<&phy_port2 PHY_TYPE_USB3>;
};
};
/* COMMS PWM Module */
pwm0: pwm@9810000 {
compatible = "st,sti-pwm";
#pwm-cells = <2>;
reg = <0x9810000 0x68>;
interrupts = <GIC_SPI 128 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
clock-names = "pwm";
clocks = <&clk_sysin>;
st,pwm-num-chan = <1>;
status = "disabled";
};
/* SBC PWM Module */
pwm1: pwm@9510000 {
compatible = "st,sti-pwm";
#pwm-cells = <2>;
reg = <0x9510000 0x68>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1_chan0_default
&pinctrl_pwm1_chan1_default
&pinctrl_pwm1_chan2_default
&pinctrl_pwm1_chan3_default>;
clock-names = "pwm";
clocks = <&clk_sysin>;
st,pwm-num-chan = <4>;
status = "disabled";
};
rng10: rng@08a89000 {
compatible = "st,rng";
reg = <0x08a89000 0x1000>;
clocks = <&clk_sysin>;
status = "okay";
};
rng11: rng@08a8a000 {
compatible = "st,rng";
reg = <0x08a8a000 0x1000>;
clocks = <&clk_sysin>;
status = "okay";
};
ethernet0: dwmac@9630000 {
device_type = "network";
status = "disabled";
compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
reg = <0x9630000 0x8000>, <0x80 0x4>;
reg-names = "stmmaceth", "sti-ethconf";
st,syscon = <&syscfg_sbc_reg 0x80>;
st,gmac_en;
resets = <&softreset STIH407_ETH1_SOFTRESET>;
reset-names = "stmmaceth";
interrupts = <GIC_SPI 98 IRQ_TYPE_NONE>,
<GIC_SPI 99 IRQ_TYPE_NONE>;
interrupt-names = "macirq", "eth_wake_irq";
/* DMA Bus Mode */
snps,pbl = <8>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii1>;
clock-names = "stmmaceth", "sti-ethclk";
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>,
<&clk_s_c0_flexgen CLK_ETH_PHY>;
};
cec: sti-cec@094a087c {
compatible = "st,stih-cec";
reg = <0x94a087c 0x64>;
clocks = <&clk_sysin>;
clock-names = "cec-clk";
interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
interrupt-names = "cec-irq";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cec0_default>;
resets = <&softreset STIH407_LPM_SOFTRESET>;
};
rng10: rng@08a89000 {
compatible = "st,rng";
reg = <0x08a89000 0x1000>;
clocks = <&clk_sysin>;
status = "okay";
};
rng11: rng@08a8a000 {
compatible = "st,rng";
reg = <0x08a8a000 0x1000>;
clocks = <&clk_sysin>;
status = "okay";
};
mailbox0: mailbox@8f00000 {
compatible = "st,stih407-mailbox";
reg = <0x8f00000 0x1000>;
interrupts = <GIC_SPI 1 IRQ_TYPE_NONE>;
#mbox-cells = <2>;
mbox-name = "a9";
status = "okay";
};
mailbox1: mailbox@8f01000 {
compatible = "st,stih407-mailbox";
reg = <0x8f01000 0x1000>;
#mbox-cells = <2>;
mbox-name = "st231_gp_1";
status = "okay";
};
mailbox2: mailbox@8f02000 {
compatible = "st,stih407-mailbox";
reg = <0x8f02000 0x1000>;
#mbox-cells = <2>;
mbox-name = "st231_gp_0";
status = "okay";
};
mailbox3: mailbox@8f03000 {
compatible = "st,stih407-mailbox";
reg = <0x8f03000 0x1000>;
#mbox-cells = <2>;
mbox-name = "st231_audio_video";
status = "okay";
};
st231_delta: st231-delta@44000000 {
compatible = "st,st231-rproc";
memory-region = <&dmu_reserved>;
resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
reset-names = "sw_reset";
clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
clock-frequency = <600000000>;
st,syscfg = <&syscfg_core 0x224>;
#mbox-cells = <1>;
mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
};
/* fdma audio */
fdma0: dma-controller@8e20000 {
compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
reg = <0x8e20000 0x8000>,
<0x8e30000 0x3000>,
<0x8e37000 0x1000>,
<0x8e38000 0x8000>;
reg-names = "slimcore", "dmem", "peripherals", "imem";
clocks = <&clk_s_c0_flexgen CLK_FDMA>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>;
interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
dma-channels = <16>;
#dma-cells = <3>;
};
/* fdma app */
fdma1: dma-controller@8e40000 {
compatible = "st,stih407-fdma-mpe31-12", "st,slim-rproc";
reg = <0x8e40000 0x8000>,
<0x8e50000 0x3000>,
<0x8e57000 0x1000>,
<0x8e58000 0x8000>;
reg-names = "slimcore", "dmem", "peripherals", "imem";
clocks = <&clk_s_c0_flexgen CLK_FDMA>,
<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>;
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>;
dma-channels = <16>;
#dma-cells = <3>;
};
/* fdma free running */
fdma2: dma-controller@8e60000 {
compatible = "st,stih407-fdma-mpe31-13", "st,slim-rproc";
reg = <0x8e60000 0x8000>,
<0x8e70000 0x3000>,
<0x8e77000 0x1000>,
<0x8e78000 0x8000>;
reg-names = "slimcore", "dmem", "peripherals", "imem";
interrupts = <GIC_SPI 9 IRQ_TYPE_NONE>;
dma-channels = <16>;
#dma-cells = <3>;
clocks = <&clk_s_c0_flexgen CLK_FDMA>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>,
<&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>;
};
sti_sasg_codec: sti-sasg-codec {
compatible = "st,stih407-sas-codec";
#sound-dai-cells = <1>;
status = "disabled";
st,syscfg = <&syscfg_core>;
};
sti_uni_player0: sti-uni-player@8d80000 {
compatible = "st,stih407-uni-player-hdmi";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
clocks = <&clk_s_d0_flexgen CLK_PCM_0>;
assigned-clocks = <&clk_s_d0_quadfs 0>, <&clk_s_d0_flexgen CLK_PCM_0>;
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>;
assigned-clock-rates = <50000000>;
reg = <0x8d80000 0x158>;
interrupts = <GIC_SPI 84 IRQ_TYPE_NONE>;
dmas = <&fdma0 2 0 1>;
dma-names = "tx";
status = "disabled";
};
sti_uni_player1: sti-uni-player@8d81000 {
compatible = "st,stih407-uni-player-pcm-out";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
clocks = <&clk_s_d0_flexgen CLK_PCM_1>;
assigned-clocks = <&clk_s_d0_quadfs 1>, <&clk_s_d0_flexgen CLK_PCM_1>;
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>;
assigned-clock-rates = <50000000>;
reg = <0x8d81000 0x158>;
interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
dmas = <&fdma0 3 0 1>;
dma-names = "tx";
status = "disabled";
};
sti_uni_player2: sti-uni-player@8d82000 {
compatible = "st,stih407-uni-player-dac";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
assigned-clocks = <&clk_s_d0_quadfs 2>, <&clk_s_d0_flexgen CLK_PCM_2>;
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>;
assigned-clock-rates = <50000000>;
reg = <0x8d82000 0x158>;
interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
dmas = <&fdma0 4 0 1>;
dma-names = "tx";
status = "disabled";
};
sti_uni_player3: sti-uni-player@8d85000 {
compatible = "st,stih407-uni-player-spdif";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
assigned-clocks = <&clk_s_d0_quadfs 3>, <&clk_s_d0_flexgen CLK_SPDIFF>;
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>;
assigned-clock-rates = <50000000>;
reg = <0x8d85000 0x158>;
interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
dmas = <&fdma0 7 0 1>;
dma-names = "tx";
status = "disabled";
};
sti_uni_reader0: sti-uni-reader@8d83000 {
compatible = "st,stih407-uni-reader-pcm_in";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
reg = <0x8d83000 0x158>;
interrupts = <GIC_SPI 87 IRQ_TYPE_NONE>;
dmas = <&fdma0 5 0 1>;
dma-names = "rx";
status = "disabled";
};
sti_uni_reader1: sti-uni-reader@8d84000 {
compatible = "st,stih407-uni-reader-hdmi";
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
reg = <0x8d84000 0x158>;
interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>;
dmas = <&fdma0 6 0 1>;
dma-names = "rx";
status = "disabled";
};
rc: rc@09518000 {
compatible = "st,comms-irb";
reg = <0x09518000 0x234>;
interrupts = <GIC_SPI 132 IRQ_TYPE_NONE>;
rx-mode = "infrared";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ir
&pinctrl_uhf
&pinctrl_tx
&pinctrl_tx_od>;
clocks = <&clk_sysin>;
resets = <&softreset STIH407_IRB_SOFTRESET>;
status = "disabled";
};
socinfo {
compatible = "st,stih407-socinfo";
st,syscfg = <&syscfg_core>;
};
};
};

1303
arch/arm/dts/stih407-pinctrl.dtsi Normal file
View file

File diff suppressed because it is too large Load diff

226
arch/arm/dts/stih410-b2260.dts Normal file
View file

@ -0,0 +1,226 @@
/*
* Copyright (C) 2016 STMicroelectronics (R&D) Limited.
* Author: Patrice Chotard <patrice.chotard@st.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "stih410.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "STiH410 B2260";
compatible = "st,stih410-b2260", "st,stih410";
chosen {
bootargs = "console=ttyAS1,115200";
linux,stdout-path = &uart1;
stdout-path = &uart1;
};
memory {
device_type = "memory";
reg = <0x40000000 0x40000000>;
};
aliases {
ttyAS1 = &uart1;
ethernet0 = &ethernet0;
};
soc {
leds {
compatible = "gpio-leds";
user_green_1 {
label = "User_green_1";
gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
user_green_2 {
label = "User_green_2";
gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
user_green_3 {
label = "User_green_3";
gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
user_green_4 {
label = "User_green_4";
gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wifi_yellow {
label = "Wifi_yellow";
gpios = <&pio4 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "wifi-activity";
default-state = "off";
};
bt_blue {
label = "Bluetooth_blue";
gpios = <&pio3 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "hci0-power";
default-state = "off";
};
};
/* Low speed expansion connector */
uart0: serial@9830000 {
label = "LS-UART0";
status = "okay";
};
/* Low speed expansion connector */
uart1: serial@9831000 {
label = "LS-UART1";
status = "okay";
};
/* Low speed expansion connector */
spi0: spi@9844000 {
label = "LS-SPI0";
cs-gpios = <&pio30 3 0>;
status = "okay";
};
/* Low speed expansion connector */
i2c0: i2c@9840000 {
label = "LS-I2C0";
status = "okay";
};
/* Low speed expansion connector */
i2c1: i2c@9841000 {
label = "LS-I2C1";
status = "okay";
};
/* high speed expansion connector */
i2c2: i2c@9842000 {
label = "HS-I2C2";
pinctrl-0 = <&pinctrl_i2c2_alt2_1>;
status = "okay";
};
/* high speed expansion connector */
i2c3: i2c@9843000 {
label = "HS-I2C3";
pinctrl-0 = <&pinctrl_i2c3_alt3_0>;
status = "okay";
};
mmc0: sdhci@09060000 {
pinctrl-0 = <&pinctrl_sd0>;
bus-width = <4>;
status = "okay";
};
/* high speed expansion connector */
mmc1: sdhci@09080000 {
status = "okay";
};
pwm0: pwm@9810000 {
status = "okay";
};
pwm1: pwm@9510000 {
status = "okay";
};
usb2_picophy1: phy2 {
status = "okay";
};
usb2_picophy2: phy3 {
status = "okay";
};
ohci0: usb@9a03c00 {
status = "okay";
};
ehci0: usb@9a03e00 {
status = "okay";
};
ohci1: usb@9a83c00 {
status = "okay";
};
ehci1: usb@9a83e00 {
status = "okay";
};
st_dwc3: dwc3@8f94000 {
status = "okay";
};
ethernet0: dwmac@9630000 {
phy-mode = "rgmii";
pinctrl-0 = <&pinctrl_rgmii1 &pinctrl_rgmii1_mdio_1>;
snps,phy-bus-name = "stmmac";
snps,phy-bus-id = <0>;
snps,phy-addr = <0>;
snps,reset-gpio = <&pio0 7 0>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
status = "okay";
};
sti_uni_player0: sti-uni-player@8d80000 {
status = "okay";
};
/* SSC11 to HDMI */
hdmiddc: i2c@9541000 {
/* HDMI V1.3a supports Standard mode only */
clock-frequency = <100000>;
st,i2c-min-scl-pulse-width-us = <0>;
st,i2c-min-sda-pulse-width-us = <1>;
status = "okay";
};
miphy28lp_phy: miphy28lp@9b22000 {
phy_port1: port@9b2a000 {
st,osc-force-ext;
};
};
sata1: sata@9b28000 {
status = "okay";
};
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "STI-B2260";
status = "okay";
simple-audio-card,dai-link@0 {
/* DAC */
format = "i2s";
mclk-fs = <128>;
cpu {
sound-dai = <&sti_uni_player0>;
};
codec {
sound-dai = <&sti_hdmi>;
};
};
};
};
};

347
arch/arm/dts/stih410-clock.dtsi Normal file
View file

@ -0,0 +1,347 @@
/*
* Copyright (C) 2014 STMicroelectronics R&D Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <dt-bindings/clock/stih410-clks.h>
/ {
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "st,stih410-clk", "simple-bus";
/*
* Fixed 30MHz oscillator inputs to SoC
*/
clk_sysin: clk-sysin {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <30000000>;
clock-output-names = "CLK_SYSIN";
};
/*
* ARM Peripheral clock for timers
*/
arm_periph_clk: clk-m-a9-periphs {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&clk_m_a9>;
clock-div = <2>;
clock-mult = <1>;
};
/*
* A9 PLL.
*/
clockgen-a9@92b0000 {
compatible = "st,clkgen-c32";
reg = <0x92b0000 0xffff>;
clockgen_a9_pll: clockgen-a9-pll {
#clock-cells = <1>;
compatible = "st,stih407-clkgen-plla9";
clocks = <&clk_sysin>;
clock-output-names = "clockgen-a9-pll-odf";
};
};
/*
* ARM CPU related clocks.
*/
clk_m_a9: clk-m-a9@92b0000 {
#clock-cells = <0>;
compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
reg = <0x92b0000 0x10000>;
clocks = <&clockgen_a9_pll 0>,
<&clockgen_a9_pll 0>,
<&clk_s_c0_flexgen 13>,
<&clk_m_a9_ext2f_div2>;
};
/*
* ARM Peripheral clock for timers
*/
clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&clk_s_c0_flexgen 13>;
clock-output-names = "clk-m-a9-ext2f-div2";
clock-div = <2>;
clock-mult = <1>;
};
/*
* Bootloader initialized system infrastructure clock for
* serial devices.
*/
clk_ext2f_a9: clockgen-c0@13 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <200000000>;
clock-output-names = "clk-s-icn-reg-0";
};
clockgen-a@090ff000 {
compatible = "st,clkgen-c32";
reg = <0x90ff000 0x1000>;
clk_s_a0_pll: clk-s-a0-pll {
#clock-cells = <1>;
compatible = "st,clkgen-pll0";
clocks = <&clk_sysin>;
clock-output-names = "clk-s-a0-pll-ofd-0";
clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
};
clk_s_a0_flexgen: clk-s-a0-flexgen {
compatible = "st,flexgen";
#clock-cells = <1>;
clocks = <&clk_s_a0_pll 0>,
<&clk_sysin>;
clock-output-names = "clk-ic-lmi0",
"clk-ic-lmi1";
clock-critical = <CLK_IC_LMI0>;
};
};
clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
#clock-cells = <1>;
compatible = "st,quadfs-pll";
reg = <0x9103000 0x1000>;
clocks = <&clk_sysin>;
clock-output-names = "clk-s-c0-fs0-ch0",
"clk-s-c0-fs0-ch1",
"clk-s-c0-fs0-ch2",
"clk-s-c0-fs0-ch3";
clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
};
clk_s_c0: clockgen-c@09103000 {
compatible = "st,clkgen-c32";
reg = <0x9103000 0x1000>;
clk_s_c0_pll0: clk-s-c0-pll0 {
#clock-cells = <1>;
compatible = "st,clkgen-pll0";
clocks = <&clk_sysin>;
clock-output-names = "clk-s-c0-pll0-odf-0";
clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
};
clk_s_c0_pll1: clk-s-c0-pll1 {
#clock-cells = <1>;
compatible = "st,clkgen-pll1";
clocks = <&clk_sysin>;
clock-output-names = "clk-s-c0-pll1-odf-0";
};
clk_s_c0_flexgen: clk-s-c0-flexgen {
#clock-cells = <1>;
compatible = "st,flexgen";
clocks = <&clk_s_c0_pll0 0>,
<&clk_s_c0_pll1 0>,
<&clk_s_c0_quadfs 0>,
<&clk_s_c0_quadfs 1>,
<&clk_s_c0_quadfs 2>,
<&clk_s_c0_quadfs 3>,
<&clk_sysin>;
clock-output-names = "clk-icn-gpu",
"clk-fdma",
"clk-nand",
"clk-hva",
"clk-proc-stfe",
"clk-proc-tp",
"clk-rx-icn-dmu",
"clk-rx-icn-hva",
"clk-icn-cpu",
"clk-tx-icn-dmu",
"clk-mmc-0",
"clk-mmc-1",
"clk-jpegdec",
"clk-ext2fa9",
"clk-ic-bdisp-0",
"clk-ic-bdisp-1",
"clk-pp-dmu",
"clk-vid-dmu",
"clk-dss-lpc",
"clk-st231-aud-0",
"clk-st231-gp-1",
"clk-st231-dmu",
"clk-icn-lmi",
"clk-tx-icn-disp-1",
"clk-icn-sbc",
"clk-stfe-frc2",
"clk-eth-phy",
"clk-eth-ref-phyclk",
"clk-flash-promip",
"clk-main-disp",
"clk-aux-disp",
"clk-compo-dvp",
"clk-tx-icn-hades",
"clk-rx-icn-hades",
"clk-icn-reg-16",
"clk-pp-hades",
"clk-clust-hades",
"clk-hwpe-hades",
"clk-fc-hades";
clock-critical = <CLK_ICN_CPU>,
<CLK_TX_ICN_DMU>,
<CLK_EXT2F_A9>,
<CLK_ICN_LMI>,
<CLK_ICN_SBC>;
};
};
clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
#clock-cells = <1>;
compatible = "st,quadfs";
reg = <0x9104000 0x1000>;
clocks = <&clk_sysin>;
clock-output-names = "clk-s-d0-fs0-ch0",
"clk-s-d0-fs0-ch1",
"clk-s-d0-fs0-ch2",
"clk-s-d0-fs0-ch3";
};
clockgen-d0@09104000 {
compatible = "st,clkgen-c32";
reg = <0x9104000 0x1000>;
clk_s_d0_flexgen: clk-s-d0-flexgen {
#clock-cells = <1>;
compatible = "st,flexgen-audio", "st,flexgen";
clocks = <&clk_s_d0_quadfs 0>,
<&clk_s_d0_quadfs 1>,
<&clk_s_d0_quadfs 2>,
<&clk_s_d0_quadfs 3>,
<&clk_sysin>;
clock-output-names = "clk-pcm-0",
"clk-pcm-1",
"clk-pcm-2",
"clk-spdiff",
"clk-pcmr10-master",
"clk-usb2-phy";
};
};
clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
#clock-cells = <1>;
compatible = "st,quadfs";
reg = <0x9106000 0x1000>;
clocks = <&clk_sysin>;
clock-output-names = "clk-s-d2-fs0-ch0",
"clk-s-d2-fs0-ch1",
"clk-s-d2-fs0-ch2",
"clk-s-d2-fs0-ch3";
};
clk_tmdsout_hdmi: clk-tmdsout-hdmi {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
};
clockgen-d2@x9106000 {
compatible = "st,clkgen-c32";
reg = <0x9106000 0x1000>;
clk_s_d2_flexgen: clk-s-d2-flexgen {
#clock-cells = <1>;
compatible = "st,flexgen-video", "st,flexgen";
clocks = <&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>,
<&clk_s_d2_quadfs 2>,
<&clk_s_d2_quadfs 3>,
<&clk_sysin>,
<&clk_sysin>,
<&clk_tmdsout_hdmi>;
clock-output-names = "clk-pix-main-disp",
"clk-pix-pip",
"clk-pix-gdp1",
"clk-pix-gdp2",
"clk-pix-gdp3",
"clk-pix-gdp4",
"clk-pix-aux-disp",
"clk-denc",
"clk-pix-hddac",
"clk-hddac",
"clk-sddac",
"clk-pix-dvo",
"clk-dvo",
"clk-pix-hdmi",
"clk-tmds-hdmi",
"clk-ref-hdmiphy";
};
};
clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
#clock-cells = <1>;
compatible = "st,quadfs";
reg = <0x9107000 0x1000>;
clocks = <&clk_sysin>;
clock-output-names = "clk-s-d3-fs0-ch0",
"clk-s-d3-fs0-ch1",
"clk-s-d3-fs0-ch2",
"clk-s-d3-fs0-ch3";
};
clockgen-d3@9107000 {
compatible = "st,clkgen-c32";
reg = <0x9107000 0x1000>;
clk_s_d3_flexgen: clk-s-d3-flexgen {
#clock-cells = <1>;
compatible = "st,flexgen";
clocks = <&clk_s_d3_quadfs 0>,
<&clk_s_d3_quadfs 1>,
<&clk_s_d3_quadfs 2>,
<&clk_s_d3_quadfs 3>,
<&clk_sysin>;
clock-output-names = "clk-stfe-frc1",
"clk-tsout-0",
"clk-tsout-1",
"clk-mchi",
"clk-vsens-compo",
"clk-frc1-remote",
"clk-lpc-0",
"clk-lpc-1";
};
};
};
};

34
arch/arm/dts/stih410-pinctrl.dtsi Normal file
View file

@ -0,0 +1,34 @@
/*
* Copyright (C) 2014 STMicroelectronics Limited.
* Author: Peter Griffin <peter.griffin@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
#include "st-pincfg.h"
/ {
soc {
pin-controller-rear {
usb0 {
pinctrl_usb0: usb2-0 {
st,pins {
usb-oc-detect = <&pio35 0 ALT1 IN>;
usb-pwr-enable = <&pio35 1 ALT1 OUT>;
};
};
};
usb1 {
pinctrl_usb1: usb2-1 {
st,pins {
usb-oc-detect = <&pio35 2 ALT1 IN>;
usb-pwr-enable = <&pio35 3 ALT1 OUT>;
};
};
};
};
};
};

454
arch/arm/dts/stih410.dtsi Normal file
View file

@ -0,0 +1,454 @@
/*
* Copyright (C) 2014 STMicroelectronics Limited.
* Author: Peter Griffin <peter.griffin@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
#include "stih410-clock.dtsi"
#include "stih407-family.dtsi"
#include "stih410-pinctrl.dtsi"
/ {
aliases {
bdisp0 = &bdisp0;
};
cpus {
cpu@0 {
st,syscfg = <&syscfg_core 0x8e0>;
st,syscfg-eng = <&syscfg_opp 0x4 0x0>;
clocks = <&clk_m_a9>;
operating-points-v2 = <&cpu0_opp_table>;
};
cpu@1 {
clocks = <&clk_m_a9>;
operating-points-v2 = <&cpu0_opp_table>;
};
};
cpu0_opp_table: opp_table0 {
compatible = "operating-points-v2";
opp-shared;
opp@1500000000 {
opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>;
opp-hz = /bits/ 64 <1500000000>;
clock-latency-ns = <10000000>;
opp-suspend;
};
opp@1200000000 {
opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>;
opp-hz = /bits/ 64 <1200000000>;
clock-latency-ns = <10000000>;
};
opp@800000000 {
opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>;
opp-hz = /bits/ 64 <800000000>;
clock-latency-ns = <10000000>;
};
opp@400000000 {
opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>;
opp-hz = /bits/ 64 <400000000>;
clock-latency-ns = <10000000>;
};
};
soc {
syscfg_opp: @08a6583c {
compatible = "syscon";
reg = <0x08a6583c 0x8>;
};
usb2_picophy1: phy2 {
compatible = "st,stih407-usb2-phy";
#phy-cells = <0>;
st,syscfg = <&syscfg_core 0xf8 0xf4>;
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
<&picophyreset STIH407_PICOPHY0_RESET>;
reset-names = "global", "port";
status = "disabled";
};
usb2_picophy2: phy3 {
compatible = "st,stih407-usb2-phy";
#phy-cells = <0>;
st,syscfg = <&syscfg_core 0xfc 0xf4>;
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
<&picophyreset STIH407_PICOPHY1_RESET>;
reset-names = "global", "port";
status = "disabled";
};
ohci0: usb@9a03c00 {
compatible = "st,st-ohci-300x";
reg = <0x9a03c00 0x100>;
interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
<&softreset STIH407_USB2_PORT0_SOFTRESET>;
reset-names = "power", "softreset";
phys = <&usb2_picophy1>;
phy-names = "usb";
status = "disabled";
};
ehci0: usb@9a03e00 {
compatible = "st,st-ehci-300x";
reg = <0x9a03e00 0x100>;
interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
<&softreset STIH407_USB2_PORT0_SOFTRESET>;
reset-names = "power", "softreset";
phys = <&usb2_picophy1>;
phy-names = "usb";
status = "disabled";
};
ohci1: usb@9a83c00 {
compatible = "st,st-ohci-300x";
reg = <0x9a83c00 0x100>;
interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
<&softreset STIH407_USB2_PORT1_SOFTRESET>;
reset-names = "power", "softreset";
phys = <&usb2_picophy2>;
phy-names = "usb";
status = "disabled";
};
ehci1: usb@9a83e00 {
compatible = "st,st-ehci-300x";
reg = <0x9a83e00 0x100>;
interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
<&softreset STIH407_USB2_PORT1_SOFTRESET>;
reset-names = "power", "softreset";
phys = <&usb2_picophy2>;
phy-names = "usb";
status = "disabled";
};
sti-display-subsystem {
compatible = "st,sti-display-subsystem";
#address-cells = <1>;
#size-cells = <1>;
assigned-clocks = <&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>,
<&clk_s_c0_pll1 0>,
<&clk_s_c0_flexgen CLK_COMPO_DVP>,
<&clk_s_c0_flexgen CLK_MAIN_DISP>,
<&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
<&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
<&clk_s_d2_flexgen CLK_PIX_GDP1>,
<&clk_s_d2_flexgen CLK_PIX_GDP2>,
<&clk_s_d2_flexgen CLK_PIX_GDP3>,
<&clk_s_d2_flexgen CLK_PIX_GDP4>;
assigned-clock-parents = <0>,
<0>,
<0>,
<&clk_s_c0_pll1 0>,
<&clk_s_c0_pll1 0>,
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>,
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 0>;
assigned-clock-rates = <297000000>,
<297000000>,
<0>,
<400000000>,
<400000000>;
ranges;
sti-compositor@9d11000 {
compatible = "st,stih407-compositor";
reg = <0x9d11000 0x1000>;
clock-names = "compo_main",
"compo_aux",
"pix_main",
"pix_aux",
"pix_gdp1",
"pix_gdp2",
"pix_gdp3",
"pix_gdp4",
"main_parent",
"aux_parent";
clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>,
<&clk_s_c0_flexgen CLK_COMPO_DVP>,
<&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
<&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
<&clk_s_d2_flexgen CLK_PIX_GDP1>,
<&clk_s_d2_flexgen CLK_PIX_GDP2>,
<&clk_s_d2_flexgen CLK_PIX_GDP3>,
<&clk_s_d2_flexgen CLK_PIX_GDP4>,
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>;
reset-names = "compo-main", "compo-aux";
resets = <&softreset STIH407_COMPO_SOFTRESET>,
<&softreset STIH407_COMPO_SOFTRESET>;
st,vtg = <&vtg_main>, <&vtg_aux>;
};
sti-tvout@8d08000 {
compatible = "st,stih407-tvout";
reg = <0x8d08000 0x1000>;
reg-names = "tvout-reg";
reset-names = "tvout";
resets = <&softreset STIH407_HDTVOUT_SOFTRESET>;
#address-cells = <1>;
#size-cells = <1>;
assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
<&clk_s_d2_flexgen CLK_TMDS_HDMI>,
<&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
<&clk_s_d0_flexgen CLK_PCM_0>,
<&clk_s_d2_flexgen CLK_PIX_HDDAC>,
<&clk_s_d2_flexgen CLK_HDDAC>;
assigned-clock-parents = <&clk_s_d2_quadfs 0>,
<&clk_tmdsout_hdmi>,
<&clk_s_d2_quadfs 0>,
<&clk_s_d0_quadfs 0>,
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 0>;
};
sti_hdmi: sti-hdmi@8d04000 {
compatible = "st,stih407-hdmi";
#sound-dai-cells = <0>;
reg = <0x8d04000 0x1000>;
reg-names = "hdmi-reg";
interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
interrupt-names = "irq";
clock-names = "pix",
"tmds",
"phy",
"audio",
"main_parent",
"aux_parent";
clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
<&clk_s_d2_flexgen CLK_TMDS_HDMI>,
<&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
<&clk_s_d0_flexgen CLK_PCM_0>,
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>;
hdmi,hpd-gpio = <&pio5 3>;
reset-names = "hdmi";
resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
ddc = <&hdmiddc>;
};
sti-hda@8d02000 {
compatible = "st,stih407-hda";
status = "disabled";
reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
reg-names = "hda-reg", "video-dacs-ctrl";
clock-names = "pix",
"hddac",
"main_parent",
"aux_parent";
clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
<&clk_s_d2_flexgen CLK_HDDAC>,
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>;
};
sti-dvo@8d00400 {
compatible = "st,stih407-dvo";
status = "disabled";
reg = <0x8d00400 0x200>;
reg-names = "dvo-reg";
clock-names = "dvo_pix",
"dvo",
"main_parent",
"aux_parent";
clocks = <&clk_s_d2_flexgen CLK_PIX_DVO>,
<&clk_s_d2_flexgen CLK_DVO>,
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dvo>;
};
sti-hqvdp@9c000000 {
compatible = "st,stih407-hqvdp";
reg = <0x9C00000 0x100000>;
clock-names = "hqvdp", "pix_main";
clocks = <&clk_s_c0_flexgen CLK_MAIN_DISP>,
<&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>;
reset-names = "hqvdp";
resets = <&softreset STIH407_HDQVDP_SOFTRESET>;
st,vtg = <&vtg_main>;
};
};
bdisp0:bdisp@9f10000 {
compatible = "st,stih407-bdisp";
reg = <0x9f10000 0x1000>;
interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>;
clock-names = "bdisp";
clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
};
hva@8c85000 {
compatible = "st,st-hva";
reg = <0x8c85000 0x400>, <0x6000000 0x40000>;
reg-names = "hva_registers", "hva_esram";
interrupts = <GIC_SPI 58 IRQ_TYPE_NONE>,
<GIC_SPI 59 IRQ_TYPE_NONE>;
clock-names = "clk_hva";
clocks = <&clk_s_c0_flexgen CLK_HVA>;
};
thermal@91a0000 {
compatible = "st,stih407-thermal";
reg = <0x91a0000 0x28>;
clock-names = "thermal";
clocks = <&clk_sysin>;
interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
};
g1@8c80000 {
compatible = "st,g1";
reg = <0x8c80000 0x194>;
interrupts = <GIC_SPI 57 IRQ_TYPE_NONE>;
};
temp0{
compatible = "st,stih407-thermal";
reg = <0x91a0000 0x28>;
clock-names = "thermal";
clocks = <&clk_sysin>;
interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
};
delta0 {
compatible = "st,delta";
clock-names = "delta", "delta-st231", "delta-flash-promip";
clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
<&clk_s_c0_flexgen CLK_ST231_DMU>,
<&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
};
h264pp0: h264pp@8c00000 {
compatible = "st,h264pp";
reg = <0x8c00000 0x20000>;
interrupts = <GIC_SPI 53 IRQ_TYPE_NONE>;
clock-names = "clk_h264pp_0";
clocks = <&clk_s_c0_flexgen CLK_PP_DMU>;
};
mali: mali@09f00000 {
compatible = "arm,mali-400";
reg = <0x09f00000 0x10000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_NONE>,
<GIC_SPI 50 IRQ_TYPE_NONE>,
<GIC_SPI 41 IRQ_TYPE_NONE>,
<GIC_SPI 45 IRQ_TYPE_NONE>,
<GIC_SPI 42 IRQ_TYPE_NONE>,
<GIC_SPI 46 IRQ_TYPE_NONE>,
<GIC_SPI 43 IRQ_TYPE_NONE>,
<GIC_SPI 47 IRQ_TYPE_NONE>,
<GIC_SPI 44 IRQ_TYPE_NONE>,
<GIC_SPI 48 IRQ_TYPE_NONE>;
interrupt-names = "IRQGP",
"IRQGPMMU",
"IRQPP0",
"IRQPPMMU0",
"IRQPP1",
"IRQPPMMU1",
"IRQPP2",
"IRQPPMMU2",
"IRQPP3",
"IRQPPMMU3";
clock-names = "gpu-clk";
clocks = <&clk_s_c0_flexgen CLK_ICN_GPU>;
reset-names = "gpu";
resets = <&softreset STIH407_GPU_SOFTRESET>;
};
delta0 {
compatible = "st,st-delta";
clock-names = "delta",
"delta-st231",
"delta-flash-promip";
clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
<&clk_s_c0_flexgen CLK_ST231_DMU>,
<&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
};
h264pp0: h264pp@8c00000 {
compatible = "st,h264pp";
reg = <0x8c00000 0x20000>;
interrupts = <GIC_SPI 53 IRQ_TYPE_NONE>;
clock-names = "clk_h264pp_0";
clocks = <&clk_s_c0_flexgen CLK_PP_DMU>;
};
mali: mali@09f00000 {
compatible = "arm,mali-400";
reg = <0x09f00000 0x10000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_NONE>,
<GIC_SPI 50 IRQ_TYPE_NONE>,
<GIC_SPI 41 IRQ_TYPE_NONE>,
<GIC_SPI 45 IRQ_TYPE_NONE>,
<GIC_SPI 42 IRQ_TYPE_NONE>,
<GIC_SPI 46 IRQ_TYPE_NONE>,
<GIC_SPI 43 IRQ_TYPE_NONE>,
<GIC_SPI 47 IRQ_TYPE_NONE>,
<GIC_SPI 44 IRQ_TYPE_NONE>,
<GIC_SPI 48 IRQ_TYPE_NONE>;
interrupt-names = "IRQGP",
"IRQGPMMU",
"IRQPP0",
"IRQPPMMU0",
"IRQPP1",
"IRQPPMMU1",
"IRQPP2",
"IRQPPMMU2",
"IRQPP3",
"IRQPPMMU3";
clock-names = "gpu-clk";
clocks = <&clk_s_c0_flexgen CLK_ICN_GPU>;
reset-names = "gpu";
resets = <&softreset STIH407_GPU_SOFTRESET>;
};
hva@8c85000{
compatible = "st,st-hva";
reg = <0x8c85000 0x400>, <0x6000000 0x40000>;
reg-names = "hva_registers", "hva_esram";
interrupts = <GIC_SPI 58 IRQ_TYPE_NONE>,
<GIC_SPI 59 IRQ_TYPE_NONE>;
clock-names = "clk_hva";
clocks = <&clk_s_c0_flexgen CLK_HVA>;
};
};
};

2
drivers/mmc/Kconfig
View file

@ -301,7 +301,7 @@ config MMC_SDHCI_SPEAR
config MMC_SDHCI_STI
bool "SDHCI support for STMicroelectronics SoC"
depends on MMC_SDHCI
depends on MMC_SDHCI && OF_CONTROL
help
This selects the Secure Digital Host Controller Interface (SDHCI)
on STMicroelectronics STiH410 SoC.

90
include/dt-bindings/clock/stih407-clks.h Normal file
View file

@ -0,0 +1,90 @@
/*
* This header provides constants clk index STMicroelectronics
* STiH407 SoC.
*/
#ifndef _DT_BINDINGS_CLK_STIH407
#define _DT_BINDINGS_CLK_STIH407
/* CLOCKGEN A0 */
#define CLK_IC_LMI0 0
#define CLK_IC_LMI1 1
/* CLOCKGEN C0 */
#define CLK_ICN_GPU 0
#define CLK_FDMA 1
#define CLK_NAND 2
#define CLK_HVA 3
#define CLK_PROC_STFE 4
#define CLK_PROC_TP 5
#define CLK_RX_ICN_DMU 6
#define CLK_RX_ICN_DISP_0 6
#define CLK_RX_ICN_DISP_1 6
#define CLK_RX_ICN_HVA 7
#define CLK_RX_ICN_TS 7
#define CLK_ICN_CPU 8
#define CLK_TX_ICN_DMU 9
#define CLK_TX_ICN_HVA 9
#define CLK_TX_ICN_TS 9
#define CLK_ICN_COMPO 9
#define CLK_MMC_0 10
#define CLK_MMC_1 11
#define CLK_JPEGDEC 12
#define CLK_ICN_REG 13
#define CLK_TRACE_A9 13
#define CLK_PTI_STM 13
#define CLK_EXT2F_A9 13
#define CLK_IC_BDISP_0 14
#define CLK_IC_BDISP_1 15
#define CLK_PP_DMU 16
#define CLK_VID_DMU 17
#define CLK_DSS_LPC 18
#define CLK_ST231_AUD_0 19
#define CLK_ST231_GP_0 19
#define CLK_ST231_GP_1 20
#define CLK_ST231_DMU 21
#define CLK_ICN_LMI 22
#define CLK_TX_ICN_DISP_0 23
#define CLK_TX_ICN_DISP_1 23
#define CLK_ICN_SBC 24
#define CLK_STFE_FRC2 25
#define CLK_ETH_PHY 26
#define CLK_ETH_REF_PHYCLK 27
#define CLK_FLASH_PROMIP 28
#define CLK_MAIN_DISP 29
#define CLK_AUX_DISP 30
#define CLK_COMPO_DVP 31
/* CLOCKGEN D0 */
#define CLK_PCM_0 0
#define CLK_PCM_1 1
#define CLK_PCM_2 2
#define CLK_SPDIFF 3
/* CLOCKGEN D2 */
#define CLK_PIX_MAIN_DISP 0
#define CLK_PIX_PIP 1
#define CLK_PIX_GDP1 2
#define CLK_PIX_GDP2 3
#define CLK_PIX_GDP3 4
#define CLK_PIX_GDP4 5
#define CLK_PIX_AUX_DISP 6
#define CLK_DENC 7
#define CLK_PIX_HDDAC 8
#define CLK_HDDAC 9
#define CLK_SDDAC 10
#define CLK_PIX_DVO 11
#define CLK_DVO 12
#define CLK_PIX_HDMI 13
#define CLK_TMDS_HDMI 14
#define CLK_REF_HDMIPHY 15
/* CLOCKGEN D3 */
#define CLK_STFE_FRC1 0
#define CLK_TSOUT_0 1
#define CLK_TSOUT_1 2
#define CLK_MCHI 3
#define CLK_VSENS_COMPO 4
#define CLK_FRC1_REMOTE 5
#define CLK_LPC_0 6
#define CLK_LPC_1 7
#endif

25
include/dt-bindings/clock/stih410-clks.h Normal file
View file

@ -0,0 +1,25 @@
/*
* This header provides constants clk index STMicroelectronics
* STiH410 SoC.
*/
#ifndef _DT_BINDINGS_CLK_STIH410
#define _DT_BINDINGS_CLK_STIH410
#include "stih407-clks.h"
/* STiH410 introduces new clock outputs compared to STiH407 */
/* CLOCKGEN C0 */
#define CLK_TX_ICN_HADES 32
#define CLK_RX_ICN_HADES 33
#define CLK_ICN_REG_16 34
#define CLK_PP_HADES 35
#define CLK_CLUST_HADES 36
#define CLK_HWPE_HADES 37
#define CLK_FC_HADES 38
/* CLOCKGEN D0 */
#define CLK_PCMR10_MASTER 4
#define CLK_USB2_PHY 5
#endif

30
include/dt-bindings/interrupt-controller/irq-st.h Normal file
View file

@ -0,0 +1,30 @@
/*
* include/linux/irqchip/irq-st.h
*
* Copyright (C) 2014 STMicroelectronics All Rights Reserved
*
* Author: Lee Jones <lee.jones@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_ST_H
#define _DT_BINDINGS_INTERRUPT_CONTROLLER_ST_H
#define ST_IRQ_SYSCFG_EXT_0 0
#define ST_IRQ_SYSCFG_EXT_1 1
#define ST_IRQ_SYSCFG_EXT_2 2
#define ST_IRQ_SYSCFG_CTI_0 3
#define ST_IRQ_SYSCFG_CTI_1 4
#define ST_IRQ_SYSCFG_PMU_0 5
#define ST_IRQ_SYSCFG_PMU_1 6
#define ST_IRQ_SYSCFG_pl310_L2 7
#define ST_IRQ_SYSCFG_DISABLED 0xFFFFFFFF
#define ST_IRQ_SYSCFG_EXT_1_INV 0x1
#define ST_IRQ_SYSCFG_EXT_2_INV 0x2
#define ST_IRQ_SYSCFG_EXT_3_INV 0x4
#endif

16
include/dt-bindings/mfd/st-lpc.h Normal file
View file

@ -0,0 +1,16 @@
/*
* This header provides shared DT/Driver defines for ST's LPC device
*
* Copyright (C) 2014 STMicroelectronics -- All Rights Reserved
*
* Author: Lee Jones <lee.jones@linaro.org> for STMicroelectronics
*/
#ifndef __DT_BINDINGS_ST_LPC_H__
#define __DT_BINDINGS_ST_LPC_H__
#define ST_LPC_MODE_RTC 0
#define ST_LPC_MODE_WDT 1
#define ST_LPC_MODE_CLKSRC 2
#endif /* __DT_BINDINGS_ST_LPC_H__ */

65
include/dt-bindings/reset/stih407-resets.h Normal file
View file

@ -0,0 +1,65 @@
/*
* This header provides constants for the reset controller
* based peripheral powerdown requests on the STMicroelectronics
* STiH407 SoC.
*/
#ifndef _DT_BINDINGS_RESET_CONTROLLER_STIH407
#define _DT_BINDINGS_RESET_CONTROLLER_STIH407
/* Powerdown requests control 0 */
#define STIH407_EMISS_POWERDOWN 0
#define STIH407_NAND_POWERDOWN 1
/* Synp GMAC PowerDown */
#define STIH407_ETH1_POWERDOWN 2
/* Powerdown requests control 1 */
#define STIH407_USB3_POWERDOWN 3
#define STIH407_USB2_PORT1_POWERDOWN 4
#define STIH407_USB2_PORT0_POWERDOWN 5
#define STIH407_PCIE1_POWERDOWN 6
#define STIH407_PCIE0_POWERDOWN 7
#define STIH407_SATA1_POWERDOWN 8
#define STIH407_SATA0_POWERDOWN 9
/* Reset defines */
#define STIH407_ETH1_SOFTRESET 0
#define STIH407_MMC1_SOFTRESET 1
#define STIH407_PICOPHY_SOFTRESET 2
#define STIH407_IRB_SOFTRESET 3
#define STIH407_PCIE0_SOFTRESET 4
#define STIH407_PCIE1_SOFTRESET 5
#define STIH407_SATA0_SOFTRESET 6
#define STIH407_SATA1_SOFTRESET 7
#define STIH407_MIPHY0_SOFTRESET 8
#define STIH407_MIPHY1_SOFTRESET 9
#define STIH407_MIPHY2_SOFTRESET 10
#define STIH407_SATA0_PWR_SOFTRESET 11
#define STIH407_SATA1_PWR_SOFTRESET 12
#define STIH407_DELTA_SOFTRESET 13
#define STIH407_BLITTER_SOFTRESET 14
#define STIH407_HDTVOUT_SOFTRESET 15
#define STIH407_HDQVDP_SOFTRESET 16
#define STIH407_VDP_AUX_SOFTRESET 17
#define STIH407_COMPO_SOFTRESET 18
#define STIH407_HDMI_TX_PHY_SOFTRESET 19
#define STIH407_JPEG_DEC_SOFTRESET 20
#define STIH407_VP8_DEC_SOFTRESET 21
#define STIH407_GPU_SOFTRESET 22
#define STIH407_HVA_SOFTRESET 23
#define STIH407_ERAM_HVA_SOFTRESET 24
#define STIH407_LPM_SOFTRESET 25
#define STIH407_KEYSCAN_SOFTRESET 26
#define STIH407_USB2_PORT0_SOFTRESET 27
#define STIH407_USB2_PORT1_SOFTRESET 28
#define STIH407_ST231_AUD_SOFTRESET 29
#define STIH407_ST231_DMU_SOFTRESET 30
#define STIH407_ST231_GP0_SOFTRESET 31
#define STIH407_ST231_GP1_SOFTRESET 32
/* Picophy reset defines */
#define STIH407_PICOPHY0_RESET 0
#define STIH407_PICOPHY1_RESET 1
#define STIH407_PICOPHY2_RESET 2
#endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH407 */