GitHub-Mirror/u-boot
2
0
Fork 0
mirror of https://github.com/Fishwaldo/u-boot.git synced 2025-03-18 21:21:37 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

omap24xx_i2c: add 2-byte address support

Browse source 
Various devices like EEPROMs require 2-byte address support to
be properly accessed. This patch adds this support for OMAP2/3/4
I2C controller driver.
I've tested it with EEPROM (16 bit address) and TPS65217 chip
(8 bit address) on TI Beaglebone board.

Unfortunately I don't have access to any compatible hardware
with 16bit data register so I can't test if those #ifdef
clauses really work.

CC: Tom Rini <trini@ti.com>
Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
This commit is contained in:
Ilya Yanok 2012-06-08 03:12:09 +00:00 • committed by Albert ARIBAUD
parent 27e301e5b7
commit 55faa58976
1 changed files with 26 additions and 32 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

58
drivers/i2c/omap24xx_i2c.c
View file

@ -150,16 +150,19 @@ void i2c_init(int speed, int slaveadd)
bus_initialized[current_bus] = 1; bus_initialized[current_bus] = 1;
} }
static int i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value) static int i2c_read_byte(u8 devaddr, u16 regoffset, u8 alen, u8 *value)
{ {
int i2c_error = 0; int i2c_error = 0;
u16 status; u16 status;
int i = 2 - alen;
u8 tmpbuf[2] = {(regoffset) >> 8, regoffset & 0xff};
u16 w;
/* wait until bus not busy */ /* wait until bus not busy */
wait_for_bb(); wait_for_bb();
/* one byte only */ /* one byte only */
writew(1, &i2c_base->cnt); writew(alen, &i2c_base->cnt);
/* set slave address */ /* set slave address */
writew(devaddr, &i2c_base->sa); writew(devaddr, &i2c_base->sa);
/* no stop bit needed here */ /* no stop bit needed here */
@ -174,8 +177,12 @@ static int i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value)
goto read_exit; goto read_exit;
} }
if (status & I2C_STAT_XRDY) { if (status & I2C_STAT_XRDY) {
/* Important: have to use byte access */ w = tmpbuf[i++];
writeb(regoffset, &i2c_base->data); #if !(defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX))
w |= tmpbuf[i++] << 8;
#endif
writew(w, &i2c_base->data);
writew(I2C_STAT_XRDY, &i2c_base->stat); writew(I2C_STAT_XRDY, &i2c_base->stat);
} }
if (status & I2C_STAT_ARDY) { if (status & I2C_STAT_ARDY) {
@ -303,18 +310,18 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
{ {
int i; int i;
if (alen > 1) { if (alen > 2) {
printf("I2C read: addr len %d not supported\n", alen); printf("I2C read: addr len %d not supported\n", alen);
return 1; return 1;
} }
if (addr + len > 256) { if (addr + len > (1 << 16)) {
puts("I2C read: address out of range\n"); puts("I2C read: address out of range\n");
return 1; return 1;
} }
for (i = 0; i < len; i++) { for (i = 0; i < len; i++) {
if (i2c_read_byte(chip, addr + i, &buffer[i])) { if (i2c_read_byte(chip, addr + i, alen, &buffer[i])) {
puts("I2C read: I/O error\n"); puts("I2C read: I/O error\n");
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
return 1; return 1;
@ -329,13 +336,15 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
int i; int i;
u16 status; u16 status;
int i2c_error = 0; int i2c_error = 0;
u16 w;
u8 tmpbuf[2] = {addr >> 8, addr & 0xff};
if (alen > 1) { if (alen > 2) {
printf("I2C write: addr len %d not supported\n", alen); printf("I2C write: addr len %d not supported\n", alen);
return 1; return 1;
} }
if (addr + len > 256) { if (addr + len > (1 << 16)) {
printf("I2C write: address 0x%x + 0x%x out of range\n", printf("I2C write: address 0x%x + 0x%x out of range\n",
addr, len); addr, len);
return 1; return 1;
@ -353,28 +362,8 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX | writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
I2C_CON_STP, &i2c_base->con); I2C_CON_STP, &i2c_base->con);
/* Send address byte */ /* Send address and data */
status = wait_for_pin(); for (i = -alen; i < len; i++) {
if (status == 0 || status & I2C_STAT_NACK) {
i2c_error = 1;
printf("error waiting for i2c address ACK (status=0x%x)\n",
status);
goto write_exit;
}
if (status & I2C_STAT_XRDY) {
writeb(addr & 0xFF, &i2c_base->data);
writew(I2C_STAT_XRDY, &i2c_base->stat);
} else {
i2c_error = 1;
printf("i2c bus not ready for transmit (status=0x%x)\n",
status);
goto write_exit;
}
/* address phase is over, now write data */
for (i = 0; i < len; i++) {
status = wait_for_pin(); status = wait_for_pin();
if (status == 0 || status & I2C_STAT_NACK) { if (status == 0 || status & I2C_STAT_NACK) {
@ -385,7 +374,12 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
} }
if (status & I2C_STAT_XRDY) { if (status & I2C_STAT_XRDY) {
writeb(buffer[i], &i2c_base->data); w = (i < 0) ? tmpbuf[2+i] : buffer[i];
#if !(defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX))
w |= ((++i < 0) ? tmpbuf[2+i] : buffer[i]) << 8;
#endif
writew(w, &i2c_base->data);
writew(I2C_STAT_XRDY, &i2c_base->stat); writew(I2C_STAT_XRDY, &i2c_base->stat);
} else { } else {
i2c_error = 1; i2c_error = 1;