GitHub-Mirror/u-boot
2
0
Fork 0
mirror of https://github.com/Fishwaldo/u-boot.git synced 2025-03-21 22:51:37 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO bus

Browse source 
The current TSEC driver limits MDIO access to the devices that have been configured as attached
to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands.

Signed-off-by: Michael Firth <michael.firth@bt.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
This commit is contained in:
michael.firth@bt.com 2008-01-16 11:40:51 +00:00 • committed by Ben Warren
parent 2465665b73
commit 55fe7c57a8
1 changed files with 12 additions and 20 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

32
drivers/net/tsec.c
View file

@ -241,10 +241,9 @@ int tsec_init(struct eth_device *dev, bd_t * bd)
* It will wait for the write to be done (or for a timeout to
* expire) before exiting
*/
void write_phy_reg(struct tsec_private *priv, uint regnum, uint value)
void write_any_phy_reg(struct tsec_private *priv, uint phyid, uint regnum, uint value)
{
volatile tsec_t *regbase = priv->phyregs;
uint phyid = priv->phyaddr;
int timeout = 1000000;
regbase->miimadd = (phyid << 8) | regnum;
@ -255,17 +254,19 @@ void write_phy_reg(struct tsec_private *priv, uint regnum, uint value)
while ((regbase->miimind & MIIMIND_BUSY) && timeout--) ;
}
/* #define to provide old write_phy_reg functionality without duplicating code */
#define write_phy_reg(priv, regnum, value) write_any_phy_reg(priv,priv->phyaddr,regnum,value)
/* Reads register regnum on the device's PHY through the
* registers specified in priv. It lowers and raises the read
* command, and waits for the data to become valid (miimind
* notvalid bit cleared), and the bus to cease activity (miimind
* busy bit cleared), and then returns the value
*/
uint read_phy_reg(struct tsec_private *priv, uint regnum)
uint read_any_phy_reg(struct tsec_private *priv, uint phyid, uint regnum)
{
uint value;
volatile tsec_t *regbase = priv->phyregs;
uint phyid = priv->phyaddr;
/* Put the address of the phy, and the register
* number into MIIMADD */
@ -288,6 +289,9 @@ uint read_phy_reg(struct tsec_private *priv, uint regnum)
return value;
}
/* #define to provide old read_phy_reg functionality without duplicating code */
#define read_phy_reg(priv,regnum) read_any_phy_reg(priv,priv->phyaddr,regnum)
/* Discover which PHY is attached to the device, and configure it
* properly. If the PHY is not recognized, then return 0
* (failure). Otherwise, return 1
@ -1497,18 +1501,6 @@ static void relocate_cmds(void)
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
&& !defined(BITBANGMII)
struct tsec_private *get_priv_for_phy(unsigned char phyaddr)
{
int i;
for (i = 0; i < MAXCONTROLLERS; i++) {
if (privlist[i]->phyaddr == phyaddr)
return privlist[i];
}
return NULL;
}
/*
* Read a MII PHY register.
*
@ -1519,14 +1511,14 @@ static int tsec_miiphy_read(char *devname, unsigned char addr,
unsigned char reg, unsigned short *value)
{
unsigned short ret;
struct tsec_private *priv = get_priv_for_phy(addr);
struct tsec_private *priv = privlist[0];
if (NULL == priv) {
printf("Can't read PHY at address %d\n", addr);
return -1;
}
ret = (unsigned short)read_phy_reg(priv, reg);
ret = (unsigned short)read_any_phy_reg(priv, addr, reg);
*value = ret;
return 0;
@ -1541,14 +1533,14 @@ static int tsec_miiphy_read(char *devname, unsigned char addr,
static int tsec_miiphy_write(char *devname, unsigned char addr,
unsigned char reg, unsigned short value)
{
struct tsec_private *priv = get_priv_for_phy(addr);
struct tsec_private *priv = privlist[0];
if (NULL == priv) {
printf("Can't write PHY at address %d\n", addr);
return -1;
}
write_phy_reg(priv, reg, value);
write_any_phy_reg(priv, addr, reg, value);
return 0;
}