mirror of
https://github.com/Fishwaldo/u-boot.git
synced 2025-03-19 13:41:31 +00:00
nios2: remove obsolete PCI5441 and PK1C20 boards
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
This commit is contained in:
Thomas Chou
parent
00a2517fcb
commit
70fbc46192
17 changed files with 0 additions and 749 deletions
|
|
@ -11,16 +11,8 @@ choice
|
||||||
config TARGET_NIOS2_GENERIC
|
config TARGET_NIOS2_GENERIC
|
||||||
bool "Support nios2-generic"
|
bool "Support nios2-generic"
|
||||||
|
|
||||||
config TARGET_PCI5441
|
|
||||||
bool "Support PCI5441"
|
|
||||||
|
|
||||||
config TARGET_PK1C20
|
|
||||||
bool "Support PK1C20"
|
|
||||||
|
|
||||||
endchoice
|
endchoice
|
||||||
|
|
||||||
source "board/altera/nios2-generic/Kconfig"
|
source "board/altera/nios2-generic/Kconfig"
|
||||||
source "board/psyent/pci5441/Kconfig"
|
|
||||||
source "board/psyent/pk1c20/Kconfig"
|
|
||||||
|
|
||||||
endmenu
|
endmenu
|
||||||
|
|
|
||||||
|
|
@ -1,170 +0,0 @@
|
||||||
/*
|
|
||||||
* (C) Copyright 2000-2004
|
|
||||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
#include <common.h>
|
|
||||||
#include <asm/io.h>
|
|
||||||
|
|
||||||
#define SECTSZ (64 * 1024)
|
|
||||||
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
|
|
||||||
|
|
||||||
/*----------------------------------------------------------------------*/
|
|
||||||
unsigned long flash_init (void)
|
|
||||||
{
|
|
||||||
int i;
|
|
||||||
unsigned long addr;
|
|
||||||
flash_info_t *fli = &flash_info[0];
|
|
||||||
|
|
||||||
fli->size = CONFIG_SYS_FLASH_SIZE;
|
|
||||||
fli->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
|
|
||||||
fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D;
|
|
||||||
|
|
||||||
addr = CONFIG_SYS_FLASH_BASE;
|
|
||||||
for (i = 0; i < fli->sector_count; ++i) {
|
|
||||||
fli->start[i] = addr;
|
|
||||||
addr += SECTSZ;
|
|
||||||
fli->protect[i] = 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
return (CONFIG_SYS_FLASH_SIZE);
|
|
||||||
}
|
|
||||||
/*--------------------------------------------------------------------*/
|
|
||||||
void flash_print_info (flash_info_t * info)
|
|
||||||
{
|
|
||||||
int i, k;
|
|
||||||
int erased;
|
|
||||||
unsigned long *addr;
|
|
||||||
|
|
||||||
printf (" Size: %ld KB in %d Sectors\n",
|
|
||||||
info->size >> 10, info->sector_count);
|
|
||||||
printf (" Sector Start Addresses:");
|
|
||||||
for (i = 0; i < info->sector_count; ++i) {
|
|
||||||
|
|
||||||
/* Check if whole sector is erased */
|
|
||||||
erased = 1;
|
|
||||||
addr = (unsigned long *) info->start[i];
|
|
||||||
for (k = 0; k < SECTSZ/sizeof(unsigned long); k++) {
|
|
||||||
if ( readl(addr++) != (unsigned long)-1) {
|
|
||||||
erased = 0;
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Print the info */
|
|
||||||
if ((i % 5) == 0)
|
|
||||||
printf ("\n ");
|
|
||||||
printf (" %08lX%s%s",
|
|
||||||
info->start[i],
|
|
||||||
erased ? " E" : " ",
|
|
||||||
info->protect[i] ? "RO " : " ");
|
|
||||||
}
|
|
||||||
printf ("\n");
|
|
||||||
}
|
|
||||||
|
|
||||||
/*-------------------------------------------------------------------*/
|
|
||||||
|
|
||||||
|
|
||||||
int flash_erase (flash_info_t * info, int s_first, int s_last)
|
|
||||||
{
|
|
||||||
unsigned char *addr = (unsigned char *) info->start[0];
|
|
||||||
unsigned char *addr2;
|
|
||||||
int prot, sect;
|
|
||||||
ulong start;
|
|
||||||
|
|
||||||
/* Some sanity checking */
|
|
||||||
if ((s_first < 0) || (s_first > s_last)) {
|
|
||||||
printf ("- no sectors to erase\n");
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
prot = 0;
|
|
||||||
for (sect = s_first; sect <= s_last; ++sect) {
|
|
||||||
if (info->protect[sect]) {
|
|
||||||
prot++;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
if (prot) {
|
|
||||||
printf ("- Warning: %d protected sectors will not be erased!\n",
|
|
||||||
prot);
|
|
||||||
} else {
|
|
||||||
printf ("\n");
|
|
||||||
}
|
|
||||||
|
|
||||||
/* It's ok to erase multiple sectors provided we don't delay more
|
|
||||||
* than 50 usec between cmds ... at which point the erase time-out
|
|
||||||
* occurs. So don't go and put printf() calls in the loop ... it
|
|
||||||
* won't be very helpful ;-)
|
|
||||||
*/
|
|
||||||
for (sect = s_first; sect <= s_last; sect++) {
|
|
||||||
if (info->protect[sect] == 0) { /* not protected */
|
|
||||||
addr2 = (unsigned char *) info->start[sect];
|
|
||||||
writeb (0xaa, addr);
|
|
||||||
writeb (0x55, addr);
|
|
||||||
writeb (0x80, addr);
|
|
||||||
writeb (0xaa, addr);
|
|
||||||
writeb (0x55, addr);
|
|
||||||
writeb (0x30, addr2);
|
|
||||||
/* Now just wait for 0xff & provide some user
|
|
||||||
* feedback while we wait.
|
|
||||||
*/
|
|
||||||
start = get_timer (0);
|
|
||||||
while ( readb (addr2) != 0xff) {
|
|
||||||
udelay (1000 * 1000);
|
|
||||||
putc ('.');
|
|
||||||
if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
|
|
||||||
printf ("timeout\n");
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
printf ("\n");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* Copy memory to flash, returns:
|
|
||||||
* 0 - OK
|
|
||||||
* 1 - write timeout
|
|
||||||
* 2 - Flash not erased
|
|
||||||
*/
|
|
||||||
|
|
||||||
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
|
|
||||||
{
|
|
||||||
|
|
||||||
vu_char *cmd = (vu_char *) info->start[0];
|
|
||||||
vu_char *dst = (vu_char *) addr;
|
|
||||||
unsigned char b;
|
|
||||||
ulong start;
|
|
||||||
|
|
||||||
while (cnt) {
|
|
||||||
/* Check for sufficient erase */
|
|
||||||
b = *src;
|
|
||||||
if ((readb (dst) & b) != b) {
|
|
||||||
printf ("%02x : %02x\n", readb (dst), b);
|
|
||||||
return (2);
|
|
||||||
}
|
|
||||||
|
|
||||||
writeb (0xaa, cmd);
|
|
||||||
writeb (0x55, cmd);
|
|
||||||
writeb (0xa0, cmd);
|
|
||||||
writeb (dst, b);
|
|
||||||
|
|
||||||
/* Verify write */
|
|
||||||
start = get_timer (0);
|
|
||||||
while (readb (dst) != b) {
|
|
||||||
if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
dst++;
|
|
||||||
src++;
|
|
||||||
cnt--;
|
|
||||||
}
|
|
||||||
|
|
||||||
return (0);
|
|
||||||
}
|
|
||||||
|
|
@ -1,15 +0,0 @@
|
||||||
if TARGET_PCI5441
|
|
||||||
|
|
||||||
config SYS_BOARD
|
|
||||||
string
|
|
||||||
default "pci5441"
|
|
||||||
|
|
||||||
config SYS_VENDOR
|
|
||||||
string
|
|
||||||
default "psyent"
|
|
||||||
|
|
||||||
config SYS_CONFIG_NAME
|
|
||||||
string
|
|
||||||
default "PCI5441"
|
|
||||||
|
|
||||||
endif
|
|
||||||
|
|
@ -1,6 +0,0 @@
|
||||||
PCI5441 BOARD
|
|
||||||
M: Scott McNutt <smcnutt@psyent.com>
|
|
||||||
S: Maintained
|
|
||||||
F: board/psyent/pci5441/
|
|
||||||
F: include/configs/PCI5441.h
|
|
||||||
F: configs/PCI5441_defconfig
|
|
||||||
|
|
@ -1,8 +0,0 @@
|
||||||
#
|
|
||||||
# (C) Copyright 2001-2006
|
|
||||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
||||||
#
|
|
||||||
# SPDX-License-Identifier: GPL-2.0+
|
|
||||||
#
|
|
||||||
|
|
||||||
obj-y := pci5441.o ../common/AMDLV065D.o
|
|
||||||
|
|
@ -1,14 +0,0 @@
|
||||||
#
|
|
||||||
# (C) Copyright 2004, Psyent Corporation <www.psyent.com>
|
|
||||||
# Scott McNutt <smcnutt@psyent.com>
|
|
||||||
#
|
|
||||||
# SPDX-License-Identifier: GPL-2.0+
|
|
||||||
#
|
|
||||||
|
|
||||||
CONFIG_SYS_TEXT_BASE = 0x018e0000
|
|
||||||
|
|
||||||
PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
|
|
||||||
|
|
||||||
ifeq ($(debug),1)
|
|
||||||
PLATFORM_CPPFLAGS += -DDEBUG
|
|
||||||
endif
|
|
||||||
|
|
@ -1,24 +0,0 @@
|
||||||
/*
|
|
||||||
* (C) Copyright 2004, Psyent Corporation <www.psyent.com>
|
|
||||||
* Scott McNutt <smcnutt@psyent.com>
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <common.h>
|
|
||||||
|
|
||||||
int board_early_init_f (void)
|
|
||||||
{
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
int checkboard (void)
|
|
||||||
{
|
|
||||||
puts ("BOARD : Psyent PCI-5441\n");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
phys_size_t initdram (int board_type)
|
|
||||||
{
|
|
||||||
return (0);
|
|
||||||
}
|
|
||||||
|
|
@ -1,15 +0,0 @@
|
||||||
if TARGET_PK1C20
|
|
||||||
|
|
||||||
config SYS_BOARD
|
|
||||||
string
|
|
||||||
default "pk1c20"
|
|
||||||
|
|
||||||
config SYS_VENDOR
|
|
||||||
string
|
|
||||||
default "psyent"
|
|
||||||
|
|
||||||
config SYS_CONFIG_NAME
|
|
||||||
string
|
|
||||||
default "PK1C20"
|
|
||||||
|
|
||||||
endif
|
|
||||||
|
|
@ -1,6 +0,0 @@
|
||||||
PK1C20 BOARD
|
|
||||||
M: Scott McNutt <smcnutt@psyent.com>
|
|
||||||
S: Maintained
|
|
||||||
F: board/psyent/pk1c20/
|
|
||||||
F: include/configs/PK1C20.h
|
|
||||||
F: configs/PK1C20_defconfig
|
|
||||||
|
|
@ -1,8 +0,0 @@
|
||||||
#
|
|
||||||
# (C) Copyright 2001-2006
|
|
||||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
||||||
#
|
|
||||||
# SPDX-License-Identifier: GPL-2.0+
|
|
||||||
#
|
|
||||||
|
|
||||||
obj-y := pk1c20.o led.o ../common/AMDLV065D.o
|
|
||||||
|
|
@ -1,14 +0,0 @@
|
||||||
#
|
|
||||||
# (C) Copyright 2004, Psyent Corporation <www.psyent.com>
|
|
||||||
# Scott McNutt <smcnutt@psyent.com>
|
|
||||||
#
|
|
||||||
# SPDX-License-Identifier: GPL-2.0+
|
|
||||||
#
|
|
||||||
|
|
||||||
CONFIG_SYS_TEXT_BASE = 0x01fc0000
|
|
||||||
|
|
||||||
PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
|
|
||||||
|
|
||||||
ifeq ($(debug),1)
|
|
||||||
PLATFORM_CPPFLAGS += -DDEBUG
|
|
||||||
endif
|
|
||||||
|
|
@ -1,46 +0,0 @@
|
||||||
/*
|
|
||||||
* (C) Copyright 2004, Psyent Corporation <www.psyent.com>
|
|
||||||
* Scott McNutt <smcnutt@psyent.com>
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <common.h>
|
|
||||||
#include <asm/io.h>
|
|
||||||
#include <nios2-io.h>
|
|
||||||
#include <status_led.h>
|
|
||||||
|
|
||||||
/* The LED port is configured as output only, so we
|
|
||||||
* must track the state manually.
|
|
||||||
*/
|
|
||||||
static led_id_t val = 0;
|
|
||||||
|
|
||||||
void __led_init (led_id_t mask, int state)
|
|
||||||
{
|
|
||||||
nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
|
|
||||||
|
|
||||||
if (state == STATUS_LED_ON)
|
|
||||||
val &= ~mask;
|
|
||||||
else
|
|
||||||
val |= mask;
|
|
||||||
writel (val, &pio->data);
|
|
||||||
}
|
|
||||||
|
|
||||||
void __led_set (led_id_t mask, int state)
|
|
||||||
{
|
|
||||||
nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
|
|
||||||
|
|
||||||
if (state == STATUS_LED_ON)
|
|
||||||
val &= ~mask;
|
|
||||||
else
|
|
||||||
val |= mask;
|
|
||||||
writel (val, &pio->data);
|
|
||||||
}
|
|
||||||
|
|
||||||
void __led_toggle (led_id_t mask)
|
|
||||||
{
|
|
||||||
nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
|
|
||||||
|
|
||||||
val ^= mask;
|
|
||||||
writel (val, &pio->data);
|
|
||||||
}
|
|
||||||
|
|
@ -1,36 +0,0 @@
|
||||||
/*
|
|
||||||
* (C) Copyright 2004, Psyent Corporation <www.psyent.com>
|
|
||||||
* Scott McNutt <smcnutt@psyent.com>
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <common.h>
|
|
||||||
#include <netdev.h>
|
|
||||||
|
|
||||||
int board_early_init_f (void)
|
|
||||||
{
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
int checkboard (void)
|
|
||||||
{
|
|
||||||
puts ("BOARD : Psyent PK-1C20\n");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
phys_size_t initdram (int board_type)
|
|
||||||
{
|
|
||||||
return (0);
|
|
||||||
}
|
|
||||||
|
|
||||||
#ifdef CONFIG_CMD_NET
|
|
||||||
int board_eth_init(bd_t *bis)
|
|
||||||
{
|
|
||||||
int rc = 0;
|
|
||||||
#ifdef CONFIG_SMC91111
|
|
||||||
rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
|
|
||||||
#endif
|
|
||||||
return rc;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
@ -1,2 +0,0 @@
|
||||||
CONFIG_NIOS2=y
|
|
||||||
CONFIG_TARGET_PCI5441=y
|
|
||||||
|
|
@ -1,2 +0,0 @@
|
||||||
CONFIG_NIOS2=y
|
|
||||||
CONFIG_TARGET_PK1C20=y
|
|
||||||
|
|
@ -1,150 +0,0 @@
|
||||||
/*
|
|
||||||
* (C) Copyright 2004, Psyent Corporation <www.psyent.com>
|
|
||||||
* Scott McNutt <smcnutt@psyent.com>
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifndef __CONFIG_H
|
|
||||||
#define __CONFIG_H
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* BOARD/CPU
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#define CONFIG_PCI5441 1 /* PCI-5441 board */
|
|
||||||
#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_RESET_ADDR 0x00000000 /* Hard-reset address */
|
|
||||||
#define CONFIG_SYS_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/
|
|
||||||
#define CONFIG_SYS_NIOS_SYSID_BASE 0x00920828 /* System id address */
|
|
||||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* CACHE -- the following will support II/s and II/f. The II/s does not
|
|
||||||
* have dcache, so the cache instructions will behave as NOPs.
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#define CONFIG_SYS_ICACHE_SIZE 4096 /* 4 KByte total */
|
|
||||||
#define CONFIG_SYS_ICACHELINE_SIZE 32 /* 32 bytes/line */
|
|
||||||
#define CONFIG_SYS_DCACHE_SIZE 2048 /* 2 KByte (II/f) */
|
|
||||||
#define CONFIG_SYS_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* MEMORY BASE ADDRESSES
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#define CONFIG_SYS_FLASH_BASE 0x00000000 /* FLASH base addr */
|
|
||||||
#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* 8 MByte */
|
|
||||||
#define CONFIG_SYS_SDRAM_BASE 0x01000000 /* SDRAM base addr */
|
|
||||||
#define CONFIG_SYS_SDRAM_SIZE 0x01000000 /* 16 MByte */
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* MEMORY ORGANIZATION
|
|
||||||
* -Monitor at top.
|
|
||||||
* -The heap is placed below the monitor.
|
|
||||||
* -Global data is placed below the heap.
|
|
||||||
* -The stack is placed below global data (&grows down).
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#define CONFIG_SYS_MONITOR_LEN (128 * 1024) /* Reserve 128k */
|
|
||||||
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
|
|
||||||
|
|
||||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
||||||
#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
|
|
||||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - GENERATED_GBL_DATA_SIZE)
|
|
||||||
#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* FLASH (AM29LV065D)
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */
|
|
||||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */
|
|
||||||
#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
|
|
||||||
#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
|
|
||||||
#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char /* flash word size */
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
|
|
||||||
* CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
|
|
||||||
* reset address, no? This will keep the environment in user region
|
|
||||||
* of flash. NOTE: the monitor length must be multiple of sector size
|
|
||||||
* (which is common practice).
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */
|
|
||||||
#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
|
|
||||||
#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
|
|
||||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_RESET_ADDR + CONFIG_SYS_MONITOR_LEN)
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* CONSOLE
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#define CONFIG_ALTERA_UART 1 /* Use altera uart */
|
|
||||||
#if defined(CONFIG_ALTERA_JTAG_UART)
|
|
||||||
#define CONFIG_SYS_NIOS_CONSOLE 0x00920820 /* JTAG UART base addr */
|
|
||||||
#else
|
|
||||||
#define CONFIG_SYS_NIOS_CONSOLE 0x009208a0 /* UART base addr */
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
|
|
||||||
#define CONFIG_BAUDRATE 115200 /* Initial baudrate */
|
|
||||||
#define CONFIG_SYS_BAUDRATE_TABLE {115200} /* It's fixed ;-) */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* Suppress console info*/
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* DEBUG
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#undef CONFIG_ROM_STUBS /* Stubs not in ROM */
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* TIMEBASE --
|
|
||||||
*
|
|
||||||
* The high res timer defaults to 1 msec. Since it includes the period
|
|
||||||
* registers, the interrupt frequency can be reduced using TMRCNT.
|
|
||||||
* If the default period is acceptable, TMRCNT can be left undefined.
|
|
||||||
* TMRMS represents the desired mecs per tick (msecs per interrupt).
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#define CONFIG_SYS_LOW_RES_TIMER
|
|
||||||
#define CONFIG_SYS_NIOS_TMRBASE 0x00920860 /* Tick timer base addr */
|
|
||||||
#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */
|
|
||||||
#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period (msec)*/
|
|
||||||
#define CONFIG_SYS_NIOS_TMRCNT \
|
|
||||||
(CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
|
|
||||||
|
|
||||||
|
|
||||||
/*
|
|
||||||
* BOOTP options
|
|
||||||
*/
|
|
||||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
||||||
#define CONFIG_BOOTP_BOOTPATH
|
|
||||||
#define CONFIG_BOOTP_GATEWAY
|
|
||||||
#define CONFIG_BOOTP_HOSTNAME
|
|
||||||
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Command line configuration.
|
|
||||||
*/
|
|
||||||
#define CONFIG_CMD_BDI
|
|
||||||
#define CONFIG_CMD_ECHO
|
|
||||||
#define CONFIG_CMD_SAVEENV
|
|
||||||
#define CONFIG_CMD_FLASH
|
|
||||||
#define CONFIG_CMD_IMI
|
|
||||||
#define CONFIG_CMD_IRQ
|
|
||||||
#define CONFIG_CMD_LOADS
|
|
||||||
#define CONFIG_CMD_LOADB
|
|
||||||
#define CONFIG_CMD_MEMORY
|
|
||||||
#define CONFIG_CMD_MISC
|
|
||||||
#define CONFIG_CMD_RUN
|
|
||||||
#define CONFIG_CMD_SAVES
|
|
||||||
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* MISC
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#define CONFIG_SYS_LONGHELP /* Provide extended help*/
|
|
||||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */
|
|
||||||
#define CONFIG_SYS_MAXARGS 16 /* Max command args */
|
|
||||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg buf size */
|
|
||||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buf size */
|
|
||||||
#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* Default load address */
|
|
||||||
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* Start addr for test */
|
|
||||||
#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_INIT_SP - 0x00020000
|
|
||||||
|
|
||||||
#endif /* __CONFIG_H */
|
|
||||||
|
|
@ -1,225 +0,0 @@
|
||||||
/*
|
|
||||||
* (C) Copyright 2004, Psyent Corporation <www.psyent.com>
|
|
||||||
* Scott McNutt <smcnutt@psyent.com>
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifndef __CONFIG_H
|
|
||||||
#define __CONFIG_H
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* BOARD/CPU
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#define CONFIG_PK1C20 1 /* PK1C20 board */
|
|
||||||
#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_RESET_ADDR 0x00000000 /* Hard-reset address */
|
|
||||||
#define CONFIG_SYS_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/
|
|
||||||
#define CONFIG_SYS_NIOS_SYSID_BASE 0x021208b8 /* System id address */
|
|
||||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* CACHE -- the following will support II/s and II/f. The II/s does not
|
|
||||||
* have dcache, so the cache instructions will behave as NOPs.
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#define CONFIG_SYS_ICACHE_SIZE 4096 /* 4 KByte total */
|
|
||||||
#define CONFIG_SYS_ICACHELINE_SIZE 32 /* 32 bytes/line */
|
|
||||||
#define CONFIG_SYS_DCACHE_SIZE 2048 /* 2 KByte (II/f) */
|
|
||||||
#define CONFIG_SYS_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* MEMORY BASE ADDRESSES
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#define CONFIG_SYS_FLASH_BASE 0x00000000 /* FLASH base addr */
|
|
||||||
#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* 8 MByte */
|
|
||||||
#define CONFIG_SYS_SDRAM_BASE 0x01000000 /* SDRAM base addr */
|
|
||||||
#define CONFIG_SYS_SDRAM_SIZE 0x01000000 /* 16 MByte */
|
|
||||||
#define CONFIG_SYS_SRAM_BASE 0x02000000 /* SRAM base addr */
|
|
||||||
#define CONFIG_SYS_SRAM_SIZE 0x00100000 /* 1 MB (only 1M mapped)*/
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* MEMORY ORGANIZATION
|
|
||||||
* -Monitor at top.
|
|
||||||
* -The heap is placed below the monitor.
|
|
||||||
* -Global data is placed below the heap.
|
|
||||||
* -The stack is placed below global data (&grows down).
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 128k */
|
|
||||||
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
|
|
||||||
|
|
||||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
||||||
#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
|
|
||||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - GENERATED_GBL_DATA_SIZE)
|
|
||||||
#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* FLASH (AM29LV065D)
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */
|
|
||||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */
|
|
||||||
#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
|
|
||||||
#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
|
|
||||||
#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char /* flash word size */
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
|
|
||||||
* CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
|
|
||||||
* reset address, no? This will keep the environment in user region
|
|
||||||
* of flash. NOTE: the monitor length must be multiple of sector size
|
|
||||||
* (which is common practice).
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */
|
|
||||||
#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
|
|
||||||
#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
|
|
||||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_RESET_ADDR + CONFIG_SYS_MONITOR_LEN)
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* CONSOLE
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#define CONFIG_ALTERA_UART 1 /* Use altera uart */
|
|
||||||
#if defined(CONFIG_ALTERA_JTAG_UART)
|
|
||||||
#define CONFIG_SYS_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */
|
|
||||||
#else
|
|
||||||
#define CONFIG_SYS_NIOS_CONSOLE 0x02120840 /* UART base addr */
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
|
|
||||||
#define CONFIG_BAUDRATE 115200 /* Initial baudrate */
|
|
||||||
#define CONFIG_SYS_BAUDRATE_TABLE {115200} /* It's fixed ;-) */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* Suppress console info*/
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* EPCS Device -- wne CONFIG_SYS_NIOS_EPCSBASE is defined code/commands for
|
|
||||||
* epcs device access is enabled. The base address is the epcs
|
|
||||||
* _register_ base address, NOT THE ADDRESS OF THE MEMORY BLOCK.
|
|
||||||
* The register base is currently at offset 0x600 from the memory base.
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#define CONFIG_SYS_NIOS_EPCSBASE 0x02100200 /* EPCS register base */
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* DEBUG
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#undef CONFIG_ROM_STUBS /* Stubs not in ROM */
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* TIMEBASE --
|
|
||||||
*
|
|
||||||
* The high res timer defaults to 1 msec. Since it includes the period
|
|
||||||
* registers, the interrupt frequency can be reduced using TMRCNT.
|
|
||||||
* If the default period is acceptable, TMRCNT can be left undefined.
|
|
||||||
* TMRMS represents the desired mecs per tick (msecs per interrupt).
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#define CONFIG_SYS_LOW_RES_TIMER
|
|
||||||
#define CONFIG_SYS_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */
|
|
||||||
#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */
|
|
||||||
#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period */
|
|
||||||
#define CONFIG_SYS_NIOS_TMRCNT \
|
|
||||||
(CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* STATUS LED -- Provides a simple blinking led. For Nios2 each board
|
|
||||||
* must implement its own led routines -- leds are, after all,
|
|
||||||
* board-specific, no?
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#define CONFIG_SYS_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */
|
|
||||||
#define CONFIG_STATUS_LED /* Enable status driver */
|
|
||||||
#define CONFIG_BOARD_SPECIFIC_LED
|
|
||||||
|
|
||||||
#define STATUS_LED_BIT 1 /* Bit-0 on PIO */
|
|
||||||
#define STATUS_LED_STATE 1 /* Blinking */
|
|
||||||
#define STATUS_LED_PERIOD (500/CONFIG_SYS_NIOS_TMRMS) /* Every 500 msec */
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* ETHERNET -- The header file for the SMC91111 driver hurts my eyes ...
|
|
||||||
* and really doesn't need any additional clutter. So I choose the lazy
|
|
||||||
* way out to avoid changes there -- define the base address to ensure
|
|
||||||
* cache bypass so there's no need to monkey with inx/outx macros.
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */
|
|
||||||
#define CONFIG_SMC91111 /* Using SMC91c111 */
|
|
||||||
#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
|
|
||||||
#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */
|
|
||||||
|
|
||||||
#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
|
|
||||||
#define CONFIG_NETMASK 255.255.255.0
|
|
||||||
#define CONFIG_IPADDR 192.168.2.21
|
|
||||||
#define CONFIG_SERVERIP 192.168.2.16
|
|
||||||
|
|
||||||
|
|
||||||
/*
|
|
||||||
* BOOTP options
|
|
||||||
*/
|
|
||||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
||||||
#define CONFIG_BOOTP_BOOTPATH
|
|
||||||
#define CONFIG_BOOTP_GATEWAY
|
|
||||||
#define CONFIG_BOOTP_HOSTNAME
|
|
||||||
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Command line configuration.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define CONFIG_CMD_BDI
|
|
||||||
#define CONFIG_CMD_DHCP
|
|
||||||
#define CONFIG_CMD_ECHO
|
|
||||||
#define CONFIG_CMD_SAVEENV
|
|
||||||
#define CONFIG_CMD_FLASH
|
|
||||||
#define CONFIG_CMD_IMI
|
|
||||||
#define CONFIG_CMD_IRQ
|
|
||||||
#define CONFIG_CMD_LOADS
|
|
||||||
#define CONFIG_CMD_LOADB
|
|
||||||
#define CONFIG_CMD_MEMORY
|
|
||||||
#define CONFIG_CMD_MISC
|
|
||||||
#define CONFIG_CMD_NET
|
|
||||||
#define CONFIG_CMD_PING
|
|
||||||
#define CONFIG_CMD_RUN
|
|
||||||
#define CONFIG_CMD_SAVES
|
|
||||||
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* COMPACT FLASH
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#if defined(CONFIG_CMD_IDE)
|
|
||||||
#define CONFIG_IDE_PREINIT /* Implement id_preinit */
|
|
||||||
#define CONFIG_SYS_IDE_MAXBUS 1 /* 1 IDE bus */
|
|
||||||
#define CONFIG_SYS_IDE_MAXDEVICE 1 /* 1 drive per IDE bus */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_ATA_BASE_ADDR 0x00900800 /* ATA base addr */
|
|
||||||
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 /* IDE0 offset */
|
|
||||||
#define CONFIG_SYS_ATA_DATA_OFFSET 0x0040 /* Data IO offset */
|
|
||||||
#define CONFIG_SYS_ATA_REG_OFFSET 0x0040 /* Register offset */
|
|
||||||
#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 /* Alternate reg offset */
|
|
||||||
#define CONFIG_SYS_ATA_STRIDE 4 /* Width betwix addrs */
|
|
||||||
#define CONFIG_DOS_PARTITION
|
|
||||||
|
|
||||||
/* Board-specific cf regs */
|
|
||||||
#define CONFIG_SYS_CF_PRESENT 0x00900880 /* CF Present PIO base */
|
|
||||||
#define CONFIG_SYS_CF_POWER 0x00900890 /* CF Power FET PIO base*/
|
|
||||||
#define CONFIG_SYS_CF_ATASEL 0x009008a0 /* CF ATASEL PIO base */
|
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* JFFS2
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#if defined(CONFIG_CMD_JFFS2)
|
|
||||||
#define CONFIG_SYS_JFFS_CUSTOM_PART /* board defined part */
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------
|
|
||||||
* MISC
|
|
||||||
*----------------------------------------------------------------------*/
|
|
||||||
#define CONFIG_SYS_LONGHELP /* Provide extended help*/
|
|
||||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */
|
|
||||||
#define CONFIG_SYS_MAXARGS 16 /* Max command args */
|
|
||||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg buf size */
|
|
||||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buf size */
|
|
||||||
#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* Default load address */
|
|
||||||
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* Start addr for test */
|
|
||||||
#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_INIT_SP - 0x00020000
|
|
||||||
|
|
||||||
#define CONFIG_SYS_HUSH_PARSER
|
|
||||||
|
|
||||||
#endif /* __CONFIG_H */
|
|
||||||
Loading…
Add table
Reference in a new issue