powerpc/mpc85xx: Add board support for ucp1020

New QorIQ p1020 based board support from Arcturus Networks Inc.
http://www.arcturusnetworks.com/products/ucp1020/

Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Signed-off-by: Oleksandr G Zhadan <oleks@arcturusnetworks.com>
[York Sun: remove patman tags from commit message]
Reviewed-by: York Sun <yorksun@freescale.com>

arch/powerpc/cpu/mpc85xx/Kconfig

@@ -151,6 +151,9 @@ config TARGET_XPEDITE537X
 config TARGET_XPEDITE550X
 	bool "Support xpedite550x"
 
+config TARGET_UCP1020
+	bool "Support uCP1020"
+
 endchoice
 
 source "board/freescale/b4860qds/Kconfig"
@@ -192,5 +195,6 @@ source "board/stx/stxssa/Kconfig"
 source "board/xes/xpedite520x/Kconfig"
 source "board/xes/xpedite537x/Kconfig"
 source "board/xes/xpedite550x/Kconfig"
+source "board/Arcturus/ucp1020/Kconfig"
 
 endmenu

board/Arcturus/ucp1020/Kconfig

@@ -0,0 +1,44 @@
+if TARGET_UCP1020
+
+config SYS_BOARD
+	string
+	default "ucp1020"
+
+config SYS_VENDOR
+	string
+	default "Arcturus"
+
+config SYS_CONFIG_NAME
+	string
+	default "UCP1020"
+
+config SPI_FLASH
+	bool
+	default y
+
+config SPI_PCI
+	bool
+	default y
+
+choice
+	prompt "Target image select"
+
+config TARGET_UCP1020_NOR
+	bool "NOR flash u-boot image"
+
+config TARGET_UCP1020_SPIFLASH
+	bool "SPI flash u-boot image"
+
+endchoice
+
+if TARGET_UCP1020_SPIFLASH
+config UCBOOT
+	bool
+	default y
+
+config SPIFLASH
+	bool
+	default y
+endif
+
+endif

board/Arcturus/ucp1020/MAINTAINERS

@@ -0,0 +1,7 @@
+UCP1020 BOARD
+M:	Oleksandr Zhadan and Michael Durrant <arcsupport@arcturusnetworks.com>
+S:	Maintained
+F:	board/Arcturus/ucp1020/
+F:	include/configs/UCP1020.h
+F:	configs/UCP1020_defconfig
+F:	configs/UCP1020_SPIFLASH_defconfig

board/Arcturus/ucp1020/Makefile

@@ -0,0 +1,33 @@
+#
+# Copyright 2013-2015 Arcturus Networks, Inc.
+# based on board/freescale/p1_p2_rdb_pc/Makefile
+# original copyright follows:
+# Copyright 2010-2011 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+MINIMAL=
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_INIT_MINIMAL
+MINIMAL=y
+endif
+endif
+
+ifdef MINIMAL
+
+obj-y	+= spl_minimal.o tlb.o law.o
+
+else
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+endif
+
+obj-y        += ucp1020.o
+obj-y        += ddr.o
+obj-y        += law.o
+obj-y        += tlb.o
+obj-y        += cmd_arc.o
+
+endif

board/Arcturus/ucp1020/README

@@ -0,0 +1,54 @@
+The uCP1020 product family (ucp1020) is an Arcturus Networks Inc. System on Modules
+product featuring a Freescale P1020 CPU, optionally populated with 1, 2 or 3 Gig-Ethernet PHYs,
+DDR3, NOR Flash, eMMC NAND Flash and/or SPI Flash.
+
+Information on the generic product family can be found here:
+	http://www.arcturusnetworks.com/products/ucp1020
+
+The UCP1020 several configurable options
+========================================
+
+- the selection of populated phy(s):
+	KSZ9031 (current default for eTSEC 1 and 3)
+
+- the selection of boot location:
+	SPI Flash or NOR flash
+
+The UCP1020 includes 2 default configurations
+=============================================
+NOR boot image:
+	configs/UCP1020_defconfig
+SPI boot image:
+	configs/UCP1020_SPIFLASH_defconfig
+
+The UCP1020 adds an additional command in cmd_arc.c to access and program
+SPI resident factory defaults for serial number, and 1, 2 or 3 Ethernet
+HW Addresses.
+
+
+Build example
+=============
+
+make distclean
+make UCP1020_defconfig
+make
+
+Default Scripts
+===============
+A default upgrade scripts is included in the default environment variable example:
+
+B$ run tftpflash
+
+Dual Environment
+================
+
+This build enables dual / failover environment environment.
+
+NOR Flash Partition declarations and scripts
+============================================
+Several scripts are available to allow TFTP of images and programming directly
+into defined NOR flash partitions. Examples:
+
+B$ run program0
+B$ run program1
+B$ run program2

board/Arcturus/ucp1020/cmd_arc.c

@@ -0,0 +1,231 @@
+/*
+ * Command for accessing Arcturus factory environment.
+ *
+ * Copyright 2013-2015 Arcturus Networks Inc.
+ *           http://www.arcturusnetworks.com/products/ucp1020/
+ *           by Oleksandr G Zhadan et al.
+ *
+ * SPDX-License-Identifier: GPL-2.0+ BSD-3-Clause
+ *
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <malloc.h>
+#include <spi_flash.h>
+
+#include <asm/io.h>
+
+#ifndef CONFIG_SF_DEFAULT_SPEED
+#   define CONFIG_SF_DEFAULT_SPEED	1000000
+#endif
+#ifndef CONFIG_SF_DEFAULT_MODE
+#   define CONFIG_SF_DEFAULT_MODE	SPI_MODE0
+#endif
+#ifndef CONFIG_SF_DEFAULT_CS
+#   define CONFIG_SF_DEFAULT_CS		0
+#endif
+#ifndef CONFIG_SF_DEFAULT_BUS
+#   define CONFIG_SF_DEFAULT_BUS	0
+#endif
+
+#define MAX_SERIAL_SIZE 15
+#define MAX_HWADDR_SIZE 17
+
+#define FIRM_ADDR1 (0x200 - sizeof(smac))
+#define FIRM_ADDR2 (0x400 - sizeof(smac))
+#define FIRM_ADDR3 (CONFIG_ENV_SECT_SIZE + 0x200 - sizeof(smac))
+#define FIRM_ADDR4 (CONFIG_ENV_SECT_SIZE + 0x400 - sizeof(smac))
+
+static struct spi_flash *flash;
+char smac[4][18];
+
+static int ishwaddr(char *hwaddr)
+{
+	if (strlen(hwaddr) == MAX_HWADDR_SIZE)
+		if (hwaddr[2] == ':' &&
+		    hwaddr[5] == ':' &&
+		    hwaddr[8] == ':' &&
+		    hwaddr[11] == ':' &&
+		    hwaddr[14] == ':')
+			return 0;
+	return -1;
+}
+
+static int set_arc_product(int argc, char *const argv[])
+{
+	int err = 0;
+	char *mystrerr = "ERROR: Failed to save factory info in spi location";
+
+	if (argc != 5)
+		return -1;
+
+	/* Check serial number */
+	if (strlen(argv[1]) != MAX_SERIAL_SIZE)
+		return -1;
+
+	/* Check HWaddrs */
+	if (ishwaddr(argv[2]) || ishwaddr(argv[3]) || ishwaddr(argv[4]))
+		return -1;
+
+	strcpy(smac[3], argv[1]);
+	strcpy(smac[2], argv[2]);
+	strcpy(smac[1], argv[3]);
+	strcpy(smac[0], argv[4]);
+
+	flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+				CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+
+	/*
+	 * Save factory defaults
+	 */
+
+	if (spi_flash_write(flash, FIRM_ADDR1, sizeof(smac), smac)) {
+		printf("%s: %s [1]\n", __func__, mystrerr);
+		err++;
+	}
+	if (spi_flash_write(flash, FIRM_ADDR2, sizeof(smac), smac)) {
+		printf("%s: %s [2]\n", __func__, mystrerr);
+		err++;
+	}
+
+	if (spi_flash_write(flash, FIRM_ADDR3, sizeof(smac), smac)) {
+		printf("%s: %s [3]\n", __func__, mystrerr);
+		err++;
+	}
+
+	if (spi_flash_write(flash, FIRM_ADDR4, sizeof(smac), smac)) {
+		printf("%s: %s [4]\n", __func__, mystrerr);
+		err++;
+	}
+
+	if (err == 4) {
+		printf("%s: %s [ALL]\n", __func__, mystrerr);
+		return -2;
+	}
+
+	return 0;
+}
+
+int get_arc_info(void)
+{
+	int location = 1;
+	char *myerr = "ERROR: Failed to read all 4 factory info spi locations";
+
+	flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+				CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+
+	if (spi_flash_read(flash, FIRM_ADDR1, sizeof(smac), smac)) {
+		location++;
+		if (spi_flash_read(flash, FIRM_ADDR2, sizeof(smac), smac)) {
+			location++;
+			if (spi_flash_read(flash, FIRM_ADDR3, sizeof(smac),
+					   smac)) {
+				location++;
+				if (spi_flash_read(flash, FIRM_ADDR4,
+						   sizeof(smac), smac)) {
+					printf("%s: %s\n", __func__, myerr);
+					return -2;
+				}
+			}
+		}
+	}
+	if (smac[3][0] != 0) {
+		if (location > 1)
+			printf("Using region %d\n", location);
+		printf("SERIAL: ");
+		if (smac[3][0] == 0xFF) {
+			printf("\t<not found>\n");
+		} else {
+			printf("\t%s\n", smac[3]);
+			setenv("SERIAL", smac[3]);
+		}
+	}
+
+	if (strcmp(smac[2], "00:00:00:00:00:00") == 0)
+		return 0;
+
+	printf("HWADDR0:");
+	if (smac[2][0] == 0xFF) {
+		printf("\t<not found>\n");
+	} else {
+		char *ret = getenv("ethaddr");
+
+		if (strcmp(ret, __stringify(CONFIG_ETHADDR)) == 0) {
+			setenv("ethaddr", smac[2]);
+			printf("\t%s (factory)\n", smac[2]);
+		} else {
+			printf("\t%s\n", ret);
+		}
+	}
+
+	if (strcmp(smac[1], "00:00:00:00:00:00") == 0) {
+		setenv("eth1addr", smac[2]);
+		setenv("eth2addr", smac[2]);
+		return 0;
+	}
+
+	printf("HWADDR1:");
+	if (smac[1][0] == 0xFF) {
+		printf("\t<not found>\n");
+	} else {
+		char *ret = getenv("eth1addr");
+
+		if (strcmp(ret, __stringify(CONFIG_ETH1ADDR)) == 0) {
+			setenv("eth1addr", smac[1]);
+			printf("\t%s (factory)\n", smac[1]);
+		} else {
+			printf("\t%s\n", ret);
+		}
+	}
+
+	if (strcmp(smac[0], "00:00:00:00:00:00") == 0) {
+		setenv("eth2addr", smac[1]);
+		return 0;
+	}
+
+	printf("HWADDR2:");
+	if (smac[0][0] == 0xFF) {
+		printf("\t<not found>\n");
+	} else {
+		char *ret = getenv("eth2addr");
+
+		if (strcmp(ret, __stringify(CONFIG_ETH2ADDR)) == 0) {
+			setenv("eth2addr", smac[0]);
+			printf("\t%s (factory)\n", smac[0]);
+		} else {
+			printf("\t%s\n", ret);
+		}
+	}
+
+	return 0;
+}
+
+static int do_arc_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+	const char *cmd;
+	int ret = -1;
+
+	cmd = argv[1];
+	--argc;
+	++argv;
+
+	if (strcmp(cmd, "product") == 0) {
+		ret = set_arc_product(argc, argv);
+		goto done;
+	}
+	if (strcmp(cmd, "info") == 0) {
+		ret = get_arc_info();
+		goto done;
+	}
+done:
+	if (ret == -1)
+		return CMD_RET_USAGE;
+
+	return ret;
+}
+
+U_BOOT_CMD(arc, 6, 1, do_arc_cmd,
+	   "Arcturus product command sub-system",
+	   "product serial hwaddr0 hwaddr1 hwaddr2    - save Arcturus factory env\n"
+	   "info                                      - show Arcturus factory env\n\n");

board/Arcturus/ucp1020/ddr.c

@@ -0,0 +1,161 @@
+/*
+ * Copyright 2013-2015 Arcturus Networks, Inc.
+ *           http://www.arcturusnetworks.com/products/ucp1020/
+ * based on board/freescale/p1_p2_rdb_pc/spl.c
+ * original copyright follows:
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+#include <asm/immap_85xx.h>
+#include <asm/processor.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
+#include <asm/io.h>
+#include <asm/fsl_law.h>
+
+#ifdef CONFIG_SYS_DDR_RAW_TIMING
+#if defined(CONFIG_UCP1020) || defined(CONFIG_UCP1020T1)
+/*
+ * Micron MT41J128M16HA-15E
+ * */
+dimm_params_t ddr_raw_timing = {
+	.n_ranks = 1,
+	.rank_density = 536870912u,
+	.capacity = 536870912u,
+	.primary_sdram_width = 32,
+	.ec_sdram_width = 8,
+	.registered_dimm = 0,
+	.mirrored_dimm = 0,
+	.n_row_addr = 14,
+	.n_col_addr = 10,
+	.n_banks_per_sdram_device = 8,
+	.edc_config = 2,
+	.burst_lengths_bitmask = 0x0c,
+
+	.tckmin_x_ps = 1650,
+	.caslat_x = 0x7e << 4,	/* 5,6,7,8,9,10 */
+	.taa_ps = 14050,
+	.twr_ps = 15000,
+	.trcd_ps = 13500,
+	.trrd_ps = 75000,
+	.trp_ps = 13500,
+	.tras_ps = 40000,
+	.trc_ps = 49500,
+	.trfc_ps = 160000,
+	.twtr_ps = 75000,
+	.trtp_ps = 75000,
+	.refresh_rate_ps = 7800000,
+	.tfaw_ps = 30000,
+};
+
+#else
+#error Missing raw timing data for this board
+#endif
+
+int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
+			    unsigned int controller_number,
+			    unsigned int dimm_number)
+{
+	const char dimm_model[] = "Fixed DDR on board";
+
+	if ((controller_number == 0) && (dimm_number == 0)) {
+		memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
+		memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
+		memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
+	}
+
+	return 0;
+}
+#endif /* CONFIG_SYS_DDR_RAW_TIMING */
+
+#ifdef CONFIG_SYS_DDR_CS0_BNDS
+/* Fixed sdram init -- doesn't use serial presence detect. */
+phys_size_t fixed_sdram(void)
+{
+	sys_info_t sysinfo;
+	char buf[32];
+	size_t ddr_size;
+	fsl_ddr_cfg_regs_t ddr_cfg_regs = {
+		.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
+		.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
+		.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
+#if CONFIG_CHIP_SELECTS_PER_CTRL > 1
+		.cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
+		.cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
+		.cs[1].config_2 = CONFIG_SYS_DDR_CS1_CONFIG_2,
+#endif
+		.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3,
+		.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0,
+		.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1,
+		.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2,
+		.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
+		.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
+		.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1,
+		.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2,
+		.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
+		.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL,
+		.ddr_data_init = CONFIG_SYS_DDR_DATA_INIT,
+		.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL,
+		.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
+		.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
+		.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
+		.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
+		.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
+		.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL,
+		.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
+		.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
+		.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
+	};
+
+	get_sys_info(&sysinfo);
+	printf("Configuring DDR for %s MT/s data rate\n",
+	       strmhz(buf, sysinfo.freq_ddrbus));
+
+	ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+
+	fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0);
+
+	if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
+			 ddr_size, LAW_TRGT_IF_DDR_1) < 0) {
+		printf("ERROR setting Local Access Windows for DDR\n");
+		return 0;
+	};
+
+	return ddr_size;
+}
+#endif
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+			   dimm_params_t *pdimm,
+			   unsigned int ctrl_num)
+{
+	int i;
+
+	popts->clk_adjust = 6;
+	popts->cpo_override = 0x1f;
+	popts->write_data_delay = 2;
+	popts->half_strength_driver_enable = 1;
+	/* Write leveling override */
+	popts->wrlvl_en = 1;
+	popts->wrlvl_override = 1;
+	popts->wrlvl_sample = 0xf;
+	popts->wrlvl_start = 0x8;
+	popts->trwt_override = 1;
+	popts->trwt = 0;
+
+	if (pdimm->primary_sdram_width == 64)
+		popts->data_bus_width = 0;
+	else if (pdimm->primary_sdram_width == 32)
+		popts->data_bus_width = 1;
+	else
+		printf("Error in DDR bus width configuration!\n");
+
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
+		popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
+	}
+}

board/Arcturus/ucp1020/law.c

@@ -0,0 +1,25 @@
+/*
+ * Copyright 2013-2015 Arcturus Networks, Inc.
+ *           http://www.arcturusnetworks.com/products/ucp1020/
+ * based on board/freescale/p1_p2_rdb_pc/spl.c
+ * original copyright follows:
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+#ifdef CONFIG_VSC7385_ENET
+	SET_LAW(CONFIG_SYS_VSC7385_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
+#endif
+	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_LBC),
+#ifdef CONFIG_SYS_NAND_BASE_PHYS
+	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_32K, LAW_TRGT_IF_LBC),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);

board/Arcturus/ucp1020/spl.c

@@ -0,0 +1,126 @@
+/*
+ * Copyright 2013-2015 Arcturus Networks, Inc.
+ *           http://www.arcturusnetworks.com/products/ucp1020/
+ * based on board/freescale/p1_p2_rdb_pc/spl.c
+ * original copyright follows:
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <ns16550.h>
+#include <malloc.h>
+#include <mmc.h>
+#include <nand.h>
+#include <i2c.h>
+#include <fsl_esdhc.h>
+#include <spi_flash.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const u32 sysclk_tbl[] = {
+	66666000, 7499900, 83332500, 8999900,
+	99999000, 11111000, 12499800, 13333200
+};
+
+phys_size_t get_effective_memsize(void)
+{
+	return CONFIG_SYS_L2_SIZE;
+}
+
+void board_init_f(ulong bootflag)
+{
+	u32 plat_ratio, bus_clk;
+	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+
+	console_init_f();
+
+	/* Set pmuxcr to allow both i2c1 and i2c2 */
+	setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000);
+	setbits_be32(&gur->pmuxcr,
+		     in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA);
+
+	/* Read back the register to synchronize the write. */
+	in_be32(&gur->pmuxcr);
+
+#ifdef CONFIG_SPL_SPI_BOOT
+	clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA);
+#endif
+
+	/* initialize selected port with appropriate baud rate */
+	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
+	plat_ratio >>= 1;
+	bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
+	gd->bus_clk = bus_clk;
+
+	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
+		     bus_clk / 16 / CONFIG_BAUDRATE);
+#ifdef CONFIG_SPL_MMC_BOOT
+	puts("\nSD boot...\n");
+#elif defined(CONFIG_SPL_SPI_BOOT)
+	puts("\nSPI Flash boot...\n");
+#endif
+
+	/* copy code to RAM and jump to it - this should not return */
+	/* NOTE - code has to be copied out of NAND buffer before
+	 * other blocks can be read.
+	 */
+	relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+	/* Pointer is writable since we allocated a register for it */
+	gd = (gd_t *)CONFIG_SPL_GD_ADDR;
+	bd_t *bd;
+
+	memset(gd, 0, sizeof(gd_t));
+	bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t));
+	memset(bd, 0, sizeof(bd_t));
+	gd->bd = bd;
+	bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR;
+	bd->bi_memsize = CONFIG_SYS_L2_SIZE;
+
+	probecpu();
+	get_clocks();
+	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
+			CONFIG_SPL_RELOC_MALLOC_SIZE);
+
+#ifndef CONFIG_SPL_NAND_BOOT
+	env_init();
+#endif
+#ifdef CONFIG_SPL_MMC_BOOT
+	mmc_initialize(bd);
+#endif
+	/* relocate environment function pointers etc. */
+#ifdef CONFIG_SPL_NAND_BOOT
+	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
+			    (uchar *)CONFIG_ENV_ADDR);
+	gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
+	gd->env_valid = 1;
+#else
+	env_relocate();
+#endif
+
+#ifdef CONFIG_SYS_I2C
+	i2c_init_all();
+#else
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
+
+	gd->ram_size = initdram(0);
+#ifdef CONFIG_SPL_NAND_BOOT
+	puts("Tertiary program loader running in sram...");
+#else
+	puts("Second program loader running in sram...\n");
+#endif
+
+#ifdef CONFIG_SPL_MMC_BOOT
+	mmc_boot();
+#elif defined(CONFIG_SPL_SPI_BOOT)
+	spi_boot();
+#elif defined(CONFIG_SPL_NAND_BOOT)
+	nand_boot();
+#endif
+}

board/Arcturus/ucp1020/spl_minimal.c

@@ -0,0 +1,67 @@
+/*
+ * Copyright 2013-2015 Arcturus Networks, Inc.
+ *           http://www.arcturusnetworks.com/products/ucp1020/
+ * based on board/freescale/p1_p2_rdb_pc/spl_minimal.c
+ * original copyright follows:
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <ns16550.h>
+#include <asm/io.h>
+#include <nand.h>
+#include <linux/compiler.h>
+#include <asm/fsl_law.h>
+#include <fsl_ddr_sdram.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_init_f(ulong bootflag)
+{
+	u32 plat_ratio;
+	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+
+#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM)
+	set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM);
+	set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM);
+#endif
+
+	/* initialize selected port with appropriate baud rate */
+	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
+	plat_ratio >>= 1;
+	gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
+
+	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
+		     gd->bus_clk / 16 / CONFIG_BAUDRATE);
+
+	puts("\nNAND boot... ");
+
+	/* copy code to RAM and jump to it - this should not return */
+	/* NOTE - code has to be copied out of NAND buffer before
+	 * other blocks can be read.
+	 */
+	relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+	puts("\nSecond program loader running in sram...");
+	nand_boot();
+}
+
+void putc(char c)
+{
+	if (c == '\n')
+		NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
+
+	NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
+}
+
+void puts(const char *str)
+{
+	while (*str)
+		putc(*str++);
+}

board/Arcturus/ucp1020/tlb.c

@@ -0,0 +1,101 @@
+/*
+ * Copyright 2013-2015 Arcturus Networks, Inc
+ *           http://www.arcturusnetworks.com/products/ucp1020/
+ * based on board/freescale/p1_p2_rdb_pc/tlb.c
+ * original copyright follows:
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+	/* TLB 0 - for temp stack in cache */
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS,
+		      MAS3_SX | MAS3_SW | MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
+		      MAS3_SX | MAS3_SW | MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
+		      MAS3_SX | MAS3_SW | MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
+		      MAS3_SX | MAS3_SW | MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+
+	/* TLB 1 */
+	/* *I*** - Covers boot page */
+	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
+		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I,
+		      0, 0, BOOKE_PAGESZ_4K, 1),
+
+	/* *I*G* - CCSRBAR */
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		      0, 1, BOOKE_PAGESZ_1M, 1),
+
+#ifndef CONFIG_SPL_BUILD
+	/* W**G* - Flash/promjet, localbus */
+	/* This will be changed to *I*G* after relocation to RAM. */
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+		      MAS3_SX | MAS3_SR, MAS2_W | MAS2_G,
+		      0, 2, BOOKE_PAGESZ_64M, 1),
+
+#ifdef CONFIG_PCI
+	/* *I*G* - PCI memory 1.5G */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
+		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		      0, 3, BOOKE_PAGESZ_1G, 1),
+
+	/* *I*G* - PCI I/O effective: 192K  */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
+		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		      0, 4, BOOKE_PAGESZ_256K, 1),
+#endif
+
+#ifdef CONFIG_VSC7385_ENET
+	/* *I*G - VSC7385 Switch */
+	SET_TLB_ENTRY(1, CONFIG_SYS_VSC7385_BASE, CONFIG_SYS_VSC7385_BASE_PHYS,
+		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		      0, 5, BOOKE_PAGESZ_1M, 1),
+#endif
+#endif /* not SPL */
+
+#ifdef CONFIG_SYS_NAND_BASE
+	/* *I*G - NAND */
+	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		      0, 7, BOOKE_PAGESZ_1M, 1),
+#endif
+
+#if defined(CONFIG_SYS_RAMBOOT) || \
+	(defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR))
+	/* *I*G - eSDHC/eSPI/NAND boot */
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
+		      MAS3_SX | MAS3_SW | MAS3_SR, 0,
+		      0, 8, BOOKE_PAGESZ_1G, 1),
+
+#endif /* RAMBOOT/SPL */
+
+#ifdef CONFIG_SYS_INIT_L2_ADDR
+	/* *I*G - L2SRAM */
+	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
+		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_G,
+		      0, 11, BOOKE_PAGESZ_256K, 1),
+#if CONFIG_SYS_L2_SIZE >= (256 << 10)
+	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000,
+		      CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000,
+		      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
+		      0, 12, BOOKE_PAGESZ_256K, 1)
+#endif
+#endif
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);

board/Arcturus/ucp1020/ucp1020.c

@@ -0,0 +1,363 @@
+/*
+ * Copyright 2013-2015 Arcturus Networks, Inc.
+ *           http://www.arcturusnetworks.com/products/ucp1020/
+ *           by Oleksandr G Zhadan et al.
+ * based on board/freescale/p1_p2_rdb_pc/spl.c
+ * original copyright follows:
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <hwconfig.h>
+#include <pci.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <fsl_mdio.h>
+#include <tsec.h>
+#include <ioports.h>
+#include <netdev.h>
+#include <micrel.h>
+#include <spi_flash.h>
+#include <mmc.h>
+#include <linux/ctype.h>
+#include <asm/fsl_serdes.h>
+#include <asm/gpio.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_pci.h>
+#include <fsl_ddr_sdram.h>
+#include <asm/io.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_lbc.h>
+#include <asm/mp.h>
+#include "ucp1020.h"
+
+void spi_set_speed(struct spi_slave *slave, uint hz)
+{
+	/* TO DO: It's actially have to be in spi/ */
+}
+
+/*
+ * To be compatible with cmd_gpio
+ */
+int name_to_gpio(const char *name)
+{
+	int gpio = 31 - simple_strtoul(name, NULL, 10);
+
+	if (gpio < 16)
+		gpio = -1;
+
+	return gpio;
+}
+
+void board_gpio_init(void)
+{
+	int i;
+	char envname[8], *val;
+
+	for (i = 0; i < GPIO_MAX_NUM; i++) {
+		sprintf(envname, "GPIO%d", i);
+		val = getenv(envname);
+		if (val) {
+			char direction = toupper(val[0]);
+			char level = toupper(val[1]);
+
+			if (direction == 'I') {
+				gpio_direction_input(i);
+			} else {
+				if (direction == 'O') {
+					if (level == '1')
+						gpio_direction_output(i, 1);
+					else
+						gpio_direction_output(i, 0);
+				}
+			}
+		}
+	}
+
+	val = getenv("PCIE_OFF");
+	if (val) {
+		gpio_direction_input(GPIO_PCIE1_EN);
+		gpio_direction_input(GPIO_PCIE2_EN);
+	} else {
+		gpio_direction_output(GPIO_PCIE1_EN, 1);
+		gpio_direction_output(GPIO_PCIE2_EN, 1);
+	}
+
+	val = getenv("SDHC_CDWP_OFF");
+	if (!val) {
+		ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+		setbits_be32(&gur->pmuxcr,
+			     (MPC85xx_PMUXCR_SDHC_CD | MPC85xx_PMUXCR_SDHC_WP));
+	}
+}
+
+int board_early_init_f(void)
+{
+	return 0;	/* Just in case. Could be disable in config file */
+}
+
+int checkboard(void)
+{
+	printf("Board: %s\n", CONFIG_BOARDNAME_LOCAL);
+	board_gpio_init();
+	printf("SD/MMC: 4-bit Mode\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_PCI
+void pci_init_board(void)
+{
+	fsl_pcie_init_board(0);
+}
+#endif
+
+int board_early_init_r(void)
+{
+	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+	/*
+	 * Remap Boot flash region to caching-inhibited
+	 * so that flash can be erased properly.
+	 */
+
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+
+	/* invalidate existing TLB entry for flash */
+	disable_tlb(flash_esel);
+
+	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */
+		MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, /* perms, wimge */
+		0, flash_esel, BOOKE_PAGESZ_64M, 1);/* ts, esel, tsize, iprot */
+
+	return 0;
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+#if defined(CONFIG_PHY_MICREL_KSZ9021)
+	int regval;
+	static int cnt;
+
+	if (cnt++ == 0)
+		printf("PHYs address [");
+
+	if (phydev->addr == TSEC1_PHY_ADDR || phydev->addr == TSEC3_PHY_ADDR) {
+		regval =
+		    ksz9021_phy_extended_read(phydev,
+					      MII_KSZ9021_EXT_STRAP_STATUS);
+		/*
+		 * min rx data delay
+		 */
+		ksz9021_phy_extended_write(phydev,
+					   MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW,
+					   0x6666);
+		/*
+		 * max rx/tx clock delay, min rx/tx control
+		 */
+		ksz9021_phy_extended_write(phydev,
+					   MII_KSZ9021_EXT_RGMII_CLOCK_SKEW,
+					   0xf6f6);
+		printf("0x%x", (regval & 0x1f));
+	} else {
+		printf("0x%x", (TSEC2_PHY_ADDR & 0x1f));
+	}
+	if (cnt == 3)
+		printf("] ");
+	else
+		printf(",");
+#endif
+
+#if defined(CONFIG_PHY_MICREL_KSZ9031_DEBUG)
+	regval = ksz9031_phy_extended_read(phydev, 2, 0x01, 0x4000);
+	if (regval >= 0)
+		printf(" (ADDR 0x%x) ", regval & 0x1f);
+#endif
+
+	return 0;
+}
+
+int last_stage_init(void)
+{
+	static char newkernelargs[256];
+	static u8 id1[16];
+	static u8 id2;
+	struct mmc *mmc;
+	char *sval, *kval;
+
+	if (i2c_read(CONFIG_SYS_I2C_IDT6V49205B, 7, 1, &id1[0], 2) < 0) {
+		printf("Error reading i2c IDT6V49205B information!\n");
+	} else {
+		printf("IDT6V49205B(0x%02x): ready\n", id1[1]);
+		i2c_read(CONFIG_SYS_I2C_IDT6V49205B, 4, 1, &id1[0], 2);
+		if (!(id1[1] & 0x02)) {
+			id1[1] |= 0x02;
+			i2c_write(CONFIG_SYS_I2C_IDT6V49205B, 4, 1, &id1[0], 2);
+			asm("nop; nop");
+		}
+	}
+
+	if (i2c_read(CONFIG_SYS_I2C_NCT72_ADDR, 0xFE, 1, &id2, 1) < 0)
+		printf("Error reading i2c NCT72 information!\n");
+	else
+		printf("NCT72(0x%x): ready\n", id2);
+
+	kval = getenv("kernelargs");
+
+	mmc = find_mmc_device(0);
+	if (mmc)
+		if (!mmc_init(mmc)) {
+			printf("MMC/SD card detected\n");
+			if (kval) {
+				int n = strlen(defkargs);
+				char *tmp = strstr(kval, defkargs);
+
+				*tmp = 0;
+				strcpy(newkernelargs, kval);
+				strcat(newkernelargs, " ");
+				strcat(newkernelargs, mmckargs);
+				strcat(newkernelargs, " ");
+				strcat(newkernelargs, &tmp[n]);
+				setenv("kernelargs", newkernelargs);
+			} else {
+				setenv("kernelargs", mmckargs);
+			}
+		}
+	get_arc_info();
+
+	if (kval) {
+		sval = getenv("SERIAL");
+		if (sval) {
+			strcpy(newkernelargs, "SN=");
+			strcat(newkernelargs, sval);
+			strcat(newkernelargs, " ");
+			strcat(newkernelargs, kval);
+			setenv("kernelargs", newkernelargs);
+		}
+	} else {
+		printf("Error reading kernelargs env variable!\n");
+	}
+
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	struct fsl_pq_mdio_info mdio_info;
+	struct tsec_info_struct tsec_info[4];
+#ifdef CONFIG_TSEC2
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#endif
+	int num = 0;
+
+#ifdef CONFIG_TSEC1
+	SET_STD_TSEC_INFO(tsec_info[num], 1);
+	num++;
+#endif
+#ifdef CONFIG_TSEC2
+	SET_STD_TSEC_INFO(tsec_info[num], 2);
+	if (is_serdes_configured(SGMII_TSEC2)) {
+		if (!(in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_SGMII2_DIS)) {
+			puts("eTSEC2 is in sgmii mode.\n");
+			tsec_info[num].flags |= TSEC_SGMII;
+			tsec_info[num].phyaddr = TSEC2_PHY_ADDR_SGMII;
+		}
+	}
+	num++;
+#endif
+#ifdef CONFIG_TSEC3
+	SET_STD_TSEC_INFO(tsec_info[num], 3);
+	num++;
+#endif
+
+	if (!num) {
+		printf("No TSECs initialized\n");
+		return 0;
+	}
+
+	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+	mdio_info.name = DEFAULT_MII_NAME;
+
+	fsl_pq_mdio_init(bis, &mdio_info);
+
+	tsec_eth_init(bis, tsec_info, num);
+
+	return pci_eth_init(bis);
+}
+
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
+{
+	phys_addr_t base;
+	phys_size_t size;
+	const char *soc_usb_compat = "fsl-usb2-dr";
+	int err, usb1_off, usb2_off;
+
+	ft_cpu_setup(blob, bd);
+
+	base = getenv_bootm_low();
+	size = getenv_bootm_size();
+
+	fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+	FT_FSL_PCI_SETUP;
+
+#if defined(CONFIG_HAS_FSL_DR_USB)
+	fdt_fixup_dr_usb(blob, bd);
+#endif
+
+#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
+	/* Delete eLBC node as it is muxed with USB2 controller */
+	if (hwconfig("usb2")) {
+		const char *soc_elbc_compat = "fsl,p1020-elbc";
+		int off = fdt_node_offset_by_compatible(blob, -1,
+							soc_elbc_compat);
+		if (off < 0) {
+			printf
+			    ("WARNING: could not find compatible node %s: %s\n",
+			     soc_elbc_compat, fdt_strerror(off));
+			return off;
+		}
+		err = fdt_del_node(blob, off);
+		if (err < 0) {
+			printf("WARNING: could not remove %s: %s\n",
+			       soc_elbc_compat, fdt_strerror(err));
+		}
+		return err;
+	}
+#endif
+
+/* Delete USB2 node as it is muxed with eLBC */
+	usb1_off = fdt_node_offset_by_compatible(blob, -1, soc_usb_compat);
+	if (usb1_off < 0) {
+		printf("WARNING: could not find compatible node %s: %s.\n",
+		       soc_usb_compat, fdt_strerror(usb1_off));
+		return usb1_off;
+	}
+	usb2_off =
+	    fdt_node_offset_by_compatible(blob, usb1_off, soc_usb_compat);
+	if (usb2_off < 0) {
+		printf("WARNING: could not find compatible node %s: %s.\n",
+		       soc_usb_compat, fdt_strerror(usb2_off));
+		return usb2_off;
+	}
+	err = fdt_del_node(blob, usb2_off);
+	if (err < 0) {
+		printf("WARNING: could not remove %s: %s.\n",
+		       soc_usb_compat, fdt_strerror(err));
+	}
+	return 0;
+}
+#endif

board/Arcturus/ucp1020/ucp1020.h

@@ -0,0 +1,44 @@
+/*
+ * Copyright 2013-2015 Arcturus Networks, Inc.
+ *           http://www.arcturusnetworks.com/products/ucp1020/
+ *           by Oleksandr G Zhadan et al.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __UCP1020_H__
+#define __UCP1020_H__
+
+#define GPIO0		31
+#define GPIO1		30
+#define GPIO2		29
+#define GPIO3		28
+#define GPIO4		27
+#define GPIO5		26
+#define GPIO6		25
+#define GPIO7		24
+#define GPIO8		23
+#define GPIO9		22
+#define GPIO10		21
+#define GPIO11		20
+#define GPIO12		19
+#define GPIO13		18
+#define GPIO14		17
+#define GPIO15		16
+#define GPIO_MAX_NUM	16
+
+#define GPIO_SDHC_CD	GPIO8
+#define GPIO_SDHC_WP	GPIO9
+#define GPIO_USB_PCTL0	GPIO10
+#define GPIO_PCIE1_EN	GPIO11
+#define GPIO_PCIE2_EN	GPIO10
+#define GPIO_USB_PCTL1	GPIO11
+
+#define GPIO_WD		GPIO15
+
+static char *defkargs = "root=/dev/mtdblock1 rootfstype=cramfs ro";
+static char *mmckargs = "root=/dev/mmcblk0p1 rootwait rw";
+
+int get_arc_info(void);
+
+#endif

configs/UCP1020_SPIFLASH_defconfig

@@ -0,0 +1,6 @@
+CONFIG_PPC=y
+CONFIG_MPC85xx=y
+CONFIG_TARGET_UCP1020=y
+CONFIG_TARGET_UCP1020_SPIFLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_UCP1020=y

configs/UCP1020_defconfig

@@ -0,0 +1,5 @@
+CONFIG_PPC=y
+CONFIG_MPC85xx=y
+CONFIG_TARGET_UCP1020=y
+CONFIG_SPI_FLASH=y
+CONFIG_UCP1020=y