mirror of
https://github.com/Fishwaldo/u-boot.git
synced 2025-03-18 13:11:31 +00:00
x86: edison: Add documentation for using am xFSTK image
Add a description of how to flash Edison using the xFSTK tool. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This commit is contained in:
parent
2e3b883014
commit
8c180d669a
1 changed files with 120 additions and 0 deletions
|
@ -39,3 +39,123 @@ use.
|
|||
reset the board::
|
||||
|
||||
=> reset
|
||||
|
||||
|
||||
Updating U-Boot using xFSTK
|
||||
---------------------------
|
||||
|
||||
You can also update U-Boot using the xfstk-dldr-solo tool if you can build it.
|
||||
One way to do that is to follow the `xFSTK`_ instructions. You may need to use
|
||||
a virtual machine running Ubuntu Trusty. Once you have built it and installed
|
||||
libboost-all-dev, you can copy xfstk-dldr-solo to /usr/local/bin and
|
||||
libboost_program_options.so.1.54.0 to /usr/lib/i386-linux-gnu/ and with luck
|
||||
it will work. You might fine this `drive`_ helpful.
|
||||
|
||||
If it does, then you can download and unpack the Edison reocovery image,
|
||||
install dfu-util, reset your board and flash U-Boot like this::
|
||||
|
||||
$ xfstk-dldr-solo --gpflags 0x80000007 \
|
||||
--osimage u-boot-edison.img \
|
||||
--fwdnx recover/edison_dnx_fwr.bin \
|
||||
--fwimage recover/edison_ifwi-dbg-00.bin \
|
||||
--osdnx recover/edison_dnx_osr.bin
|
||||
|
||||
This should show the following
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
XFSTK Downloader Solo 0.0.0
|
||||
Copyright (c) 2015 Intel Corporation
|
||||
Build date and time: Aug 15 2020 15:07:13
|
||||
|
||||
.Intel SoC Device Detection Found
|
||||
Parsing Commandline....
|
||||
Registering Status Callback....
|
||||
.Initiating Download Process....
|
||||
.......(lots of dots)........XFSTK-STATUS--Reconnecting to device - Attempt #1
|
||||
.......(even more dots)......................
|
||||
|
||||
|
||||
You have about 10 seconds after resetting the board to type the above command.
|
||||
If you want to check if the board is ready, type:
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
lsusb |egrep "8087|8086"
|
||||
Bus 001 Device 004: ID 8086:e005 Intel Corp.
|
||||
|
||||
If you see a device with the same ID as above, the board is waiting for your
|
||||
command.
|
||||
|
||||
After about 5 seconds you should see some console output from the board:
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
******************************
|
||||
PSH KERNEL VERSION: b0182b2b
|
||||
WR: 20104000
|
||||
******************************
|
||||
|
||||
SCU IPC: 0x800000d0 0xfffce92c
|
||||
|
||||
PSH miaHOB version: TNG.B0.VVBD.0000000c
|
||||
|
||||
microkernel built 11:24:08 Feb 5 2015
|
||||
|
||||
******* PSH loader *******
|
||||
PCM page cache size = 192 KB
|
||||
Cache Constraint = 0 Pages
|
||||
Arming IPC driver ..
|
||||
Adding page store pool ..
|
||||
PagestoreAddr(IMR Start Address) = 0x04899000
|
||||
pageStoreSize(IMR Size) = 0x00080000
|
||||
|
||||
*** Ready to receive application ***
|
||||
|
||||
After another 10 seconds the xFSTK tool completes and the board resets. About
|
||||
10 seconds after that should see the above message again and then within a
|
||||
few seconds U-Boot should start on your board:
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
U-Boot 2020.10-rc3 (Sep 03 2020 - 18:44:28 -0600)
|
||||
|
||||
CPU: Genuine Intel(R) CPU 4000 @ 500MHz
|
||||
DRAM: 980.6 MiB
|
||||
WDT: Started with servicing (60s timeout)
|
||||
MMC: mmc@ff3fc000: 0, mmc@ff3fa000: 1
|
||||
Loading Environment from MMC... OK
|
||||
In: serial
|
||||
Out: serial
|
||||
Err: serial
|
||||
Saving Environment to MMC... Writing to redundant MMC(0)... OK
|
||||
Saving Environment to MMC... Writing to MMC(0)... OK
|
||||
Net: No ethernet found.
|
||||
Hit any key to stop autoboot: 0
|
||||
Target:blank
|
||||
Partitioning using GPT
|
||||
Writing GPT: success!
|
||||
Saving Environment to MMC... Writing to redundant MMC(0)... OK
|
||||
Flashing already done...
|
||||
5442816 bytes read in 238 ms (21.8 MiB/s)
|
||||
Valid Boot Flag
|
||||
Setup Size = 0x00003c00
|
||||
Magic signature found
|
||||
Using boot protocol version 2.0c
|
||||
Linux kernel version 3.10.17-poky-edison+ (ferry@kalamata) #1 SMP PREEMPT Mon Jan 11 14:54:18 CET 2016
|
||||
Building boot_params at 0x00090000
|
||||
Loading bzImage at address 100000 (5427456 bytes)
|
||||
Magic signature found
|
||||
Kernel command line: "rootwait root=PARTUUID=ada722ed-6410-764e-8619-abff6f66e10e rootfstype=ext4 console=ttyMFD2 earlyprintk=ttyMFD2,keep loglevel=4 g_multi.ethernet_config=cdc systemd.unit=multi-user.target hardware_id=00 g_multi.iSerialNumber=2249baf774c675598661a63098c0ad41 g_multi.dev_addr=02:00:86:c0:ad:41 platform_mrfld_audio.audio_codec=dummy"
|
||||
Magic signature found
|
||||
|
||||
Starting kernel ...
|
||||
|
||||
...
|
||||
|
||||
Poky (Yocto Project Reference Distro) 1.7.2 edison ttyMFD2
|
||||
|
||||
edison login:
|
||||
|
||||
.. _xFSTK: https://community.intel.com/t5/Intel-Makers/Building-xFSTK-on-Ubuntu-14-04-32-bit-for-flashing-Edison/td-p/538081
|
||||
.. _drive: https://drive.google.com/drive/u/0/folders/1URPHrOk9-UBsh8hjv-7WwC0W6Fy61uAJ
|
||||
|
|
Loading…
Add table
Reference in a new issue