GitHub-Mirror/u-boot
2
0
Fork 0
mirror of https://github.com/Fishwaldo/u-boot.git synced 2025-03-18 05:01:30 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

net: e1000: implement eth_write_hwaddr

Browse source 
Implement programming MAC address to the hardware, i.e. external flash
seen as EEPROM.

MAC address is only written if it differs from what is already stored in
flash or if reading the current MAC address fails.

Signed-off-by: Hannu Lounento <hannu.lounento@ge.com>
CC: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
This commit is contained in:
Hannu Lounento 2018-01-10 20:31:26 +01:00 • committed by Stefano Babic
parent e0a75fed9e
commit 8d9bde0dbb
1 changed files with 40 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

40
drivers/net/e1000.c
View file

@ -5649,6 +5649,45 @@ e1000_poll(struct eth_device *nic)
return len ? 1 : 0;
}
static int e1000_write_hwaddr(struct eth_device *dev)
{
#ifndef CONFIG_E1000_NO_NVM
unsigned char *mac = dev->enetaddr;
unsigned char current_mac[6];
struct e1000_hw *hw = dev->priv;
uint16_t data[3];
int ret_val, i;
DEBUGOUT("%s: mac=%pM\n", __func__, mac);
memset(current_mac, 0, 6);
/* Read from EEPROM, not from registers, to make sure
* the address is persistently configured
*/
ret_val = e1000_read_mac_addr_from_eeprom(hw, current_mac);
DEBUGOUT("%s: current mac=%pM\n", __func__, current_mac);
/* Only write to EEPROM if the given address is different or
* reading the current address failed
*/
if (!ret_val && memcmp(current_mac, mac, 6) == 0)
return 0;
for (i = 0; i < 3; ++i)
data[i] = mac[i * 2 + 1] << 8 | mac[i * 2];
ret_val = e1000_write_eeprom_srwr(hw, 0x0, 3, data);
if (!ret_val)
ret_val = e1000_update_eeprom_checksum_i210(hw);
return ret_val;
#else
return 0;
#endif
}
/**************************************************************************
PROBE - Look for an adapter, this routine's visible to the outside
You should omit the last argument struct pci_device * for a non-PCI NIC
@ -5698,6 +5737,7 @@ e1000_initialize(bd_t * bis)
nic->recv = e1000_poll;
nic->send = e1000_transmit;
nic->halt = e1000_disable;
nic->write_hwaddr = e1000_write_hwaddr;
eth_register(nic);
}