Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

board/freescale/mpc8569mds/bcsr.h

@@ -33,7 +33,8 @@
 #define BCSR6_UPC1_POS_EN	0x40
 #define BCSR6_UPC1_ADDR_EN	0x20
 #define BCSR6_UPC1_DEV2		0x10
-#define BCSR6_SD_ENABLE         0x04
+#define BCSR6_SD_CARD_1BIT	0x08
+#define BCSR6_SD_CARD_4BITS	0x04
 #define BCSR6_TDM2G_EN		0x02
 #define BCSR6_UCC7_RMII_EN	0x01
 
@@ -67,9 +68,14 @@
 
 #define BCSR15_SMII6_DIS	0x08
 #define BCSR15_SMII8_DIS	0x04
+#define BCSR15_QEUART_EN	0x01
 
 #define BCSR16_UPC1_DEV2	0x02
 
+#define BCSR17_nUSBEN		0x80
+#define BCSR17_nUSBLOWSPD	0x40
+#define BCSR17_USBVCC		0x20
+#define BCSR17_USBMODE		0x10
 #define BCSR17_FLASH_nWP	0x01
 
 /*BCSR Utils functions*/

board/freescale/mpc8569mds/law.c

@@ -54,6 +54,7 @@ struct law_entry law_table[] = {
 	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1),
 	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1),
 	SET_LAW(CONFIG_SYS_BCSR_BASE_PHYS, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_SRIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);

board/freescale/mpc8569mds/mpc8569mds.c

@@ -23,6 +23,7 @@
  */
 
 #include <common.h>
+#include <hwconfig.h>
 #include <pci.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
@@ -35,6 +36,7 @@
 #include <ioports.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <fsl_esdhc.h>
 
 #include "bcsr.h"
 
@@ -152,6 +154,27 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
 	{5, 10, 2, 0, 3}, /* UART1_CTS_B */
 	{5, 11, 1, 0, 2}, /* UART1_RTS_B */
 
+	/* QE UART                                     */
+	{0, 19, 1, 0, 2}, /* QEUART_TX                 */
+	{1, 17, 2, 0, 3}, /* QEUART_RX                 */
+	{0, 25, 1, 0, 1}, /* QEUART_RTS                */
+	{1, 23, 2, 0, 1}, /* QEUART_CTS                */
+
+	/* QE USB                                      */
+	{5,  3, 1, 0, 1}, /* USB_OE                    */
+	{5,  4, 1, 0, 2}, /* USB_TP                    */
+	{5,  5, 1, 0, 2}, /* USB_TN                    */
+	{5,  6, 2, 0, 2}, /* USB_RP                    */
+	{5,  7, 2, 0, 1}, /* USB_RX                    */
+	{5,  8, 2, 0, 1}, /* USB_RN                    */
+	{2,  4, 2, 0, 2}, /* CLK5                      */
+
+	/* SPI Flash, M25P40                           */
+	{4, 27, 3, 0, 1}, /* SPI_MOSI                  */
+	{4, 28, 3, 0, 1}, /* SPI_MISO                  */
+	{4, 29, 3, 0, 1}, /* SPI_CLK                   */
+	{4, 30, 1, 0, 0}, /* SPI_SEL, GPIO             */
+
 	{0,  0, 0, 0, QE_IOP_TAB_END} /* END of table */
 };
 
@@ -303,6 +326,190 @@ local_bus_init(void)
 	out_be32(&lbc->lcrr, (u32)in_be32(&lbc->lcrr)| 0x00030000);
 }
 
+static void fdt_board_disable_serial(void *blob, bd_t *bd, const char *alias)
+{
+	const char *status = "disabled";
+	int off;
+	int err;
+
+	off = fdt_path_offset(blob, alias);
+	if (off < 0) {
+		printf("WARNING: could not find %s alias: %s.\n", alias,
+			fdt_strerror(off));
+		return;
+	}
+
+	err = fdt_setprop(blob, off, "status", status, strlen(status) + 1);
+	if (err) {
+		printf("WARNING: could not set status for serial0: %s.\n",
+			fdt_strerror(err));
+		return;
+	}
+}
+
+/*
+ * Because of an erratum in prototype boards it is impossible to use eSDHC
+ * without disabling UART0 (which makes it quite easy to 'brick' the board
+ * by simply issung 'setenv hwconfig esdhc', and not able to interact with
+ * U-Boot anylonger).
+ *
+ * So, but default we assume that the board is a prototype, which is a most
+ * safe assumption. There is no way to determine board revision from a
+ * register, so we use hwconfig.
+ */
+
+static int prototype_board(void)
+{
+	if (hwconfig_subarg("board", "rev", NULL))
+		return hwconfig_subarg_cmp("board", "rev", "prototype");
+	return 1;
+}
+
+static int esdhc_disables_uart0(void)
+{
+	return prototype_board() ||
+	       hwconfig_subarg_cmp("esdhc", "mode", "4-bits");
+}
+
+static void fdt_board_fixup_qe_uart(void *blob, bd_t *bd)
+{
+	u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE;
+	const char *devtype = "serial";
+	const char *compat = "ucc_uart";
+	const char *clk = "brg9";
+	u32 portnum = 0;
+	int off = -1;
+
+	if (!hwconfig("qe_uart"))
+		return;
+
+	if (hwconfig("esdhc") && esdhc_disables_uart0()) {
+		printf("QE UART: won't enable with esdhc.\n");
+		return;
+	}
+
+	fdt_board_disable_serial(blob, bd, "serial1");
+
+	while (1) {
+		const u32 *idx;
+		int len;
+
+		off = fdt_node_offset_by_compatible(blob, off, "ucc_geth");
+		if (off < 0) {
+			printf("WARNING: unable to fixup device tree for "
+				"QE UART\n");
+			return;
+		}
+
+		idx = fdt_getprop(blob, off, "cell-index", &len);
+		if (!idx || len != sizeof(*idx) || *idx != fdt32_to_cpu(2))
+			continue;
+		break;
+	}
+
+	fdt_setprop(blob, off, "device_type", devtype, strlen(devtype) + 1);
+	fdt_setprop(blob, off, "compatible", compat, strlen(compat) + 1);
+	fdt_setprop(blob, off, "tx-clock-name", clk, strlen(clk) + 1);
+	fdt_setprop(blob, off, "rx-clock-name", clk, strlen(clk) + 1);
+	fdt_setprop(blob, off, "port-number", &portnum, sizeof(portnum));
+
+	setbits_8(&bcsr[15], BCSR15_QEUART_EN);
+}
+
+#ifdef CONFIG_FSL_ESDHC
+
+int board_mmc_init(bd_t *bd)
+{
+	struct ccsr_gur *gur = (struct ccsr_gur *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+	u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE;
+	u8 bcsr6 = BCSR6_SD_CARD_1BIT;
+
+	if (!hwconfig("esdhc"))
+		return 0;
+
+	printf("Enabling eSDHC...\n"
+	       "  For eSDHC to function, I2C2 ");
+	if (esdhc_disables_uart0()) {
+		printf("and UART0 should be disabled.\n");
+		printf("  Redirecting stderr, stdout and stdin to UART1...\n");
+		console_assign(stderr, "eserial1");
+		console_assign(stdout, "eserial1");
+		console_assign(stdin, "eserial1");
+		printf("Switched to UART1 (initial log has been printed to "
+		       "UART0).\n");
+		bcsr6 |= BCSR6_SD_CARD_4BITS;
+	} else {
+		printf("should be disabled.\n");
+	}
+
+	/* Assign I2C2 signals to eSDHC. */
+	clrsetbits_be32(&gur->plppar1, PLPPAR1_I2C_BIT_MASK,
+				       PLPPAR1_ESDHC_VAL);
+	clrsetbits_be32(&gur->plpdir1, PLPDIR1_I2C_BIT_MASK,
+				       PLPDIR1_ESDHC_VAL);
+
+	/* Mux I2C2 (and optionally UART0) signals to eSDHC. */
+	setbits_8(&bcsr[6], bcsr6);
+
+	return fsl_esdhc_mmc_init(bd);
+}
+
+static void fdt_board_fixup_esdhc(void *blob, bd_t *bd)
+{
+	const char *status = "disabled";
+	int off = -1;
+
+	if (!hwconfig("esdhc"))
+		return;
+
+	if (esdhc_disables_uart0())
+		fdt_board_disable_serial(blob, bd, "serial0");
+
+	while (1) {
+		const u32 *idx;
+		int len;
+
+		off = fdt_node_offset_by_compatible(blob, off, "fsl-i2c");
+		if (off < 0)
+			break;
+
+		idx = fdt_getprop(blob, off, "cell-index", &len);
+		if (!idx || len != sizeof(*idx))
+			continue;
+
+		if (*idx == 1) {
+			fdt_setprop(blob, off, "status", status,
+				    strlen(status) + 1);
+			break;
+		}
+	}
+}
+#else
+static inline void fdt_board_fixup_esdhc(void *blob, bd_t *bd) {}
+#endif
+
+static void fdt_board_fixup_qe_usb(void *blob, bd_t *bd)
+{
+	u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE;
+
+	if (hwconfig_subarg_cmp("qe_usb", "speed", "low"))
+		clrbits_8(&bcsr[17], BCSR17_nUSBLOWSPD);
+	else
+		setbits_8(&bcsr[17], BCSR17_nUSBLOWSPD);
+
+	if (hwconfig_subarg_cmp("qe_usb", "mode", "peripheral")) {
+		clrbits_8(&bcsr[17], BCSR17_USBVCC);
+		clrbits_8(&bcsr[17], BCSR17_USBMODE);
+		do_fixup_by_compat(blob, "fsl,mpc8569-qe-usb", "mode",
+				   "peripheral", sizeof("peripheral"), 1);
+	} else {
+		setbits_8(&bcsr[17], BCSR17_USBVCC);
+		setbits_8(&bcsr[17], BCSR17_USBMODE);
+	}
+
+	clrbits_8(&bcsr[17], BCSR17_nUSBEN);
+}
+
 #ifdef CONFIG_PCIE1
 static struct pci_controller pcie1_hose;
 #endif  /* CONFIG_PCIE1 */
@@ -444,5 +651,8 @@ void ft_board_setup(void *blob, bd_t *bd)
 #ifdef CONFIG_PCIE1
 	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
 #endif
+	fdt_board_fixup_esdhc(blob, bd);
+	fdt_board_fixup_qe_uart(blob, bd);
+	fdt_board_fixup_qe_usb(blob, bd);
 }
 #endif

board/freescale/mpc8569mds/tlb.c

@@ -46,22 +46,24 @@ struct fsl_e_tlb_entry tlb_table[] = {
 
 	/* TLB 1 Initializations */
 	/*
-	 * TLBe 0:	16M	Non-cacheable, guarded
+	 * TLBe 0:	64M	Non-cacheable, guarded
-	 * 0xff000000	16M	FLASH (upper half)
 	 * Out of reset this entry is only 4K.
+	 * 0xfc000000	256K	NAND FLASH (CS3)
+	 * 0xfe000000	32M	NOR FLASH (CS0)
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x1000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE,
-		      CONFIG_SYS_FLASH_BASE_PHYS + 0x1000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 0, BOOKE_PAGESZ_16M, 1),
+		      0, 0, BOOKE_PAGESZ_64M, 1),
 
 	/*
-	 * TLBe 1:	16M	Non-cacheable, guarded
+	 * TLBe 1:	256KB	Non-cacheable, guarded
-	 * 0xfe000000	16M	FLASH (lower half)
+	 * 0xf8000000	32K	BCSR
+	 * 0xf8008000	32K	PIB (CS4)
+	 * 0xf8010000	32K	PIB (CS5)
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_BCSR_BASE, CONFIG_SYS_BCSR_BASE_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 1, BOOKE_PAGESZ_16M, 1),
+		      0, 1, BOOKE_PAGESZ_256K, 1),
 
 	/*
 	 * TLBe 2:	256M	Non-cacheable, guarded
@@ -88,16 +90,6 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_64M, 1),
-
-	/*
-	 * TLBe 5:	256K	Non-cacheable, guarded
-	 * 0xf8000000	32K BCSR
-	 * 0xf8008000	32K PIB (CS4)
-	 * 0xf8010000	32K PIB (CS5)
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_BCSR_BASE, CONFIG_SYS_BCSR_BASE_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 5, BOOKE_PAGESZ_256K, 1),
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);

board/freescale/mpc8572ds/mpc8572ds.c

@@ -199,7 +199,7 @@ void pci_init_board(void)
 				pcie_ep ? "End Point" : "Root Complex",
 				pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-					&pcie3_hose, first_free_busno);
+				&pcie3_hose, first_free_busno, pcie_ep);
 		/*
 		 * Activate ULI1575 legacy chip by performing a fake
 		 * memory access.  Needed to make ULI RTC work.
@@ -231,7 +231,7 @@ void pci_init_board(void)
 				pcie_ep ? "End Point" : "Root Complex",
 				pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-					&pcie2_hose, first_free_busno);
+				&pcie2_hose, first_free_busno, pcie_ep);
 	} else {
 		printf ("    PCIE2: disabled\n");
 	}
@@ -251,7 +251,7 @@ void pci_init_board(void)
 				pcie_ep ? "End Point" : "Root Complex",
 				pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-					&pcie1_hose, first_free_busno);
+				&pcie1_hose, first_free_busno, pcie_ep);
 	} else {
 		printf ("    PCIE1: disabled\n");
 	}

board/freescale/p1_p2_rdb/ddr.c

@@ -85,8 +85,8 @@ extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 #define CONFIG_SYS_DDR_TIMING_0_800	0x55770802
 #define CONFIG_SYS_DDR_TIMING_1_800	0x6f6b6543
 #define CONFIG_SYS_DDR_TIMING_2_800	0x0fa074d1
-#define CONFIG_SYS_DDR_CLK_CTRL_800	0x02000000
+#define CONFIG_SYS_DDR_CLK_CTRL_800	0x02800000
-#define CONFIG_SYS_DDR_MODE_1_800	0x00440862
+#define CONFIG_SYS_DDR_MODE_1_800	0x00040852
 #define CONFIG_SYS_DDR_MODE_2_800	0x00000000
 #define CONFIG_SYS_DDR_INTERVAL_800	0x0a280100
 
@@ -206,7 +206,7 @@ phys_size_t fixed_sdram (void)
 {
 	sys_info_t sysinfo;
 	char buf[32];
-	fsl_ddr_cfg_regs_t *ddr_cfg_regs = NULL;
+	fsl_ddr_cfg_regs_t ddr_cfg_regs;
 	size_t ddr_size;
 	struct cpu_type *cpu;
 
@@ -215,13 +215,13 @@ phys_size_t fixed_sdram (void)
 				strmhz(buf, sysinfo.freqDDRBus));
 
 	if(sysinfo.freqDDRBus <= DATARATE_400MHZ)
-		ddr_cfg_regs = &ddr_cfg_regs_400;
+		memcpy(&ddr_cfg_regs, &ddr_cfg_regs_400, sizeof(ddr_cfg_regs));
 	else if(sysinfo.freqDDRBus <= DATARATE_533MHZ)
-		ddr_cfg_regs = &ddr_cfg_regs_533;
+		memcpy(&ddr_cfg_regs, &ddr_cfg_regs_533, sizeof(ddr_cfg_regs));
 	else if(sysinfo.freqDDRBus <= DATARATE_667MHZ)
-		ddr_cfg_regs = &ddr_cfg_regs_667;
+		memcpy(&ddr_cfg_regs, &ddr_cfg_regs_667, sizeof(ddr_cfg_regs));
 	else if(sysinfo.freqDDRBus <= DATARATE_800MHZ)
-		ddr_cfg_regs = &ddr_cfg_regs_800;
+		memcpy(&ddr_cfg_regs, &ddr_cfg_regs_800, sizeof(ddr_cfg_regs));
 	else
 		panic("Unsupported DDR data rate %s MT/s data rate\n",
 					strmhz(buf, sysinfo.freqDDRBus));
@@ -230,14 +230,14 @@ phys_size_t fixed_sdram (void)
 	/* P1020 and it's derivatives support max 32bit DDR width */
 	if(cpu->soc_ver == SVR_P1020 || cpu->soc_ver == SVR_P1020_E ||
 		cpu->soc_ver == SVR_P1011 || cpu->soc_ver == SVR_P1011_E) {
-		ddr_cfg_regs->ddr_sdram_cfg |= SDRAM_CFG_32_BE;
+		ddr_cfg_regs.ddr_sdram_cfg |= SDRAM_CFG_32_BE;
-		ddr_cfg_regs->cs[0].bnds = 0x0000001F;
+		ddr_cfg_regs.cs[0].bnds = 0x0000001F;
 		ddr_size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 / 2);
 	}
 	else
 		ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 
-	fsl_ddr_set_memctl_regs(ddr_cfg_regs, 0);
+	fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0);
 
 	return ddr_size;
 }

board/freescale/p1_p2_rdb/pci.c

@@ -71,7 +71,7 @@ void pci_init_board(void)
 				pcie_ep ? "End Point" : "Root Complex",
 				pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-					&pcie2_hose, first_free_busno);
+					&pcie2_hose, first_free_busno, pcie_ep);
 	} else {
 		printf ("    PCIE2: disabled\n");
 	}
@@ -90,7 +90,7 @@ void pci_init_board(void)
 				pcie_ep ? "End Point" : "Root Complex",
 				pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-					&pcie1_hose, first_free_busno);
+					&pcie1_hose, first_free_busno, pcie_ep);
 	} else {
 		printf ("    PCIE1: disabled\n");
 	}

board/freescale/p2020ds/p2020ds.c

@@ -227,7 +227,7 @@ void pci_init_board(void)
 				pcie_ep ? "End Point" : "Root Complex",
 				pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-					&pcie2_hose, first_free_busno);
+				&pcie2_hose, first_free_busno, pcie_ep);
 
 		/*
 		 * The workaround doesn't work on p2020 because the location
@@ -267,7 +267,7 @@ void pci_init_board(void)
 				pcie_ep ? "End Point" : "Root Complex",
 				pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-					&pcie3_hose, first_free_busno);
+				&pcie3_hose, first_free_busno, pcie_ep);
 	} else {
 		printf("    PCIE3: disabled\n");
 	}
@@ -286,7 +286,7 @@ void pci_init_board(void)
 				pcie_ep ? "End Point" : "Root Complex",
 				pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-					&pcie1_hose, first_free_busno);
+				&pcie1_hose, first_free_busno, pcie_ep);
 	} else {
 		printf("    PCIE1: disabled\n");
 	}

board/sbc8548/sbc8548.c

@@ -359,7 +359,7 @@ pci_init_board(void)
 
 		SET_STD_PCI_INFO(pci_info[num], 1);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-					&pci1_hose, first_free_busno);
+					&pci1_hose, first_free_busno, 0);
 	} else {
 		printf ("    PCI: disabled\n");
 	}
@@ -378,7 +378,7 @@ pci_init_board(void)
 		SET_STD_PCIE_INFO(pci_info[num], 1);
 		printf ("    PCIE at base address %lx\n", pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-					&pcie1_hose, first_free_busno);
+					&pcie1_hose, first_free_busno, 0);
 	} else {
 		printf ("    PCIE: disabled\n");
 	}

board/xes/xpedite5370/tlb.c

@@ -61,32 +61,37 @@ struct fsl_e_tlb_entry tlb_table[] = {
 		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		0, 2, BOOKE_PAGESZ_1M, 1),
 
+	/* **M** - Boot page for secondary processors */
+	SET_TLB_ENTRY(1, CONFIG_BPTR_VIRT_ADDR, CONFIG_BPTR_VIRT_ADDR,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
+		0, 3, BOOKE_PAGESZ_4K, 1),
+
 #ifdef CONFIG_PCIE1
 	/* *I*G* - PCIe */
 	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_PHYS, CONFIG_SYS_PCIE1_MEM_PHYS,
 		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		0, 3, BOOKE_PAGESZ_1G, 1),
+		0, 4, BOOKE_PAGESZ_1G, 1),
 #endif
 
 #ifdef CONFIG_PCIE2
 	/* *I*G* - PCIe */
 	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE2_MEM_PHYS, CONFIG_SYS_PCIE2_MEM_PHYS,
 		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		0, 4, BOOKE_PAGESZ_256M, 1),
+		0, 5, BOOKE_PAGESZ_256M, 1),
 #endif
 
 #ifdef CONFIG_PCIE3
 	/* *I*G* - PCIe */
 	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS, CONFIG_SYS_PCIE3_MEM_PHYS,
 		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		0, 5, BOOKE_PAGESZ_256M, 1),
+		0, 6, BOOKE_PAGESZ_256M, 1),
 #endif
 
 #if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || defined(CONFIG_PCIE3)
 	/* *I*G* - PCIe */
 	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_PHYS, CONFIG_SYS_PCIE1_IO_PHYS,
 		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		0, 6, BOOKE_PAGESZ_64M, 1),
+		0, 7, BOOKE_PAGESZ_64M, 1),
 #endif
 
 };

common/fdt_support.c

@@ -22,6 +22,7 @@
  */
 
 #include <common.h>
+#include <stdio_dev.h>
 #include <linux/ctype.h>
 #include <linux/types.h>
 #include <asm/global_data.h>
@@ -90,6 +91,23 @@ int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
 }
 
 #ifdef CONFIG_OF_STDOUT_VIA_ALIAS
+
+#ifdef CONFIG_SERIAL_MULTI
+static void fdt_fill_multisername(char *sername, size_t maxlen)
+{
+	const char *outname = stdio_devices[stdout]->name;
+
+	if (strcmp(outname, "serial") > 0)
+		strncpy(sername, outname, maxlen);
+
+	/* eserial? */
+	if (strcmp(outname + 1, "serial") > 0)
+		strncpy(sername, outname + 1, maxlen);
+}
+#else
+static inline void fdt_fill_multisername(char *sername, size_t maxlen) {}
+#endif /* CONFIG_SERIAL_MULTI */
+
 static int fdt_fixup_stdout(void *fdt, int chosenoff)
 {
 	int err = 0;
@@ -98,7 +116,9 @@ static int fdt_fixup_stdout(void *fdt, int chosenoff)
 	char sername[9] = { 0 };
 	const char *path;
 
-	sprintf(sername, "serial%d", CONFIG_CONS_INDEX - 1);
+	fdt_fill_multisername(sername, sizeof(sername) - 1);
+	if (!sername[0])
+		sprintf(sername, "serial%d", CONFIG_CONS_INDEX - 1);
 
 	err = node = fdt_path_offset(fdt, "/aliases");
 	if (node >= 0) {

cpu/mpc85xx/config.mk

@@ -24,6 +24,11 @@
 PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi
 
 PLATFORM_CPPFLAGS += -ffixed-r2 -Wa,-me500 -msoft-float -mno-string
+
+# -mspe=yes is needed to have -mno-spe accepted by a buggy GCC;
+# see "[PATCH,rs6000] make -mno-spe work as expected" on
+# http://gcc.gnu.org/ml/gcc-patches/2008-04/msg00311.html
+PLATFORM_CPPFLAGS +=$(call cc-option,-mspe=yes)
 PLATFORM_CPPFLAGS +=$(call cc-option,-mno-spe)
 
 # Use default linker script.  Board port can override in board/*/config.mk

cpu/mpc85xx/cpu_init.c

@@ -360,8 +360,11 @@ int cpu_init_r(void)
 	/* enable the cache */
 	mtspr(SPRN_L2CSR0, CONFIG_SYS_INIT_L2CSR0);
 
-	if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E)
+	if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E) {
+		while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E))
+			;
 		printf("%d KB enabled\n", (l2cfg0 & 0x3fff) * 64);
+	}
 #else
 	puts("disabled\n");
 #endif

cpu/mpc85xx/fdt.c

@@ -43,7 +43,7 @@ extern void ft_fixup_num_cores(void *blob);
 void ft_fixup_cpu(void *blob, u64 memory_limit)
 {
 	int off;
-	ulong spin_tbl_addr = get_spin_addr();
+	ulong spin_tbl_addr = get_spin_phys_addr();
 	u32 bootpg = determine_mp_bootpg();
 	u32 id = get_my_id();
 

cpu/mpc85xx/mp.c

@@ -52,10 +52,10 @@ int cpu_status(int nr)
 	u32 *table, id = get_my_id();
 
 	if (nr == id) {
-		table = (u32 *)get_spin_addr();
+		table = (u32 *)get_spin_virt_addr();
 		printf("table base @ 0x%p\n", table);
 	} else {
-		table = (u32 *)get_spin_addr() + nr * NUM_BOOT_ENTRY;
+		table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
 		printf("Running on cpu %d\n", id);
 		printf("\n");
 		printf("table @ 0x%p\n", table);
@@ -77,7 +77,7 @@ static u8 boot_entry_map[4] = {
 
 int cpu_release(int nr, int argc, char *argv[])
 {
-	u32 i, val, *table = (u32 *)get_spin_addr() + nr * NUM_BOOT_ENTRY;
+	u32 i, val, *table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
 	u64 boot_addr;
 
 	if (nr == get_my_id()) {
@@ -124,23 +124,29 @@ u32 determine_mp_bootpg(void)
 	return (gd->ram_size - 4096);
 }
 
-ulong get_spin_addr(void)
+ulong get_spin_phys_addr(void)
 {
 	extern ulong __secondary_start_page;
 	extern ulong __spin_table;
 
-	ulong addr =
+	return (determine_mp_bootpg() +
-		(ulong)&__spin_table - (ulong)&__secondary_start_page;
+		(ulong)&__spin_table - (ulong)&__secondary_start_page);
-	addr += 0xfffff000;
+}
 
-	return addr;
+ulong get_spin_virt_addr(void)
+{
+	extern ulong __secondary_start_page;
+	extern ulong __spin_table;
+
+	return (CONFIG_BPTR_VIRT_ADDR +
+		(ulong)&__spin_table - (ulong)&__secondary_start_page);
 }
 
 #ifdef CONFIG_FSL_CORENET
 static void plat_mp_up(unsigned long bootpg)
 {
 	u32 up, cpu_up_mask, whoami;
-	u32 *table = (u32 *)get_spin_addr();
+	u32 *table = (u32 *)get_spin_virt_addr();
 	volatile ccsr_gur_t *gur;
 	volatile ccsr_local_t *ccm;
 	volatile ccsr_rcpm_t *rcpm;
@@ -194,12 +200,23 @@ static void plat_mp_up(unsigned long bootpg)
 	mtspr(SPRN_TBWU, 0);
 	mtspr(SPRN_TBWL, 0);
 	out_be32(&rcpm->ctbenrl, (1 << nr_cpus) - 1);
+
+#ifdef CONFIG_MPC8xxx_DISABLE_BPTR
+	/*
+	 * Disabling Boot Page Translation allows the memory region 0xfffff000
+	 * to 0xffffffff to be used normally.  Leaving Boot Page Translation
+	 * enabled remaps 0xfffff000 to SDRAM which makes that memory region
+	 * unusable for normal operation but it does allow OSes to easily
+	 * reset a processor core to put it back into U-Boot's spinloop.
+	 */
+	clrbits_be32(&ecm->bptr, 0x80000000);
+#endif
 }
 #else
 static void plat_mp_up(unsigned long bootpg)
 {
 	u32 up, cpu_up_mask, whoami;
-	u32 *table = (u32 *)get_spin_addr();
+	u32 *table = (u32 *)get_spin_virt_addr();
 	volatile u32 bpcr;
 	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
@@ -256,6 +273,17 @@ static void plat_mp_up(unsigned long bootpg)
 
 	devdisr &= ~(MPC85xx_DEVDISR_TB0 | MPC85xx_DEVDISR_TB1);
 	out_be32(&gur->devdisr, devdisr);
+
+#ifdef CONFIG_MPC8xxx_DISABLE_BPTR
+	/*
+	 * Disabling Boot Page Translation allows the memory region 0xfffff000
+	 * to 0xffffffff to be used normally.  Leaving Boot Page Translation
+	 * enabled remaps 0xfffff000 to SDRAM which makes that memory region
+	 * unusable for normal operation but it does allow OSes to easily
+	 * reset a processor core to put it back into U-Boot's spinloop.
+	 */
+	clrbits_be32(&ecm->bptr, 0x80000000);
+#endif
 }
 #endif
 
@@ -269,33 +297,27 @@ void cpu_mp_lmb_reserve(struct lmb *lmb)
 void setup_mp(void)
 {
 	extern ulong __secondary_start_page;
+	extern ulong __bootpg_addr;
 	ulong fixup = (ulong)&__secondary_start_page;
 	u32 bootpg = determine_mp_bootpg();
 
+	/* Store the bootpg's SDRAM address for use by secondary CPU cores */
+	__bootpg_addr = bootpg;
+
 	/* look for the tlb covering the reset page, there better be one */
-	int i = find_tlb_idx((void *)0xfffff000, 1);
+	int i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1);
 
 	/* we found a match */
 	if (i != -1) {
 		/* map reset page to bootpg so we can copy code there */
 		disable_tlb(i);
 
-		set_tlb(1, 0xfffff000, bootpg, /* tlb, epn, rpn */
+		set_tlb(1, CONFIG_BPTR_VIRT_ADDR, bootpg, /* tlb, epn, rpn */
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, /* perms, wimge */
-			0, i, BOOKE_PAGESZ_4K, 1); /* ts, esel, tsize, iprot */
-
-		memcpy((void *)0xfffff000, (void *)fixup, 4096);
-		flush_cache(0xfffff000, 4096);
-
-		disable_tlb(i);
-
-		/* setup reset page back to 1:1, we'll use HW boot translation
-		 * to map this where we want
-		 */
-		set_tlb(1, 0xfffff000, 0xfffff000, /* tlb, epn, rpn */
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I, /* perms, wimge */
 			0, i, BOOKE_PAGESZ_4K, 1); /* ts, esel, tsize, iprot */
 
+		memcpy((void *)CONFIG_BPTR_VIRT_ADDR, (void *)fixup, 4096);
+
 		plat_mp_up(bootpg);
 	} else {
 		puts("WARNING: No reset page TLB. "

cpu/mpc85xx/mp.h

@@ -3,7 +3,8 @@
 
 #include <asm/mp.h>
 
-ulong get_spin_addr(void);
+ulong get_spin_phys_addr(void);
+ulong get_spin_virt_addr(void);
 u32 get_my_id(void);
 
 #define BOOT_ENTRY_ADDR_UPPER	0

cpu/mpc85xx/release.S

@@ -138,23 +138,38 @@ __secondary_start_page:
 	stw	r3,ENTRY_R6_UPPER(r10)
 	stw	r3,ENTRY_R6_LOWER(r10)
 
+	/* load r13 with the address of the 'bootpg' in SDRAM */
+	lis	r13,toreset(__bootpg_addr)@h
+	ori	r13,r13,toreset(__bootpg_addr)@l
+	lwz	r13,0(r13)
+
 	/* setup mapping for AS = 1, and jump there */
 	lis	r11,(MAS0_TLBSEL(1)|MAS0_ESEL(1))@h
 	mtspr	SPRN_MAS0,r11
 	lis	r11,(MAS1_VALID|MAS1_IPROT)@h
 	ori	r11,r11,(MAS1_TS|MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
 	mtspr	SPRN_MAS1,r11
-	lis	r11,(0xfffff000|MAS2_I)@h
+	oris	r11,r13,(MAS2_I)@h
-	ori	r11,r11,(0xfffff000|MAS2_I)@l
+	ori	r11,r13,(MAS2_I)@l
 	mtspr	SPRN_MAS2,r11
-	lis	r11,(0xfffff000|MAS3_SX|MAS3_SW|MAS3_SR)@h
+	oris	r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@h
-	ori	r11,r11,(0xfffff000|MAS3_SX|MAS3_SW|MAS3_SR)@l
+	ori	r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@l
 	mtspr	SPRN_MAS3,r11
 	tlbwe
 
 	bl	1f
 1:	mflr	r11
-	addi	r11,r11,28
+	/*
+	 * OR in 0xfff to create a mask of the bootpg SDRAM address.  We use
+	 * this mask to fixup the cpu spin table and the address that we want
+	 * to jump to, eg change them from 0xfffffxxx to 0x7ffffxxx if the
+	 * bootpg is at 0x7ffff000 in SDRAM.
+	 */
+	ori	r13,r13,0xfff
+	and	r11, r11, r13
+	and	r10, r10, r13
+
+	addi	r11,r11,(2f-1b)
 	mfmsr	r13
 	ori	r12,r13,MSR_IS|MSR_DS@l
 
@@ -227,6 +242,15 @@ __secondary_start_page:
 	mtspr	SPRN_SRR1,r13
 	rfi
 
+	/*
+	 * Allocate some space for the SDRAM address of the bootpg.
+	 * This variable has to be in the boot page so that it can
+	 * be accessed by secondary cores when they come out of reset.
+	 */
+	.globl __bootpg_addr
+__bootpg_addr:
+	.long	0
+
 	.align L1_CACHE_SHIFT
 	.globl __spin_table
 __spin_table:

cpu/mpc85xx/speed.c

@@ -240,8 +240,12 @@ int get_clocks (void)
 	gd->i2c2_clk = gd->i2c1_clk;
 
 #if defined(CONFIG_FSL_ESDHC)
+#ifdef CONFIG_MPC8569
+	gd->sdhc_clk = gd->bus_clk;
+#else
 	gd->sdhc_clk = gd->bus_clk / 2;
 #endif
+#endif /* defined(CONFIG_FSL_ESDHC) */
 
 #if defined(CONFIG_CPM2)
 	gd->vco_out = 2*sys_info.freqSystemBus;

drivers/pci/fsl_pci_init.c

@@ -1,5 +1,5 @@
 /*
- * Copyright 2007 Freescale Semiconductor, Inc.
+ * Copyright 2007-2009 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -413,13 +413,27 @@ void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data)
 }
 
 int fsl_pci_init_port(struct fsl_pci_info *pci_info,
-			struct pci_controller *hose, int busno)
+			struct pci_controller *hose, int busno, int pcie_ep)
 {
 	volatile ccsr_fsl_pci_t *pci;
 	struct pci_region *r;
 
 	pci = (ccsr_fsl_pci_t *) pci_info->regs;
 
+	if (pcie_ep) {
+		volatile pit_t *pi = &pci->pit[2];
+
+		pci_setup_indirect(hose, (u32)&pci->cfg_addr,
+					 (u32)&pci->cfg_data);
+		out_be32(&pi->pitar, 0);
+		out_be32(&pi->piwbar, 0);
+		out_be32(&pi->piwar, PIWAR_EN | PIWAR_LOCAL |
+			PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_IWS_4K);
+
+		fsl_pci_config_unlock(hose);
+		return 0;
+	}
+
 	/* on non-PCIe controllers we don't have pme_msg_det so this code
 	 * should do nothing since the read will return 0
 	 */

drivers/qe/fdt.c

@@ -85,6 +85,8 @@ void ft_qe_setup(void *blob)
 		"bus-frequency", gd->qe_clk, 1);
 	do_fixup_by_compat_u32(blob, "fsl,qe",
 		"brg-frequency", gd->brg_clk, 1);
+	do_fixup_by_compat_u32(blob, "fsl,qe-gtm",
+		"clock-frequency", gd->qe_clk / 2, 1);
 	fdt_fixup_qe_firmware(blob);
 #endif
 }

include/asm-ppc/config.h

@@ -47,6 +47,16 @@
 #define CONFIG_MAX_CPUS		1
 #endif
 
+/*
+ * Provide a default boot page translation virtual address that lines up with
+ * Freescale's default e500 reset page.
+ */
+#if (defined(CONFIG_E500) && defined(CONFIG_MP))
+#ifndef CONFIG_BPTR_VIRT_ADDR
+#define CONFIG_BPTR_VIRT_ADDR	0xfffff000
+#endif
+#endif
+
 /* Relocation to SDRAM works on all PPC boards */
 #define CONFIG_RELOC_FIXUP_WORKS
 

include/asm-ppc/fsl_pci.h

@@ -62,6 +62,7 @@ typedef struct pci_inbound_window {
 #define PIWAR_LOCAL		0x00f00000
 #define PIWAR_READ_SNOOP	0x00050000
 #define PIWAR_WRITE_SNOOP	0x00005000
+#define PIWAR_IWS_4K		0x0000000b
 	u32	res2[3];
 } pit_t;
 
@@ -171,7 +172,7 @@ struct fsl_pci_info {
 };
 
 int fsl_pci_init_port(struct fsl_pci_info *pci_info,
-				struct pci_controller *hose, int busno);
+			struct pci_controller *hose, int busno, int pcie_ep);
 
 #define SET_STD_PCI_INFO(x, num) \
 {			\

include/configs/MPC8569MDS.h

@@ -70,6 +70,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_ENABLE_36BIT_PHYS	1
 
 #define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
+#define CONFIG_HWCONFIG
 
 #define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x00400000
@@ -180,6 +181,29 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 
+/* Chip select 3 - NAND */
+#define CONFIG_SYS_NAND_BASE		0xFC000000
+#define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
+#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE, }
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_MTD_NAND_VERIFY_WRITE	1
+#define CONFIG_CMD_NAND			1
+#define CONFIG_NAND_FSL_ELBC		1
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
+#define CONFIG_NAND_BR_PRELIM	(CONFIG_SYS_NAND_BASE_PHYS \
+				| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
+				| BR_PS_8	     /* Port Size = 8 bit */ \
+				| BR_MS_FCM	     /* MSEL = FCM */ \
+				| BR_V)		     /* valid */
+#define CONFIG_NAND_OR_PRELIM	(0xFFFC0000	     /* length 256K */ \
+				| OR_FCM_CSCT \
+				| OR_FCM_CST \
+				| OR_FCM_CHT \
+				| OR_FCM_SCY_1 \
+				| OR_FCM_TRLX \
+				| OR_FCM_EHTR)
+#define CONFIG_SYS_BR3_PRELIM	CONFIG_NAND_BR_PRELIM /* NAND Base Address */
+#define CONFIG_SYS_OR3_PRELIM	CONFIG_NAND_OR_PRELIM /* NAND Options */
 
 /*
  * SDRAM on the LocalBus
@@ -206,6 +230,7 @@ extern unsigned long get_clock_freq(void);
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX		1
+#define CONFIG_SERIAL_MULTI		1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
@@ -258,8 +283,10 @@ extern unsigned long get_clock_freq(void);
 
 #define PLPPAR1_I2C_BIT_MASK		0x0000000F
 #define PLPPAR1_I2C2_VAL		0x00000000
+#define PLPPAR1_ESDHC_VAL		0x0000000A
 #define PLPDIR1_I2C_BIT_MASK		0x0000000F
 #define PLPDIR1_I2C2_VAL		0x0000000F
+#define PLPDIR1_ESDHC_VAL		0x00000006
 
 /*
  * General PCI
@@ -450,6 +477,18 @@ extern unsigned long get_clock_freq(void);
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
 
+#define CONFIG_MMC     1
+
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
 /*
  * Miscellaneous configurable options
  */

include/configs/XPEDITE5370.h

@@ -48,6 +48,13 @@
 #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
 #define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
+/*
+ * Multicore config
+ */
+#define CONFIG_MP
+#define CONFIG_BPTR_VIRT_ADDR	0xee000000	/* virt boot page address */
+#define CONFIG_MPC8xxx_DISABLE_BPTR		/* Don't leave BPTR enabled */
+
 /*
  * DDR config
  */
@@ -109,6 +116,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  * 0xe000_0000	0xe7ff_ffff	SRAM/SSRAM/L1 Cache	128M non-cacheable
  * 0xe800_0000	0xe87f_ffff	PCIe1 IO		8M non-cacheable
  * 0xe880_0000	0xe8ff_ffff	PCIe2 IO		8M non-cacheable
+ * 0xee00_0000	0xee00_ffff	Boot page translation	4K non-cacheable
  * 0xef00_0000	0xef0f_ffff	CCSR/IMMR		1M non-cacheable
  * 0xef80_0000	0xef8f_ffff	NAND Flash		1M non-cacheable
  * 0xf000_0000	0xf7ff_ffff	NOR Flash 2		128M non-cacheable

nand_spl/board/freescale/mpc8536ds/Makefile

@@ -111,6 +111,12 @@ $(obj)tlb_table.c:
 	@rm -f $(obj)tlb_table.c
 	ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c
 
+ifneq ($(OBJTREE), $(SRCTREE))
+$(obj)nand_boot.c:
+	@rm -f $(obj)nand_boot.c
+	ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c
+endif
+
 #########################################################################
 
 $(obj)%.o:	$(obj)%.S

nand_spl/board/freescale/p1_p2_rdb/Makefile

@@ -111,6 +111,12 @@ $(obj)tlb_table.c:
 	@rm -f $(obj)tlb_table.c
 	ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c
 
+ifneq ($(OBJTREE), $(SRCTREE))
+$(obj)nand_boot.c:
+	@rm -f $(obj)nand_boot.c
+	ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c
+endif
+
 #########################################################################
 
 $(obj)%.o:	$(obj)%.S

nand_spl/board/freescale/p1_p2_rdb/nand_boot.c

@@ -41,7 +41,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void board_init_f(ulong bootflag)
 {
-	uint plat_ratio, bus_clk, sys_clk;
+	uint plat_ratio, bus_clk, sys_clk = 0;
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	volatile ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
 	uint val, temp, sysclk_mask;