mirror of
https://github.com/Fishwaldo/u-boot.git
synced 2025-03-21 06:31:31 +00:00
ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3
Update all A23/A33/r16 devicetree dtsi and dtsi files from
Linux-v4.18-rc3 with below commits.
A23:
commit bc3bd041fe766219a44688b182c260064007f0cc
Author: Miquel Raynal <miquel.raynal@bootlin.com>
Date: Tue Apr 24 17:55:02 2018 +0200
ARM: dts: sun8i: a23/a33: declare NAND pins
A33:
commit 88fe315d2c0a397ef42d7639addab0e021ae911d
Author: Maxime Ripard <maxime.ripard@bootlin.com>
Date: Wed Apr 4 11:57:15 2018 +0200
ARM: dts: sun8i: a33: Add the DSI-related nodes
r16:
commit 9621d0bd1b0d61167e1853ac68cf4869c31bcc96
Author: Miquel Raynal <miquel.raynal@bootlin.com>
Date: Tue Apr 24 17:55:03 2018 +0200
ARM: dts: nes: add Nintendo NES/SuperNES Classic Edition support
Note:
- Drop pinctrl from sun8i-r16-nintendo-nes-classic-edition.dts since
sun8i-a23-a33.dtsi is added with Linux sync.
- Don't sync non U-Boot supported dts files
sun8i-a23-ippo-q8h-v1.2.dts
sun8i-a23-ippo-q8h-v5.dts
sun8i-a33-et-q8-v1.6.dts
sun8i-a33-ippo-q8h-v1.2.dts
sun8i-r16-nintendo-nes-classic.dts
sun8i-r16-nintendo-super-nes-classic.dts
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
This commit is contained in:
Jagan Teki
parent
b9d59d08a6
commit
9ad93c0c96
18 changed files with 338 additions and 232 deletions
|
|
@ -118,13 +118,13 @@
|
|||
};
|
||||
};
|
||||
|
||||
soc@01c00000 {
|
||||
soc@1c00000 {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
dma: dma-controller@01c02000 {
|
||||
dma: dma-controller@1c02000 {
|
||||
compatible = "allwinner,sun8i-a23-dma";
|
||||
reg = <0x01c02000 0x1000>;
|
||||
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -133,7 +133,7 @@
|
|||
#dma-cells = <1>;
|
||||
};
|
||||
|
||||
mmc0: mmc@01c0f000 {
|
||||
mmc0: mmc@1c0f000 {
|
||||
compatible = "allwinner,sun7i-a20-mmc";
|
||||
reg = <0x01c0f000 0x1000>;
|
||||
clocks = <&ccu CLK_BUS_MMC0>,
|
||||
|
|
@ -152,7 +152,7 @@
|
|||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
mmc1: mmc@01c10000 {
|
||||
mmc1: mmc@1c10000 {
|
||||
compatible = "allwinner,sun7i-a20-mmc";
|
||||
reg = <0x01c10000 0x1000>;
|
||||
clocks = <&ccu CLK_BUS_MMC1>,
|
||||
|
|
@ -171,7 +171,7 @@
|
|||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
mmc2: mmc@01c11000 {
|
||||
mmc2: mmc@1c11000 {
|
||||
compatible = "allwinner,sun7i-a20-mmc";
|
||||
reg = <0x01c11000 0x1000>;
|
||||
clocks = <&ccu CLK_BUS_MMC2>,
|
||||
|
|
@ -190,7 +190,7 @@
|
|||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
nfc: nand@01c03000 {
|
||||
nfc: nand@1c03000 {
|
||||
compatible = "allwinner,sun4i-a10-nand";
|
||||
reg = <0x01c03000 0x1000>;
|
||||
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -198,12 +198,14 @@
|
|||
clock-names = "ahb", "mod";
|
||||
resets = <&ccu RST_BUS_NAND>;
|
||||
reset-names = "ahb";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&nand_pins &nand_pins_cs0 &nand_pins_rb0>;
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
usb_otg: usb@01c19000 {
|
||||
usb_otg: usb@1c19000 {
|
||||
/* compatible gets set in SoC specific dtsi file */
|
||||
reg = <0x01c19000 0x0400>;
|
||||
clocks = <&ccu CLK_BUS_OTG>;
|
||||
|
|
@ -216,7 +218,7 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
usbphy: phy@01c19400 {
|
||||
usbphy: phy@1c19400 {
|
||||
/*
|
||||
* compatible and address regions get set in
|
||||
* SoC specific dtsi file
|
||||
|
|
@ -233,7 +235,7 @@
|
|||
#phy-cells = <1>;
|
||||
};
|
||||
|
||||
ehci0: usb@01c1a000 {
|
||||
ehci0: usb@1c1a000 {
|
||||
compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
|
||||
reg = <0x01c1a000 0x100>;
|
||||
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -244,7 +246,7 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
ohci0: usb@01c1a400 {
|
||||
ohci0: usb@1c1a400 {
|
||||
compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
|
||||
reg = <0x01c1a400 0x100>;
|
||||
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -255,7 +257,7 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
ccu: clock@01c20000 {
|
||||
ccu: clock@1c20000 {
|
||||
reg = <0x01c20000 0x400>;
|
||||
clocks = <&osc24M>, <&rtc 0>;
|
||||
clock-names = "hosc", "losc";
|
||||
|
|
@ -263,7 +265,7 @@
|
|||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
pio: pinctrl@01c20800 {
|
||||
pio: pinctrl@1c20800 {
|
||||
/* compatible gets set in SoC specific dtsi file */
|
||||
reg = <0x01c20800 0x400>;
|
||||
/* interrupts get set in SoC specific dtsi file */
|
||||
|
|
@ -289,23 +291,6 @@
|
|||
function = "uart1";
|
||||
};
|
||||
|
||||
nand_pins_a: nand-base0@0 {
|
||||
pins = "PC0", "PC1", "PC2", "PC5",
|
||||
"PC8", "PC9", "PC10", "PC11",
|
||||
"PC12", "PC13", "PC14", "PC15";
|
||||
function = "nand0";
|
||||
};
|
||||
|
||||
nand_cs0_pins_a: nand-cs@0 {
|
||||
pins = "PC4";
|
||||
function = "nand0";
|
||||
};
|
||||
|
||||
nand_rb0_pins_a: nand-rb@0 {
|
||||
pins = "PC6";
|
||||
function = "nand0";
|
||||
};
|
||||
|
||||
mmc0_pins_a: mmc0@0 {
|
||||
pins = "PF0", "PF1", "PF2",
|
||||
"PF3", "PF4", "PF5";
|
||||
|
|
@ -332,6 +317,37 @@
|
|||
bias-pull-up;
|
||||
};
|
||||
|
||||
nand_pins: nand-pins {
|
||||
pins = "PC0", "PC1", "PC2", "PC5",
|
||||
"PC8", "PC9", "PC10", "PC11",
|
||||
"PC12", "PC13", "PC14", "PC15";
|
||||
function = "nand0";
|
||||
};
|
||||
|
||||
nand_pins_cs0: nand-pins-cs0 {
|
||||
pins = "PC4";
|
||||
function = "nand0";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
nand_pins_cs1: nand-pins-cs1 {
|
||||
pins = "PC3";
|
||||
function = "nand0";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
nand_pins_rb0: nand-pins-rb0 {
|
||||
pins = "PC6";
|
||||
function = "nand0";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
nand_pins_rb1: nand-pins-rb1 {
|
||||
pins = "PC7";
|
||||
function = "nand0";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
pwm0_pins: pwm0 {
|
||||
pins = "PH0";
|
||||
function = "pwm0";
|
||||
|
|
@ -361,7 +377,7 @@
|
|||
};
|
||||
};
|
||||
|
||||
timer@01c20c00 {
|
||||
timer@1c20c00 {
|
||||
compatible = "allwinner,sun4i-a10-timer";
|
||||
reg = <0x01c20c00 0xa0>;
|
||||
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
|
||||
|
|
@ -369,13 +385,13 @@
|
|||
clocks = <&osc24M>;
|
||||
};
|
||||
|
||||
wdt0: watchdog@01c20ca0 {
|
||||
wdt0: watchdog@1c20ca0 {
|
||||
compatible = "allwinner,sun6i-a31-wdt";
|
||||
reg = <0x01c20ca0 0x20>;
|
||||
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
pwm: pwm@01c21400 {
|
||||
pwm: pwm@1c21400 {
|
||||
compatible = "allwinner,sun7i-a20-pwm";
|
||||
reg = <0x01c21400 0xc>;
|
||||
clocks = <&osc24M>;
|
||||
|
|
@ -383,14 +399,14 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
lradc: lradc@01c22800 {
|
||||
lradc: lradc@1c22800 {
|
||||
compatible = "allwinner,sun4i-a10-lradc-keys";
|
||||
reg = <0x01c22800 0x100>;
|
||||
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart0: serial@01c28000 {
|
||||
uart0: serial@1c28000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01c28000 0x400>;
|
||||
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -403,7 +419,7 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
uart1: serial@01c28400 {
|
||||
uart1: serial@1c28400 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01c28400 0x400>;
|
||||
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -416,7 +432,7 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
uart2: serial@01c28800 {
|
||||
uart2: serial@1c28800 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01c28800 0x400>;
|
||||
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -429,7 +445,7 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
uart3: serial@01c28c00 {
|
||||
uart3: serial@1c28c00 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01c28c00 0x400>;
|
||||
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -442,7 +458,7 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
uart4: serial@01c29000 {
|
||||
uart4: serial@1c29000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01c29000 0x400>;
|
||||
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -455,7 +471,7 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c0: i2c@01c2ac00 {
|
||||
i2c0: i2c@1c2ac00 {
|
||||
compatible = "allwinner,sun6i-a31-i2c";
|
||||
reg = <0x01c2ac00 0x400>;
|
||||
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -466,7 +482,7 @@
|
|||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
i2c1: i2c@01c2b000 {
|
||||
i2c1: i2c@1c2b000 {
|
||||
compatible = "allwinner,sun6i-a31-i2c";
|
||||
reg = <0x01c2b000 0x400>;
|
||||
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -477,7 +493,7 @@
|
|||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
i2c2: i2c@01c2b400 {
|
||||
i2c2: i2c@1c2b400 {
|
||||
compatible = "allwinner,sun6i-a31-i2c";
|
||||
reg = <0x01c2b400 0x400>;
|
||||
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -515,7 +531,7 @@
|
|||
assigned-clock-rates = <384000000>;
|
||||
};
|
||||
|
||||
gic: interrupt-controller@01c81000 {
|
||||
gic: interrupt-controller@1c81000 {
|
||||
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
|
||||
reg = <0x01c81000 0x1000>,
|
||||
<0x01c82000 0x2000>,
|
||||
|
|
@ -526,7 +542,7 @@
|
|||
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
||||
};
|
||||
|
||||
rtc: rtc@01f00000 {
|
||||
rtc: rtc@1f00000 {
|
||||
compatible = "allwinner,sun6i-a31-rtc";
|
||||
reg = <0x01f00000 0x54>;
|
||||
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
|
||||
|
|
@ -544,7 +560,7 @@
|
|||
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
prcm@01f01400 {
|
||||
prcm@1f01400 {
|
||||
compatible = "allwinner,sun8i-a23-prcm";
|
||||
reg = <0x01f01400 0x200>;
|
||||
|
||||
|
|
@ -592,12 +608,12 @@
|
|||
};
|
||||
};
|
||||
|
||||
cpucfg@01f01c00 {
|
||||
cpucfg@1f01c00 {
|
||||
compatible = "allwinner,sun8i-a23-cpuconfig";
|
||||
reg = <0x01f01c00 0x300>;
|
||||
};
|
||||
|
||||
r_uart: serial@01f02800 {
|
||||
r_uart: serial@1f02800 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01f02800 0x400>;
|
||||
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -608,7 +624,7 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
r_pio: pinctrl@01f02c00 {
|
||||
r_pio: pinctrl@1f02c00 {
|
||||
compatible = "allwinner,sun8i-a23-r-pinctrl";
|
||||
reg = <0x01f02c00 0x400>;
|
||||
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -635,7 +651,7 @@
|
|||
};
|
||||
};
|
||||
|
||||
r_rsb: rsb@01f03400 {
|
||||
r_rsb: rsb@1f03400 {
|
||||
compatible = "allwinner,sun8i-a23-rsb";
|
||||
reg = <0x01f03400 0x400>;
|
||||
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
|
|||
|
|
@ -48,7 +48,6 @@
|
|||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/pinctrl/sun4i-a10.h>
|
||||
|
||||
/ {
|
||||
model = "Allwinner A23 Evaluation Board";
|
||||
|
|
@ -108,17 +107,15 @@
|
|||
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_evb>;
|
||||
vmmc-supply = <®_vcc3v0>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
|
||||
cd-inverted;
|
||||
cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
mmc0_cd_pin_evb: mmc0_cd_pin@0 {
|
||||
allwinner,pins = "PB4";
|
||||
allwinner,function = "gpio_in";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
||||
pins = "PB4";
|
||||
function = "gpio_in";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -53,9 +53,10 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&gsl1680 {
|
||||
&touchscreen {
|
||||
reg = <0x40>;
|
||||
compatible = "silead,gsl3675";
|
||||
touchscreen-fw-name = "silead/gsl3675-gt90h.fw";
|
||||
firmware-name = "gsl3675-gt90h.fw";
|
||||
touchscreen-size-x = <1792>;
|
||||
touchscreen-size-y = <1024>;
|
||||
status = "okay";
|
||||
|
|
|
|||
|
|
@ -53,10 +53,12 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&gsl1680 {
|
||||
&touchscreen {
|
||||
reg = <0x40>;
|
||||
compatible = "silead,gsl1680";
|
||||
firmware-name = "gsl1680-inet86dz.fw";
|
||||
touchscreen-size-x = <960>;
|
||||
touchscreen-size-y = <640>;
|
||||
touchscreen-fw-name = "silead/gsl1680-inet86dz.fw";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -62,14 +62,11 @@
|
|||
};
|
||||
};
|
||||
|
||||
&gsl1680 {
|
||||
vddio-supply = <®_ldo_io1>;
|
||||
touchscreen-size-x = <960>;
|
||||
touchscreen-size-y = <640>;
|
||||
touchscreen-inverted-x;
|
||||
touchscreen-inverted-y;
|
||||
touchscreen-fw-name = "silead/gsl1680-polaroid-mid2407pxe03.fw";
|
||||
status = "okay";
|
||||
&i2c1 {
|
||||
mma7660: accelerometer@4c {
|
||||
reg = <0x4c>;
|
||||
compatible = "fsl,mma7660";
|
||||
};
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
|
|
@ -89,21 +86,24 @@
|
|||
};
|
||||
|
||||
&mmc1_pins_a {
|
||||
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
&r_pio {
|
||||
wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 {
|
||||
allwinner,pins = "PL6";
|
||||
allwinner,function = "gpio_out";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
pins = "PL6";
|
||||
function = "gpio_out";
|
||||
};
|
||||
};
|
||||
|
||||
®_ldo_io1 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-touchscreen";
|
||||
&touchscreen {
|
||||
reg = <0x40>;
|
||||
compatible = "silead,gsl1680";
|
||||
firmware-name = "gsl1680-polaroid-mid2407pxe03.fw";
|
||||
touchscreen-size-x = <960>;
|
||||
touchscreen-size-y = <640>;
|
||||
touchscreen-inverted-x;
|
||||
touchscreen-inverted-y;
|
||||
vddio-supply = <®_ldo_io1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -62,14 +62,6 @@
|
|||
};
|
||||
};
|
||||
|
||||
&gsl1680 {
|
||||
compatible = "silead,gsl3670";
|
||||
touchscreen-fw-name = "silead/gsl3670-polaroid-mid2809pxe04.fw";
|
||||
touchscreen-size-x = <1660>;
|
||||
touchscreen-size-y = <890>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc1_pins_a>;
|
||||
|
|
@ -87,14 +79,21 @@
|
|||
};
|
||||
|
||||
&mmc1_pins_a {
|
||||
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
&r_pio {
|
||||
wifi_pwrseq_pin_mid2809: wifi_pwrseq_pin@0 {
|
||||
allwinner,pins = "PL6";
|
||||
allwinner,function = "gpio_out";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
pins = "PL6";
|
||||
function = "gpio_out";
|
||||
};
|
||||
};
|
||||
|
||||
&touchscreen {
|
||||
reg = <0x40>;
|
||||
compatible = "silead,gsl3670";
|
||||
firmware-name = "gsl3670-polaroid-mid2809pxe04.fw";
|
||||
touchscreen-size-x = <1660>;
|
||||
touchscreen-size-y = <890>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -48,3 +48,16 @@
|
|||
model = "Q8 A23 Tablet";
|
||||
compatible = "allwinner,q8-a23", "allwinner,sun8i-a23";
|
||||
};
|
||||
|
||||
&codec {
|
||||
allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
|
||||
allwinner,audio-routing =
|
||||
"Headphone", "HP",
|
||||
"Headphone", "HPCOM",
|
||||
"Speaker", "HP",
|
||||
"MIC1", "Mic",
|
||||
"MIC2", "Headset Mic",
|
||||
"Mic", "MBIAS",
|
||||
"Headset Mic", "HBIAS";
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -49,8 +49,8 @@
|
|||
reg = <0x40000000 0x40000000>;
|
||||
};
|
||||
|
||||
soc@01c00000 {
|
||||
codec: codec@01c22c00 {
|
||||
soc@1c00000 {
|
||||
codec: codec@1c22c00 {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "allwinner,sun8i-a23-codec";
|
||||
reg = <0x01c22c00 0x400>;
|
||||
|
|
|
|||
|
|
@ -58,9 +58,10 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&gsl1680 {
|
||||
&touchscreen {
|
||||
reg = <0x40>;
|
||||
compatible = "silead,gsl3675";
|
||||
touchscreen-fw-name = "silead/gsl3675-ga10h.fw";
|
||||
firmware-name = "gsl3675-ga10h.fw";
|
||||
touchscreen-size-x = <1630>;
|
||||
touchscreen-size-y = <990>;
|
||||
touchscreen-inverted-y;
|
||||
|
|
|
|||
|
|
@ -49,6 +49,15 @@
|
|||
model = "INet-D978 Rev 02";
|
||||
compatible = "primux,inet-d978-rev2", "allwinner,sun8i-a33";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
/* Delete debug UART as serial0 is the UART for bluetooth */
|
||||
/delete-property/stdout-path;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
|
|
@ -62,7 +71,7 @@
|
|||
};
|
||||
|
||||
&mmc1_pins_a {
|
||||
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
|
|
@ -80,9 +89,19 @@
|
|||
|
||||
&r_pio {
|
||||
led_pin_d978: led_pin_d978@0 {
|
||||
allwinner,pins = "PL5";
|
||||
allwinner,function = "gpio_out";
|
||||
allwinner,drive = <SUN4I_PINCTRL_20_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
pins = "PL5";
|
||||
function = "gpio_out";
|
||||
drive-strength = <20>;
|
||||
};
|
||||
};
|
||||
|
||||
&r_uart {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_pins_a>,
|
||||
<&uart1_pins_cts_rts_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -43,7 +43,6 @@
|
|||
|
||||
/dts-v1/;
|
||||
#include "sun8i-a33.dtsi"
|
||||
#include "sunxi-common-regulators.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
|
@ -62,8 +61,6 @@
|
|||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_pin_olinuxino>;
|
||||
|
||||
green {
|
||||
label = "a33-olinuxino:green:usr";
|
||||
|
|
@ -72,17 +69,24 @@
|
|||
};
|
||||
};
|
||||
|
||||
&codec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dai {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
|
||||
pinctrl-0 = <&mmc0_pins_a>;
|
||||
vmmc-supply = <®_dcdc1>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
|
||||
cd-inverted;
|
||||
cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
@ -90,29 +94,6 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
led_pin_olinuxino: led_pins@0 {
|
||||
allwinner,pins = "PB7";
|
||||
allwinner,function = "gpio_out";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
};
|
||||
|
||||
mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
|
||||
allwinner,pins = "PB4";
|
||||
allwinner,function = "gpio_in";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
};
|
||||
|
||||
usb0_id_detect_pin: usb0_id_detect_pin@0 {
|
||||
allwinner,pins = "PB3";
|
||||
allwinner,function = "gpio_in";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
};
|
||||
};
|
||||
|
||||
&r_rsb {
|
||||
status = "okay";
|
||||
|
||||
|
|
@ -126,7 +107,15 @@
|
|||
};
|
||||
};
|
||||
|
||||
#include "axp22x.dtsi"
|
||||
#include "axp223.dtsi"
|
||||
|
||||
&ac_power_supply {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&battery_power_supply {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
®_aldo1 {
|
||||
regulator-always-on;
|
||||
|
|
@ -201,6 +190,21 @@
|
|||
vcc-lcd-supply = <®_dc1sw>;
|
||||
};
|
||||
|
||||
&sound {
|
||||
/* Board level jack widgets */
|
||||
simple-audio-card,widgets = "Microphone", "Microphone Jack",
|
||||
"Headphone", "Headphone Jack";
|
||||
/* Board level routing. First 2 routes copied from SoC level */
|
||||
simple-audio-card,routing =
|
||||
"Left DAC", "AIF1 Slot 0 Left",
|
||||
"Right DAC", "AIF1 Slot 0 Right",
|
||||
"HP", "HPCOM",
|
||||
"Headphone Jack", "HP",
|
||||
"MIC1", "Microphone Jack",
|
||||
"Microphone Jack", "MBIAS";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins_b>;
|
||||
|
|
@ -217,8 +221,6 @@
|
|||
};
|
||||
|
||||
&usbphy {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb0_id_detect_pin>;
|
||||
usb0_id_det-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
|
||||
usb0_vbus_power-supply = <&usb_power_supply>;
|
||||
usb0_vbus-supply = <®_drivevbus>;
|
||||
|
|
|
|||
|
|
@ -48,7 +48,6 @@
|
|||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/pinctrl/sun4i-a10.h>
|
||||
|
||||
/ {
|
||||
model = "Sinlinx SinA33";
|
||||
|
|
@ -80,7 +79,7 @@
|
|||
};
|
||||
};
|
||||
|
||||
&de {
|
||||
&codec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
@ -88,6 +87,28 @@
|
|||
cpu-supply = <®_dcdc3>;
|
||||
};
|
||||
|
||||
&cpu0_opp_table {
|
||||
opp-1104000000 {
|
||||
opp-hz = /bits/ 64 <1104000000>;
|
||||
opp-microvolt = <1320000>;
|
||||
clock-latency-ns = <244144>; /* 8 32k periods */
|
||||
};
|
||||
|
||||
opp-1200000000 {
|
||||
opp-hz = /bits/ 64 <1200000000>;
|
||||
opp-microvolt = <1320000>;
|
||||
clock-latency-ns = <244144>; /* 8 32k periods */
|
||||
};
|
||||
};
|
||||
|
||||
&de {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dai {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -123,8 +144,7 @@
|
|||
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>;
|
||||
vmmc-supply = <®_dcdc1>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
|
||||
cd-inverted;
|
||||
cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
@ -140,9 +160,9 @@
|
|||
|
||||
&mmc2_8bit_pins {
|
||||
/* Increase drive strength for DDR modes */
|
||||
allwinner,drive = <SUN4I_PINCTRL_40_MA>;
|
||||
drive-strength = <40>;
|
||||
/* eMMC is missing pull-ups */
|
||||
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
|
|
@ -151,10 +171,9 @@
|
|||
|
||||
&pio {
|
||||
mmc0_cd_pin_sina33: mmc0_cd_pin@0 {
|
||||
allwinner,pins = "PB4";
|
||||
allwinner,function = "gpio_in";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
||||
pins = "PB4";
|
||||
function = "gpio_in";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -170,7 +189,15 @@
|
|||
};
|
||||
};
|
||||
|
||||
#include "axp22x.dtsi"
|
||||
#include "axp223.dtsi"
|
||||
|
||||
&ac_power_supply {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&battery_power_supply {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
®_aldo1 {
|
||||
regulator-always-on;
|
||||
|
|
@ -232,6 +259,10 @@
|
|||
regulator-name = "vcc-rtc";
|
||||
};
|
||||
|
||||
&sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcon0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcd_rgb666_pins>;
|
||||
|
|
|
|||
|
|
@ -203,8 +203,8 @@
|
|||
};
|
||||
};
|
||||
|
||||
soc@01c00000 {
|
||||
tcon0: lcd-controller@01c0c000 {
|
||||
soc@1c00000 {
|
||||
tcon0: lcd-controller@1c0c000 {
|
||||
compatible = "allwinner,sun8i-a33-tcon";
|
||||
reg = <0x01c0c000 0x1000>;
|
||||
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -236,11 +236,16 @@
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
|
||||
tcon0_out_dsi: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&dsi_in_tcon0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
crypto: crypto-engine@01c15000 {
|
||||
crypto: crypto-engine@1c15000 {
|
||||
compatible = "allwinner,sun4i-a10-crypto";
|
||||
reg = <0x01c15000 0x1000>;
|
||||
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -250,7 +255,7 @@
|
|||
reset-names = "ahb";
|
||||
};
|
||||
|
||||
dai: dai@01c22c00 {
|
||||
dai: dai@1c22c00 {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "allwinner,sun6i-a31-i2s";
|
||||
reg = <0x01c22c00 0x200>;
|
||||
|
|
@ -263,7 +268,7 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
codec: codec@01c22e00 {
|
||||
codec: codec@1c22e00 {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "allwinner,sun8i-a33-codec";
|
||||
reg = <0x01c22e00 0x400>;
|
||||
|
|
@ -273,14 +278,53 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
ths: ths@01c25000 {
|
||||
ths: ths@1c25000 {
|
||||
compatible = "allwinner,sun8i-a33-ths";
|
||||
reg = <0x01c25000 0x100>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
#io-channel-cells = <0>;
|
||||
};
|
||||
|
||||
fe0: display-frontend@01e00000 {
|
||||
dsi: dsi@1ca0000 {
|
||||
compatible = "allwinner,sun6i-a31-mipi-dsi";
|
||||
reg = <0x01ca0000 0x1000>;
|
||||
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&ccu CLK_BUS_MIPI_DSI>,
|
||||
<&ccu CLK_DSI_SCLK>;
|
||||
clock-names = "bus", "mod";
|
||||
resets = <&ccu RST_BUS_MIPI_DSI>;
|
||||
phys = <&dphy>;
|
||||
phy-names = "dphy";
|
||||
status = "disabled";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
|
||||
dsi_in_tcon0: endpoint {
|
||||
remote-endpoint = <&tcon0_out_dsi>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
dphy: d-phy@1ca1000 {
|
||||
compatible = "allwinner,sun6i-a31-mipi-dphy";
|
||||
reg = <0x01ca1000 0x1000>;
|
||||
clocks = <&ccu CLK_BUS_MIPI_DSI>,
|
||||
<&ccu CLK_DSI_DPHY>;
|
||||
clock-names = "bus", "mod";
|
||||
resets = <&ccu RST_BUS_MIPI_DSI>;
|
||||
status = "disabled";
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
fe0: display-frontend@1e00000 {
|
||||
compatible = "allwinner,sun8i-a33-display-frontend";
|
||||
reg = <0x01e00000 0x20000>;
|
||||
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -289,7 +333,6 @@
|
|||
clock-names = "ahb", "mod",
|
||||
"ram";
|
||||
resets = <&ccu RST_BUS_DE_FE>;
|
||||
status = "disabled";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
|
|
@ -308,7 +351,7 @@
|
|||
};
|
||||
};
|
||||
|
||||
be0: display-backend@01e60000 {
|
||||
be0: display-backend@1e60000 {
|
||||
compatible = "allwinner,sun8i-a33-display-backend";
|
||||
reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
|
||||
reg-names = "be", "sat";
|
||||
|
|
@ -350,7 +393,7 @@
|
|||
};
|
||||
};
|
||||
|
||||
drc0: drc@01e70000 {
|
||||
drc0: drc@1e70000 {
|
||||
compatible = "allwinner,sun8i-a33-drc";
|
||||
reg = <0x01e70000 0x10000>;
|
||||
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
|
|||
|
|
@ -49,13 +49,6 @@
|
|||
ethernet0 = &sdio_wifi;
|
||||
};
|
||||
|
||||
q8_hardwaremgr {
|
||||
compatible = "allwinner,sunxi-q8-hardwaremgr";
|
||||
touchscreen-i2c-bus = <&i2c0>;
|
||||
touchscreen-supply = <®_ldo_io1>;
|
||||
touchscreen-power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
|
||||
};
|
||||
|
||||
wifi_pwrseq: wifi_pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
/*
|
||||
|
|
@ -90,32 +83,17 @@
|
|||
};
|
||||
|
||||
&mmc1_pins_a {
|
||||
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
&r_pio {
|
||||
wifi_pwrseq_pin_q8: wifi_pwrseq_pin@0 {
|
||||
allwinner,pins = "PL6", "PL7", "PL11";
|
||||
allwinner,function = "gpio_in";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
||||
pins = "PL6", "PL7", "PL11";
|
||||
function = "gpio_in";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
usb1_vbus-supply = <®_dldo1>;
|
||||
};
|
||||
|
||||
&gsl1680 {
|
||||
touchscreen-size-x = <1024>;
|
||||
touchscreen-size-y = <600>;
|
||||
touchscreen-fw-name = "silead/gsl1680-q8-700.fw";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
®_ldo_io1 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-touchscreen";
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -150,8 +150,7 @@
|
|||
pinctrl-0 = <&mmc0_pins_a>;
|
||||
vmmc-supply = <®_dcdc1>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
|
||||
cd-inverted;
|
||||
cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -63,8 +63,6 @@
|
|||
};
|
||||
|
||||
&nfc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
|
||||
status = "okay";
|
||||
|
||||
nand@0 {
|
||||
|
|
|
|||
|
|
@ -84,6 +84,14 @@
|
|||
|
||||
};
|
||||
|
||||
&codec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dai {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -149,8 +157,8 @@
|
|||
};
|
||||
|
||||
&mmc2_8bit_pins {
|
||||
allwinner,drive = <SUN4I_PINCTRL_40_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
||||
drive-strength = <40>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
|
|
@ -159,40 +167,32 @@
|
|||
|
||||
&pio {
|
||||
mmc0_cd_pin_parrot: mmc0_cd_pin@0 {
|
||||
allwinner,pins = "PD14";
|
||||
allwinner,function = "gpio_in";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
||||
pins = "PD14";
|
||||
function = "gpio_in";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
led_pins_parrot: led_pins@0 {
|
||||
allwinner,pins = "PE16", "PE17";
|
||||
allwinner,function = "gpio_out";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
pins = "PE16", "PE17";
|
||||
function = "gpio_out";
|
||||
};
|
||||
|
||||
usb0_id_det: usb0_id_detect_pin@0 {
|
||||
allwinner,pins = "PD10";
|
||||
allwinner,function = "gpio_in";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
||||
pins = "PD10";
|
||||
function = "gpio_in";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
usb1_vbus_pin_parrot: usb1_vbus_pin@0 {
|
||||
allwinner,pins = "PD12";
|
||||
allwinner,function = "gpio_out";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
pins = "PD12";
|
||||
function = "gpio_out";
|
||||
};
|
||||
};
|
||||
|
||||
&r_pio {
|
||||
wifi_reset_pin_parrot: wifi_reset_pin@0 {
|
||||
allwinner,pins = "PL6";
|
||||
allwinner,function = "gpio_out";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
pins = "PL6";
|
||||
function = "gpio_out";
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -209,7 +209,7 @@
|
|||
};
|
||||
};
|
||||
|
||||
#include "axp22x.dtsi"
|
||||
#include "axp223.dtsi"
|
||||
|
||||
®_aldo1 {
|
||||
regulator-always-on;
|
||||
|
|
@ -325,6 +325,10 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins_b>;
|
||||
|
|
|
|||
|
|
@ -50,8 +50,6 @@
|
|||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bl_en_pin>;
|
||||
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
|
||||
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
|
||||
default-brightness-level = <8>;
|
||||
|
|
@ -71,15 +69,13 @@
|
|||
*/
|
||||
clock-frequency = <400000>;
|
||||
|
||||
gsl1680: touchscreen@40 {
|
||||
compatible = "silead,gsl1680";
|
||||
reg = <0x40>;
|
||||
touchscreen: touchscreen@0 {
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ts_power_pin>;
|
||||
power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
|
||||
/* Most tablets use this touchscreen, but not all */
|
||||
/* Tablet dts must provide reg and compatible */
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
@ -89,38 +85,26 @@
|
|||
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
|
||||
vmmc-supply = <®_dcdc1>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
|
||||
cd-inverted;
|
||||
cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
bl_en_pin: bl_en_pin@0 {
|
||||
allwinner,pins = "PH6";
|
||||
allwinner,function = "gpio_in";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
};
|
||||
|
||||
mmc0_cd_pin: mmc0_cd_pin@0 {
|
||||
allwinner,pins = "PB4";
|
||||
allwinner,function = "gpio_in";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
||||
pins = "PB4";
|
||||
function = "gpio_in";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
ts_power_pin: ts_power_pin@0 {
|
||||
allwinner,pins = "PH1";
|
||||
allwinner,function = "gpio_out";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
pins = "PH1";
|
||||
function = "gpio_out";
|
||||
};
|
||||
|
||||
usb0_id_detect_pin: usb0_id_detect_pin@0 {
|
||||
allwinner,pins = "PH8";
|
||||
allwinner,function = "gpio_in";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
||||
pins = "PH8";
|
||||
function = "gpio_in";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -138,7 +122,15 @@
|
|||
};
|
||||
};
|
||||
|
||||
#include "axp22x.dtsi"
|
||||
#include "axp223.dtsi"
|
||||
|
||||
&ac_power_supply {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&battery_power_supply {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
®_aldo1 {
|
||||
regulator-always-on;
|
||||
|
|
@ -211,10 +203,21 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
®_ldo_io1 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-touchscreen";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
®_rtc_ldo {
|
||||
regulator-name = "vcc-rtc";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <®_dcdc2>;
|
||||
};
|
||||
|
||||
&r_uart {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&r_uart_pins_a>;
|
||||
|
|
|
|||
Loading…
Add table
Reference in a new issue