dm: usb: exynos: Add driver model support to exynos EHCI

Update this driver with driver model support for USB.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>

drivers/usb/host/ehci-exynos.c

@@ -8,6 +8,7 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <fdtdec.h>
 #include <libfdt.h>
 #include <malloc.h>
@@ -24,19 +25,73 @@
 /* Declare global data pointer */
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_DM_USB
+struct exynos_ehci_platdata {
+	struct usb_platdata usb_plat;
+	fdt_addr_t hcd_base;
+	fdt_addr_t phy_base;
+	struct gpio_desc vbus_gpio;
+};
+#endif
+
 /**
  * Contains pointers to register base addresses
  * for the usb controller.
  */
 struct exynos_ehci {
+	struct ehci_ctrl ctrl;
 	struct exynos_usb_phy *usb;
 	struct ehci_hccr *hcd;
+#ifndef CONFIG_DM_USB
 	struct gpio_desc vbus_gpio;
+#endif
 };
 
+#ifndef CONFIG_DM_USB
 static struct exynos_ehci exynos;
+#endif
 
-#ifdef CONFIG_OF_CONTROL
+#ifdef CONFIG_DM_USB
+static int ehci_usb_ofdata_to_platdata(struct udevice *dev)
+{
+	struct exynos_ehci_platdata *plat = dev_get_platdata(dev);
+	const void *blob = gd->fdt_blob;
+	unsigned int node;
+	int depth;
+
+	/*
+	 * Get the base address for XHCI controller from the device node
+	 */
+	plat->hcd_base = dev_get_addr(dev);
+	if (plat->hcd_base == FDT_ADDR_T_NONE) {
+		debug("Can't get the XHCI register base address\n");
+		return -ENXIO;
+	}
+
+	depth = 0;
+	node = fdtdec_next_compatible_subnode(blob, dev->of_offset,
+				COMPAT_SAMSUNG_EXYNOS_USB_PHY, &depth);
+	if (node <= 0) {
+		debug("XHCI: Can't get device node for usb3-phy controller\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Get the base address for usbphy from the device node
+	 */
+	plat->phy_base = fdtdec_get_addr(blob, node, "reg");
+	if (plat->phy_base == FDT_ADDR_T_NONE) {
+		debug("Can't get the usbphy register address\n");
+		return -ENXIO;
+	}
+
+	/* Vbus gpio */
+	gpio_request_by_name(dev, "samsung,vbus-gpio", 0,
+			     &plat->vbus_gpio, GPIOD_IS_OUT);
+
+	return 0;
+}
+#else
 static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos)
 {
 	fdt_addr_t addr;
@@ -215,6 +270,7 @@ static void reset_usb_phy(struct exynos_usb_phy *usb)
 	set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE);
 }
 
+#ifndef CONFIG_DM_USB
 /*
  * EHCI-initialization
  * Create the appropriate control structures to manage
@@ -268,3 +324,57 @@ int ehci_hcd_stop(int index)
 
 	return 0;
 }
+#endif
+
+#ifdef CONFIG_DM_USB
+static int ehci_usb_probe(struct udevice *dev)
+{
+	struct exynos_ehci_platdata *plat = dev_get_platdata(dev);
+	struct exynos_ehci *ctx = dev_get_priv(dev);
+	struct ehci_hcor *hcor;
+
+	ctx->hcd = (struct ehci_hccr *)plat->hcd_base;
+	ctx->usb = (struct exynos_usb_phy *)plat->phy_base;
+	hcor = (struct ehci_hcor *)((uint32_t)ctx->hcd +
+			HC_LENGTH(ehci_readl(&ctx->hcd->cr_capbase)));
+
+	/* setup the Vbus gpio here */
+	if (dm_gpio_is_valid(&plat->vbus_gpio))
+		dm_gpio_set_value(&plat->vbus_gpio, 1);
+
+	setup_usb_phy(ctx->usb);
+
+	return ehci_register(dev, ctx->hcd, hcor, NULL, 0, USB_INIT_HOST);
+}
+
+static int ehci_usb_remove(struct udevice *dev)
+{
+	struct exynos_ehci *ctx = dev_get_priv(dev);
+	int ret;
+
+	ret = ehci_deregister(dev);
+	if (ret)
+		return ret;
+	reset_usb_phy(ctx->usb);
+
+	return 0;
+}
+
+static const struct udevice_id ehci_usb_ids[] = {
+	{ .compatible = "samsung,exynos-ehci" },
+	{ }
+};
+
+U_BOOT_DRIVER(usb_ehci) = {
+	.name	= "ehci_exynos",
+	.id	= UCLASS_USB,
+	.of_match = ehci_usb_ids,
+	.ofdata_to_platdata = ehci_usb_ofdata_to_platdata,
+	.probe = ehci_usb_probe,
+	.remove = ehci_usb_remove,
+	.ops	= &ehci_usb_ops,
+	.priv_auto_alloc_size = sizeof(struct exynos_ehci),
+	.platdata_auto_alloc_size = sizeof(struct exynos_ehci_platdata),
+	.flags	= DM_FLAG_ALLOC_PRIV_DMA,
+};
+#endif