diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 277c3babf3..ddcee1bbe0 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -558,6 +558,40 @@ config VGA_BIOS_ADDR
 	  address of 0xfff90000 indicates that the image will be put at offset
 	  0x90000 from the beginning of a 1MB flash device.
 
+config HAVE_VBT
+	bool "Add a Video BIOS Table (VBT) image"
+	depends on HAVE_FSP
+	help
+	  Select this option if you have a Video BIOS Table (VBT) image that
+	  you would like to add to your ROM. This is normally required if you
+	  are using an Intel FSP firmware that is complaint with spec 1.1 or
+	  later to initialize the integrated graphics device (IGD).
+
+	  Video BIOS Table, or VBT, provides platform and board specific
+	  configuration information to the driver that is not discoverable
+	  or available through other means. By other means the most used
+	  method here is to read EDID table from the attached monitor, over
+	  Display Data Channel (DDC) using two pin I2C serial interface. VBT
+	  configuration is related to display hardware and is available via
+	  the ACPI OpRegion or, on older systems, in the PCI ROM (Option ROM).
+
+config VBT_FILE
+	string "Video BIOS Table (VBT) image filename"
+	depends on HAVE_VBT
+	default "vbt.bin"
+	help
+	  The filename of the file to use as Video BIOS Table (VBT) image
+	  in the board directory.
+
+config VBT_ADDR
+	hex "Video BIOS Table (VBT) image location"
+	depends on HAVE_VBT
+	default 0xfff90000
+	help
+	  The location of Video BIOS Table (VBT) image in the SPI flash. For
+	  example, base address of 0xfff90000 indicates that the image will
+	  be put at offset 0x90000 from the beginning of a 1MB flash device.
+
 config ROM_TABLE_ADDR
 	hex
 	default 0xf0000