Merge remote branch 'origin/master' into next

This commit is contained in:
Wolfgang Denk 2010-03-21 22:45:36 +01:00
commit b46b353b90
43 changed files with 65 additions and 35 deletions

19
README
View file

@ -3005,7 +3005,9 @@ environment. As long as you don't save the environment you are
working with an in-memory copy. In case the Flash area containing the working with an in-memory copy. In case the Flash area containing the
environment is erased by accident, a default environment is provided. environment is erased by accident, a default environment is provided.
Some configuration options can be set using Environment Variables: Some configuration options can be set using Environment Variables.
List of environment variables (most likely not complete):
baudrate - see CONFIG_BAUDRATE baudrate - see CONFIG_BAUDRATE
@ -3117,7 +3119,7 @@ Some configuration options can be set using Environment Variables:
available network interfaces. available network interfaces.
It just stays at the currently selected interface. It just stays at the currently selected interface.
netretry - When set to "no" each network operation will netretry - When set to "no" each network operation will
either succeed or fail without retrying. either succeed or fail without retrying.
When set to "once" the network operation will When set to "once" the network operation will
fail when all the available network interfaces fail when all the available network interfaces
@ -3133,7 +3135,18 @@ Some configuration options can be set using Environment Variables:
tftpdstport - If this is set, the value is used for TFTP's UDP tftpdstport - If this is set, the value is used for TFTP's UDP
destination port instead of the Well Know Port 69. destination port instead of the Well Know Port 69.
vlan - When set to a value < 4095 the traffic over tftpblocksize - Block size to use for TFTP transfers; if not set,
we use the TFTP server's default block size
tftptimeout - Retransmission timeout for TFTP packets (in milli-
seconds, minimum value is 1000 = 1 second). Defines
when a packet is considered to be lost so it has to
be retransmitted. The default is 5000 = 5 seconds.
Lowering this value may make downloads succeed
faster in networks with high packet loss rates or
with unreliable TFTP servers.
vlan - When set to a value < 4095 the traffic over
Ethernet is encapsulated/received over 802.1q Ethernet is encapsulated/received over 802.1q
VLAN tagged frames. VLAN tagged frames.

0
board/spear/common/spr_lowlevel_init.S Executable file → Normal file
View file

0
board/spear/common/spr_misc.c Executable file → Normal file
View file

0
board/spear/spear300/Makefile Executable file → Normal file
View file

0
board/spear/spear300/config.mk Executable file → Normal file
View file

0
board/spear/spear300/spear300.c Executable file → Normal file
View file

0
board/spear/spear310/Makefile Executable file → Normal file
View file

0
board/spear/spear310/config.mk Executable file → Normal file
View file

0
board/spear/spear310/spear310.c Executable file → Normal file
View file

0
board/spear/spear320/Makefile Executable file → Normal file
View file

0
board/spear/spear320/config.mk Executable file → Normal file
View file

0
board/spear/spear320/spear320.c Executable file → Normal file
View file

0
board/spear/spear600/Makefile Executable file → Normal file
View file

0
board/spear/spear600/config.mk Executable file → Normal file
View file

0
board/spear/spear600/spear600.c Executable file → Normal file
View file

View file

@ -136,7 +136,7 @@ int do_mmcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD(mmcinfo, 2, 0, do_mmcinfo, U_BOOT_CMD(mmcinfo, 2, 0, do_mmcinfo,
"mmcinfo <dev num>-- display MMC info\n", "mmcinfo <dev num>-- display MMC info",
"" ""
); );

View file

@ -659,10 +659,14 @@ int console_init_r(void)
#ifdef CONFIG_SPLASH_SCREEN #ifdef CONFIG_SPLASH_SCREEN
/* /*
* suppress all output if splash screen is enabled and we have * suppress all output if splash screen is enabled and we have
* a bmp to display * a bmp to display. We redirect the output from frame buffer
* console to serial console in this case or suppress it if
* "silent" mode was requested.
*/ */
if (getenv("splashimage") != NULL) if (getenv("splashimage") != NULL) {
gd->flags |= GD_FLG_SILENT; if (!(gd->flags & GD_FLG_SILENT))
outputdev = search_device (DEV_FLAGS_OUTPUT, "serial");
}
#endif #endif
/* Scan devices looking for input and output devices */ /* Scan devices looking for input and output devices */

0
cpu/arm926ejs/spear/Makefile Executable file → Normal file
View file

0
cpu/arm926ejs/spear/reset.c Executable file → Normal file
View file

0
cpu/arm926ejs/spear/timer.c Executable file → Normal file
View file

0
cpu/arm926ejs/versatile/timer.c Executable file → Normal file
View file

View file

@ -145,10 +145,10 @@ void *video_hw_init(void)
struct fb_info *info; struct fb_info *info;
if (mpc5121_diu_init() < 0) if (mpc5121_diu_init() < 0)
return; return NULL;
/* fill in Graphic device struct */ /* fill in Graphic device struct */
sprintf(pGD->modeIdent, "%dx%dx%d %ldkHz %ldHz", sprintf(pGD->modeIdent, "%dx%dx%d %dkHz %dHz",
xres, yres, 32, 64, 60); xres, yres, 32, 64, 60);
pGD->frameAdrs = (unsigned int)fsl_fb_open(&info); pGD->frameAdrs = (unsigned int)fsl_fb_open(&info);

0
drivers/i2c/Makefile Executable file → Normal file
View file

0
drivers/i2c/spr_i2c.c Executable file → Normal file
View file

View file

@ -136,14 +136,14 @@ static void mxcmci_softreset(struct mxcmci_host *host)
int i; int i;
/* reset sequence */ /* reset sequence */
writew(STR_STP_CLK_RESET, &host->base->str_stp_clk); writel(STR_STP_CLK_RESET, &host->base->str_stp_clk);
writew(STR_STP_CLK_RESET | STR_STP_CLK_START_CLK, writel(STR_STP_CLK_RESET | STR_STP_CLK_START_CLK,
&host->base->str_stp_clk); &host->base->str_stp_clk);
for (i = 0; i < 8; i++) for (i = 0; i < 8; i++)
writew(STR_STP_CLK_START_CLK, &host->base->str_stp_clk); writel(STR_STP_CLK_START_CLK, &host->base->str_stp_clk);
writew(0xff, &host->base->res_to); writel(0xff, &host->base->res_to);
} }
static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data) static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
@ -154,8 +154,8 @@ static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
host->data = data; host->data = data;
writew(nob, &host->base->nob); writel(nob, &host->base->nob);
writew(blksz, &host->base->blk_len); writel(blksz, &host->base->blk_len);
host->datasize = datasize; host->datasize = datasize;
} }
@ -185,9 +185,9 @@ static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_cmd *cmd,
return -EINVAL; return -EINVAL;
} }
writew(cmd->cmdidx, &host->base->cmd); writel(cmd->cmdidx, &host->base->cmd);
writel(cmd->cmdarg, &host->base->arg); writel(cmd->cmdarg, &host->base->arg);
writew(cmdat, &host->base->cmd_dat_cont); writel(cmdat, &host->base->cmd_dat_cont);
return 0; return 0;
} }
@ -247,14 +247,14 @@ static int mxcmci_read_response(struct mxcmci_host *host, unsigned int stat)
if (cmd->resp_type & MMC_RSP_PRESENT) { if (cmd->resp_type & MMC_RSP_PRESENT) {
if (cmd->resp_type & MMC_RSP_136) { if (cmd->resp_type & MMC_RSP_136) {
for (i = 0; i < 4; i++) { for (i = 0; i < 4; i++) {
a = readw(&host->base->res_fifo); a = readl(&host->base->res_fifo) & 0xFFFF;
b = readw(&host->base->res_fifo); b = readl(&host->base->res_fifo) & 0xFFFF;
resp[i] = a << 16 | b; resp[i] = a << 16 | b;
} }
} else { } else {
a = readw(&host->base->res_fifo); a = readl(&host->base->res_fifo) & 0xFFFF;
b = readw(&host->base->res_fifo); b = readl(&host->base->res_fifo) & 0xFFFF;
c = readw(&host->base->res_fifo); c = readl(&host->base->res_fifo) & 0xFFFF;
resp[0] = a << 24 | b << 8 | c >> 8; resp[0] = a << 24 | b << 8 | c >> 8;
} }
} }
@ -445,7 +445,7 @@ static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios)
prescaler <<= 1; prescaler <<= 1;
} }
writew((prescaler << 4) | divider, &host->base->clk_rate); writel((prescaler << 4) | divider, &host->base->clk_rate);
} }
static void mxcmci_set_ios(struct mmc *mmc) static void mxcmci_set_ios(struct mmc *mmc)
@ -458,9 +458,9 @@ static void mxcmci_set_ios(struct mmc *mmc)
if (mmc->clock) { if (mmc->clock) {
mxcmci_set_clk_rate(host, mmc->clock); mxcmci_set_clk_rate(host, mmc->clock);
writew(STR_STP_CLK_START_CLK, &host->base->str_stp_clk); writel(STR_STP_CLK_START_CLK, &host->base->str_stp_clk);
} else { } else {
writew(STR_STP_CLK_STOP_CLK, &host->base->str_stp_clk); writel(STR_STP_CLK_STOP_CLK, &host->base->str_stp_clk);
} }
host->clock = mmc->clock; host->clock = mmc->clock;
@ -472,7 +472,7 @@ static int mxcmci_init(struct mmc *mmc)
mxcmci_softreset(host); mxcmci_softreset(host);
host->rev_no = readw(&host->base->rev_no); host->rev_no = readl(&host->base->rev_no);
if (host->rev_no != 0x400) { if (host->rev_no != 0x400) {
printf("wrong rev.no. 0x%08x. aborting.\n", printf("wrong rev.no. 0x%08x. aborting.\n",
host->rev_no); host->rev_no);
@ -480,7 +480,7 @@ static int mxcmci_init(struct mmc *mmc)
} }
/* recommended in data sheet */ /* recommended in data sheet */
writew(0x2db4, &host->base->read_to); writel(0x2db4, &host->base->read_to);
writel(0, &host->base->int_cntr); writel(0, &host->base->int_cntr);

0
drivers/mtd/Makefile Executable file → Normal file
View file

0
drivers/mtd/nand/spr_nand.c Executable file → Normal file
View file

0
drivers/mtd/spr_smi.c Executable file → Normal file
View file

View file

@ -388,7 +388,7 @@ int pci_hose_config_device(struct pci_controller *hose,
pci_hose_write_config_dword (hose, dev, PCI_COMMAND, 0); pci_hose_write_config_dword (hose, dev, PCI_COMMAND, 0);
for (bar = PCI_BASE_ADDRESS_0; bar < PCI_BASE_ADDRESS_5; bar += 4) { for (bar = PCI_BASE_ADDRESS_0; bar <= PCI_BASE_ADDRESS_5; bar += 4) {
pci_hose_write_config_dword (hose, dev, bar, 0xffffffff); pci_hose_write_config_dword (hose, dev, bar, 0xffffffff);
pci_hose_read_config_dword (hose, dev, bar, &bar_response); pci_hose_read_config_dword (hose, dev, bar, &bar_response);

0
drivers/serial/usbtty.h Executable file → Normal file
View file

0
drivers/usb/gadget/Makefile Executable file → Normal file
View file

0
drivers/usb/gadget/spr_udc.c Executable file → Normal file
View file

View file

@ -80,7 +80,7 @@ typedef struct at91_matrix {
u32 mrcr; /* 0x100 Master Remap Control */ u32 mrcr; /* 0x100 Master Remap Control */
u32 reserve4[3]; u32 reserve4[3];
#if defined(CONFIG_AT91SAM9G45) #if defined(CONFIG_AT91SAM9G45)
u32 ccr[52] /* 0x110 - 0x1E0 Chip Configuration */ u32 ccr[52]; /* 0x110 - 0x1E0 Chip Configuration */
u32 womr; /* 0x1E4 Write Protect Mode */ u32 womr; /* 0x1E4 Write Protect Mode */
u32 wpsr; /* 0x1E8 Write Protect Status */ u32 wpsr; /* 0x1E8 Write Protect Status */
u32 resg45_1[10]; u32 resg45_1[10];

0
include/asm-arm/arch-spear/spr_gpt.h Executable file → Normal file
View file

0
include/asm-arm/arch-spear/spr_i2c.h Executable file → Normal file
View file

0
include/asm-arm/arch-spear/spr_smi.h Executable file → Normal file
View file

0
include/asm-arm/arch-spear/spr_xloader_table.h Executable file → Normal file
View file

0
include/configs/spear3xx.h Executable file → Normal file
View file

0
include/configs/spear6xx.h Executable file → Normal file
View file

0
include/usb/spr_udc.h Executable file → Normal file
View file

View file

@ -163,7 +163,7 @@ const uint32_t * ZEXPORT get_crc_table()
#endif #endif
/* ========================================================================= */ /* ========================================================================= */
# ifdef __LITTLE_ENDIAN # if __BYTE_ORDER == __LITTLE_ENDIAN
# define DO_CRC(x) crc = tab[(crc ^ (x)) & 255] ^ (crc >> 8) # define DO_CRC(x) crc = tab[(crc ^ (x)) & 255] ^ (crc >> 8)
# else # else
# define DO_CRC(x) crc = tab[((crc >> 24) ^ (x)) & 255] ^ (crc << 8) # define DO_CRC(x) crc = tab[((crc >> 24) ^ (x)) & 255] ^ (crc << 8)

0
lib_m68k/bootm.c Executable file → Normal file
View file

View file

@ -211,7 +211,7 @@ TftpSend (void)
pkt += 5 /*strlen("octet")*/ + 1; pkt += 5 /*strlen("octet")*/ + 1;
strcpy ((char *)pkt, "timeout"); strcpy ((char *)pkt, "timeout");
pkt += 7 /*strlen("timeout")*/ + 1; pkt += 7 /*strlen("timeout")*/ + 1;
sprintf((char *)pkt, "%lu", TIMEOUT / 1000); sprintf((char *)pkt, "%lu", TftpTimeoutMSecs / 1000);
debug("send option \"timeout %s\"\n", (char *)pkt); debug("send option \"timeout %s\"\n", (char *)pkt);
pkt += strlen((char *)pkt) + 1; pkt += strlen((char *)pkt) + 1;
#ifdef CONFIG_TFTP_TSIZE #ifdef CONFIG_TFTP_TSIZE
@ -413,7 +413,6 @@ TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len)
} }
TftpLastBlock = TftpBlock; TftpLastBlock = TftpBlock;
TftpTimeoutMSecs = TIMEOUT;
TftpTimeoutCountMax = TIMEOUT_COUNT; TftpTimeoutCountMax = TIMEOUT_COUNT;
NetSetTimeout (TftpTimeoutMSecs, TftpTimeout); NetSetTimeout (TftpTimeoutMSecs, TftpTimeout);
@ -528,10 +527,25 @@ TftpStart (void)
{ {
char *ep; /* Environment pointer */ char *ep; /* Environment pointer */
/* Allow the user to choose tftpblocksize */ /*
* Allow the user to choose TFTP blocksize and timeout.
* TFTP protocol has a minimal timeout of 1 second.
*/
if ((ep = getenv("tftpblocksize")) != NULL) if ((ep = getenv("tftpblocksize")) != NULL)
TftpBlkSizeOption = simple_strtol(ep, NULL, 10); TftpBlkSizeOption = simple_strtol(ep, NULL, 10);
debug("tftp block size is %i\n", TftpBlkSizeOption);
if ((ep = getenv("tftptimeout")) != NULL)
TftpTimeoutMSecs = simple_strtol(ep, NULL, 10);
if (TftpTimeoutMSecs < 1000) {
printf("TFTP timeout (%ld ms) too low, "
"set minimum = 1000 ms\n",
TftpTimeoutMSecs);
TftpTimeoutMSecs = 1000;
}
debug("TFTP blocksize = %i, timeout = %ld ms\n",
TftpBlkSizeOption, TftpTimeoutMSecs);
TftpServerIP = NetServerIP; TftpServerIP = NetServerIP;
if (BootFile[0] == '\0') { if (BootFile[0] == '\0') {
@ -588,7 +602,6 @@ TftpStart (void)
puts ("Loading: *\b"); puts ("Loading: *\b");
TftpTimeoutMSecs = TftpRRQTimeoutMSecs;
TftpTimeoutCountMax = TftpRRQTimeoutCountMax; TftpTimeoutCountMax = TftpRRQTimeoutCountMax;
NetSetTimeout (TftpTimeoutMSecs, TftpTimeout); NetSetTimeout (TftpTimeoutMSecs, TftpTimeout);