mirror of
https://github.com/Fishwaldo/u-boot.git
synced 2025-04-03 13:01:31 +00:00
usb: dwc2: convert driver to DM_USB_GADGET
Minimal conversion to driver model by using the uclass UCLASS_USB_GADGET_GENERIC based on: - reset uclass - clock uclass - generic uclass. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
This commit is contained in:
parent
a812d77617
commit
c791c8431c
2 changed files with 344 additions and 2 deletions
54
doc/device-tree-bindings/usb/dwc2.txt
Normal file
54
doc/device-tree-bindings/usb/dwc2.txt
Normal file
|
@ -0,0 +1,54 @@
|
||||||
|
Platform DesignWare HS OTG USB 2.0 controller
|
||||||
|
-----------------------------------------------------
|
||||||
|
|
||||||
|
Required properties:
|
||||||
|
- compatible : One of:
|
||||||
|
- brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC.
|
||||||
|
- hisilicon,hi6220-usb: The DWC2 USB controller instance in the hi6220 SoC.
|
||||||
|
- rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc;
|
||||||
|
- "rockchip,px30-usb", "rockchip,rk3066-usb", "snps,dwc2": for px30 Soc;
|
||||||
|
- "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc;
|
||||||
|
- "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
|
||||||
|
- "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
|
||||||
|
- "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
|
||||||
|
- "amlogic,meson8-usb": The DWC2 USB controller instance in Amlogic Meson8 SoCs;
|
||||||
|
- "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
|
||||||
|
- "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
|
||||||
|
- "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;
|
||||||
|
- snps,dwc2: A generic DWC2 USB controller with default parameters.
|
||||||
|
- "st,stm32f4x9-fsotg": The DWC2 USB FS/HS controller instance in STM32F4x9 SoCs
|
||||||
|
configured in FS mode;
|
||||||
|
- "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs
|
||||||
|
configured in HS mode;
|
||||||
|
- "st,stm32f7-hsotg": The DWC2 USB HS controller instance in STM32F7 SoCs
|
||||||
|
configured in HS mode;
|
||||||
|
- reg : Should contain 1 register range (address and length)
|
||||||
|
- interrupts : Should contain 1 interrupt
|
||||||
|
- clocks: clock provider specifier
|
||||||
|
- clock-names: shall be "otg"
|
||||||
|
Refer to clk/clock-bindings.txt for generic clock consumer properties
|
||||||
|
|
||||||
|
Optional properties:
|
||||||
|
- phys: phy provider specifier
|
||||||
|
- phy-names: shall be "usb2-phy"
|
||||||
|
Refer to phy/phy-bindings.txt for generic phy consumer properties
|
||||||
|
- dr_mode: shall be one of "host", "peripheral" and "otg"
|
||||||
|
Refer to usb/generic.txt
|
||||||
|
- g-rx-fifo-size: size of rx fifo size in gadget mode.
|
||||||
|
- g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
|
||||||
|
- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
|
||||||
|
|
||||||
|
Deprecated properties:
|
||||||
|
- g-use-dma: gadget DMA mode is automatically detected
|
||||||
|
|
||||||
|
Example:
|
||||||
|
|
||||||
|
usb@101c0000 {
|
||||||
|
compatible = "ralink,rt3050-usb, snps,dwc2";
|
||||||
|
reg = <0x101c0000 40000>;
|
||||||
|
interrupts = <18>;
|
||||||
|
clocks = <&usb_otg_ahb_clk>;
|
||||||
|
clock-names = "otg";
|
||||||
|
phys = <&usbphy>;
|
||||||
|
phy-names = "usb2-phy";
|
||||||
|
};
|
|
@ -18,11 +18,17 @@
|
||||||
*/
|
*/
|
||||||
#undef DEBUG
|
#undef DEBUG
|
||||||
#include <common.h>
|
#include <common.h>
|
||||||
|
#include <clk.h>
|
||||||
|
#include <dm.h>
|
||||||
|
#include <generic-phy.h>
|
||||||
|
#include <malloc.h>
|
||||||
|
#include <reset.h>
|
||||||
|
|
||||||
#include <linux/errno.h>
|
#include <linux/errno.h>
|
||||||
#include <linux/list.h>
|
#include <linux/list.h>
|
||||||
#include <malloc.h>
|
|
||||||
|
|
||||||
#include <linux/usb/ch9.h>
|
#include <linux/usb/ch9.h>
|
||||||
|
#include <linux/usb/otg.h>
|
||||||
#include <linux/usb/gadget.h>
|
#include <linux/usb/gadget.h>
|
||||||
|
|
||||||
#include <asm/byteorder.h>
|
#include <asm/byteorder.h>
|
||||||
|
@ -31,6 +37,8 @@
|
||||||
|
|
||||||
#include <asm/mach-types.h>
|
#include <asm/mach-types.h>
|
||||||
|
|
||||||
|
#include <power/regulator.h>
|
||||||
|
|
||||||
#include "dwc2_udc_otg_regs.h"
|
#include "dwc2_udc_otg_regs.h"
|
||||||
#include "dwc2_udc_otg_priv.h"
|
#include "dwc2_udc_otg_priv.h"
|
||||||
|
|
||||||
|
@ -222,6 +230,7 @@ static int udc_enable(struct dwc2_udc *dev)
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
#if !CONFIG_IS_ENABLED(DM_USB_GADGET)
|
||||||
/*
|
/*
|
||||||
Register entry point for the peripheral controller driver.
|
Register entry point for the peripheral controller driver.
|
||||||
*/
|
*/
|
||||||
|
@ -296,6 +305,54 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
|
||||||
udc_disable(dev);
|
udc_disable(dev);
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
#else /* !CONFIG_IS_ENABLED(DM_USB_GADGET) */
|
||||||
|
|
||||||
|
static int dwc2_gadget_start(struct usb_gadget *g,
|
||||||
|
struct usb_gadget_driver *driver)
|
||||||
|
{
|
||||||
|
struct dwc2_udc *dev = the_controller;
|
||||||
|
|
||||||
|
debug_cond(DEBUG_SETUP != 0, "%s: %s\n", __func__, "no name");
|
||||||
|
|
||||||
|
if (!driver ||
|
||||||
|
(driver->speed != USB_SPEED_FULL &&
|
||||||
|
driver->speed != USB_SPEED_HIGH) ||
|
||||||
|
!driver->bind || !driver->disconnect || !driver->setup)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
if (!dev)
|
||||||
|
return -ENODEV;
|
||||||
|
|
||||||
|
if (dev->driver)
|
||||||
|
return -EBUSY;
|
||||||
|
|
||||||
|
/* first hook up the driver ... */
|
||||||
|
dev->driver = driver;
|
||||||
|
|
||||||
|
debug_cond(DEBUG_SETUP != 0,
|
||||||
|
"Registered gadget driver %s\n", dev->gadget.name);
|
||||||
|
return udc_enable(dev);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int dwc2_gadget_stop(struct usb_gadget *g)
|
||||||
|
{
|
||||||
|
struct dwc2_udc *dev = the_controller;
|
||||||
|
|
||||||
|
if (!dev)
|
||||||
|
return -ENODEV;
|
||||||
|
|
||||||
|
if (!dev->driver)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
dev->driver = 0;
|
||||||
|
stop_activity(dev, dev->driver);
|
||||||
|
|
||||||
|
udc_disable(dev);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif /* !CONFIG_IS_ENABLED(DM_USB_GADGET) */
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* done - retire a request; caller blocked irqs
|
* done - retire a request; caller blocked irqs
|
||||||
|
@ -730,6 +787,10 @@ static void dwc2_fifo_flush(struct usb_ep *_ep)
|
||||||
|
|
||||||
static const struct usb_gadget_ops dwc2_udc_ops = {
|
static const struct usb_gadget_ops dwc2_udc_ops = {
|
||||||
/* current versions must always be self-powered */
|
/* current versions must always be self-powered */
|
||||||
|
#if CONFIG_IS_ENABLED(DM_USB_GADGET)
|
||||||
|
.udc_start = dwc2_gadget_start,
|
||||||
|
.udc_stop = dwc2_gadget_stop,
|
||||||
|
#endif
|
||||||
};
|
};
|
||||||
|
|
||||||
static struct dwc2_udc memory = {
|
static struct dwc2_udc memory = {
|
||||||
|
@ -841,12 +902,239 @@ int dwc2_udc_probe(struct dwc2_plat_otg_data *pdata)
|
||||||
return retval;
|
return retval;
|
||||||
}
|
}
|
||||||
|
|
||||||
int usb_gadget_handle_interrupts(int index)
|
int dwc2_udc_handle_interrupt(void)
|
||||||
{
|
{
|
||||||
u32 intr_status = readl(®->gintsts);
|
u32 intr_status = readl(®->gintsts);
|
||||||
u32 gintmsk = readl(®->gintmsk);
|
u32 gintmsk = readl(®->gintmsk);
|
||||||
|
|
||||||
if (intr_status & gintmsk)
|
if (intr_status & gintmsk)
|
||||||
return dwc2_udc_irq(1, (void *)the_controller);
|
return dwc2_udc_irq(1, (void *)the_controller);
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
#if !CONFIG_IS_ENABLED(DM_USB_GADGET)
|
||||||
|
|
||||||
|
int usb_gadget_handle_interrupts(int index)
|
||||||
|
{
|
||||||
|
return dwc2_udc_handle_interrupt();
|
||||||
|
}
|
||||||
|
|
||||||
|
#else /* CONFIG_IS_ENABLED(DM_USB_GADGET) */
|
||||||
|
|
||||||
|
struct dwc2_priv_data {
|
||||||
|
struct clk_bulk clks;
|
||||||
|
struct reset_ctl_bulk resets;
|
||||||
|
struct phy *phys;
|
||||||
|
int num_phys;
|
||||||
|
};
|
||||||
|
|
||||||
|
int dm_usb_gadget_handle_interrupts(struct udevice *dev)
|
||||||
|
{
|
||||||
|
return dwc2_udc_handle_interrupt();
|
||||||
|
}
|
||||||
|
|
||||||
|
int dwc2_phy_setup(struct udevice *dev, struct phy **array, int *num_phys)
|
||||||
|
{
|
||||||
|
int i, ret, count;
|
||||||
|
struct phy *usb_phys;
|
||||||
|
|
||||||
|
/* Return if no phy declared */
|
||||||
|
if (!dev_read_prop(dev, "phys", NULL))
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
count = dev_count_phandle_with_args(dev, "phys", "#phy-cells");
|
||||||
|
if (count <= 0)
|
||||||
|
return count;
|
||||||
|
|
||||||
|
usb_phys = devm_kcalloc(dev, count, sizeof(struct phy),
|
||||||
|
GFP_KERNEL);
|
||||||
|
if (!usb_phys)
|
||||||
|
return -ENOMEM;
|
||||||
|
|
||||||
|
for (i = 0; i < count; i++) {
|
||||||
|
ret = generic_phy_get_by_index(dev, i, &usb_phys[i]);
|
||||||
|
if (ret && ret != -ENOENT) {
|
||||||
|
dev_err(dev, "Failed to get USB PHY%d for %s\n",
|
||||||
|
i, dev->name);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
for (i = 0; i < count; i++) {
|
||||||
|
ret = generic_phy_init(&usb_phys[i]);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(dev, "Can't init USB PHY%d for %s\n",
|
||||||
|
i, dev->name);
|
||||||
|
goto phys_init_err;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
for (i = 0; i < count; i++) {
|
||||||
|
ret = generic_phy_power_on(&usb_phys[i]);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(dev, "Can't power USB PHY%d for %s\n",
|
||||||
|
i, dev->name);
|
||||||
|
goto phys_poweron_err;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
*array = usb_phys;
|
||||||
|
*num_phys = count;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
phys_poweron_err:
|
||||||
|
for (i = count - 1; i >= 0; i--)
|
||||||
|
generic_phy_power_off(&usb_phys[i]);
|
||||||
|
|
||||||
|
for (i = 0; i < count; i++)
|
||||||
|
generic_phy_exit(&usb_phys[i]);
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
phys_init_err:
|
||||||
|
for (; i >= 0; i--)
|
||||||
|
generic_phy_exit(&usb_phys[i]);
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
void dwc2_phy_shutdown(struct udevice *dev, struct phy *usb_phys, int num_phys)
|
||||||
|
{
|
||||||
|
int i, ret;
|
||||||
|
|
||||||
|
for (i = 0; i < num_phys; i++) {
|
||||||
|
if (!generic_phy_valid(&usb_phys[i]))
|
||||||
|
continue;
|
||||||
|
|
||||||
|
ret = generic_phy_power_off(&usb_phys[i]);
|
||||||
|
ret |= generic_phy_exit(&usb_phys[i]);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(dev, "Can't shutdown USB PHY%d for %s\n",
|
||||||
|
i, dev->name);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static int dwc2_udc_otg_ofdata_to_platdata(struct udevice *dev)
|
||||||
|
{
|
||||||
|
struct dwc2_plat_otg_data *platdata = dev_get_platdata(dev);
|
||||||
|
int node = dev_of_offset(dev);
|
||||||
|
|
||||||
|
if (usb_get_dr_mode(node) != USB_DR_MODE_PERIPHERAL) {
|
||||||
|
dev_dbg(dev, "Invalid mode\n");
|
||||||
|
return -ENODEV;
|
||||||
|
}
|
||||||
|
|
||||||
|
platdata->regs_otg = dev_read_addr(dev);
|
||||||
|
|
||||||
|
platdata->rx_fifo_sz = dev_read_u32_default(dev, "g-rx-fifo-size", 0);
|
||||||
|
platdata->np_tx_fifo_sz = dev_read_u32_default(dev,
|
||||||
|
"g-np-tx-fifo-size", 0);
|
||||||
|
platdata->tx_fifo_sz = dev_read_u32_default(dev, "g-tx-fifo-size", 0);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int dwc2_udc_otg_reset_init(struct udevice *dev,
|
||||||
|
struct reset_ctl_bulk *resets)
|
||||||
|
{
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
ret = reset_get_bulk(dev, resets);
|
||||||
|
if (ret == -ENOTSUPP)
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = reset_deassert_bulk(resets);
|
||||||
|
if (ret) {
|
||||||
|
reset_release_bulk(resets);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int dwc2_udc_otg_clk_init(struct udevice *dev,
|
||||||
|
struct clk_bulk *clks)
|
||||||
|
{
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
ret = clk_get_bulk(dev, clks);
|
||||||
|
if (ret == -ENOSYS)
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = clk_enable_bulk(clks);
|
||||||
|
if (ret) {
|
||||||
|
clk_release_bulk(clks);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int dwc2_udc_otg_probe(struct udevice *dev)
|
||||||
|
{
|
||||||
|
struct dwc2_plat_otg_data *platdata = dev_get_platdata(dev);
|
||||||
|
struct dwc2_priv_data *priv = dev_get_priv(dev);
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
ret = dwc2_udc_otg_clk_init(dev, &priv->clks);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = dwc2_udc_otg_reset_init(dev, &priv->resets);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = dwc2_phy_setup(dev, &priv->phys, &priv->num_phys);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
ret = dwc2_udc_probe(platdata);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
the_controller->driver = 0;
|
||||||
|
|
||||||
|
ret = usb_add_gadget_udc((struct device *)dev, &the_controller->gadget);
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int dwc2_udc_otg_remove(struct udevice *dev)
|
||||||
|
{
|
||||||
|
struct dwc2_priv_data *priv = dev_get_priv(dev);
|
||||||
|
|
||||||
|
usb_del_gadget_udc(&the_controller->gadget);
|
||||||
|
|
||||||
|
reset_release_bulk(&priv->resets);
|
||||||
|
|
||||||
|
clk_release_bulk(&priv->clks);
|
||||||
|
|
||||||
|
dwc2_phy_shutdown(dev, priv->phys, priv->num_phys);
|
||||||
|
|
||||||
|
return dm_scan_fdt_dev(dev);
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct udevice_id dwc2_udc_otg_ids[] = {
|
||||||
|
{ .compatible = "snps,dwc2" },
|
||||||
|
};
|
||||||
|
|
||||||
|
U_BOOT_DRIVER(dwc2_udc_otg) = {
|
||||||
|
.name = "dwc2-udc-otg",
|
||||||
|
.id = UCLASS_USB_GADGET_GENERIC,
|
||||||
|
.of_match = dwc2_udc_otg_ids,
|
||||||
|
.ofdata_to_platdata = dwc2_udc_otg_ofdata_to_platdata,
|
||||||
|
.probe = dwc2_udc_otg_probe,
|
||||||
|
.remove = dwc2_udc_otg_remove,
|
||||||
|
.platdata_auto_alloc_size = sizeof(struct dwc2_plat_otg_data),
|
||||||
|
.priv_auto_alloc_size = sizeof(struct dwc2_priv_data),
|
||||||
|
};
|
||||||
|
#endif /* CONFIG_IS_ENABLED(DM_USB_GADGET) */
|
||||||
|
|
Loading…
Add table
Reference in a new issue