diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 9540ba4313..16613aa258 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -217,6 +217,7 @@ dtb-$(CONFIG_TARGET_DRAGONBOARD410C) += dragonboard410c.dtb
 dtb-$(CONFIG_TARGET_DRAGONBOARD820C) += dragonboard820c.dtb
 
 dtb-$(CONFIG_STM32F4) += stm32f429-disco.dtb \
+	stm32429i-eval.dtb \
 	stm32f469-disco.dtb
 
 dtb-$(CONFIG_STM32F7) += stm32f746-disco.dtb \
diff --git a/arch/arm/dts/stm32429i-eval.dts b/arch/arm/dts/stm32429i-eval.dts
new file mode 100644
index 0000000000..362ea4245e
--- /dev/null
+++ b/arch/arm/dts/stm32429i-eval.dts
@@ -0,0 +1,276 @@
+/*
+ * Copyright (C) 2015, STMicroelectronics - All Rights Reserved
+ * Author: Maxime Coquelin <mcoquelin.stm32@gmail.com> for STMicroelectronics.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+#include "stm32f429.dtsi"
+#include "stm32f429-pinctrl.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "STMicroelectronics STM32429i-EVAL board";
+	compatible = "st,stm32429i-eval", "st,stm32f429";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x00000000 0x2000000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+	clocks {
+		clk_ext_camera: clk-ext-camera {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		dma-ranges = <0xc0000000 0x0 0x10000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_vref: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vref";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		green {
+			gpios = <&gpiog 6 1>;
+			linux,default-trigger = "heartbeat";
+		};
+		orange {
+			gpios = <&gpiog 7 1>;
+		};
+		red {
+			gpios = <&gpiog 10 1>;
+		};
+		blue {
+			gpios = <&gpiog 12 1>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		button@0 {
+			label = "Wake up";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpioa 0 0>;
+		};
+		button@1 {
+			label = "Tamper";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpioc 13 0>;
+		};
+	};
+
+	usbotg_hs_phy: usbphy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHSULPI)>;
+		clock-names = "main_clk";
+	};
+
+	panel_rgb: panel-rgb {
+		compatible = "ampire,am-480272h3tmqw-t01h";
+		status = "okay";
+		port {
+			panel_in_rgb: endpoint {
+				remote-endpoint = <&ltdc_out_rgb>;
+			};
+		};
+	};
+
+	mmc_vcard: mmc_vcard {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc_vcard";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc3_in8_pin>;
+	vref-supply = <&reg_vref>;
+	status = "okay";
+	adc3: adc@200 {
+		st,adc-channels = <8>;
+		status = "okay";
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&crc {
+	status = "okay";
+};
+
+&dcmi {
+	status = "okay";
+
+	port {
+		dcmi_0: endpoint {
+			remote-endpoint = <&ov2640_0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ov2640: camera@30 {
+		compatible = "ovti,ov2640";
+		reg = <0x30>;
+		resetb-gpios = <&stmpegpio 2 GPIO_ACTIVE_HIGH>;
+		pwdn-gpios = <&stmpegpio 0 GPIO_ACTIVE_LOW>;
+		clocks = <&clk_ext_camera>;
+		clock-names = "xvclk";
+		status = "okay";
+
+		port {
+			ov2640_0: endpoint {
+				remote-endpoint = <&dcmi_0>;
+			};
+		};
+	};
+
+	stmpe1600: stmpe1600@42 {
+		compatible = "st,stmpe1600";
+		reg = <0x42>;
+		interrupts = <8 3>;
+		interrupt-parent = <&gpioi>;
+		interrupt-controller;
+		wakeup-source;
+
+		stmpegpio: stmpe_gpio {
+			compatible = "st,stmpe-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+};
+
+&iwdg {
+	status = "okay";
+	timeout-sec = <32>;
+};
+
+&ltdc {
+	status = "okay";
+	pinctrl-0 = <&ltdc_pins>;
+	pinctrl-names = "default";
+	dma-ranges;
+
+	port {
+		ltdc_out_rgb: endpoint {
+			remote-endpoint = <&panel_in_rgb>;
+		};
+	};
+};
+
+&mac {
+	status = "okay";
+	pinctrl-0	= <&ethernet_mii>;
+	pinctrl-names	= "default";
+	phy-mode	= "mii";
+	phy-handle	= <&phy1>;
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdio {
+	status = "okay";
+	vmmc-supply = <&mmc_vcard>;
+	cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	pinctrl-names = "default", "opendrain";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_pins_od>;
+	bus-width = <4>;
+};
+
+&timers1 {
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm1_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	timer@0 {
+		status = "okay";
+	};
+};
+
+&timers3 {
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm3_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	timer@2 {
+		status = "okay";
+	};
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "host";
+	phys = <&usbotg_hs_phy>;
+	phy-names = "usb2-phy";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};