ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3

Update all A31/A31s devicetree dtsi and dtsi files from
Linux-v4.18-rc3 with below commit:
commit b240b419db5d624ce7a5a397d6f62a1a686009ec
Merge: 9c2dd8405c0c 518d2f43c358
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Thu Apr 5 21:18:09 2018 -0700

    Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

arch/arm/dts/sun6i-a31-app4-evb1.dts

@@ -47,7 +47,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Allwinner A31 APP4 EVB1 Evaluation Board";
@@ -68,10 +67,8 @@
 
 &pio {
 	usb1_vbus_pin_a: usb1_vbus_pin@0 {
-		allwinner,pins = "PH27";
+		pins = "PH27";
-		allwinner,function = "gpio_out";
+		function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
 

arch/arm/dts/sun6i-a31-colombus.dts

@@ -47,7 +47,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "WITS A31 Colombus Evaluation Board";
@@ -118,35 +117,30 @@
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
 	vmmc-supply = <&reg_vcc3v0>;
 	bus-width = <4>;
-	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
-	cd-inverted;
 	status = "okay";
 };
 
 &mmc0_pins_a {
-	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	bias-pull-up;
 };
 
 &pio {
 	mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
-		allwinner,pins = "PA8";
+		pins = "PA8";
-		allwinner,function = "gpio_in";
+		function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		bias-pull-up;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 
 	usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
-		allwinner,pins = "PH24";
+		pins = "PH24";
-		allwinner,function = "gpio_out";
+		function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
 	i2c_lcd_pins: i2c_lcd_pin@0 {
-		allwinner,pins = "PA23", "PA24";
+		pins = "PA23", "PA24";
-		allwinner,function = "gpio_out";
+		function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		bias-pull-up;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 };
 

arch/arm/dts/sun6i-a31-hummingbird.dts

@@ -47,7 +47,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Merrii A31 Hummingbird";
@@ -63,16 +62,98 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	vga-connector {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_dac_out>;
+			};
+		};
+	};
+
+	vga-dac {
+		compatible = "dumb-vga-dac";
+		vdd-supply = <&reg_vga_3v3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				vga_dac_in: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&tcon0_out_vga>;
+				};
+			};
+
+			port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				vga_dac_out: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	reg_vga_3v3: vga_3v3_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vga-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
 	};
 };
 
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Speaker", "LINEOUT",
+		"LINEIN", "Line In",
+		"MIC1", "Mic",
+		"MIC2", "Headset Mic",
+		"Mic",	"MBIAS",
+		"Headset Mic", "HBIAS";
+	allwinner,pa-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc3>;
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -92,6 +173,16 @@
 	};
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
@@ -127,14 +218,13 @@
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
-	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
-	cd-inverted;
 	status = "okay";
 };
 
 &mmc0_pins_a {
 	/* external pull-ups missing for some pins */
-	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	bias-pull-up;
 };
 
 &mmc1 {
@@ -153,24 +243,19 @@
 
 &pio {
 	gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 {
-		allwinner,pins = "PA21";
+		pins = "PA21";
-		allwinner,function = "gpio_out";
+		function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
 	mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
-		allwinner,pins = "PA8";
+		pins = "PA8";
-		allwinner,function = "gpio_in";
+		function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		bias-pull-up;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 
 	wifi_reset_pin_hummingbird: wifi_reset_pin@0 {
-		allwinner,pins = "PG10";
+		pins = "PG10";
-		allwinner,function = "gpio_out";
+		function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
 
@@ -182,11 +267,16 @@
 		reg = <0x68>;
 		interrupt-parent = <&nmi_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;
 	};
 };
 
 #include "axp22x.dtsi"
 
+&ac_power_supply {
+	status = "okay";
+};
+
 &reg_aldo1 {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
@@ -240,23 +330,48 @@
 	regulator-name = "vcc-dram";
 };
 
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
 	status = "okay";
 };
 
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd0_rgb888_pins>;
+};
+
+&tcon0_out {
+	tcon0_out_vga: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vga_dac_in>;
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
 	status = "okay";
 };
 
-&usb1_vbus_pin_a {
+&usb_otg {
-	/* different pin from sunxi-common-regulators */
+	dr_mode = "otg";
-	allwinner,pins = "PH24";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
 };
 
 &usbphy {
+	usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+	usb0_vbus_det-gpio = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };

arch/arm/dts/sun6i-a31-i7.dts

@@ -45,7 +45,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Mele I7 Quad top set box";
@@ -59,6 +58,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -69,6 +79,33 @@
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP";
+	status = "okay";
+};
+
+&de {
+	status = "okay";
 };
 
 &ehci0 {
@@ -91,6 +128,16 @@
 	};
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
@@ -102,31 +149,25 @@
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
-	cd-inverted;
 	status = "okay";
 };
 
 &pio {
 	led_pins_i7: led_pins@0 {
-		allwinner,pins = "PH13";
+		pins = "PH13";
-		allwinner,function = "gpio_out";
+		function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
 	mmc0_cd_pin_i7: mmc0_cd_pin@0 {
-		allwinner,pins = "PH22";
+		pins = "PH22";
-		allwinner,function = "gpio_in";
+		function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		bias-pull-up;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 
 	usb1_vbus_pin_i7: usb1_vbus_pin@0 {
-		allwinner,pins = "PC27";
+		pins = "PC27";
-		allwinner,function = "gpio_out";
+		function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
 
@@ -137,6 +178,17 @@
 	status = "okay";
 };
 
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_pins_a>;
+	spdif-out = "okay";
+	status = "okay";
+};
+
+&tcon0 {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;

arch/arm/dts/sun6i-a31-m9.dts

@@ -45,7 +45,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Mele M9 top set box";
@@ -108,8 +107,7 @@
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
-	cd-inverted;
 	status = "okay";
 };
 
@@ -128,24 +126,19 @@
 
 &pio {
 	led_pins_m9: led_pins@0 {
-		allwinner,pins = "PH13";
+		pins = "PH13";
-		allwinner,function = "gpio_out";
+		function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
 	mmc0_cd_pin_m9: mmc0_cd_pin@0 {
-		allwinner,pins = "PH22";
+		pins = "PH22";
-		allwinner,function = "gpio_in";
+		function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		bias-pull-up;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 
 	usb1_vbus_pin_m9: usb1_vbus_pin@0 {
-		allwinner,pins = "PC27";
+		pins = "PC27";
-		allwinner,function = "gpio_out";
+		function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
 

arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts

@@ -45,7 +45,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Mele A1000G Quad top set box";
@@ -108,8 +107,7 @@
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
-	cd-inverted;
 	status = "okay";
 };
 
@@ -128,24 +126,19 @@
 
 &pio {
 	led_pins_m9: led_pins@0 {
-		allwinner,pins = "PH13";
+		pins = "PH13";
-		allwinner,function = "gpio_out";
+		function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
 	mmc0_cd_pin_m9: mmc0_cd_pin@0 {
-		allwinner,pins = "PH22";
+		pins = "PH22";
-		allwinner,function = "gpio_in";
+		function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		bias-pull-up;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 
 	usb1_vbus_pin_m9: usb1_vbus_pin@0 {
-		allwinner,pins = "PC27";
+		pins = "PC27";
-		allwinner,function = "gpio_out";
+		function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
 

arch/arm/dts/sun6i-a31s-cs908.dts

@@ -43,8 +43,6 @@
 /dts-v1/;
 #include "sun6i-a31s.dtsi"
 
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-
 / {
 	model = "CSQ CS908 top set box";
 	compatible = "csq,cs908", "allwinner,sun6i-a31s";

arch/arm/dts/sun6i-a31s-primo81.dts

@@ -48,22 +48,46 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "MSI Primo81 tablet";
 	compatible = "msi,primo81", "allwinner,sun6i-a31s";
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
 };
 
 &cpu0 {
 	cpu-supply = <&reg_dcdc3>;
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	/* rtl8188etv wifi is connected here */
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c0 {
 	/* pull-ups and device VDDIO use AXP221 DLDO3 */
 	pinctrl-names = "default";
@@ -127,31 +151,26 @@
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
-	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
-	cd-inverted;
 	status = "okay";
 };
 
 &pio {
 	gt911_int_primo81: gt911_int_pin@0 {
-		allwinner,pins = "PA3";
+		pins = "PA3";
-		allwinner,function = "gpio_in";
+		function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
 	mma8452_int_primo81: mma8452_int_pin@0 {
-		allwinner,pins = "PA9";
+		pins = "PA9";
-		allwinner,function = "gpio_in";
+		function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		bias-pull-up;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 
 	mmc0_cd_pin_primo81: mmc0_cd_pin@0 {
-		allwinner,pins = "PA8";
+		pins = "PA8";
-		allwinner,function = "gpio_in";
+		function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		bias-pull-up;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 };
 
@@ -163,11 +182,16 @@
 		reg = <0x68>;
 		interrupt-parent = <&nmi_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;
 	};
 };
 
 #include "axp22x.dtsi"
 
+&battery_power_supply {
+	status = "okay";
+};
+
 &reg_aldo3 {
 	regulator-always-on;
 	regulator-min-microvolt = <2700000>;
@@ -231,6 +255,11 @@
 	regulator-name = "vddio-csi";
 };
 
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
 &reg_eldo3 {
 	regulator-min-microvolt = <1080000>;
 	regulator-max-microvolt = <1320000>;
@@ -243,12 +272,18 @@
 };
 
 &usb_otg {
-	/* otg support requires support for AXP221 usb-power-supply and GPIO */
+	dr_mode = "otg";
-	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_power_supply {
 	status = "okay";
 };
 
 &usbphy {
+	usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
 	usb1_vbus-supply = <&reg_dldo1>;
 	status = "okay";
 };

arch/arm/dts/sun6i-a31s-sina31s-core.dtsi

@@ -45,7 +45,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Sinlinx SinA31s Core Board";

arch/arm/dts/sun6i-a31s-sina31s.dts

@@ -53,6 +53,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -63,6 +74,35 @@
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
 		};
 	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",	"MBIAS";
+	status = "okay";
+};
+
+&de {
+	status = "okay";
 };
 
 &ehci0 {
@@ -87,6 +127,16 @@
 	};
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
@@ -117,8 +167,7 @@
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
-	cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
+	cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
-	cd-inverted;
 	status = "okay";
 };
 
@@ -128,17 +177,14 @@
 
 &pio {
 	led_pin_sina31s: led_pin@0 {
-		allwinner,pins = "PH13";
+		pins = "PH13";
-		allwinner,function = "gpio_out";
+		function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
 	mmc0_cd_pin_sina31s: mmc0_cd_pin@0 {
-		allwinner,pins = "PA4";
+		pins = "PA4";
-		allwinner,function = "gpio_in";
+		function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		bias-pull-up;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 };
 
@@ -148,6 +194,17 @@
 	regulator-name = "vcc-gmac-phy";
 };
 
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
 &usbphy {
 	status = "okay";
 };

arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts

@@ -42,7 +42,6 @@
 
 /dts-v1/;
 #include "sun6i-a31s.dtsi"
-#include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -86,6 +85,10 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -95,6 +98,7 @@
 	pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>;
 	phy = <&phy1>;
 	phy-mode = "rgmii";
+	phy-supply = <&reg_dldo1>;
 	snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 30000>;
@@ -114,27 +118,26 @@
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>;
-	vmmc-supply = <&reg_vcc3v0>;
+	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
-	cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
+	cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
-	cd-inverted;
 	status = "okay";
 };
 
 &mmc0_pins_a {
-	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	bias-pull-up;
 };
 
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins_a>;
-	vmmc-supply = <&reg_vcc3v0>;
+	vmmc-supply = <&reg_aldo1>;
 	mmc-pwrseq = <&mmc2_pwrseq>;
 	bus-width = <4>;
 	non-removable;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&r_pio>;
@@ -144,45 +147,148 @@
 };
 
 &mmc2_pins_a {
-	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	bias-pull-up;
 };
 
 &ohci0 {
 	status = "okay";
 };
 
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
 &pio {
 	gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 {
-		allwinner,pins = "PA21";
+		pins = "PA21";
-		allwinner,function = "gpio_out";
+		function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
 	led_pins_bpi_m2: led_pins@0 {
-		allwinner,pins = "PG5", "PG10", "PG11";
+		pins = "PG5", "PG10", "PG11";
-		allwinner,function = "gpio_out";
+		function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
 	mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 {
-		allwinner,pins = "PA4";
+		pins = "PA4";
-		allwinner,function = "gpio_in";
+		function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		bias-pull-up;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 };
 
 &r_pio {
 	mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 {
-		allwinner,pins = "PL8";
+		pins = "PL8";
-		allwinner,function = "gpio_out";
+		function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
 
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-gmac";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vdd-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-mac";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pb";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vdd-csi";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pm-cpus";
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;

arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts

@@ -45,7 +45,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Yones TopTech BS1078 v2 Tablet";
@@ -92,10 +91,9 @@
 
 &pio {
 	mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 {
-		allwinner,pins = "PA8";
+		pins = "PA8";
-		allwinner,function = "gpio_in";
+		function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		bias-pull-up;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 };
 
@@ -104,13 +102,12 @@
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>;
 	vmmc-supply = <&reg_vcc3v0>;
 	bus-width = <4>;
-	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
-	cd-inverted;
 	status = "okay";
 };
 
 &mmc0_pins_a {
-	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	bias-pull-up;
 };
 
 &p2wi {

arch/arm/dts/sun6i-a31s.dtsi

@@ -48,6 +48,14 @@
 
 #include "sun6i-a31.dtsi"
 
+&de {
+	compatible = "allwinner,sun6i-a31s-display-engine";
+};
+
 &pio {
 	compatible = "allwinner,sun6i-a31s-pinctrl";
 };
+
+&tcon0 {
+	compatible = "allwinner,sun6i-a31s-tcon";
+};

arch/arm/dts/sun6i-reference-design-tablet.dtsi

@@ -44,7 +44,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	aliases {
@@ -70,24 +69,21 @@
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
-	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
-	cd-inverted;
 	status = "okay";
 };
 
 &pio {
 	mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
-		allwinner,pins = "PA8";
+		pins = "PA8";
-		allwinner,function = "gpio_in";
+		function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		bias-pull-up;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 
 	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		allwinner,pins = "PA15";
+		pins = "PA15";
-		allwinner,function = "gpio_in";
+		function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		bias-pull-up;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 };
 

include/dt-bindings/clock/sun6i-a31-ccu.h

@@ -0,0 +1,191 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN6I_A31_H_
+#define _DT_BINDINGS_CLK_SUN6I_A31_H_
+
+#define CLK_PLL_VIDEO0_2X	7
+
+#define CLK_PLL_PERIPH		10
+
+#define CLK_PLL_VIDEO1_2X	13
+
+#define CLK_CPU			18
+
+#define CLK_AHB1_MIPIDSI	23
+#define CLK_AHB1_SS		24
+#define CLK_AHB1_DMA		25
+#define CLK_AHB1_MMC0		26
+#define CLK_AHB1_MMC1		27
+#define CLK_AHB1_MMC2		28
+#define CLK_AHB1_MMC3		29
+#define CLK_AHB1_NAND1		30
+#define CLK_AHB1_NAND0		31
+#define CLK_AHB1_SDRAM		32
+#define CLK_AHB1_EMAC		33
+#define CLK_AHB1_TS		34
+#define CLK_AHB1_HSTIMER	35
+#define CLK_AHB1_SPI0		36
+#define CLK_AHB1_SPI1		37
+#define CLK_AHB1_SPI2		38
+#define CLK_AHB1_SPI3		39
+#define CLK_AHB1_OTG		40
+#define CLK_AHB1_EHCI0		41
+#define CLK_AHB1_EHCI1		42
+#define CLK_AHB1_OHCI0		43
+#define CLK_AHB1_OHCI1		44
+#define CLK_AHB1_OHCI2		45
+#define CLK_AHB1_VE		46
+#define CLK_AHB1_LCD0		47
+#define CLK_AHB1_LCD1		48
+#define CLK_AHB1_CSI		49
+#define CLK_AHB1_HDMI		50
+#define CLK_AHB1_BE0		51
+#define CLK_AHB1_BE1		52
+#define CLK_AHB1_FE0		53
+#define CLK_AHB1_FE1		54
+#define CLK_AHB1_MP		55
+#define CLK_AHB1_GPU		56
+#define CLK_AHB1_DEU0		57
+#define CLK_AHB1_DEU1		58
+#define CLK_AHB1_DRC0		59
+#define CLK_AHB1_DRC1		60
+
+#define CLK_APB1_CODEC		61
+#define CLK_APB1_SPDIF		62
+#define CLK_APB1_DIGITAL_MIC	63
+#define CLK_APB1_PIO		64
+#define CLK_APB1_DAUDIO0	65
+#define CLK_APB1_DAUDIO1	66
+
+#define CLK_APB2_I2C0		67
+#define CLK_APB2_I2C1		68
+#define CLK_APB2_I2C2		69
+#define CLK_APB2_I2C3		70
+#define CLK_APB2_UART0		71
+#define CLK_APB2_UART1		72
+#define CLK_APB2_UART2		73
+#define CLK_APB2_UART3		74
+#define CLK_APB2_UART4		75
+#define CLK_APB2_UART5		76
+
+#define CLK_NAND0		77
+#define CLK_NAND1		78
+#define CLK_MMC0		79
+#define CLK_MMC0_SAMPLE		80
+#define CLK_MMC0_OUTPUT		81
+#define CLK_MMC1		82
+#define CLK_MMC1_SAMPLE		83
+#define CLK_MMC1_OUTPUT		84
+#define CLK_MMC2		85
+#define CLK_MMC2_SAMPLE		86
+#define CLK_MMC2_OUTPUT		87
+#define CLK_MMC3		88
+#define CLK_MMC3_SAMPLE		89
+#define CLK_MMC3_OUTPUT		90
+#define CLK_TS			91
+#define CLK_SS			92
+#define CLK_SPI0		93
+#define CLK_SPI1		94
+#define CLK_SPI2		95
+#define CLK_SPI3		96
+#define CLK_DAUDIO0		97
+#define CLK_DAUDIO1		98
+#define CLK_SPDIF		99
+#define CLK_USB_PHY0		100
+#define CLK_USB_PHY1		101
+#define CLK_USB_PHY2		102
+#define CLK_USB_OHCI0		103
+#define CLK_USB_OHCI1		104
+#define CLK_USB_OHCI2		105
+
+#define CLK_DRAM_VE		110
+#define CLK_DRAM_CSI_ISP	111
+#define CLK_DRAM_TS		112
+#define CLK_DRAM_DRC0		113
+#define CLK_DRAM_DRC1		114
+#define CLK_DRAM_DEU0		115
+#define CLK_DRAM_DEU1		116
+#define CLK_DRAM_FE0		117
+#define CLK_DRAM_FE1		118
+#define CLK_DRAM_BE0		119
+#define CLK_DRAM_BE1		120
+#define CLK_DRAM_MP		121
+
+#define CLK_BE0			122
+#define CLK_BE1			123
+#define CLK_FE0			124
+#define CLK_FE1			125
+#define CLK_MP			126
+#define CLK_LCD0_CH0		127
+#define CLK_LCD1_CH0		128
+#define CLK_LCD0_CH1		129
+#define CLK_LCD1_CH1		130
+#define CLK_CSI0_SCLK		131
+#define CLK_CSI0_MCLK		132
+#define CLK_CSI1_MCLK		133
+#define CLK_VE			134
+#define CLK_CODEC		135
+#define CLK_AVS			136
+#define CLK_DIGITAL_MIC		137
+#define CLK_HDMI		138
+#define CLK_HDMI_DDC		139
+#define CLK_PS			140
+
+#define CLK_MIPI_DSI		143
+#define CLK_MIPI_DSI_DPHY	144
+#define CLK_MIPI_CSI_DPHY	145
+#define CLK_IEP_DRC0		146
+#define CLK_IEP_DRC1		147
+#define CLK_IEP_DEU0		148
+#define CLK_IEP_DEU1		149
+#define CLK_GPU_CORE		150
+#define CLK_GPU_MEMORY		151
+#define CLK_GPU_HYD		152
+#define CLK_ATS			153
+#define CLK_TRACE		154
+
+#define CLK_OUT_A		155
+#define CLK_OUT_B		156
+#define CLK_OUT_C		157
+
+#endif /* _DT_BINDINGS_CLK_SUN6I_A31_H_ */

include/dt-bindings/reset/sun6i-a31-ccu.h

@@ -0,0 +1,106 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN6I_A31_H_
+#define _DT_BINDINGS_RST_SUN6I_A31_H_
+
+#define RST_USB_PHY0		0
+#define RST_USB_PHY1		1
+#define RST_USB_PHY2		2
+
+#define RST_AHB1_MIPI_DSI	3
+#define RST_AHB1_SS		4
+#define RST_AHB1_DMA		5
+#define RST_AHB1_MMC0		6
+#define RST_AHB1_MMC1		7
+#define RST_AHB1_MMC2		8
+#define RST_AHB1_MMC3		9
+#define RST_AHB1_NAND1		10
+#define RST_AHB1_NAND0		11
+#define RST_AHB1_SDRAM		12
+#define RST_AHB1_EMAC		13
+#define RST_AHB1_TS		14
+#define RST_AHB1_HSTIMER	15
+#define RST_AHB1_SPI0		16
+#define RST_AHB1_SPI1		17
+#define RST_AHB1_SPI2		18
+#define RST_AHB1_SPI3		19
+#define RST_AHB1_OTG		20
+#define RST_AHB1_EHCI0		21
+#define RST_AHB1_EHCI1		22
+#define RST_AHB1_OHCI0		23
+#define RST_AHB1_OHCI1		24
+#define RST_AHB1_OHCI2		25
+#define RST_AHB1_VE		26
+#define RST_AHB1_LCD0		27
+#define RST_AHB1_LCD1		28
+#define RST_AHB1_CSI		29
+#define RST_AHB1_HDMI		30
+#define RST_AHB1_BE0		31
+#define RST_AHB1_BE1		32
+#define RST_AHB1_FE0		33
+#define RST_AHB1_FE1		34
+#define RST_AHB1_MP		35
+#define RST_AHB1_GPU		36
+#define RST_AHB1_DEU0		37
+#define RST_AHB1_DEU1		38
+#define RST_AHB1_DRC0		39
+#define RST_AHB1_DRC1		40
+#define RST_AHB1_LVDS		41
+
+#define RST_APB1_CODEC		42
+#define RST_APB1_SPDIF		43
+#define RST_APB1_DIGITAL_MIC	44
+#define RST_APB1_DAUDIO0	45
+#define RST_APB1_DAUDIO1	46
+#define RST_APB2_I2C0		47
+#define RST_APB2_I2C1		48
+#define RST_APB2_I2C2		49
+#define RST_APB2_I2C3		50
+#define RST_APB2_UART0		51
+#define RST_APB2_UART1		52
+#define RST_APB2_UART2		53
+#define RST_APB2_UART3		54
+#define RST_APB2_UART4		55
+#define RST_APB2_UART5		56
+
+#endif /* _DT_BINDINGS_RST_SUN6I_A31_H_ */