board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.

Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. Those always evaluated TRUE, and thus were always compiled even when IDE really wasn't defined/wanted. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2025-03-21 06:31:31 +00:00 · 2007-07-10 10:48:22 -05:00 · 2007-07-10 10:48:22 -05:00 · d39b574158
commit d39b574158
parent 77a318545d
27 changed files with 42 additions and 42 deletions
--- a/board/jupiter/jupiter.c
+++ b/board/jupiter/jupiter.c
@ -281,7 +281,7 @@ void pci_init_board(void)
 }
 #endif

-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)

 void init_ide_reset (void)
 {
@ -306,7 +306,7 @@ void ide_set_reset (int idereset)
 		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
 	}
 }
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif

 #if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
 void
--- a/board/kup/common/pcmcia.c
+++ b/board/kup/common/pcmcia.c
@ -144,7 +144,7 @@ int pcmcia_hardware_disable(int slot)

 	return (0);
 }
-#endif	/* CFG_CMD_PCMCIA */
+#endif


 int pcmcia_voltage_set(int slot, int vcc, int vpp)
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@ -960,7 +960,7 @@ U_BOOT_CMD(
 	"lsb     - print current setting\n"
 );

-#endif /* CFG_CMD_BSP */
+#endif

 /*----------------------------- Utilities -----------------------------*/
 /***********************************************************************
--- a/board/lwmon/pcmcia.c
+++ b/board/lwmon/pcmcia.c
@ -166,7 +166,7 @@ int pcmcia_hardware_disable(int slot)

 	return (0);
 }
-#endif	/* CFG_CMD_PCMCIA */
+#endif


 int pcmcia_voltage_set(int slot, int vcc, int vpp)
--- a/board/mcc200/auto_update.c
+++ b/board/mcc200/auto_update.c
@ -45,7 +45,7 @@
 #endif

 #if !defined(CONFIG_CMD_FAT)
-#error "must define CFG_CMD_FAT"
+#error "must define CONFIG_CMD_FAT"
 #endif

 #undef AU_DEBUG
--- a/board/mcc200/mcc200.c
+++ b/board/mcc200/mcc200.c
@ -307,7 +307,7 @@ void pci_init_board(void)
 }
 #endif

-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)

 void init_ide_reset (void)
 {
@ -320,7 +320,7 @@ void ide_set_reset (int idereset)
 	debug ("ide_reset(%d)\n", idereset);

 }
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif

 #if defined(CONFIG_CMD_DOC)
 extern void doc_probe (ulong physadr);
--- a/board/netta/pcmcia.c
+++ b/board/netta/pcmcia.c
@ -291,7 +291,7 @@ int pcmcia_hardware_disable(int slot)

 	return (0);
 }
-#endif	/* CFG_CMD_PCMCIA */
+#endif


 int pcmcia_voltage_set(int slot, int vcc, int vpp)
--- a/board/pcippc2/pcippc2.c
+++ b/board/pcippc2/pcippc2.c
@ -241,5 +241,5 @@ U_BOOT_CMD(
 	"wd      - print current status\n"
 );

-#endif	/* CFG_CMD_BSP */
+#endif
 #endif	/* CONFIG_WATCHDOG */
--- a/board/pm520/pm520.c
+++ b/board/pm520/pm520.c
@ -299,7 +299,7 @@ void pci_init_board(void)
 }
 #endif

-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)

 void init_ide_reset (void)
 {
@ -312,7 +312,7 @@ void ide_set_reset (int idereset)
 	debug ("ide_reset(%d)\n", idereset);

 }
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif

 #if defined(CONFIG_CMD_DOC)
 extern void doc_probe (ulong physadr);
--- a/board/r360mpi/pcmcia.c
+++ b/board/r360mpi/pcmcia.c
@ -150,7 +150,7 @@ int pcmcia_hardware_disable(int slot)

 	return (0);
 }
-#endif	/* CFG_CMD_PCMCIA */
+#endif


 int pcmcia_voltage_set(int slot, int vcc, int vpp)
--- a/board/sacsng/sacsng.c
+++ b/board/sacsng/sacsng.c
@ -873,7 +873,7 @@ spi_chipsel_type spi_chipsel[] = {
 };
 int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);

-#endif /* CFG_CMD_SPI */
+#endif

 #endif /* CONFIG_MISC_INIT_R */

--- a/board/siemens/pcu_e/pcu_e.c
+++ b/board/siemens/pcu_e/pcu_e.c
@ -408,7 +408,7 @@ U_BOOT_CMD (puma, 4, 1, do_puma,
 	    "status - print PUMA status\n"
 	    "puma load addr len - load PUMA configuration data\n");

-#endif /* CFG_CMD_BSP */
+#endif

 /* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */

--- a/board/sixnet/sixnet.c
+++ b/board/sixnet/sixnet.c
@ -77,7 +77,7 @@ int checkboard (void)

 #if defined(CONFIG_CMD_PCMCIA)
 #error "SXNI855T has no PCMCIA port"
-#endif	/* CFG_CMD_PCMCIA */
+#endif

 /* ------------------------------------------------------------------------- */

--- a/board/ssv/adnpesc1/adnpesc1.c
+++ b/board/ssv/adnpesc1/adnpesc1.c
@ -89,7 +89,7 @@ spi_chipsel_type spi_chipsel[] = {
 };
 int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);

-#endif /* CFG_CMD_SPI */
+#endif

 #if	defined(CONFIG_POST)
 /*
--- a/board/ssv/common/cmd_sled.c
+++ b/board/ssv/common/cmd_sled.c
@ -158,5 +158,5 @@ int do_sled (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD (sled, 3, 0, do_sled,
 	    "sled    - check and set status led\n",
 	    "sled [name [state]]\n" __NAME_STR "    - state: on|off|blink\n");
-#endif /* CFG_CMD_BSP */
+#endif
 #endif	/* CONFIG_STATUS_LED */
--- a/board/ssv/common/wd_pio.c
+++ b/board/ssv/common/wd_pio.c
@ -156,5 +156,5 @@ U_BOOT_CMD(
 	"wd off  - switch watchdog off\n"
 	"wd      - print current status\n"
 );
-#endif	/* CFG_CMD_BSP */
+#endif
 #endif	/* CONFIG_HW_WATCHDOG */
--- a/board/total5200/total5200.c
+++ b/board/total5200/total5200.c
@ -109,7 +109,7 @@ void pci_init_board(void)
 }
 #endif

-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)

 /* IRDA_1 aka PSC6_3 (pin C13) */
 #define GPIO_IRDA_1	0x20000000UL
@ -133,7 +133,7 @@ void ide_set_reset (int idereset)
 		*(vu_long *) MPC5XXX_GPIO_DATA_O |=  GPIO_IRDA_1;
 	}
 }
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif

 #ifdef CONFIG_VIDEO_SED13806
 #include <sed13806.h>
--- a/board/tqm5200/cmd_stk52xx.c
+++ b/board/tqm5200/cmd_stk52xx.c
@ -1241,4 +1241,4 @@ U_BOOT_CMD(
 	"     - loopback plug(s) for X21/X22 required\n"
 );
 #endif
-#endif /* CFG_CMD_BSP */
+#endif
--- a/board/tqm5200/cmd_tb5200.c
+++ b/board/tqm5200/cmd_tb5200.c
@ -101,4 +101,4 @@ U_BOOT_CMD(
 	);

 #endif /* CONFIG_STK52XX */
-#endif /* CFG_CMD_BSP */
+#endif
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@ -336,7 +336,7 @@ void pci_init_board(void)
 }
 #endif

-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)

 #if defined (CONFIG_MINIFAP)
 #define SM501_POWER_MODE0_GATE		0x00000040UL
@ -389,7 +389,7 @@ void ide_set_reset (int idereset)
 	}
 #endif
 }
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif

 #ifdef CONFIG_POST
 /*
--- a/board/tqm8272/tqm8272.c
+++ b/board/tqm8272/tqm8272.c
@ -1212,7 +1212,7 @@ int board_nand_init(struct nand_chip *nand)
 	return 0;
 }

-#endif	/* CFG_CMD_NAND */
+#endif

 #ifdef CONFIG_PCI
 struct pci_controller hose;
--- a/board/trab/auto_update.c
+++ b/board/trab/auto_update.c
@ -47,7 +47,7 @@
 #endif

 #if !defined(CONFIG_CMD_FAT)
-#error "must define CFG_CMD_FAT"
+#error "must define CONFIG_CMD_FAT"
 #endif

 /*
--- a/board/trab/cmd_trab.c
+++ b/board/trab/cmd_trab.c
@ -893,4 +893,4 @@ U_BOOT_CMD(
 	"      For each measurment a timestamp is printeted\n"
 );

-#endif	/* CFG_CMD_BSP */
+#endif
--- a/board/trab/trab_fkt.c
+++ b/board/trab/trab_fkt.c
@ -155,7 +155,7 @@ int i2c_write_multiple (uchar chip, uint addr, int alen, uchar *buffer,
 			int len);
 int i2c_read_multiple ( uchar chip, uint addr, int alen, uchar *buffer,
 			int len);
-#endif /* CFG_CMD_I2C */
+#endif

 /*
 * TRAB board specific commands. Especially commands for burn-in and function
@ -1019,10 +1019,10 @@ static int touch_write_clibration_values (int calib_point, int x, int y)
 	}
 	return 1;
 #else
-	printf ("No I2C support enabled (CFG_CMD_I2C), could not write "
+	printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write "
 		"to EEPROM\n");
 	return (1);
-#endif /* CFG_CMD_I2C */
+#endif
 }


@ -1130,10 +1130,10 @@ int do_serial_number (char **argv)
 	printf ("%s: unknown command %s\n", __FUNCTION__, argv[2]);
 	return (1);             /* unknown command, return error */
 #else
-	printf ("No I2C support enabled (CFG_CMD_I2C), could not write "
+	printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write "
 		"to EEPROM\n");
 	return (1);
-#endif /* CFG_CMD_I2C */
+#endif
 }


@ -1160,10 +1160,10 @@ int do_crc16 (void)
 	}
 	return (0);
 #else
-	printf ("No I2C support enabled (CFG_CMD_I2C), could not write "
+	printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write "
 		"to EEPROM\n");
 	return (1);
-#endif /* CFG_CMD_I2C */
+#endif
 }


@ -1272,10 +1272,10 @@ int do_eeprom (char **argv)
 	printf ("%s: invalid parameter %s\n", __FUNCTION__, argv[2]);
 	return (1);
 #else
-	printf ("No I2C support enabled (CFG_CMD_I2C), could not write "
+	printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write "
 		"to EEPROM\n");
 	return (1);
-#endif /* CFG_CMD_I2C */
+#endif
 }

 #if defined(CONFIG_CMD_I2C)
@ -1408,4 +1408,4 @@ int i2c_read_multiple ( uchar chip, uint addr, int alen,
 	}
 	return (0);
 }
-#endif /* CFG_CMD_I2C */
+#endif
--- a/board/uc100/pcmcia.c
+++ b/board/uc100/pcmcia.c
@ -149,7 +149,7 @@ int pcmcia_hardware_disable(int slot)

 	return (0);
 }
-#endif	/* CFG_CMD_PCMCIA */
+#endif


 int pcmcia_voltage_set(int slot, int vcc, int vpp)
--- a/board/v38b/v38b.c
+++ b/board/v38b/v38b.c
@ -224,7 +224,7 @@ int board_early_init_r(void)
 }


-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
 void init_ide_reset(void)
 {
 	debug("init_ide_reset\n");
@ -248,7 +248,7 @@ void ide_set_reset(int idereset)
 	} else
 		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
 }
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif


 #ifdef CONFIG_HW_WATCHDOG
--- a/board/xilinx/ml300/serial.c
+++ b/board/xilinx/ml300/serial.c
@ -151,4 +151,4 @@ kgdb_interruptible(int yes)
 {
 	return;
 }
-#endif				/* CFG_CMD_KGDB */
+#endif