mirror of
https://github.com/Fishwaldo/u-boot.git
synced 2025-03-20 22:21:41 +00:00
doc: sifive: fu540: fix heading levels
Two sibling headings cannot have the same name. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
This commit is contained in:
parent
4f792d232d
commit
dd9abfec13
1 changed files with 11 additions and 8 deletions
|
@ -12,6 +12,7 @@ of running Linux.
|
||||||
|
|
||||||
Mainline support
|
Mainline support
|
||||||
----------------
|
----------------
|
||||||
|
|
||||||
The support for following drivers are already enabled:
|
The support for following drivers are already enabled:
|
||||||
|
|
||||||
1. SiFive UART Driver.
|
1. SiFive UART Driver.
|
||||||
|
@ -24,7 +25,7 @@ Booting from MMC using FSBL
|
||||||
---------------------------
|
---------------------------
|
||||||
|
|
||||||
Building
|
Building
|
||||||
--------
|
~~~~~~~~
|
||||||
|
|
||||||
1. Add the RISC-V toolchain to your PATH.
|
1. Add the RISC-V toolchain to your PATH.
|
||||||
2. Setup ARCH & cross compilation environment variable:
|
2. Setup ARCH & cross compilation environment variable:
|
||||||
|
@ -37,7 +38,7 @@ Building
|
||||||
4. make
|
4. make
|
||||||
|
|
||||||
Flashing
|
Flashing
|
||||||
--------
|
~~~~~~~~
|
||||||
|
|
||||||
The current U-Boot port is supported in S-mode only and loaded from DRAM.
|
The current U-Boot port is supported in S-mode only and loaded from DRAM.
|
||||||
|
|
||||||
|
@ -63,11 +64,12 @@ copied to the first partition of the sdcard.
|
||||||
sudo dd if=<prior_stage_firmware_binary> of=/dev/disk2s1 bs=1024
|
sudo dd if=<prior_stage_firmware_binary> of=/dev/disk2s1 bs=1024
|
||||||
|
|
||||||
Booting
|
Booting
|
||||||
-------
|
~~~~~~~
|
||||||
|
|
||||||
Once you plugin the sdcard and power up, you should see the U-Boot prompt.
|
Once you plugin the sdcard and power up, you should see the U-Boot prompt.
|
||||||
|
|
||||||
Sample boot log from HiFive Unleashed board
|
Sample boot log from HiFive Unleashed board
|
||||||
-------------------------------------------
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
.. code-block:: none
|
.. code-block:: none
|
||||||
|
|
||||||
|
@ -417,7 +419,7 @@ Booting from MMC using U-Boot SPL
|
||||||
---------------------------------
|
---------------------------------
|
||||||
|
|
||||||
Building
|
Building
|
||||||
--------
|
~~~~~~~~
|
||||||
|
|
||||||
Before building U-Boot SPL, OpenSBI must be built first. OpenSBI can be
|
Before building U-Boot SPL, OpenSBI must be built first. OpenSBI can be
|
||||||
cloned and built for FU540 as below:
|
cloned and built for FU540 as below:
|
||||||
|
@ -441,7 +443,7 @@ This will generate spl/u-boot-spl.bin and FIT image (u-boot.itb)
|
||||||
|
|
||||||
|
|
||||||
Flashing
|
Flashing
|
||||||
--------
|
~~~~~~~~
|
||||||
|
|
||||||
ZSBL loads the U-Boot SPL (u-boot-spl.bin) from a partition with GUID type
|
ZSBL loads the U-Boot SPL (u-boot-spl.bin) from a partition with GUID type
|
||||||
5B193300-FC78-40CD-8002-E86C45580B47
|
5B193300-FC78-40CD-8002-E86C45580B47
|
||||||
|
@ -471,11 +473,12 @@ Program the SD card
|
||||||
sudo dd if=u-boot.itb of=/dev/sda seek=2082
|
sudo dd if=u-boot.itb of=/dev/sda seek=2082
|
||||||
|
|
||||||
Booting
|
Booting
|
||||||
-------
|
~~~~~~~
|
||||||
|
|
||||||
Once you plugin the sdcard and power up, you should see the U-Boot prompt.
|
Once you plugin the sdcard and power up, you should see the U-Boot prompt.
|
||||||
|
|
||||||
Sample boot log from HiFive Unleashed board
|
Sample boot log from HiFive Unleashed board
|
||||||
-------------------------------------------
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
.. code-block:: none
|
.. code-block:: none
|
||||||
|
|
||||||
|
|
Loading…
Add table
Reference in a new issue