From dccff21312ad6725b21cb02cd9510a5b320db9ac Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 28 Apr 2018 13:36:00 +0800 Subject: [PATCH 1/7] sunxi: Disable R_I2C for Libre Computer Board ALL-H3-CC H3 ver. The Libre Computer Board ALL-H3-CC does not have an I2C controllable regulator. Having R_I2C and SPL_I2C enabled serves no purpose. Disable them. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Reviewed-by: Jagan Teki --- configs/libretech_all_h3_cc_h3_defconfig | 2 -- 1 file changed, 2 deletions(-) diff --git a/configs/libretech_all_h3_cc_h3_defconfig b/configs/libretech_all_h3_cc_h3_defconfig index 6072680e47..185facdf3e 100644 --- a/configs/libretech_all_h3_cc_h3_defconfig +++ b/configs/libretech_all_h3_cc_h3_defconfig @@ -5,10 +5,8 @@ CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=672 CONFIG_DRAM_ZQ=3881979 CONFIG_DRAM_ODT_EN=y -CONFIG_R_I2C_ENABLE=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-libretech-all-h3-cc" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set From d7b17f1c24afc8bd4e112b6736427e608e43acba Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 28 Apr 2018 13:36:01 +0800 Subject: [PATCH 2/7] sunxi: Split out common board design for ALL-H3-CC device tree The Libre Computer Project ALL-H3-CC has three models, all using the same board design, but with different pin compatible SoCs and amount of DRAM. Currently only the H3 1GB DRAM variant is supported. To support the two other variants, first split the original device tree into a common board design part and an SoC specific part. The SoC part only defines which SoC is used and model name, and includes the SoC specific dtsi file and the common design dtsi file. Also fix up the SPDX identifier line to use the correct comment style, and place it on the first line. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Reviewed-by: Jagan Teki --- arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts | 166 +---------------- arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi | 168 ++++++++++++++++++ 2 files changed, 170 insertions(+), 164 deletions(-) create mode 100644 arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi diff --git a/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts index c8fd69f0a4..50f2fb30d2 100644 --- a/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts +++ b/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts @@ -1,175 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2017 Chen-Yu Tsai - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; #include "sun8i-h3.dtsi" - -#include -#include +#include "sunxi-libretech-all-h3-cc.dtsi" / { model = "Libre Computer Board ALL-H3-CC H3"; compatible = "libretech,all-h3-cc-h3", "allwinner,sun8i-h3"; - - aliases { - ethernet0 = &emac; - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - pwr_led { - label = "librecomputer:green:pwr"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ - default-state = "on"; - }; - - status_led { - label = "librecomputer:blue:status"; - gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */ - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - - power { - label = "power"; - linux,code = ; - gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ - }; - }; - - reg_vcc1v2: vcc1v2 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v2"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <®_vcc5v0>; - gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ - enable-active-high; - }; - - reg_vcc3v3: vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <®_vcc5v0>; - }; - - /* This represents the board's 5V input */ - reg_vcc5v0: vcc5v0 { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_vcc_dram: vcc-dram { - compatible = "regulator-fixed"; - regulator-name = "vcc-dram"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <®_vcc5v0>; - gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ - enable-active-high; - }; - - reg_vcc_io: vcc-io { - compatible = "regulator-fixed"; - regulator-name = "vcc-io"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <®_vcc3v3>; - gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */ - }; - - reg_vdd_cpux: vdd-cpux { - compatible = "regulator-fixed"; - regulator-name = "vdd-cpux"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <®_vcc5v0>; - gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ - enable-active-high; - }; -}; - -&ehci1 { - status = "okay"; -}; - -&ehci2 { - status = "okay"; -}; - -&ehci3 { - status = "okay"; -}; - -&emac { - phy-handle = <&int_mii_phy>; - phy-mode = "mii"; - allwinner,leds-active-low; - status = "okay"; -}; - -&ir { - pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; - status = "okay"; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; - vmmc-supply = <®_vcc_io>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&ohci2 { - status = "okay"; -}; - -&ohci3 { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&usbphy { - /* VBUS on USB ports are always on */ - usb0_vbus-supply = <®_vcc5v0>; - usb1_vbus-supply = <®_vcc5v0>; - usb2_vbus-supply = <®_vcc5v0>; - usb3_vbus-supply = <®_vcc5v0>; - status = "okay"; }; diff --git a/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi new file mode 100644 index 0000000000..5d01bba180 --- /dev/null +++ b/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi @@ -0,0 +1,168 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2017 Chen-Yu Tsai + */ + +#include +#include + +/ { + aliases { + ethernet0 = &emac; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr_led { + label = "librecomputer:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + + status_led { + label = "librecomputer:blue:status"; + gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */ + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + power { + label = "power"; + linux,code = ; + gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + }; + }; + + reg_vcc1v2: vcc1v2 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc5v0>; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + enable-active-high; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_vcc5v0>; + }; + + /* This represents the board's 5V input */ + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_vcc_dram: vcc-dram { + compatible = "regulator-fixed"; + regulator-name = "vcc-dram"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc5v0>; + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + enable-active-high; + }; + + reg_vcc_io: vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc-io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc3v3>; + gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */ + }; + + reg_vdd_cpux: vdd-cpux { + compatible = "regulator-fixed"; + regulator-name = "vdd-cpux"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc5v0>; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + enable-active-high; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>; + vmmc-supply = <®_vcc_io>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + /* VBUS on USB ports are always on */ + usb0_vbus-supply = <®_vcc5v0>; + usb1_vbus-supply = <®_vcc5v0>; + usb2_vbus-supply = <®_vcc5v0>; + usb3_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; From ad349517083264b13bbfeccf4d79812637a7e30b Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 28 Apr 2018 13:36:02 +0800 Subject: [PATCH 3/7] sunxi: Add Libre Computer Board ALL-H3-CC H2+ ver. This patch adds a device tree file for the H2+ version of the Libre Computer Board ALL-H3-CC. It is the same board first introduced in commit afe27544125e ("sunxi: Add support for Libre Computer Board ALL-H3-CC H3 ver."), with the H3 SoC replaced with the H2+ SoC, and has only two 2Gb DDR3 chips instead of four. The device tree utilizes the common board design file for ALL-H3-CC, providing just the model strings and SoC specifics. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Reviewed-by: Jagan Teki --- arch/arm/dts/Makefile | 1 + .../arm/dts/sun8i-h2-plus-libretech-all-h3-cc.dts | 13 +++++++++++++ board/sunxi/MAINTAINERS | 3 ++- configs/libretech_all_h3_cc_h2_plus_defconfig | 15 +++++++++++++++ 4 files changed, 31 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/sun8i-h2-plus-libretech-all-h3-cc.dts create mode 100644 configs/libretech_all_h3_cc_h2_plus_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index ac7667b1e8..21e7bc1472 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -351,6 +351,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \ sun8i-a83t-cubietruck-plus.dtb \ sun8i-a83t-tbs-a711.dts dtb-$(CONFIG_MACH_SUN8I_H3) += \ + sun8i-h2-plus-libretech-all-h3-cc.dtb \ sun8i-h2-plus-orangepi-zero.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ sun8i-h3-libretech-all-h3-cc.dtb \ diff --git a/arch/arm/dts/sun8i-h2-plus-libretech-all-h3-cc.dts b/arch/arm/dts/sun8i-h2-plus-libretech-all-h3-cc.dts new file mode 100644 index 0000000000..4db0d4bb65 --- /dev/null +++ b/arch/arm/dts/sun8i-h2-plus-libretech-all-h3-cc.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Chen-Yu Tsai + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-libretech-all-h3-cc.dtsi" + +/ { + model = "Libre Computer Board ALL-H3-CC H2+"; + compatible = "libretech,all-h3-cc-h2-plus", "allwinner,sun8i-h2-plus"; +}; diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 6dd48c0265..4c21a2fedf 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -266,9 +266,10 @@ M: Siarhei Siamashka S: Maintained F: configs/MSI_Primo81_defconfig -LIBRETECH ALL-H3-CC H3 BOARD +LIBRETECH ALL-H3-CC BOARDS M: Chen-Yu Tsai S: Maintained +F: configs/libretech_all_h3_cc_h2_plus_defconfig F: configs/libretech_all_h3_cc_h3_defconfig NANOPI-M1 BOARD diff --git a/configs/libretech_all_h3_cc_h2_plus_defconfig b/configs/libretech_all_h3_cc_h2_plus_defconfig new file mode 100644 index 0000000000..0cbcd48aad --- /dev/null +++ b/configs/libretech_all_h3_cc_h2_plus_defconfig @@ -0,0 +1,15 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_SPL=y +CONFIG_MACH_SUN8I_H3=y +CONFIG_DRAM_CLK=672 +CONFIG_DRAM_ZQ=3881979 +CONFIG_DRAM_ODT_EN=y +CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-libretech-all-h3-cc" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_SUN8I_EMAC=y +CONFIG_USB_EHCI_HCD=y +CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y From e9392b373a81947812220b100249683fbc4ace1e Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 28 Apr 2018 13:36:03 +0800 Subject: [PATCH 4/7] sunxi: Add Libre Computer Board ALL-H3-CC H5 ver. This patch adds a device tree file for the H5 version of the Libre Computer Board ALL-H3-CC. It is the same board first introduced in commit afe27544125e ("sunxi: Add support for Libre Computer Board ALL-H3-CC H3 ver."), with the H3 SoC replaced with the H5 SoC, and has 4Gb DDR3 chips instead of 2Gb ones. The device tree utilizes the common board design file for ALL-H3-CC, providing just the model strings and SoC specifics. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Reviewed-by: Jagan Teki --- arch/arm/dts/Makefile | 1 + arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts | 13 +++++++++++++ board/sunxi/MAINTAINERS | 1 + configs/libretech_all_h3_cc_h5_defconfig | 15 +++++++++++++++ 4 files changed, 30 insertions(+) create mode 100644 arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts create mode 100644 configs/libretech_all_h3_cc_h5_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 21e7bc1472..482ece6112 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -371,6 +371,7 @@ dtb-$(CONFIG_MACH_SUN8I_R40) += \ dtb-$(CONFIG_MACH_SUN8I_V3S) += \ sun8i-v3s-licheepi-zero.dtb dtb-$(CONFIG_MACH_SUN50I_H5) += \ + sun50i-h5-libretech-all-h3-cc.dtb \ sun50i-h5-nanopi-neo2.dtb \ sun50i-h5-nanopi-neo-plus2.dtb \ sun50i-h5-orangepi-pc2.dtb \ diff --git a/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts new file mode 100644 index 0000000000..a7e53c5c26 --- /dev/null +++ b/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Chen-Yu Tsai + */ + +/dts-v1/; +#include "sun50i-h5.dtsi" +#include "sunxi-libretech-all-h3-cc.dtsi" + +/ { + model = "Libre Computer Board ALL-H3-CC H5"; + compatible = "libretech,all-h3-cc-h5", "allwinner,sun50i-h5"; +}; diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 4c21a2fedf..ba36a09f50 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -271,6 +271,7 @@ M: Chen-Yu Tsai S: Maintained F: configs/libretech_all_h3_cc_h2_plus_defconfig F: configs/libretech_all_h3_cc_h3_defconfig +F: configs/libretech_all_h3_cc_h5_defconfig NANOPI-M1 BOARD M: Mylène Josserand diff --git a/configs/libretech_all_h3_cc_h5_defconfig b/configs/libretech_all_h3_cc_h5_defconfig new file mode 100644 index 0000000000..061bddc8fd --- /dev/null +++ b/configs/libretech_all_h3_cc_h5_defconfig @@ -0,0 +1,15 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_SPL=y +CONFIG_MACH_SUN50I_H5=y +CONFIG_DRAM_CLK=672 +CONFIG_DRAM_ZQ=3881979 +CONFIG_DRAM_ODT_EN=y +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-libretech-all-h3-cc" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_SUN8I_EMAC=y +CONFIG_USB_EHCI_HCD=y +CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y From 9b9ceba03dbede48527c015c8d903b975e2d276d Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 28 Apr 2018 13:36:04 +0800 Subject: [PATCH 5/7] sunxi: Sort dts Makefile entries for H3 The dts Makefile entries for the H3 are not ordered correctly. Move the Nano Pi entries before the Orange Pi so they are. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Reviewed-by: Jagan Teki --- arch/arm/dts/Makefile | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 482ece6112..6745259a63 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -355,17 +355,17 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \ sun8i-h2-plus-orangepi-zero.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ sun8i-h3-libretech-all-h3-cc.dtb \ + sun8i-h3-nanopi-m1.dtb \ + sun8i-h3-nanopi-m1-plus.dtb \ + sun8i-h3-nanopi-neo.dtb \ + sun8i-h3-nanopi-neo-air.dtb \ sun8i-h3-orangepi-2.dtb \ sun8i-h3-orangepi-lite.dtb \ sun8i-h3-orangepi-one.dtb \ sun8i-h3-orangepi-pc.dtb \ sun8i-h3-orangepi-pc-plus.dtb \ sun8i-h3-orangepi-plus.dtb \ - sun8i-h3-orangepi-plus2e.dtb \ - sun8i-h3-nanopi-m1.dtb \ - sun8i-h3-nanopi-m1-plus.dtb \ - sun8i-h3-nanopi-neo.dtb \ - sun8i-h3-nanopi-neo-air.dtb + sun8i-h3-orangepi-plus2e.dtb dtb-$(CONFIG_MACH_SUN8I_R40) += \ sun8i-r40-bananapi-m2-ultra.dtb dtb-$(CONFIG_MACH_SUN8I_V3S) += \ From 842cc8e0949100b4d51185f30d1550d8f3aa23d2 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Fri, 27 Apr 2018 17:33:41 +0530 Subject: [PATCH 6/7] ARM: dts: sun8i: Sync r40 dtsi from Linux Sync sun8i-r40.dtsi changes from Linux with Merge: a406778618d0 088345fc3553 Author: Stephen Rothwell Date: Tue Apr 24 14:15:02 2018 +1000 Merge branch 'akpm/master' Signed-off-by: Jagan Teki --- arch/arm/dts/sun8i-r40.dtsi | 43 +++++ include/dt-bindings/clock/sun8i-r40-ccu.h | 187 ++++++++++++++++++++++ include/dt-bindings/reset/sun8i-r40-ccu.h | 130 +++++++++++++++ 3 files changed, 360 insertions(+) create mode 100644 include/dt-bindings/clock/sun8i-r40-ccu.h create mode 100644 include/dt-bindings/reset/sun8i-r40-ccu.h diff --git a/arch/arm/dts/sun8i-r40.dtsi b/arch/arm/dts/sun8i-r40.dtsi index 48ec2e855a..0aa76a2f10 100644 --- a/arch/arm/dts/sun8i-r40.dtsi +++ b/arch/arm/dts/sun8i-r40.dtsi @@ -43,6 +43,8 @@ */ #include +#include +#include / { #address-cells = <1>; @@ -114,6 +116,39 @@ #size-cells = <1>; ranges; + nmi_intc: interrupt-controller@1c00030 { + compatible = "allwinner,sun7i-a20-sc-nmi"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x01c00030 0x0c>; + interrupts = ; + }; + + mmc0: mmc@1c0f000 { + compatible = "allwinner,sun8i-r40-mmc", + "allwinner,sun50i-a64-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC0>; + reset-names = "ahb"; + pinctrl-0 = <&mmc0_pins>; + pinctrl-names = "default"; + interrupts = ; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + ccu: clock@1c20000 { + compatible = "allwinner,sun8i-r40-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + pio: pinctrl@1c20800 { compatible = "allwinner,sun8i-r40-pinctrl"; reg = <0x01c20800 0x400>; @@ -132,6 +167,14 @@ bias-pull-up; }; + mmc0_pins: mmc0-pins { + pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; + }; + uart0_pb_pins: uart0_pb_pins { pins = "PB22", "PB23"; function = "uart0"; diff --git a/include/dt-bindings/clock/sun8i-r40-ccu.h b/include/dt-bindings/clock/sun8i-r40-ccu.h new file mode 100644 index 0000000000..4fa5f69fc2 --- /dev/null +++ b/include/dt-bindings/clock/sun8i-r40-ccu.h @@ -0,0 +1,187 @@ +/* + * Copyright (C) 2017 Icenowy Zheng + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_CLK_SUN8I_R40_H_ +#define _DT_BINDINGS_CLK_SUN8I_R40_H_ + +#define CLK_CPU 24 + +#define CLK_BUS_MIPI_DSI 29 +#define CLK_BUS_CE 30 +#define CLK_BUS_DMA 31 +#define CLK_BUS_MMC0 32 +#define CLK_BUS_MMC1 33 +#define CLK_BUS_MMC2 34 +#define CLK_BUS_MMC3 35 +#define CLK_BUS_NAND 36 +#define CLK_BUS_DRAM 37 +#define CLK_BUS_EMAC 38 +#define CLK_BUS_TS 39 +#define CLK_BUS_HSTIMER 40 +#define CLK_BUS_SPI0 41 +#define CLK_BUS_SPI1 42 +#define CLK_BUS_SPI2 43 +#define CLK_BUS_SPI3 44 +#define CLK_BUS_SATA 45 +#define CLK_BUS_OTG 46 +#define CLK_BUS_EHCI0 47 +#define CLK_BUS_EHCI1 48 +#define CLK_BUS_EHCI2 49 +#define CLK_BUS_OHCI0 50 +#define CLK_BUS_OHCI1 51 +#define CLK_BUS_OHCI2 52 +#define CLK_BUS_VE 53 +#define CLK_BUS_MP 54 +#define CLK_BUS_DEINTERLACE 55 +#define CLK_BUS_CSI0 56 +#define CLK_BUS_CSI1 57 +#define CLK_BUS_HDMI1 58 +#define CLK_BUS_HDMI0 59 +#define CLK_BUS_DE 60 +#define CLK_BUS_TVE0 61 +#define CLK_BUS_TVE1 62 +#define CLK_BUS_TVE_TOP 63 +#define CLK_BUS_GMAC 64 +#define CLK_BUS_GPU 65 +#define CLK_BUS_TVD0 66 +#define CLK_BUS_TVD1 67 +#define CLK_BUS_TVD2 68 +#define CLK_BUS_TVD3 69 +#define CLK_BUS_TVD_TOP 70 +#define CLK_BUS_TCON_LCD0 71 +#define CLK_BUS_TCON_LCD1 72 +#define CLK_BUS_TCON_TV0 73 +#define CLK_BUS_TCON_TV1 74 +#define CLK_BUS_TCON_TOP 75 +#define CLK_BUS_CODEC 76 +#define CLK_BUS_SPDIF 77 +#define CLK_BUS_AC97 78 +#define CLK_BUS_PIO 79 +#define CLK_BUS_IR0 80 +#define CLK_BUS_IR1 81 +#define CLK_BUS_THS 82 +#define CLK_BUS_KEYPAD 83 +#define CLK_BUS_I2S0 84 +#define CLK_BUS_I2S1 85 +#define CLK_BUS_I2S2 86 +#define CLK_BUS_I2C0 87 +#define CLK_BUS_I2C1 88 +#define CLK_BUS_I2C2 89 +#define CLK_BUS_I2C3 90 +#define CLK_BUS_CAN 91 +#define CLK_BUS_SCR 92 +#define CLK_BUS_PS20 93 +#define CLK_BUS_PS21 94 +#define CLK_BUS_I2C4 95 +#define CLK_BUS_UART0 96 +#define CLK_BUS_UART1 97 +#define CLK_BUS_UART2 98 +#define CLK_BUS_UART3 99 +#define CLK_BUS_UART4 100 +#define CLK_BUS_UART5 101 +#define CLK_BUS_UART6 102 +#define CLK_BUS_UART7 103 +#define CLK_BUS_DBG 104 + +#define CLK_THS 105 +#define CLK_NAND 106 +#define CLK_MMC0 107 +#define CLK_MMC1 108 +#define CLK_MMC2 109 +#define CLK_MMC3 110 +#define CLK_TS 111 +#define CLK_CE 112 +#define CLK_SPI0 113 +#define CLK_SPI1 114 +#define CLK_SPI2 115 +#define CLK_SPI3 116 +#define CLK_I2S0 117 +#define CLK_I2S1 118 +#define CLK_I2S2 119 +#define CLK_AC97 120 +#define CLK_SPDIF 121 +#define CLK_KEYPAD 122 +#define CLK_SATA 123 +#define CLK_USB_PHY0 124 +#define CLK_USB_PHY1 125 +#define CLK_USB_PHY2 126 +#define CLK_USB_OHCI0 127 +#define CLK_USB_OHCI1 128 +#define CLK_USB_OHCI2 129 +#define CLK_IR0 130 +#define CLK_IR1 131 + +#define CLK_DRAM_VE 133 +#define CLK_DRAM_CSI0 134 +#define CLK_DRAM_CSI1 135 +#define CLK_DRAM_TS 136 +#define CLK_DRAM_TVD 137 +#define CLK_DRAM_MP 138 +#define CLK_DRAM_DEINTERLACE 139 +#define CLK_DE 140 +#define CLK_MP 141 +#define CLK_TCON_LCD0 142 +#define CLK_TCON_LCD1 143 +#define CLK_TCON_TV0 144 +#define CLK_TCON_TV1 145 +#define CLK_DEINTERLACE 146 +#define CLK_CSI1_MCLK 147 +#define CLK_CSI_SCLK 148 +#define CLK_CSI0_MCLK 149 +#define CLK_VE 150 +#define CLK_CODEC 151 +#define CLK_AVS 152 +#define CLK_HDMI 153 +#define CLK_HDMI_SLOW 154 + +#define CLK_DSI_DPHY 156 +#define CLK_TVE0 157 +#define CLK_TVE1 158 +#define CLK_TVD0 159 +#define CLK_TVD1 160 +#define CLK_TVD2 161 +#define CLK_TVD3 162 +#define CLK_GPU 163 +#define CLK_OUTA 164 +#define CLK_OUTB 165 + +#endif /* _DT_BINDINGS_CLK_SUN8I_R40_H_ */ diff --git a/include/dt-bindings/reset/sun8i-r40-ccu.h b/include/dt-bindings/reset/sun8i-r40-ccu.h new file mode 100644 index 0000000000..c5ebcf6672 --- /dev/null +++ b/include/dt-bindings/reset/sun8i-r40-ccu.h @@ -0,0 +1,130 @@ +/* + * Copyright (C) 2017 Icenowy Zheng + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_RST_SUN8I_R40_H_ +#define _DT_BINDINGS_RST_SUN8I_R40_H_ + +#define RST_USB_PHY0 0 +#define RST_USB_PHY1 1 +#define RST_USB_PHY2 2 + +#define RST_DRAM 3 +#define RST_MBUS 4 + +#define RST_BUS_MIPI_DSI 5 +#define RST_BUS_CE 6 +#define RST_BUS_DMA 7 +#define RST_BUS_MMC0 8 +#define RST_BUS_MMC1 9 +#define RST_BUS_MMC2 10 +#define RST_BUS_MMC3 11 +#define RST_BUS_NAND 12 +#define RST_BUS_DRAM 13 +#define RST_BUS_EMAC 14 +#define RST_BUS_TS 15 +#define RST_BUS_HSTIMER 16 +#define RST_BUS_SPI0 17 +#define RST_BUS_SPI1 18 +#define RST_BUS_SPI2 19 +#define RST_BUS_SPI3 20 +#define RST_BUS_SATA 21 +#define RST_BUS_OTG 22 +#define RST_BUS_EHCI0 23 +#define RST_BUS_EHCI1 24 +#define RST_BUS_EHCI2 25 +#define RST_BUS_OHCI0 26 +#define RST_BUS_OHCI1 27 +#define RST_BUS_OHCI2 28 +#define RST_BUS_VE 29 +#define RST_BUS_MP 30 +#define RST_BUS_DEINTERLACE 31 +#define RST_BUS_CSI0 32 +#define RST_BUS_CSI1 33 +#define RST_BUS_HDMI0 34 +#define RST_BUS_HDMI1 35 +#define RST_BUS_DE 36 +#define RST_BUS_TVE0 37 +#define RST_BUS_TVE1 38 +#define RST_BUS_TVE_TOP 39 +#define RST_BUS_GMAC 40 +#define RST_BUS_GPU 41 +#define RST_BUS_TVD0 42 +#define RST_BUS_TVD1 43 +#define RST_BUS_TVD2 44 +#define RST_BUS_TVD3 45 +#define RST_BUS_TVD_TOP 46 +#define RST_BUS_TCON_LCD0 47 +#define RST_BUS_TCON_LCD1 48 +#define RST_BUS_TCON_TV0 49 +#define RST_BUS_TCON_TV1 50 +#define RST_BUS_TCON_TOP 51 +#define RST_BUS_DBG 52 +#define RST_BUS_LVDS 53 +#define RST_BUS_CODEC 54 +#define RST_BUS_SPDIF 55 +#define RST_BUS_AC97 56 +#define RST_BUS_IR0 57 +#define RST_BUS_IR1 58 +#define RST_BUS_THS 59 +#define RST_BUS_KEYPAD 60 +#define RST_BUS_I2S0 61 +#define RST_BUS_I2S1 62 +#define RST_BUS_I2S2 63 +#define RST_BUS_I2C0 64 +#define RST_BUS_I2C1 65 +#define RST_BUS_I2C2 66 +#define RST_BUS_I2C3 67 +#define RST_BUS_CAN 68 +#define RST_BUS_SCR 69 +#define RST_BUS_PS20 70 +#define RST_BUS_PS21 71 +#define RST_BUS_I2C4 72 +#define RST_BUS_UART0 73 +#define RST_BUS_UART1 74 +#define RST_BUS_UART2 75 +#define RST_BUS_UART3 76 +#define RST_BUS_UART4 77 +#define RST_BUS_UART5 78 +#define RST_BUS_UART6 79 +#define RST_BUS_UART7 80 + +#endif /* _DT_BINDINGS_RST_SUN8I_R40_H_ */ From f3df7758b5fb4e1f8eb8f2bbd9b9354054884502 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Fri, 27 Apr 2018 17:33:42 +0530 Subject: [PATCH 7/7] board: sunxi: sun8i-v40: Add Bananapi M2 Berry support Banana Pi BPI-M2 Berry is a quad-core mini single board computer built with Allwinner V40 SoC. It features - Quad Core ARM Cortex A7 CPU V40 - 1GB of RAM . - microSD/SATA port.. - onboard WiFi and BT - 4 USB A 2.0 ports - 1 USB OTG port - 1 HDMI port - 1 audio jack - DC power port Signed-off-by: Jagan Teki Acked-by: Maxime Ripard --- arch/arm/dts/Makefile | 3 +- arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts | 132 +++++++++++++++++++ board/sunxi/MAINTAINERS | 5 + configs/bananapi_m2_berry_defconfig | 14 ++ 4 files changed, 153 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts create mode 100644 configs/bananapi_m2_berry_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 6745259a63..e65b03e271 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -367,7 +367,8 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \ sun8i-h3-orangepi-plus.dtb \ sun8i-h3-orangepi-plus2e.dtb dtb-$(CONFIG_MACH_SUN8I_R40) += \ - sun8i-r40-bananapi-m2-ultra.dtb + sun8i-r40-bananapi-m2-ultra.dtb \ + sun8i-v40-bananapi-m2-berry.dtb dtb-$(CONFIG_MACH_SUN8I_V3S) += \ sun8i-v3s-licheepi-zero.dtb dtb-$(CONFIG_MACH_SUN50I_H5) += \ diff --git a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts new file mode 100644 index 0000000000..193d9b29ec --- /dev/null +++ b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts @@ -0,0 +1,132 @@ +/* + * Copyright (C) 2017 Icenowy Zheng + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-r40.dtsi" + +#include + +/ { + model = "Banana Pi M2 Berry"; + compatible = "sinovoip,bpi-m2-berry", "allwinner,sun8i-r40"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&i2c0 { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-io"; +}; + +®_dldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +&mmc0 { + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index ba36a09f50..1bb2fa8f51 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -126,6 +126,11 @@ M: Jagan Teki S: Maintained F: configs/bananapi_m1_plus_defconfig +BANANAPI M2 BERRY +M: Jagan Teki +S: Maintained +F: configs/bananapi_m2_berry_defconfig + BANANAPI M2 ULTRA BOARD M: Chen-Yu Tsai S: Maintained diff --git a/configs/bananapi_m2_berry_defconfig b/configs/bananapi_m2_berry_defconfig new file mode 100644 index 0000000000..9d75108d04 --- /dev/null +++ b/configs/bananapi_m2_berry_defconfig @@ -0,0 +1,14 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_SPL=y +CONFIG_MACH_SUN8I_R40=y +CONFIG_DRAM_CLK=576 +CONFIG_DRAM_ZQ=3881979 +CONFIG_DRAM_ODT_EN=y +CONFIG_MMC0_CD_PIN="PH13" +CONFIG_DEFAULT_DEVICE_TREE="sun8i-v40-bananapi-m2-berry" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_I2C_SUPPORT=y +# CONFIG_CMD_FLASH is not set +CONFIG_AXP_DLDO4_VOLT=2500 +CONFIG_AXP_ELDO3_VOLT=1200