Merge git://git.denx.de/u-boot-uniphier

- Add workaround code to make LD20 SoC boot from ARM Trusted Firmware
- Sync DT with Linux to fix DTC warnings
- Add new SoC support code
- Misc fix, updates

arch/arm/dts/uniphier-ld11.dtsi

@@ -273,7 +273,7 @@
 			pinctrl-0 = <&pinctrl_system_bus>;
 		};
 
-		smpctrl@59800000 {
+		smpctrl@59801000 {
 			compatible = "socionext,uniphier-smpctrl";
 			reg = <0x59801000 0x400>;
 		};

arch/arm/dts/uniphier-ld20.dtsi

@@ -342,7 +342,7 @@
 			pinctrl-0 = <&pinctrl_system_bus>;
 		};
 
-		smpctrl@59800000 {
+		smpctrl@59801000 {
 			compatible = "socionext,uniphier-smpctrl";
 			reg = <0x59801000 0x400>;
 		};

arch/arm/dts/uniphier-ld4.dtsi

@@ -4,7 +4,43 @@
  * Copyright (C) 2015-2016 Socionext Inc.
  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
- * SPDX-License-Identifier:	GPL-2.0+	X11
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 / {
@@ -282,7 +318,7 @@
 			pinctrl-0 = <&pinctrl_system_bus>;
 		};
 
-		smpctrl@59800000 {
+		smpctrl@59801000 {
 			compatible = "socionext,uniphier-smpctrl";
 			reg = <0x59801000 0x400>;
 		};
@@ -446,7 +482,7 @@
 		};
 
 		nand: nand@68000000 {
-			compatible = "socionext,denali-nand-v5a";
+			compatible = "socionext,uniphier-denali-nand-v5a";
 			status = "disabled";
 			reg-names = "nand_data", "denali_reg";
 			reg = <0x68000000 0x20>, <0x68100000 0x1000>;

arch/arm/dts/uniphier-pro4.dtsi

@@ -4,7 +4,43 @@
  * Copyright (C) 2015-2016 Socionext Inc.
  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
- * SPDX-License-Identifier:	GPL-2.0+	X11
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 / {
@@ -405,7 +441,7 @@
 			pinctrl-0 = <&pinctrl_system_bus>;
 		};
 
-		smpctrl@59800000 {
+		smpctrl@59801000 {
 			compatible = "socionext,uniphier-smpctrl";
 			reg = <0x59801000 0x400>;
 		};
@@ -609,7 +645,7 @@
 		};
 
 		nand: nand@68000000 {
-			compatible = "socionext,denali-nand-v5a";
+			compatible = "socionext,uniphier-denali-nand-v5a";
 			status = "disabled";
 			reg-names = "nand_data", "denali_reg";
 			reg = <0x68000000 0x20>, <0x68100000 0x1000>;

arch/arm/dts/uniphier-pro5.dtsi

@@ -528,7 +528,7 @@
 			pinctrl-0 = <&pinctrl_system_bus>;
 		};
 
-		smpctrl@59800000 {
+		smpctrl@59801000 {
 			compatible = "socionext,uniphier-smpctrl";
 			reg = <0x59801000 0x400>;
 		};

arch/arm/dts/uniphier-pxs2.dtsi

@@ -505,7 +505,7 @@
 			pinctrl-0 = <&pinctrl_system_bus>;
 		};
 
-		smpctrl@59800000 {
+		smpctrl@59801000 {
 			compatible = "socionext,uniphier-smpctrl";
 			reg = <0x59801000 0x400>;
 		};

arch/arm/dts/uniphier-pxs3.dtsi

@@ -4,7 +4,43 @@
  * Copyright (C) 2017 Socionext Inc.
  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
- * SPDX-License-Identifier:	GPL-2.0+	X11
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /memreserve/ 0x80000000 0x00080000;
@@ -207,7 +243,7 @@
 			pinctrl-0 = <&pinctrl_system_bus>;
 		};
 
-		smpctrl@59800000 {
+		smpctrl@59801000 {
 			compatible = "socionext,uniphier-smpctrl";
 			reg = <0x59801000 0x400>;
 		};

arch/arm/dts/uniphier-sld3.dtsi

@@ -4,7 +4,43 @@
  * Copyright (C) 2015-2016 Socionext Inc.
  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
- * SPDX-License-Identifier:	GPL-2.0+	X11
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 / {
@@ -304,7 +340,7 @@
 			#size-cells = <1>;
 		};
 
-		smpctrl@59800000 {
+		smpctrl@59801000 {
 			compatible = "socionext,uniphier-smpctrl";
 			reg = <0x59801000 0x400>;
 		};
@@ -444,7 +480,7 @@
 		};
 
 		nand: nand@f8000000 {
-			compatible = "socionext,denali-nand-v5a";
+			compatible = "socionext,uniphier-denali-nand-v5a";
 			status = "disabled";
 			reg-names = "nand_data", "denali_reg";
 			reg = <0xf8000000 0x20>, <0xf8100000 0x1000>;

arch/arm/dts/uniphier-sld8.dtsi

@@ -4,7 +4,43 @@
  * Copyright (C) 2015-2016 Socionext Inc.
  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
- * SPDX-License-Identifier:	GPL-2.0+	X11
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 / {
@@ -282,7 +318,7 @@
 			pinctrl-0 = <&pinctrl_system_bus>;
 		};
 
-		smpctrl@59800000 {
+		smpctrl@59801000 {
 			compatible = "socionext,uniphier-smpctrl";
 			reg = <0x59801000 0x400>;
 		};
@@ -446,7 +482,7 @@
 		};
 
 		nand: nand@68000000 {
-			compatible = "socionext,denali-nand-v5a";
+			compatible = "socionext,uniphier-denali-nand-v5a";
 			status = "disabled";
 			reg-names = "nand_data", "denali_reg";
 			reg = <0x68000000 0x20>, <0x68100000 0x1000>;

arch/arm/dts/uniphier-support-card.dtsi

@@ -4,7 +4,43 @@
  * Copyright (C) 2015-2017 Socionext Inc.
  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
- * SPDX-License-Identifier:	GPL-2.0+	X11
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 &system_bus {
@@ -17,14 +53,14 @@
 		#size-cells = <1>;
 		ranges = <0x00000000 1 0x01f00000 0x00100000>;
 
-		ethsc: ethernet@00000000 {
+		ethsc: ethernet@0 {
 			compatible = "smsc,lan9118", "smsc,lan9115";
 			reg = <0x00000000 0x1000>;
 			phy-mode = "mii";
 			reg-io-width = <4>;
 		};
 
-		serialsc: uart@000b0000 {
+		serialsc: uart@b0000 {
 			compatible = "ns16550a";
 			reg = <0x000b0000 0x20>;
 			clock-frequency = <12288000>;

arch/arm/mach-uniphier/arm64/Makefile

@@ -9,5 +9,7 @@ obj-y += mem_map.o
 ifdef CONFIG_ARMV8_MULTIENTRY
 obj-y += smp.o smp_kick_cpus.o
 obj-$(CONFIG_ARCH_UNIPHIER_LD20) += arm-cci500.o
+else
+obj-$(CONFIG_ARCH_UNIPHIER_LD20) += lowlevel_init.o
 endif
 endif

arch/arm/mach-uniphier/arm64/lowlevel_init.S

@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2017 Socionext Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+	/* LD20 needs the following code to boot.  I do not know why. */
+	mrs	x0, sctlr_el1
+	msr	sctlr_el1, x0
+	ret
+ENDPROC(lowlevel_init)

arch/arm/mach-uniphier/board_init.c

@@ -175,6 +175,7 @@ static const struct uniphier_initdata uniphier_initdata[] = {
 		.nand_2cs = false,
 		.sbc_init = uniphier_pxs2_sbc_init,
 		.pll_init = uniphier_pxs3_pll_init,
+		.clk_init = uniphier_pxs3_clk_init,
 	},
 #endif
 };

arch/arm/mach-uniphier/boot-device/Makefile

@@ -13,6 +13,7 @@ obj-$(CONFIG_ARCH_UNIPHIER_PXS2)	+= boot-device-pxs2.o
 obj-$(CONFIG_ARCH_UNIPHIER_LD6B)	+= boot-device-pxs2.o
 obj-$(CONFIG_ARCH_UNIPHIER_LD11)	+= boot-device-ld11.o
 obj-$(CONFIG_ARCH_UNIPHIER_LD20)	+= boot-device-ld11.o
+obj-$(CONFIG_ARCH_UNIPHIER_PXS3)	+= boot-device-pxs3.o
 
 ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_SPL_BOARD_LOAD_IMAGE)	+= spl_board.o

arch/arm/mach-uniphier/boot-device/boot-device-pxs3.c

@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2017 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include "../sg-regs.h"
+#include "boot-device.h"
+
+const struct uniphier_boot_device uniphier_pxs3_boot_device_table[] = {
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 128KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 256KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 512KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, ONFI,            Addr 5)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI,            Addr 5)"},
+	{BOOT_DEVICE_MMC1, "eMMC (Legacy,         4bit, 1.8V, Training Off)"},
+	{BOOT_DEVICE_MMC1, "eMMC (Legacy,         4bit, 1.8V, Training On)"},
+	{BOOT_DEVICE_MMC1, "eMMC (Legacy,         8bit, 1.8V, Training Off)"},
+	{BOOT_DEVICE_MMC1, "eMMC (Legacy,         8bit, 1.8V, Training On)"},
+	{BOOT_DEVICE_MMC1, "eMMC (High Speed SDR, 8bit, 1.8V, Training Off)"},
+	{BOOT_DEVICE_MMC1, "eMMC (High Speed SDR, 8bit, 1.8V, Training On)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, ONFI,            Addr 5, BBM Last Page)"},
+	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI,            Addr 5, BBM Last Page)"},
+};
+
+const unsigned uniphier_pxs3_boot_device_count =
+				ARRAY_SIZE(uniphier_pxs3_boot_device_table);
+
+int uniphier_pxs3_boot_device_is_usb(u32 pinmon)
+{
+	return !!(readl(SG_PINMON2) & BIT(31));
+}

arch/arm/mach-uniphier/boot-device/boot-device.c

@@ -115,6 +115,16 @@ static const struct uniphier_boot_device_info uniphier_boot_device_info[] = {
 		.have_internal_stm = 1,
 	},
 #endif
+#if defined(CONFIG_ARCH_UNIPHIER_PXS3)
+	{
+		.soc_id = UNIPHIER_PXS3_ID,
+		.boot_device_sel_shift = 1,
+		.boot_device_table = uniphier_pxs3_boot_device_table,
+		.boot_device_count = &uniphier_pxs3_boot_device_count,
+		.boot_device_is_usb = uniphier_pxs3_boot_device_is_usb,
+		.have_internal_stm = 0,
+	},
+#endif
 };
 UNIPHIER_DEFINE_SOCDATA_FUNC(uniphier_get_boot_device_info,
 			     uniphier_boot_device_info)

arch/arm/mach-uniphier/boot-device/boot-device.h

@@ -18,16 +18,19 @@ extern const struct uniphier_boot_device uniphier_ld4_boot_device_table[];
 extern const struct uniphier_boot_device uniphier_pro5_boot_device_table[];
 extern const struct uniphier_boot_device uniphier_pxs2_boot_device_table[];
 extern const struct uniphier_boot_device uniphier_ld11_boot_device_table[];
+extern const struct uniphier_boot_device uniphier_pxs3_boot_device_table[];
 
 extern const unsigned int uniphier_sld3_boot_device_count;
 extern const unsigned int uniphier_ld4_boot_device_count;
 extern const unsigned int uniphier_pro5_boot_device_count;
 extern const unsigned int uniphier_pxs2_boot_device_count;
 extern const unsigned int uniphier_ld11_boot_device_count;
+extern const unsigned int uniphier_pxs3_boot_device_count;
 
 int uniphier_pxs2_boot_device_is_usb(u32 pinmon);
 int uniphier_ld11_boot_device_is_usb(u32 pinmon);
 int uniphier_ld20_boot_device_is_usb(u32 pinmon);
+int uniphier_pxs3_boot_device_is_usb(u32 pinmon);
 
 unsigned int uniphier_pxs2_boot_device_fixup(unsigned int mode);
 unsigned int uniphier_ld11_boot_device_fixup(unsigned int mode);

arch/arm/mach-uniphier/clk/Makefile

@@ -25,7 +25,7 @@ obj-$(CONFIG_ARCH_UNIPHIER_PXS2)	+= clk-pxs2.o
 obj-$(CONFIG_ARCH_UNIPHIER_LD6B)	+= clk-pxs2.o
 obj-$(CONFIG_ARCH_UNIPHIER_LD11)	+= clk-ld11.o pll-ld11.o
 obj-$(CONFIG_ARCH_UNIPHIER_LD20)	+= clk-ld20.o pll-ld20.o
-obj-$(CONFIG_ARCH_UNIPHIER_PXS3)	+= pll-pxs3.o
+obj-$(CONFIG_ARCH_UNIPHIER_PXS3)	+= clk-pxs3.o pll-pxs3.o
 
 endif
 

arch/arm/mach-uniphier/clk/clk-pxs3.c

@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2017 Socionext Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <linux/io.h>
+
+#include "../init.h"
+
+#define SDCTRL_EMMC_HW_RESET	0x59810280
+
+void uniphier_pxs3_clk_init(void)
+{
+	/* TODO: use "mmc-pwrseq-emmc" */
+	writel(1, SDCTRL_EMMC_HW_RESET);
+}

arch/arm/mach-uniphier/init.h

@@ -119,6 +119,7 @@ void uniphier_pro5_clk_init(void);
 void uniphier_pxs2_clk_init(void);
 void uniphier_ld11_clk_init(void);
 void uniphier_ld20_clk_init(void);
+void uniphier_pxs3_clk_init(void);
 
 unsigned int uniphier_boot_device_raw(void);
 int uniphier_have_internal_stm(void);

arch/arm/mach-uniphier/sg-regs.h

@@ -70,6 +70,7 @@
 
 /* Pin Monitor */
 #define SG_PINMON0			(SG_DBG_BASE | 0x0100)
+#define SG_PINMON2			(SG_DBG_BASE | 0x0108)
 
 #define SG_PINMON0_CLK_MODE_UPLLSRC_MASK	(0x3 << 19)
 #define SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT	(0x0 << 19)

arch/arm/mach-uniphier/soc-info.c

@@ -26,7 +26,7 @@ unsigned int uniphier_get_soc_id(void)
 
 unsigned int uniphier_get_soc_model(void)
 {
-	return __uniphier_get_revision_field(0x3, 8);
+	return __uniphier_get_revision_field(0x7, 8);
 }
 
 unsigned int uniphier_get_soc_revision(void)

include/configs/uniphier.h

@@ -176,7 +176,7 @@
 #define CONFIG_BOOTFILE			"Image.gz"
 #define LINUXBOOT_CMD			"booti"
 #define KERNEL_ADDR_LOAD		"kernel_addr_load=0x84200000\0"
-#define KERNEL_ADDR_R			"kernel_addr_r=0x80080000\0"
+#define KERNEL_ADDR_R			"kernel_addr_r=0x82080000\0"
 #else
 #define CONFIG_BOOTFILE			"zImage"
 #define LINUXBOOT_CMD			"bootz"
@@ -246,6 +246,11 @@
 		"nand write $loadaddr 0 0x00020000 && " \
 		"tftpboot $third_image && " \
 		"nand write $loadaddr 0x00020000 0x000e0000\0" \
+	"usbupdate=usb start &&" \
+		"tftpboot $second_image && " \
+		"usb write $loadaddr 0 100 && " \
+		"tftpboot $third_image && " \
+		"usb write $loadaddr 100 700\0" \
 	BOOT_IMAGES \
 	LINUXBOOT_ENV_SETTINGS