mirror of
https://github.com/Fishwaldo/u-boot.git
synced 2025-03-27 17:41:34 +00:00
7d47cee2cc
The POST ethernet test needed to be changed to dynamically determine the count of ethernet devices. This code is cloned from the 4xx ethernet driver. Signed-off-by: Stefan Roese <sr@denx.de>
424 lines
10 KiB
C
424 lines
10 KiB
C
/*
|
|
* (C) Copyright 2007
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* Author: Igor Lisitsin <igor@emcraft.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
/*
|
|
* Ethernet test
|
|
*
|
|
* The Ethernet Media Access Controllers (EMAC) are tested in the
|
|
* internal loopback mode.
|
|
* The controllers are configured accordingly and several packets
|
|
* are transmitted. The configurable test parameters are:
|
|
* MIN_PACKET_LENGTH - minimum size of packet to transmit
|
|
* MAX_PACKET_LENGTH - maximum size of packet to transmit
|
|
* TEST_NUM - number of tests
|
|
*/
|
|
|
|
#ifdef CONFIG_POST
|
|
|
|
#include <post.h>
|
|
|
|
#if CONFIG_POST & CFG_POST_ETHER
|
|
|
|
#include <asm/cache.h>
|
|
#include <asm/io.h>
|
|
#include <asm/processor.h>
|
|
#include <405_mal.h>
|
|
#include <ppc4xx_enet.h>
|
|
#include <malloc.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* Get count of EMAC devices (doesn't have to be the max. possible number
|
|
* supported by the cpu)
|
|
*
|
|
* CONFIG_BOARD_EMAC_COUNT added so now a "dynamic" way to configure the
|
|
* EMAC count is possible. As it is needed for the Kilauea/Haleakala
|
|
* 405EX/405EXr eval board, using the same binary.
|
|
*/
|
|
#if defined(CONFIG_BOARD_EMAC_COUNT)
|
|
#define LAST_EMAC_NUM board_emac_count()
|
|
#else /* CONFIG_BOARD_EMAC_COUNT */
|
|
#if defined(CONFIG_HAS_ETH3)
|
|
#define LAST_EMAC_NUM 4
|
|
#elif defined(CONFIG_HAS_ETH2)
|
|
#define LAST_EMAC_NUM 3
|
|
#elif defined(CONFIG_HAS_ETH1)
|
|
#define LAST_EMAC_NUM 2
|
|
#else
|
|
#define LAST_EMAC_NUM 1
|
|
#endif
|
|
#endif /* CONFIG_BOARD_EMAC_COUNT */
|
|
|
|
#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
|
|
#define SDR0_MFR_ETH_CLK_SEL_V(n) ((0x01<<27) / (n+1))
|
|
#endif
|
|
|
|
#define MIN_PACKET_LENGTH 64
|
|
#define MAX_PACKET_LENGTH 256
|
|
#define TEST_NUM 1
|
|
|
|
static volatile mal_desc_t tx __cacheline_aligned;
|
|
static volatile mal_desc_t rx __cacheline_aligned;
|
|
static char *tx_buf;
|
|
static char *rx_buf;
|
|
|
|
int board_emac_count(void);
|
|
|
|
static void ether_post_init (int devnum, int hw_addr)
|
|
{
|
|
int i;
|
|
#if defined(CONFIG_440GX) || \
|
|
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
|
|
defined(CONFIG_440SP) || defined(CONFIG_440SPE)
|
|
unsigned mode_reg;
|
|
sys_info_t sysinfo;
|
|
#endif
|
|
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || defined(CONFIG_440SPE)
|
|
unsigned long mfr;
|
|
#endif
|
|
|
|
#if defined(CONFIG_440GX) || \
|
|
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
|
|
defined(CONFIG_440SP) || defined(CONFIG_440SPE)
|
|
/* Need to get the OPB frequency so we can access the PHY */
|
|
get_sys_info (&sysinfo);
|
|
#endif
|
|
|
|
#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
|
|
/* provide clocks for EMAC internal loopback */
|
|
mfsdr (sdr_mfr, mfr);
|
|
mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum);
|
|
mtsdr (sdr_mfr, mfr);
|
|
sync ();
|
|
#endif
|
|
/* reset emac */
|
|
out32 (EMAC_M0 + hw_addr, EMAC_M0_SRST);
|
|
sync ();
|
|
|
|
for (i = 0;; i++) {
|
|
if (!(in32 (EMAC_M0 + hw_addr) & EMAC_M0_SRST))
|
|
break;
|
|
if (i >= 1000) {
|
|
printf ("Timeout resetting EMAC\n");
|
|
break;
|
|
}
|
|
udelay (1000);
|
|
}
|
|
#if defined(CONFIG_440GX) || \
|
|
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
|
|
defined(CONFIG_440SP) || defined(CONFIG_440SPE)
|
|
/* Whack the M1 register */
|
|
mode_reg = 0x0;
|
|
if (sysinfo.freqOPB <= 50000000);
|
|
else if (sysinfo.freqOPB <= 66666667)
|
|
mode_reg |= EMAC_M1_OBCI_66;
|
|
else if (sysinfo.freqOPB <= 83333333)
|
|
mode_reg |= EMAC_M1_OBCI_83;
|
|
else if (sysinfo.freqOPB <= 100000000)
|
|
mode_reg |= EMAC_M1_OBCI_100;
|
|
else
|
|
mode_reg |= EMAC_M1_OBCI_GT100;
|
|
|
|
out32 (EMAC_M1 + hw_addr, mode_reg);
|
|
|
|
#endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */
|
|
|
|
/* set the Mal configuration reg */
|
|
#if defined(CONFIG_440GX) || \
|
|
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
|
|
defined(CONFIG_440SP) || defined(CONFIG_440SPE)
|
|
mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
|
|
MAL_CR_PLBLT_DEFAULT | 0x00330000);
|
|
#else
|
|
mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT);
|
|
/* Errata 1.12: MAL_1 -- Disable MAL bursting */
|
|
if (get_pvr() == PVR_440GP_RB) {
|
|
mtdcr (malmcr, mfdcr(malmcr) & ~MAL_CR_PLBB);
|
|
}
|
|
#endif
|
|
/* setup buffer descriptors */
|
|
tx.ctrl = MAL_TX_CTRL_WRAP;
|
|
tx.data_len = 0;
|
|
tx.data_ptr = (char*)L1_CACHE_ALIGN((u32)tx_buf);
|
|
|
|
rx.ctrl = MAL_TX_CTRL_WRAP | MAL_RX_CTRL_EMPTY;
|
|
rx.data_len = 0;
|
|
rx.data_ptr = (char*)L1_CACHE_ALIGN((u32)rx_buf);
|
|
|
|
switch (devnum) {
|
|
case 1:
|
|
/* setup MAL tx & rx channel pointers */
|
|
#if defined (CONFIG_405EP) || defined (CONFIG_440EP) || defined (CONFIG_440GR)
|
|
mtdcr (maltxctp2r, &tx);
|
|
#else
|
|
mtdcr (maltxctp1r, &tx);
|
|
#endif
|
|
#if defined(CONFIG_440)
|
|
mtdcr (maltxbattr, 0x0);
|
|
mtdcr (malrxbattr, 0x0);
|
|
#endif
|
|
mtdcr (malrxctp1r, &rx);
|
|
/* set RX buffer size */
|
|
mtdcr (malrcbs1, PKTSIZE_ALIGN / 16);
|
|
break;
|
|
case 0:
|
|
default:
|
|
/* setup MAL tx & rx channel pointers */
|
|
#if defined(CONFIG_440)
|
|
mtdcr (maltxbattr, 0x0);
|
|
mtdcr (malrxbattr, 0x0);
|
|
#endif
|
|
mtdcr (maltxctp0r, &tx);
|
|
mtdcr (malrxctp0r, &rx);
|
|
/* set RX buffer size */
|
|
mtdcr (malrcbs0, PKTSIZE_ALIGN / 16);
|
|
break;
|
|
}
|
|
|
|
/* Enable MAL transmit and receive channels */
|
|
#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
|
|
mtdcr (maltxcasr, (MAL_TXRX_CASR >> (devnum*2)));
|
|
#else
|
|
mtdcr (maltxcasr, (MAL_TXRX_CASR >> devnum));
|
|
#endif
|
|
mtdcr (malrxcasr, (MAL_TXRX_CASR >> devnum));
|
|
|
|
/* set internal loopback mode */
|
|
#ifdef CFG_POST_ETHER_EXT_LOOPBACK
|
|
out32 (EMAC_M1 + hw_addr, EMAC_M1_FDE | 0 |
|
|
EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K |
|
|
EMAC_M1_MF_100MBPS | EMAC_M1_IST |
|
|
in32 (EMAC_M1));
|
|
#else
|
|
out32 (EMAC_M1 + hw_addr, EMAC_M1_FDE | EMAC_M1_ILE |
|
|
EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K |
|
|
EMAC_M1_MF_100MBPS | EMAC_M1_IST |
|
|
in32 (EMAC_M1));
|
|
#endif
|
|
|
|
/* set transmit enable & receive enable */
|
|
out32 (EMAC_M0 + hw_addr, EMAC_M0_TXE | EMAC_M0_RXE);
|
|
|
|
/* enable broadcast address */
|
|
out32 (EMAC_RXM + hw_addr, EMAC_RMR_BAE);
|
|
|
|
/* set transmit request threshold register */
|
|
out32 (EMAC_TRTR + hw_addr, 0x18000000); /* 256 byte threshold */
|
|
|
|
/* set receive low/high water mark register */
|
|
#if defined(CONFIG_440)
|
|
/* 440s has a 64 byte burst length */
|
|
out32 (EMAC_RX_HI_LO_WMARK + hw_addr, 0x80009000);
|
|
#else
|
|
/* 405s have a 16 byte burst length */
|
|
out32 (EMAC_RX_HI_LO_WMARK + hw_addr, 0x0f002000);
|
|
#endif /* defined(CONFIG_440) */
|
|
out32 (EMAC_TXM1 + hw_addr, 0xf8640000);
|
|
|
|
/* Set fifo limit entry in tx mode 0 */
|
|
out32 (EMAC_TXM0 + hw_addr, 0x00000003);
|
|
/* Frame gap set */
|
|
out32 (EMAC_I_FRAME_GAP_REG + hw_addr, 0x00000008);
|
|
sync ();
|
|
}
|
|
|
|
static void ether_post_halt (int devnum, int hw_addr)
|
|
{
|
|
int i = 0;
|
|
#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
|
|
unsigned long mfr;
|
|
#endif
|
|
|
|
/* 1st reset MAL channel */
|
|
/* Note: writing a 0 to a channel has no effect */
|
|
#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
|
|
mtdcr (maltxcarr, MAL_TXRX_CASR >> (devnum * 2));
|
|
#else
|
|
mtdcr (maltxcarr, MAL_TXRX_CASR >> devnum);
|
|
#endif
|
|
mtdcr (malrxcarr, MAL_TXRX_CASR >> devnum);
|
|
|
|
/* wait for reset */
|
|
while (mfdcr (malrxcasr) & (MAL_TXRX_CASR >> devnum)) {
|
|
if (i++ >= 1000)
|
|
break;
|
|
udelay (1000);
|
|
}
|
|
/* emac reset */
|
|
out32 (EMAC_M0 + hw_addr, EMAC_M0_SRST);
|
|
|
|
#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
|
|
/* remove clocks for EMAC internal loopback */
|
|
mfsdr (sdr_mfr, mfr);
|
|
mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum);
|
|
mtsdr (sdr_mfr, mfr);
|
|
#endif
|
|
}
|
|
|
|
static void ether_post_send (int devnum, int hw_addr, void *packet, int length)
|
|
{
|
|
int i = 0;
|
|
|
|
while (tx.ctrl & MAL_TX_CTRL_READY) {
|
|
if (i++ > 100) {
|
|
printf ("TX timeout\n");
|
|
return;
|
|
}
|
|
udelay (1000);
|
|
}
|
|
tx.ctrl = MAL_TX_CTRL_READY | MAL_TX_CTRL_WRAP | MAL_TX_CTRL_LAST |
|
|
EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP;
|
|
tx.data_len = length;
|
|
memcpy (tx.data_ptr, packet, length);
|
|
sync ();
|
|
|
|
out32 (EMAC_TXM0 + hw_addr, in32 (EMAC_TXM0 + hw_addr) | EMAC_TXM0_GNP0);
|
|
sync ();
|
|
}
|
|
|
|
static int ether_post_recv (int devnum, int hw_addr, void *packet, int max_length)
|
|
{
|
|
int length;
|
|
int i = 0;
|
|
|
|
while (rx.ctrl & MAL_RX_CTRL_EMPTY) {
|
|
if (i++ > 100) {
|
|
printf ("RX timeout\n");
|
|
return 0;
|
|
}
|
|
udelay (1000);
|
|
}
|
|
length = rx.data_len - 4;
|
|
if (length <= max_length)
|
|
memcpy(packet, rx.data_ptr, length);
|
|
sync ();
|
|
|
|
rx.ctrl |= MAL_RX_CTRL_EMPTY;
|
|
sync ();
|
|
|
|
return length;
|
|
}
|
|
|
|
/*
|
|
* Test routines
|
|
*/
|
|
|
|
static void packet_fill (char *packet, int length)
|
|
{
|
|
char c = (char) length;
|
|
int i;
|
|
|
|
/* set up ethernet header */
|
|
memset (packet, 0xff, 14);
|
|
|
|
for (i = 14; i < length; i++) {
|
|
packet[i] = c++;
|
|
}
|
|
}
|
|
|
|
static int packet_check (char *packet, int length)
|
|
{
|
|
char c = (char) length;
|
|
int i;
|
|
|
|
for (i = 14; i < length; i++) {
|
|
if (packet[i] != c++)
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int test_ctlr (int devnum, int hw_addr)
|
|
{
|
|
int res = -1;
|
|
char packet_send[MAX_PACKET_LENGTH];
|
|
char packet_recv[MAX_PACKET_LENGTH];
|
|
int length;
|
|
int i;
|
|
int l;
|
|
|
|
ether_post_init (devnum, hw_addr);
|
|
|
|
for (i = 0; i < TEST_NUM; i++) {
|
|
for (l = MIN_PACKET_LENGTH; l <= MAX_PACKET_LENGTH; l++) {
|
|
packet_fill (packet_send, l);
|
|
|
|
ether_post_send (devnum, hw_addr, packet_send, l);
|
|
|
|
length = ether_post_recv (devnum, hw_addr, packet_recv,
|
|
sizeof (packet_recv));
|
|
|
|
if (length != l || packet_check (packet_recv, length) < 0) {
|
|
goto Done;
|
|
}
|
|
}
|
|
}
|
|
|
|
res = 0;
|
|
|
|
Done:
|
|
|
|
ether_post_halt (devnum, hw_addr);
|
|
|
|
if (res != 0) {
|
|
post_log ("EMAC%d test failed\n", devnum);
|
|
}
|
|
|
|
return res;
|
|
}
|
|
|
|
int ether_post_test (int flags)
|
|
{
|
|
int res = 0;
|
|
int i;
|
|
|
|
/* Allocate tx & rx packet buffers */
|
|
tx_buf = malloc (PKTSIZE_ALIGN + CFG_CACHELINE_SIZE);
|
|
rx_buf = malloc (PKTSIZE_ALIGN + CFG_CACHELINE_SIZE);
|
|
|
|
if (!tx_buf || !rx_buf) {
|
|
printf ("Failed to allocate packet buffers\n");
|
|
res = -1;
|
|
goto out_free;
|
|
}
|
|
|
|
for (i = 0; i < LAST_EMAC_NUM; i++) {
|
|
if (test_ctlr (i, i*0x100))
|
|
res = -1;
|
|
}
|
|
|
|
out_free:
|
|
free (tx_buf);
|
|
free (rx_buf);
|
|
|
|
return res;
|
|
}
|
|
|
|
#endif /* CONFIG_POST & CFG_POST_ETHER */
|
|
#endif /* CONFIG_POST */
|