mirror of
https://github.com/Fishwaldo/u-boot.git
synced 2025-03-21 14:41:31 +00:00
ff7bd212cb
The picoseconds to register value divisor(ps_to_regval) should be 60 and not 200. Linux has KSZ9031_PS_TO_REG defined to be 60 as well. 60 is the correct divisor because the 4-bit skew values are defined from 0x0000(-420ps) to 0xffff(480ps), increments of 60. For example, a DTS skew value of 420, represents 0ps delay, which should be 0x7. With the previous divisor of 200, it would result in 0x2, which represents a -300ps delay. With this patch, ethernet on the SoCFPGA DE0 Atlas is now able to work with 1Gb ethernet. References: http://www.micrel.com/_PDF/Ethernet/datasheets/KSZ9031RNX.pdf -> page 26 Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com> |
||
|---|---|---|
| .. | ||
| aquantia.c | ||
| atheros.c | ||
| broadcom.c | ||
| cortina.c | ||
| davicom.c | ||
| et1011c.c | ||
| generic_10g.c | ||
| lxt.c | ||
| Makefile | ||
| marvell.c | ||
| micrel.c | ||
| miiphybb.c | ||
| mv88e61xx.c | ||
| mv88e61xx.h | ||
| mv88e6352.c | ||
| natsemi.c | ||
| phy.c | ||
| realtek.c | ||
| smsc.c | ||
| teranetics.c | ||
| ti.c | ||
| vitesse.c | ||