mirror of
https://github.com/Fishwaldo/bl_mcu_sdk.git
synced 2025-07-06 04:48:44 +00:00
[doc] update readme and rst
This commit is contained in:
jzlv
parent
3f480f087b
commit
4cdef3164f
65 changed files with 2435 additions and 640 deletions
33
README.md
33
README.md
|
|
@ -9,9 +9,9 @@
|
|||
|
||||
# SDK Versions & Chip Support
|
||||
|
||||
Note1：**drivers before v1.4.5 use v1.0（hal + std）, the later version will use v2.0 (lhal + soc)**。If you want to use **v1.4.5**, please checkout your branch to [release-v1.4.5](https://github.com/bouffalolab/bl_mcu_sdk/tree/release_v1.4.5).
|
||||
Note1: **drivers before v1.4.5 use v1.0（hal + std）, the later version will use v2.0 (lhal + soc)**。If you want to use **v1.4.5**, please checkout your branch to [release-v1.4.5](https://github.com/bouffalolab/bl_mcu_sdk/tree/release_v1.4.5).
|
||||
|
||||
Note2：due to the non-generic peripherals, the code style and interface name in **soc** are still the previous version, but will be subsequently updated to the new code style。
|
||||
Note2: due to the non-generic peripherals, the code style and interface name in **soc** are still the previous version, but will be subsequently updated to the new code style.
|
||||
|
||||
| CHIP | v1.4.5 | latest |
|
||||
|:-------------:|:--------:|:-------:|
|
||||
|
|
@ -24,7 +24,7 @@ Note2：due to the non-generic peripherals, the code style and interface name in
|
|||
|
||||
**LHAL** is a low level hal driver for common peripherals designed by Bouffalo Lab, in order to support all the Bouffalo chips with the same api . Also it is convenient for users to use and port to other platforms.
|
||||
|
||||
Note：**√** means supported ；**×** means not supported；**○** means supported but not tested ；**-** means no such peripheral。
|
||||
Note：**√** means supported ; **×** means not supported; **○** means supported but not tested ; **-** means no such peripheral.
|
||||
|
||||
| Peripheral | BL602/BL604 | BL702/BL704/BL706 | BL616/BL618 | BL808 |
|
||||
|:------------:|:--------------:|:--------------------:|:-----------:|:--------:|
|
||||
|
|
@ -61,6 +61,7 @@ Note：**√** means supported ；**×** means not supported；**○** means sup
|
|||
bl_mcu_sdk
|
||||
├── bsp
|
||||
│ ├── board
|
||||
│ │ └── bl602
|
||||
│ │ └── bl702
|
||||
│ │ └── bl616
|
||||
│ │ └── bl808
|
||||
|
|
@ -113,7 +114,7 @@ bl_mcu_sdk
|
|||
|
||||
## Command Line Development
|
||||
|
||||
Before compiling with the command line, you need to select the corresponding toolchain according to your operating system, configure it to the system environment variables, and install the **make**, then you can do the following.
|
||||
Before compiling with the command line, you need to select the corresponding toolchain according to your operating system, configure it to the system environment variables, and install the **make** or **ninja**, then you can do the following. For the details, you can visit [bl mcu sdk Environment Setup](https://bl-mcu-sdk.readthedocs.io/zh_CN/latest/get_started/index.html).
|
||||
|
||||
- Go to the demo directory where you want to compile and there are `main.c` and `Makefile` files in that directory
|
||||
- Just execute the following command, take **BL616** as an example
|
||||
|
|
@ -128,6 +129,15 @@ make CHIP=bl616 BOARD=bl616dk
|
|||
|
||||
- If you use **BL808** or **BL606P**, you need to add **CPU_ID** with m0 or d0.
|
||||
|
||||
If you want to use **ninja**, you can try:
|
||||
|
||||
```
|
||||
cd bl_mcu_sdk
|
||||
chmod +x tools/cmake/bin/cmake
|
||||
cd examples/helloworld
|
||||
make ninja CHIP=bl616 BOARD=bl616dk
|
||||
```
|
||||
|
||||
```
|
||||
cd bl_mcu_sdk
|
||||
chmod +x tools/cmake/bin/cmake
|
||||
|
|
@ -141,14 +151,14 @@ TODO
|
|||
|
||||
## Debug
|
||||
|
||||
Only supports debug with CKLink currently. See [bl mcu sdk debug chapter](https://bl-mcu-sdk.readthedocs.io/zh_CN/latest/get_started/debug.html).
|
||||
Only supports debug with CKLink currently. See [bl mcu sdk Debug Guide](https://bl-mcu-sdk.readthedocs.io/zh_CN/latest/get_started/debug.html).
|
||||
|
||||
## Firmware Download
|
||||
|
||||
We recommend you to use this **BL DevCube** and download firmware with serial.
|
||||
|
||||
- [BL DevCube Tool](https://dev.bouffalolab.com/download)
|
||||
- [BL DevCube download guide](https://bl-mcu-sdk.readthedocs.io/zh_CN/latest/get_started/devcube.html)
|
||||
- [Bouffalo Lab Dev Cube](https://dev.bouffalolab.com/download)
|
||||
- [Bouffalo Lab Dev Cube User Guide](https://bl-mcu-sdk.readthedocs.io/zh_CN/latest/get_started/devcube.html)
|
||||
|
||||
# Resources
|
||||
|
||||
|
|
@ -167,20 +177,13 @@ To get more bl mcu sdk documentation tutorial, like api manual or peripheral dem
|
|||
|
||||
- [BL706 MCU Development Series Video Tutorial](https://www.bilibili.com/video/BV1xK4y1P7ur)
|
||||
|
||||
### Flash Tool
|
||||
|
||||
In addition to using CK-link, J-link and command line programming, it also supports graphical programming tools.
|
||||
Graphical programming tools provided by Bouffalolab:
|
||||
|
||||
- [Bouffalo Lab Dev Cube](https://dev.bouffalolab.com/download)
|
||||
|
||||
## Forum
|
||||
|
||||
Bouffalolab Developer Forum: [https://bbs.bouffalolab.com/](https://bbs.bouffalolab.com/)
|
||||
|
||||
# License
|
||||
|
||||
**bl mcu sdk** is completely open source and follows the Apache License 2.0 open source license agreement. It can be used in commercial products for free and does not require public private code.
|
||||
**bl mcu sdk** follows the Apache License 2.0 open source license agreement. It can be used in commercial products for free and does not require public private code.
|
||||
|
||||
```
|
||||
/*
|
||||
|
|
|
|||
22
README_zh.md
22
README_zh.md
|
|
@ -33,7 +33,7 @@
|
|||
| CKS | ○ | √ | √ | ○ |
|
||||
| DAC | ○ | √ | √ | ○ |
|
||||
| DMA | ○ | √ | √ | √ |
|
||||
| EFUSE | × | × | × | × |
|
||||
| EFUSE | × | √ | √ | √ |
|
||||
| EMAC | - | √ | √ | √ |
|
||||
| FLASH | √ | √ | √ | √ |
|
||||
| GPIO | ○ | √ | √ | √ |
|
||||
|
|
@ -61,6 +61,7 @@
|
|||
bl_mcu_sdk
|
||||
├── bsp
|
||||
│ ├── board
|
||||
│ │ └── bl602
|
||||
│ │ └── bl702
|
||||
│ │ └── bl616
|
||||
│ │ └── bl808
|
||||
|
|
@ -113,7 +114,7 @@ bl_mcu_sdk
|
|||
|
||||
## 命令行编译
|
||||
|
||||
在进行命令行编译之前，需要根据你的操作系统，选择对应的工具链，并配置到系统环境变量，并安装了 **make** 工具，然后才能进行下面操作。
|
||||
在进行命令行编译之前，需要根据你的操作系统，选择对应的工具链，并配置到系统环境变量，并安装了 **make** 或者 **ninja** 工具，然后才能进行下面操作。更详细的搭建过程，参考 [bl mcu sdk 环境搭建](https://bl-mcu-sdk.readthedocs.io/zh_CN/latest/get_started/index.html).
|
||||
|
||||
- 进入要编译的 demo 目录，且该目录下有 `main.c` 和 `Makefile` 文件
|
||||
- 执行下面命令即可,以 **BL616** 为例
|
||||
|
|
@ -135,20 +136,29 @@ cd examples/helloworld
|
|||
make CHIP=bl808 BOARD=bl808dk CPU_ID=m0
|
||||
```
|
||||
|
||||
如果你想使用 **ninja** 编译，你可以尝试：
|
||||
|
||||
```
|
||||
cd bl_mcu_sdk
|
||||
chmod +x tools/cmake/bin/cmake
|
||||
cd examples/helloworld
|
||||
make ninja CHIP=bl808 BOARD=bl808dk CPU_ID=m0
|
||||
```
|
||||
|
||||
## CDK 编译
|
||||
|
||||
TODO
|
||||
|
||||
## 调试
|
||||
|
||||
当前仅支持使用 CKLink 调试。详细参考 [bl mcu sdk 调试章节](https://bl-mcu-sdk.readthedocs.io/zh_CN/latest/get_started/debug.html)。
|
||||
当前仅支持使用 CKLink 调试。详细参考 [bl mcu sdk 调试指南](https://bl-mcu-sdk.readthedocs.io/zh_CN/latest/get_started/debug.html)。
|
||||
|
||||
## 固件烧录
|
||||
|
||||
推荐使用 **BL DevCube** 并通过串口进行固件的烧录。
|
||||
|
||||
- [BL DevCube Tool](https://dev.bouffalolab.com/download)
|
||||
- [BL DevCube download guide](https://bl-mcu-sdk.readthedocs.io/zh_CN/latest/get_started/devcube.html)
|
||||
- [Bouffalo Lab Dev Cube](https://dev.bouffalolab.com/download)
|
||||
- [Bouffalo Lab Dev Cube User Guide](https://bl-mcu-sdk.readthedocs.io/zh_CN/latest/get_started/devcube.html)
|
||||
|
||||
# 芯片手册
|
||||
|
||||
|
|
@ -171,7 +181,7 @@ TODO
|
|||
|
||||
# 许可协议
|
||||
|
||||
**bl mcu sdk** 完全开源，遵循 Apache License 2.0 开源许可协议，可以免费在商业产品中使用，并且不需要公开私有代码。
|
||||
**bl mcu sdk** 遵循 Apache License 2.0 开源许可协议，可以免费在商业产品中使用，并且不需要公开私有代码。
|
||||
|
||||
```
|
||||
/*
|
||||
|
|
|
|||
2
docs/source/advance_samples/index.rst
Normal file
2
docs/source/advance_samples/index.rst
Normal file
|
|
@ -0,0 +1,2 @@
|
|||
TODO
|
||||
====================
|
||||
|
|
@ -3,6 +3,7 @@ BFLOG
|
|||
|
||||
简介
|
||||
------------
|
||||
|
||||
- BFLOG 是一个移植简单，功能多样的多线程日志记录库
|
||||
- 具有同步异步两种工作模式，异步模式如果缓冲区溢出会将最早的一条记录完整删除
|
||||
- 总体三部分、记录器、定向输出、格式化器
|
||||
|
|
@ -20,7 +21,8 @@ BFLOG
|
|||
log 样式
|
||||
|
||||
配置BFLOG相关功能
|
||||
------------
|
||||
-------------------
|
||||
|
||||
如果需要配置BFLOG的相关功能需要在对应的工程目录下 `proj.conf` 文件中添加对应的代码，举例如下：
|
||||
|
||||
.. note:: BFLOG 默认依赖 VLIBC 需要先启用 VLIBC。
|
||||
|
|
@ -62,7 +64,7 @@ BFLOG
|
|||
set(CONFIG_BSP_SDH_SDCARD 1)
|
||||
|
||||
# 使能 Fatfs 的 SD 卡接口
|
||||
set(CONFIG_BSP_FATFS_SDH_SDCARD 1)
|
||||
set(CONFIG_FATFS_SDH_SDCARD 1)
|
||||
|
||||
此外在 `proj.conf` 配置中添加以下配置可以使用用户的 **bflog_user.h** 配置文件，配置文件模板为 **bflog_default.h**
|
||||
|
||||
|
|
|
|||
|
|
@ -12,7 +12,7 @@ adc channel
|
|||
adc clock div
|
||||
^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
对 adc 时钟再一次进行分频。分频后的时钟必须小于 2M。
|
||||
对 adc 时钟再一次进行分频。分频后的时钟必须小于等于 500K。ADC CLK = CLK_SOURCE/CLK_DIV/adc_clk_div。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
|
@ -480,3 +480,41 @@ bflb_adc_tsen_get_temp
|
|||
- 设备句柄
|
||||
* - return
|
||||
- 温度
|
||||
|
||||
bflb_adc_vbat_enable
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 开启 vbat 。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_adc_vbat_enable(struct bflb_device_s *dev);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - dev
|
||||
- 设备句柄
|
||||
|
||||
bflb_adc_vbat_disable
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 关闭 vbat。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_adc_vbat_disable(struct bflb_device_s *dev);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - dev
|
||||
- 设备句柄
|
||||
|
|
|
|||
15
docs/source/api_reference/peripherals/cks.rst
Normal file
15
docs/source/api_reference/peripherals/cks.rst
Normal file
|
|
@ -0,0 +1,15 @@
|
|||
CKS
|
||||
=============
|
||||
|
||||
Macros
|
||||
------------
|
||||
|
||||
无
|
||||
|
||||
Structs
|
||||
------------
|
||||
|
||||
无
|
||||
|
||||
Functions
|
||||
------------
|
||||
|
|
@ -25,8 +25,8 @@ dma 地址自增使能。
|
|||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
#define DMA_ADDR_INCREMENT_DISABLE 0 /*!< Addr increment mode disable */
|
||||
#define DMA_ADDR_INCREMENT_ENABLE 1 /*!< Addr increment mode enable */
|
||||
#define DMA_ADDR_INCREMENT_DISABLE 0
|
||||
#define DMA_ADDR_INCREMENT_ENABLE 1
|
||||
|
||||
dma data width
|
||||
^^^^^^^^^^^^^^^^^^^^^
|
||||
|
|
@ -53,7 +53,7 @@ dma 突发传输个数，最多 16 字节突发。
|
|||
#define DMA_BURST_INCR8 2
|
||||
#define DMA_BURST_INCR16 3
|
||||
|
||||
.. warning:: 位宽 * 突发个数 需要小于等于 16
|
||||
.. warning:: 位宽 * 突发个数 需要小于等于 16 字节
|
||||
|
||||
dma addr
|
||||
^^^^^^^^^^^^^^^^^^^^^
|
||||
|
|
@ -315,7 +315,31 @@ bflb_dma_channel_lli_reload
|
|||
* - count
|
||||
- 传输次数
|
||||
* - return
|
||||
- 小于0 表示参数错误或者内存池过小
|
||||
- 返回使用的 lli count个数，小于0表示错误
|
||||
|
||||
bflb_dma_channel_lli_link_head
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 将 lli 最后一个链表与头部连接，表示开启循环模式。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_dma_channel_lli_link_head(struct bflb_device_s *dev,
|
||||
struct bflb_dma_channel_lli_pool_s *lli_pool, uint32_t used_lli_count);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - dev
|
||||
- 设备句柄
|
||||
* - lli_pool
|
||||
- lli 内存池
|
||||
* - used_lli_count
|
||||
- 已经使用的 lli 个数
|
||||
|
||||
bflb_dma_feature_control
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
|
@ -347,3 +371,5 @@ bflb_dma_feature_control
|
|||
|
||||
#define DMA_CMD_SET_SRCADDR_INCREMENT (0x01)
|
||||
#define DMA_CMD_SET_DSTADDR_INCREMENT (0x02)
|
||||
#define DMA_CMD_SET_ADD_MODE (0x03)
|
||||
#define DMA_CMD_SET_REDUCE_MODE (0x04)
|
||||
|
|
|
|||
235
docs/source/api_reference/peripherals/flash.rst
Normal file
235
docs/source/api_reference/peripherals/flash.rst
Normal file
|
|
@ -0,0 +1,235 @@
|
|||
FLASH
|
||||
=============
|
||||
|
||||
Macros
|
||||
------------
|
||||
|
||||
flash iomode
|
||||
^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
#define FLASH_IOMODE_NIO 0
|
||||
#define FLASH_IOMODE_DO 1
|
||||
#define FLASH_IOMODE_QO 2
|
||||
#define FLASH_IOMODE_DIO 3
|
||||
#define FLASH_IOMODE_QIO 4
|
||||
|
||||
Structs
|
||||
------------
|
||||
|
||||
无
|
||||
|
||||
Functions
|
||||
------------
|
||||
|
||||
bflb_flash_init
|
||||
^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: flash 初始化，自动识别支持的 flash 并重新配置 flash 的参数。如果返回错误，必须停止运行代码。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
int bflb_flash_init(void);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - return
|
||||
- 返回 0 表示成功，其他表示错误，必须停止运行代码
|
||||
|
||||
bflb_flash_get_jedec_id
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 获取 flash jedec id。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
uint32_t bflb_flash_get_jedec_id(void);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - return
|
||||
- 返回 flash jedec id
|
||||
|
||||
bflb_flash_get_cfg
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 获取 flash 配置。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_flash_get_cfg(uint8_t **cfg_addr, uint32_t *len);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - cfg_addr
|
||||
- 保存 flash 配置的地址
|
||||
* - len
|
||||
- flash 配置的长度
|
||||
|
||||
bflb_flash_set_iomode
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 设置 flash IO 工作模式。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_flash_set_iomode(uint8_t iomode);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - iomode
|
||||
- flash IO 工作模式
|
||||
|
||||
bflb_flash_get_image_offset
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 获取代码 xip 虚拟地址实际所在的 flash 物理地址。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
uint32_t bflb_flash_get_image_offset(void);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - return
|
||||
- 返回 flash xip 物理地址
|
||||
|
||||
bflb_flash_erase
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: flash 扇区擦除。 **len** 为擦除的长度，需要为 4096 倍数，假设 **addr** 为0 ， **len** 为 4096，则擦除范围为 0 ~ 4095。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
int bflb_flash_erase(uint32_t addr, uint32_t len);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - addr
|
||||
- 擦除的物理地址
|
||||
* - len
|
||||
- 擦除长度，需要是 4096 的倍数
|
||||
* - return
|
||||
- 返回 0 表示成功，其他表示错误
|
||||
|
||||
bflb_flash_write
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 获取代码 xip 虚拟地址实际所在的 flash 物理地址。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
int bflb_flash_write(uint32_t addr, uint8_t *data, uint32_t len);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - addr
|
||||
- 写入的物理地址
|
||||
* - data
|
||||
- 写入的数据缓冲区
|
||||
* - len
|
||||
- 写入长度
|
||||
* - return
|
||||
- 返回 0 表示成功，其他表示错误
|
||||
|
||||
bflb_flash_read
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 获取代码 xip 虚拟地址实际所在的 flash 物理地址。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
int bflb_flash_read(uint32_t addr, uint8_t *data, uint32_t len);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - addr
|
||||
- 读取的物理地址
|
||||
* - data
|
||||
- 读取的数据缓冲区
|
||||
* - len
|
||||
- 读取长度
|
||||
* - return
|
||||
- 返回 0 表示成功，其他表示错误
|
||||
|
||||
bflb_flash_aes_init
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 配置某一段 flash 区域进行硬件 aes 解密，能够通过 xip 直接读取解密后的内容。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_flash_aes_init(struct bflb_flash_aes_config_s *config);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - config
|
||||
- flash aes 配置
|
||||
|
||||
bflb_flash_aes_enable
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 使能 flash aes 解密。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_flash_aes_enable(void);
|
||||
|
||||
bflb_flash_aes_disable
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 关闭 flash aes 解密。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_flash_aes_disable(void);
|
||||
|
||||
|
|
@ -71,7 +71,7 @@ API 支持情况
|
|||
* - peripheral
|
||||
- BL602/BL604
|
||||
- BL702/BL704/BL706
|
||||
- BL616
|
||||
- BL616/BL618
|
||||
- BL808
|
||||
* - ADC
|
||||
- ❓
|
||||
|
|
@ -83,6 +83,11 @@ API 支持情况
|
|||
- ❌
|
||||
- ❌
|
||||
- ❌
|
||||
* - CKS
|
||||
- ❓
|
||||
- ✔️
|
||||
- ✔️
|
||||
- ❓
|
||||
* - DAC
|
||||
- ❓
|
||||
- ✔️
|
||||
|
|
@ -94,20 +99,20 @@ API 支持情况
|
|||
- ✔️
|
||||
- ✔️
|
||||
* - EFUSE
|
||||
- ❌
|
||||
- ❌
|
||||
- ❌
|
||||
- ❌
|
||||
- ❓
|
||||
- ✔️
|
||||
- ✔️
|
||||
- ✔️
|
||||
* - EMAC
|
||||
- ➖
|
||||
- ✔️
|
||||
- ✔️
|
||||
- ✔️
|
||||
* - FLASH
|
||||
- ❌
|
||||
- ❌
|
||||
- ❌
|
||||
- ❌
|
||||
- ✔️
|
||||
- ✔️
|
||||
- ✔️
|
||||
- ✔️
|
||||
* - GPIO
|
||||
- ❓
|
||||
- ✔️
|
||||
|
|
@ -125,8 +130,8 @@ API 支持情况
|
|||
- ✔️
|
||||
* - MJPEG
|
||||
- ❌
|
||||
- ❌
|
||||
- ❌
|
||||
- ✔️
|
||||
- ✔️
|
||||
- ❌
|
||||
* - PWM_v1
|
||||
- ❓
|
||||
|
|
@ -158,6 +163,11 @@ API 支持情况
|
|||
- ✔️
|
||||
- ✔️
|
||||
- ✔️
|
||||
* - SEC_PKA
|
||||
- ❓
|
||||
- ✔️
|
||||
- ✔️
|
||||
- ✔️
|
||||
* - SPI
|
||||
- ❓
|
||||
- ✔️
|
||||
|
|
@ -183,6 +193,11 @@ API 支持情况
|
|||
- ➖
|
||||
- ✔️
|
||||
- ✔️
|
||||
* - WDG
|
||||
- ❓
|
||||
- ✔️
|
||||
- ✔️
|
||||
- ✔️
|
||||
|
||||
API 列表
|
||||
---------------
|
||||
|
|
@ -191,9 +206,11 @@ API 列表
|
|||
:maxdepth: 1
|
||||
|
||||
ADC <adc>
|
||||
CKS <cks>
|
||||
CLOCK <clock>
|
||||
DAC <dac>
|
||||
DMA <dma>
|
||||
FLASH <flash>
|
||||
GPIO <gpio>
|
||||
I2C <i2c>
|
||||
IRQ <irq>
|
||||
|
|
@ -204,6 +221,7 @@ API 列表
|
|||
RTC <rtc>
|
||||
SEC_AES <sec_aes>
|
||||
SEC_SHA <sec_sha>
|
||||
SEC_PKA <sec_pka>
|
||||
SPI <spi>
|
||||
TIMER <timer>
|
||||
UART <uart>
|
||||
|
|
|
|||
|
|
@ -32,7 +32,7 @@ bflb_irq_save
|
|||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
uint32_t bflb_irq_save(void);
|
||||
uintptr_t bflb_irq_save(void);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
|
|
@ -51,7 +51,7 @@ bflb_irq_restore
|
|||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_irq_restore(uint32_t flags);
|
||||
void bflb_irq_restore(uintptr_t flags);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
|
|
@ -100,29 +100,6 @@ bflb_irq_detach
|
|||
* - flags
|
||||
- 关闭之前的状态
|
||||
|
||||
bflb_irq_set_priority
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 设置中断优先级。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_irq_set_priority(int irq, uint8_t preemptprio, uint8_t subprio);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - irq
|
||||
- 中断号
|
||||
* - preemptprio
|
||||
- 抢占优先级
|
||||
* - subprio
|
||||
- 子优先级
|
||||
|
||||
bflb_irq_enable
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
|
|
@ -160,3 +137,83 @@ bflb_irq_disable
|
|||
- description
|
||||
* - irq
|
||||
- 中断号
|
||||
|
||||
bflb_irq_set_pending
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 设置中断 pending 位。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_irq_set_pending(int irq);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - irq
|
||||
- 中断号
|
||||
|
||||
bflb_irq_clear_pending
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 清除中断 pending 位。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_irq_clear_pending(int irq);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - irq
|
||||
- 中断号
|
||||
|
||||
bflb_irq_set_nlbits
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 设置中断分组。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_irq_set_nlbits(uint8_t nlbits);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - irq
|
||||
- 中断号
|
||||
|
||||
bflb_irq_set_priority
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 设置中断优先级。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_irq_set_priority(int irq, uint8_t preemptprio, uint8_t subprio);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - irq
|
||||
- 中断号
|
||||
* - preemptprio
|
||||
- 抢占优先级
|
||||
* - subprio
|
||||
- 子优先级
|
||||
|
|
@ -1,11 +1,19 @@
|
|||
L1C
|
||||
=============
|
||||
|
||||
.. note:: BL602、BL702 无 L1C 函数操作。
|
||||
|
||||
Macros
|
||||
------------
|
||||
|
||||
无
|
||||
|
||||
Structs
|
||||
------------
|
||||
|
||||
无
|
||||
|
||||
Functions
|
||||
------------
|
||||
|
||||
bflb_l1c_icache_enable
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
|
|
@ -108,13 +116,3 @@ bflb_l1c_dcache_clean_invalidate_range
|
|||
- 首地址（必须 32 字节对齐）
|
||||
* - len
|
||||
- 长度
|
||||
|
||||
Structs
|
||||
------------
|
||||
|
||||
无
|
||||
|
||||
Functions
|
||||
------------
|
||||
|
||||
无
|
||||
|
|
@ -12,4 +12,120 @@ Structs
|
|||
无
|
||||
|
||||
Functions
|
||||
------------
|
||||
------------
|
||||
|
||||
bflb_mtimer_config
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: mtimer 定时配置。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_mtimer_config(uint64_t ticks, void (*interruptfun)(void));
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - ticks
|
||||
- 定时 tick 数
|
||||
* - interruptfun
|
||||
- 中断回调
|
||||
|
||||
bflb_mtimer_get_freq
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 获取 mtimer 频率。默认 mtimer 经过分频后设置成了 1M，所以频率就是 1M。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
uint32_t bflb_mtimer_get_freq(void);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - return
|
||||
- 频率
|
||||
|
||||
bflb_mtimer_delay_ms
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: mtimer 毫秒延时。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_mtimer_delay_ms(uint32_t time);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - time
|
||||
- 延时时间
|
||||
|
||||
bflb_mtimer_delay_us
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: mtimer 微妙延时。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_mtimer_delay_us(uint32_t time);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - time
|
||||
- 延时时间
|
||||
|
||||
bflb_mtimer_get_time_us
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 获取 mtimer 当前时间，us 为单位。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
uint64_t bflb_mtimer_get_time_us();
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - return
|
||||
- 当前时间
|
||||
|
||||
bflb_mtimer_get_time_ms
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 获取 mtimer 当前时间，ms 为单位。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
uint64_t bflb_mtimer_get_time_ms();
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - return
|
||||
- 当前时间
|
||||
|
|
|
|||
|
|
@ -1,13 +1,15 @@
|
|||
PWM_v1
|
||||
=============
|
||||
|
||||
.. note:: PWM V1 版本每个 PWM 的所有通道频率可以单独设置。
|
||||
|
||||
Macros
|
||||
------------
|
||||
|
||||
pwm channel
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
PWM V1 版本共 5个 pwm 通道。
|
||||
PWM V1 版本共 5 个 pwm 通道。（BL702L 只有通道 0）。
|
||||
|
||||
Structs
|
||||
------------
|
||||
|
|
|
|||
|
|
@ -1,15 +1,483 @@
|
|||
PWM_v2
|
||||
=============
|
||||
|
||||
.. note:: PWM V2 版本每个 PWM 的所有通道共用一个频率。
|
||||
|
||||
Macros
|
||||
------------
|
||||
|
||||
无
|
||||
pwm channel
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
PWM V2 版本每个 PWM 共 4 个 pwm 通道。
|
||||
|
||||
pwm polarity
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
PWM V2 版本输出有效极性。当正向通道阈值位于设置的低阈值和高阈值之间，为有效极性，如果设置有效极性为高，则输出高电平，反之输出低电平。反向通道相反，阈值位于设置的低阈值和高阈值之外，为有效极性，如果设置有效极性为高，则输出高电平，反之输出低电平。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
#define PWM_POLARITY_ACTIVE_LOW 0
|
||||
#define PWM_POLARITY_ACTIVE_HIGH 1
|
||||
|
||||
Structs
|
||||
------------
|
||||
|
||||
无
|
||||
struct bflb_pwm_v2_config_s
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
pwm v2 初始化配置结构体。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
struct bflb_pwm_v2_config_s {
|
||||
uint8_t clk_source;
|
||||
uint16_t clk_div;
|
||||
uint16_t period;
|
||||
};
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - clk_source
|
||||
- 时钟源选择：PBCLK or XCLK or 32K_CLK
|
||||
* - clk_div
|
||||
- 分频值
|
||||
* - period
|
||||
- 周期值
|
||||
|
||||
.. note:: PWM 最终产生的频率 = clk_source/clk_div/period
|
||||
|
||||
struct bflb_pwm_v2_channel_config_s
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
pwm v2 初始化配置结构体。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
struct bflb_pwm_v2_channel_config_s {
|
||||
uint8_t positive_polarity;
|
||||
uint8_t negative_polarity;
|
||||
uint8_t positive_stop_state;
|
||||
uint8_t negative_stop_state;
|
||||
uint8_t positive_brake_state;
|
||||
uint8_t negative_brake_state;
|
||||
uint8_t dead_time;
|
||||
};
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - positive_polarity
|
||||
- 正向输出极性
|
||||
* - negative_polarity
|
||||
- 反向输出极性
|
||||
* - positive_stop_state
|
||||
- 正向输出空闲状态
|
||||
* - negative_stop_state
|
||||
- 反向输出空闲状态
|
||||
* - positive_brake_state
|
||||
- 正向输出刹车状态
|
||||
* - negative_brake_state
|
||||
- 反向输出刹车状态
|
||||
* - dead_time
|
||||
- 死区时间
|
||||
|
||||
Functions
|
||||
------------
|
||||
------------
|
||||
|
||||
bflb_pwm_v2_init
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 初始化 pwm 。使用之前需要选择 gpio 为 pwm 功能。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_pwm_v2_init(struct bflb_device_s *dev, const struct bflb_pwm_v2_config_s *config);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - dev
|
||||
- 设备句柄
|
||||
* - config
|
||||
- 配置项
|
||||
|
||||
bflb_pwm_v2_deinit
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 复位 pwm 。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_pwm_v2_deinit(struct bflb_device_s *dev);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - dev
|
||||
- 设备句柄
|
||||
|
||||
bflb_pwm_v2_start
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 启动 pwm 输出。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_pwm_v2_start(struct bflb_device_s *dev);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - dev
|
||||
- 设备句柄
|
||||
|
||||
bflb_pwm_v2_stop
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 关闭 pwm 输出。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_pwm_v2_stop(struct bflb_device_s *dev);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - dev
|
||||
- 设备句柄
|
||||
|
||||
bflb_pwm_v2_set_period
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 修改 pwm 周期值，从而更改 pwm 输出的频率。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_pwm_v2_set_period(struct bflb_device_s *dev, uint16_t period);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - dev
|
||||
- 设备句柄
|
||||
* - period
|
||||
- 周期值
|
||||
|
||||
bflb_pwm_v2_channel_init
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: PWM 通道初始化。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_pwm_v2_channel_init(struct bflb_device_s *dev, uint8_t ch, struct bflb_pwm_v2_channel_config_s *config);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - dev
|
||||
- 设备句柄
|
||||
* - ch
|
||||
- 通道号
|
||||
* - config
|
||||
- 通道配置
|
||||
|
||||
bflb_pwm_v2_channel_set_threshold
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 设置 PWM 占空比。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_pwm_v2_channel_set_threshold(struct bflb_device_s *dev, uint8_t ch, uint16_t low_threhold, uint16_t high_threhold);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - dev
|
||||
- 设备句柄
|
||||
* - ch
|
||||
- 通道号
|
||||
* - low_threhold
|
||||
- 低阈值
|
||||
* - high_threhold
|
||||
- 高阈值,需要大于 low_threhold，并且小于等于 period
|
||||
|
||||
.. note:: PWM 占空比 = (high_threhold - low_threhold)/period
|
||||
|
||||
bflb_pwm_v2_channel_positive_start
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: PWM 正向通道使能输出。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_pwm_v2_channel_positive_start(struct bflb_device_s *dev, uint8_t ch);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - dev
|
||||
- 设备句柄
|
||||
* - ch
|
||||
- 通道号
|
||||
|
||||
bflb_pwm_v2_channel_negative_start
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: PWM 反向通道使能输出。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_pwm_v2_channel_negative_start(struct bflb_device_s *dev, uint8_t ch);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - dev
|
||||
- 设备句柄
|
||||
* - ch
|
||||
- 通道号
|
||||
|
||||
bflb_pwm_v2_channel_positive_stop
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: PWM 正向通道停止输出。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_pwm_v2_channel_positive_stop(struct bflb_device_s *dev, uint8_t ch);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - dev
|
||||
- 设备句柄
|
||||
* - ch
|
||||
- 通道号
|
||||
|
||||
bflb_pwm_v2_channel_negative_stop
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: PWM 反向通道停止输出。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_pwm_v2_channel_negative_stop(struct bflb_device_s *dev, uint8_t ch);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - dev
|
||||
- 设备句柄
|
||||
* - ch
|
||||
- 通道号
|
||||
|
||||
bflb_pwm_v2_int_enable
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: PWM 中断使能和关闭。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_pwm_v2_int_enable(struct bflb_device_s *dev, uint32_t int_en, bool enable);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - dev
|
||||
- 设备句柄
|
||||
* - int_en
|
||||
- 中断使能位
|
||||
* - enable
|
||||
- 是否开启中断
|
||||
|
||||
`int_en` 可以填入以下值，多个中断可以使用 `|` 连接：
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
#define PWM_INTEN_CH0_L (1 << 0)
|
||||
#define PWM_INTEN_CH0_H (1 << 1)
|
||||
#define PWM_INTEN_CH1_L (1 << 2)
|
||||
#define PWM_INTEN_CH1_H (1 << 3)
|
||||
#define PWM_INTEN_CH2_L (1 << 4)
|
||||
#define PWM_INTEN_CH2_H (1 << 5)
|
||||
#define PWM_INTEN_CH3_L (1 << 6)
|
||||
#define PWM_INTEN_CH3_H (1 << 7)
|
||||
#define PWM_INTEN_PERIOD (1 << 8)
|
||||
#define PWM_INTEN_BRAKE (1 << 9)
|
||||
#define PWM_INTEN_REPT (1 << 10)
|
||||
|
||||
bflb_pwm_v2_get_intstatus
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 获取 PWM 中断标志。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
uint32_t bflb_pwm_v2_get_intstatus(struct bflb_device_s *dev);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - dev
|
||||
- 设备句柄
|
||||
* - return
|
||||
- 返回中断标志
|
||||
|
||||
返回值如下：
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
#define PWM_INTSTS_CH0_L (1 << 0)
|
||||
#define PWM_INTSTS_CH0_H (1 << 1)
|
||||
#define PWM_INTSTS_CH1_L (1 << 2)
|
||||
#define PWM_INTSTS_CH1_H (1 << 3)
|
||||
#define PWM_INTSTS_CH2_L (1 << 4)
|
||||
#define PWM_INTSTS_CH2_H (1 << 5)
|
||||
#define PWM_INTSTS_CH3_L (1 << 6)
|
||||
#define PWM_INTSTS_CH3_H (1 << 7)
|
||||
#define PWM_INTSTS_PERIOD (1 << 8)
|
||||
#define PWM_INTSTS_BRAKE (1 << 9)
|
||||
#define PWM_INTSTS_REPT (1 << 10)
|
||||
|
||||
bflb_pwm_v2_int_clear
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 清除 PWM 中断标志。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_pwm_v2_int_clear(struct bflb_device_s *dev, uint32_t int_clear);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - dev
|
||||
- 设备句柄
|
||||
* - int_clear
|
||||
- 清除值
|
||||
|
||||
`int_clear` 可以填入以下参数:
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
#define PWM_INTCLR_CH0_L (1 << 0)
|
||||
#define PWM_INTCLR_CH0_H (1 << 1)
|
||||
#define PWM_INTCLR_CH1_L (1 << 2)
|
||||
#define PWM_INTCLR_CH1_H (1 << 3)
|
||||
#define PWM_INTCLR_CH2_L (1 << 4)
|
||||
#define PWM_INTCLR_CH2_H (1 << 5)
|
||||
#define PWM_INTCLR_CH3_L (1 << 6)
|
||||
#define PWM_INTCLR_CH3_H (1 << 7)
|
||||
#define PWM_INTCLR_PERIOD (1 << 8)
|
||||
#define PWM_INTCLR_BRAKE (1 << 9)
|
||||
#define PWM_INTCLR_REPT (1 << 10)
|
||||
|
||||
bflb_pwm_v2_feature_control
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: PWM 其他特性相关控制，一般不常用。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
int bflb_pwm_v2_feature_control(struct bflb_device_s *dev, int cmd, size_t arg);
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 10
|
||||
:header-rows: 1
|
||||
|
||||
* - parameter
|
||||
- description
|
||||
* - dev
|
||||
- 设备句柄
|
||||
* - cmd
|
||||
- 控制字
|
||||
* - arg
|
||||
- 控制参数
|
||||
* - return
|
||||
- 负值表示不支持此命令
|
||||
|
||||
`cmd` 可以填入以下参数:
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
#define PWM_CMD_SET_TRIG_ADC_SRC (0x01)
|
||||
#define PWM_CMD_SET_EXT_BRAKE_POLARITY (0x02)
|
||||
#define PWM_CMD_SET_EXT_BRAKE_ENABLE (0x03)
|
||||
#define PWM_CMD_SET_SW_BRAKE_ENABLE (0x04)
|
||||
#define PWM_CMD_SET_STOP_ON_REPT (0x05)
|
||||
#define PWM_CMD_SET_REPT_COUNT (0x06)
|
||||
15
docs/source/api_reference/peripherals/sec_aes.rst
Normal file
15
docs/source/api_reference/peripherals/sec_aes.rst
Normal file
|
|
@ -0,0 +1,15 @@
|
|||
SEC_AES
|
||||
=============
|
||||
|
||||
Macros
|
||||
------------
|
||||
|
||||
无
|
||||
|
||||
Structs
|
||||
------------
|
||||
|
||||
无
|
||||
|
||||
Functions
|
||||
------------
|
||||
15
docs/source/api_reference/peripherals/sec_pka.rst
Normal file
15
docs/source/api_reference/peripherals/sec_pka.rst
Normal file
|
|
@ -0,0 +1,15 @@
|
|||
SEC_PKA
|
||||
=============
|
||||
|
||||
Macros
|
||||
------------
|
||||
|
||||
无
|
||||
|
||||
Structs
|
||||
------------
|
||||
|
||||
无
|
||||
|
||||
Functions
|
||||
------------
|
||||
15
docs/source/api_reference/peripherals/sec_sha.rst
Normal file
15
docs/source/api_reference/peripherals/sec_sha.rst
Normal file
|
|
@ -0,0 +1,15 @@
|
|||
SEC_SHA
|
||||
=============
|
||||
|
||||
Macros
|
||||
------------
|
||||
|
||||
无
|
||||
|
||||
Structs
|
||||
------------
|
||||
|
||||
无
|
||||
|
||||
Functions
|
||||
------------
|
||||
|
|
@ -309,7 +309,7 @@ bflb_spi_errint_mask
|
|||
bflb_spi_get_intstatus
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 获取 uart 中断标志。
|
||||
说明: 获取 spi 中断标志。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
|
@ -332,16 +332,17 @@ bflb_spi_get_intstatus
|
|||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
SPI_TXF_INT
|
||||
SPI_RXF_INT
|
||||
SPI_STO_INT
|
||||
SPI_TXU_INT
|
||||
SPI_FER_INT
|
||||
#define SPI_INTSTS_TC (1 << 0)
|
||||
#define SPI_INTSTS_TX_FIFO (1 << 1)
|
||||
#define SPI_INTSTS_RX_FIFO (1 << 2)
|
||||
#define SPI_INTSTS_SLAVE_TIMEOUT (1 << 3)
|
||||
#define SPI_INTSTS_SLAVE_TX_UNDERRUN (1 << 4)
|
||||
#define SPI_INTSTS_FIFO_ERR (1 << 5)
|
||||
|
||||
bflb_spi_int_clear
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
说明: 清除 uart 中断标志。
|
||||
说明: 清除 spi 中断标志。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
|
@ -364,8 +365,9 @@ bflb_spi_int_clear
|
|||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
SPI_CR_SPI_STO_CLR
|
||||
SPI_CR_SPI_TXU_CLR
|
||||
#define SPI_INTCLR_TC (1 << 16)
|
||||
#define SPI_INTCLR_SLAVE_TIMEOUT (1 << 19)
|
||||
#define SPI_INTCLR_SLAVE_TX_UNDERRUN (1 << 20)
|
||||
|
||||
bflb_spi_feature_control
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ Macros
|
|||
timer clock source
|
||||
^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
定时器输入时钟源可以选择以下类型，注意： `TIMER_CLKSRC_GPIO` BL602/BL702 系列没有此功能
|
||||
定时器输入时钟源可以选择以下类型，注意： `TIMER_CLKSRC_GPIO` BL602/BL702 系列没有此功能。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
|
@ -22,7 +22,7 @@ timer clock source
|
|||
timer counter mode
|
||||
^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
定时器计数模式分为两种: freerun(向上计数模式)、preload(重装载模式)
|
||||
定时器计数模式分为两种: freerun(向上计数模式)、preload(重装载模式)。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
|
@ -33,7 +33,7 @@ timer counter mode
|
|||
timer compare id
|
||||
^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
定时器一共三个 compare id,用于设置不同的定时时间，当三个定时器使用
|
||||
定时器一共三个 compare id, 用于设置不同的定时时间，可以当三个定时器使用。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
|
|
|||
|
|
@ -228,7 +228,7 @@ bflb_uart_getchar
|
|||
* - dev
|
||||
- 设备句柄
|
||||
* - return
|
||||
- 返回 -1 表示没有数据，返回其他表示接收字符
|
||||
- 返回 -1 表示没有数据，返回其他表示接收的字符
|
||||
|
||||
bflb_uart_txready
|
||||
^^^^^^^^^^^^^^^^^^^^
|
||||
|
|
@ -487,4 +487,13 @@ bflb_uart_feature_control
|
|||
#define UART_CMD_SET_TX_RS485_EN (0x11)
|
||||
#define UART_CMD_SET_TX_RS485_POLARITY (0x12)
|
||||
#define UART_CMD_SET_ABR_ALLOWABLE_ERROR (0x13)
|
||||
#define UART_CMD_SET_SW_RTS_CONTROL (0x14)
|
||||
#define UART_CMD_SET_SW_RTS_CONTROL (0x14)
|
||||
#define UART_CMD_IR_CONFIG (0x15)
|
||||
#define UART_CMD_SET_TX_FREERUN (0x16)
|
||||
#define UART_CMD_SET_TX_END_INTERRUPT (0x17)
|
||||
#define UART_CMD_SET_RX_END_INTERRUPT (0x18)
|
||||
#define UART_CMD_SET_TX_TRANSFER_LEN (0x19)
|
||||
#define UART_CMD_SET_RX_TRANSFER_LEN (0x20)
|
||||
#define UART_CMD_SET_TX_EN (0x21)
|
||||
#define UART_CMD_SET_BCR_END_INTERRUPT (0x22)
|
||||
#define UART_CMD_GET_BCR_COUNT (0x23)
|
||||
|
|
@ -3,12 +3,14 @@ LIBC
|
|||
|
||||
简介
|
||||
------------
|
||||
|
||||
- LIBC 中实现了一个vsnprintf，用以避开使用完整的c库，减少代码体积。
|
||||
|
||||
.. note:: LIBC 中浮点打印只能最大支持到7位小数精度
|
||||
|
||||
配置LIBC相关功能
|
||||
------------
|
||||
-------------------
|
||||
|
||||
如果需要配置LIBC的相关功能需要在对应的工程目录下 `proj.conf` 文件中添加对应的代码，举例如下：
|
||||
|
||||
.. code-block:: cmake
|
||||
|
|
@ -18,9 +20,9 @@ LIBC
|
|||
set(CONFIG_VSNPRINTF_FLOAT 1)
|
||||
|
||||
格式化控制字符
|
||||
------------
|
||||
----------------
|
||||
|
||||
.. list-table::
|
||||
.. list-table::
|
||||
:header-rows: 1
|
||||
|
||||
* - proj.conf 配置项
|
||||
|
|
@ -34,7 +36,7 @@ LIBC
|
|||
* - CONFIG_VSNPRINTF_LONG_LONG
|
||||
- 使能格式化输出 (%lld,%lli,%llo,%llx,%llX,%llu) 长整型格式化支持
|
||||
|
||||
.. list-table::
|
||||
.. list-table::
|
||||
:header-rows: 1
|
||||
|
||||
* - 格式化控制字符 (specifier)
|
||||
|
|
@ -68,7 +70,7 @@ LIBC
|
|||
* - %n
|
||||
- ❌
|
||||
|
||||
.. list-table::
|
||||
.. list-table::
|
||||
:header-rows: 1
|
||||
|
||||
* - 格式化控制变量长度字符 (length)
|
||||
|
|
@ -88,7 +90,7 @@ LIBC
|
|||
* - z
|
||||
- ✔️
|
||||
|
||||
.. list-table::
|
||||
.. list-table::
|
||||
:header-rows: 1
|
||||
|
||||
* - 格式化控制标志字符 (flags)
|
||||
|
|
@ -105,7 +107,7 @@ LIBC
|
|||
- ✔️
|
||||
|
||||
格式化输出格式
|
||||
------------
|
||||
----------------
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
|
|
|
|||
|
|
@ -3,6 +3,7 @@ VLIBC
|
|||
|
||||
简介
|
||||
------------
|
||||
|
||||
- VLIBC 是适用于MCU使用的C标准库 STDIO的重新实现，与标准的STDIO库具有相同的API以及相同的使用方法。
|
||||
- VLIBC 支持文件操作，诸如fopen、fwrite、fprintf等API，与Fatfs文件系统对接，为其他依赖标准C库文件操作的组件提供支持。
|
||||
- VLIBC 同时支持对外设进行操作，例如将UART当做文件进行处理，使用fprintf进行输出。
|
||||
|
|
@ -11,7 +12,8 @@ VLIBC
|
|||
.. note:: VLIBC 中浮点打印只能最大支持到11位小数精度
|
||||
|
||||
配置VLIBC相关功能
|
||||
------------
|
||||
--------------------
|
||||
|
||||
如果需要配置VLIBC的相关功能需要在对应的工程目录下 `proj.conf` 文件中添加对应的代码，举例如下：
|
||||
|
||||
.. code-block:: cmake
|
||||
|
|
@ -21,9 +23,9 @@ VLIBC
|
|||
set(CONFIG_VSNPRINTF_FLOAT 1)
|
||||
|
||||
格式化控制字符
|
||||
------------
|
||||
-----------------
|
||||
|
||||
.. list-table::
|
||||
.. list-table::
|
||||
:header-rows: 1
|
||||
|
||||
* - proj.conf 配置项
|
||||
|
|
@ -41,7 +43,7 @@ VLIBC
|
|||
* - CONFIG_VSNPRINTF_WRITEBACK
|
||||
- 使能格式化字符 (%n) 字符统计支持
|
||||
|
||||
.. list-table::
|
||||
.. list-table::
|
||||
:header-rows: 1
|
||||
|
||||
* - 格式化控制字符 (specifier)
|
||||
|
|
@ -75,7 +77,7 @@ VLIBC
|
|||
* - %n
|
||||
- ✔️
|
||||
|
||||
.. list-table::
|
||||
.. list-table::
|
||||
:header-rows: 1
|
||||
|
||||
* - 格式化控制变量长度字符 (length)
|
||||
|
|
@ -95,7 +97,7 @@ VLIBC
|
|||
* - z
|
||||
- ✔️
|
||||
|
||||
.. list-table::
|
||||
.. list-table::
|
||||
:header-rows: 1
|
||||
|
||||
* - 格式化控制标志字符 (flags)
|
||||
|
|
@ -112,7 +114,8 @@ VLIBC
|
|||
- ✔️
|
||||
|
||||
格式化输出格式
|
||||
------------
|
||||
--------------------
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
|
|
@ -125,7 +128,7 @@ VLIBC
|
|||
printf("% 8x\r\n", var)
|
||||
|
||||
IO 接口移植
|
||||
------------
|
||||
---------------
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
|
@ -187,5 +190,6 @@ IO 接口移植
|
|||
|
||||
API参考
|
||||
------------
|
||||
|
||||
- API 基本与标准C库一致
|
||||
- 等待完善
|
||||
|
|
@ -1,74 +1,74 @@
|
|||
# Configuration file for the Sphinx documentation builder.
|
||||
|
||||
# -- Project information
|
||||
|
||||
project = 'CherryUSB'
|
||||
copyright = '2022, sakumisu'
|
||||
author = 'sakumisu'
|
||||
|
||||
release = '0.4'
|
||||
version = '0.4.0'
|
||||
|
||||
# -- General configuration
|
||||
|
||||
extensions = [
|
||||
'sphinx.ext.duration',
|
||||
'sphinx.ext.doctest',
|
||||
'sphinx.ext.autodoc',
|
||||
'sphinx.ext.autosummary',
|
||||
'sphinx.ext.intersphinx',
|
||||
'recommonmark',
|
||||
'sphinx_markdown_tables'
|
||||
]
|
||||
|
||||
intersphinx_mapping = {
|
||||
# 'python': ('https://docs.python.org/3/', None),
|
||||
# 'sphinx': ('https://www.sphinx-doc.org/en/master/', None),
|
||||
}
|
||||
intersphinx_disabled_domains = ['std']
|
||||
|
||||
templates_path = ['_templates']
|
||||
|
||||
# -- Options for HTML output
|
||||
|
||||
html_theme = 'sphinx_rtd_theme'
|
||||
|
||||
# -- Options for EPUB output
|
||||
epub_show_urls = 'footnote'
|
||||
# Configuration file for the Sphinx documentation builder.
|
||||
|
||||
# -- Project information
|
||||
|
||||
project = 'BL_MCU_SDK'
|
||||
copyright = '2022, Bouffalolab Team'
|
||||
author = 'Bouffalolab Team'
|
||||
|
||||
release = '0.1'
|
||||
version = '0.1.0'
|
||||
|
||||
# -- General configuration
|
||||
|
||||
extensions = [
|
||||
'sphinx.ext.duration',
|
||||
'sphinx.ext.doctest',
|
||||
'sphinx.ext.autodoc',
|
||||
'sphinx.ext.autosummary',
|
||||
'sphinx.ext.intersphinx',
|
||||
'recommonmark',
|
||||
'sphinx_markdown_tables'
|
||||
]
|
||||
|
||||
intersphinx_mapping = {
|
||||
# 'python': ('https://docs.python.org/3/', None),
|
||||
# 'sphinx': ('https://www.sphinx-doc.org/en/master/', None),
|
||||
}
|
||||
intersphinx_disabled_domains = ['std']
|
||||
|
||||
templates_path = ['_templates']
|
||||
|
||||
# -- Options for HTML output
|
||||
|
||||
html_theme = 'sphinx_rtd_theme'
|
||||
|
||||
# -- Options for EPUB output
|
||||
epub_show_urls = 'footnote'
|
||||
# Configuration file for the Sphinx documentation builder.
|
||||
|
||||
# -- Project information
|
||||
|
||||
project = 'CherryUSB'
|
||||
copyright = '2022, sakumisu'
|
||||
author = 'sakumisu'
|
||||
|
||||
release = '0.4'
|
||||
version = '0.4.0'
|
||||
|
||||
# -- General configuration
|
||||
|
||||
extensions = [
|
||||
'sphinx.ext.duration',
|
||||
'sphinx.ext.doctest',
|
||||
'sphinx.ext.autodoc',
|
||||
'sphinx.ext.autosummary',
|
||||
'sphinx.ext.intersphinx',
|
||||
'recommonmark',
|
||||
'sphinx_markdown_tables'
|
||||
]
|
||||
|
||||
intersphinx_mapping = {
|
||||
# 'python': ('https://docs.python.org/3/', None),
|
||||
# 'sphinx': ('https://www.sphinx-doc.org/en/master/', None),
|
||||
}
|
||||
intersphinx_disabled_domains = ['std']
|
||||
|
||||
templates_path = ['_templates']
|
||||
|
||||
# -- Options for HTML output
|
||||
|
||||
html_theme = 'sphinx_rtd_theme'
|
||||
|
||||
# -- Options for EPUB output
|
||||
epub_show_urls = 'footnote'
|
||||
# Configuration file for the Sphinx documentation builder.
|
||||
|
||||
# -- Project information
|
||||
|
||||
project = 'BL_MCU_SDK'
|
||||
copyright = '2022, Bouffalolab Team'
|
||||
author = 'Bouffalolab Team'
|
||||
|
||||
release = '0.1'
|
||||
version = '0.1.0'
|
||||
|
||||
# -- General configuration
|
||||
|
||||
extensions = [
|
||||
'sphinx.ext.duration',
|
||||
'sphinx.ext.doctest',
|
||||
'sphinx.ext.autodoc',
|
||||
'sphinx.ext.autosummary',
|
||||
'sphinx.ext.intersphinx',
|
||||
'recommonmark',
|
||||
'sphinx_markdown_tables'
|
||||
]
|
||||
|
||||
intersphinx_mapping = {
|
||||
# 'python': ('https://docs.python.org/3/', None),
|
||||
# 'sphinx': ('https://www.sphinx-doc.org/en/master/', None),
|
||||
}
|
||||
intersphinx_disabled_domains = ['std']
|
||||
|
||||
templates_path = ['_templates']
|
||||
|
||||
# -- Options for HTML output
|
||||
|
||||
html_theme = 'sphinx_rtd_theme'
|
||||
|
||||
# -- Options for EPUB output
|
||||
epub_show_urls = 'footnote'
|
||||
|
|
|
|||
|
|
@ -37,13 +37,16 @@ CMake 框架的使用
|
|||
- 添加静态库（满足 if 条件）
|
||||
* - sdk_add_subdirectory_ifdef
|
||||
- 编译子目录下的 cmakelist（满足 if 条件）
|
||||
* - sdk_add_static_library
|
||||
- 添加外部静态库
|
||||
* - sdk_set_linker_script
|
||||
- 设置链接脚本
|
||||
* - sdk_set_main_file
|
||||
- 设置 main 函数所在文件
|
||||
* - project
|
||||
- 工程编译
|
||||
|
||||
* - target_source(app PRIVATE xxx)
|
||||
- 添加源文件到 app 库中，当用户需要自己添加一些源文件又不想创建 cmakelist 单独编译成库，可以使用该项
|
||||
|
||||
新建工程
|
||||
----------------
|
||||
|
|
|
|||
|
|
@ -41,54 +41,8 @@
|
|||
使用 CKLink + Eclipse 调试代码
|
||||
-------------------------------------------
|
||||
|
||||
- 从 Bouffalo Lab 开发者社区下载带有 RISC-V 工具链的 `Eclipse 安装包 <https://dev.bouffalolab.com/media/upload/download/BouffaloLab_eclipse_x86_64_win_v1.2.0.zip>`_ 。
|
||||
- 从 T-HEAD 官网下载最新版本 `CKLink 驱动 <https://occ.t-head.cn/community/download?id=4103855596351066112>`_
|
||||
|
||||
安装和配置 Eclipse
|
||||
^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
- 将获取到的 eclipse 压缩包拷贝到您的工作目录，解压 eclipse 压缩包
|
||||
- 进入 eclipse 目录，双击 ``eclipse.exe`` 启动 eclipse
|
||||
- 选择您的 ``Workspace`` 目录，点击 ``Launch`` 进入工作空间
|
||||
|
||||
.. figure:: img/eclipse1.png
|
||||
:alt:
|
||||
|
||||
- 点击菜单栏中 ``Window->preferences`` 打开环境配置相关页面，准备导入相关的配置环境
|
||||
|
||||
.. figure:: img/eclipse2.png
|
||||
:alt:
|
||||
|
||||
- 点击下图 1 处的图标，打开导入配置界面，按照如图所示步骤，选择 ``eclipse.exe`` 目录下的 ``bflb_mcu_preferences.epf`` 配置文件。
|
||||
|
||||
.. figure:: img/eclipse3.png
|
||||
:alt:
|
||||
|
||||
- 选择好对应的文件后，点击 ``Finish``，在弹出的对话框选中点击 ``cancel`` ，不用重新启动。
|
||||
|
||||
.. figure:: img/eclipse4.png
|
||||
:alt:
|
||||
|
||||
- 点击 菜单栏 ``File->Import`` ，打开导入项目的配置界面
|
||||
|
||||
.. figure:: img/eclipse5.png
|
||||
:alt:
|
||||
|
||||
- 在打开的 ``Import`` 窗口中选择 ``C/C++->Existing Code as Makefile Project`` ，然后点击 ``Next``
|
||||
|
||||
.. figure:: img/eclipse6.png
|
||||
:alt:
|
||||
|
||||
- 导入 bl_mcu_sdk 的工程路径后，点击 ``Finsh`` 完成
|
||||
|
||||
.. figure:: img/eclipse7.png
|
||||
:alt:
|
||||
|
||||
- 最终效果如下
|
||||
|
||||
.. figure:: img/eclipse8.png
|
||||
:alt:
|
||||
|
||||
安装和配置 CKLink
|
||||
^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
|
|
@ -105,23 +59,7 @@
|
|||
.. figure:: img/cklink3.png
|
||||
:alt:
|
||||
|
||||
|
||||
调试 ELF
|
||||
使用 Eclipse 调试
|
||||
^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
完成上述两步以后，如果是在 **flash 上调试，需要先将 bin 文件烧录到芯片中** ，最后才能够进行下面的调试环节。
|
||||
|
||||
- 在 Eclipse 中 点击 `debug` 图标，并点击 `Debug Configurations`
|
||||
|
||||
.. figure:: img/eclipse9.png
|
||||
:alt:
|
||||
|
||||
- 左侧打开 `GDB Hardware Debugging`，选择对应芯片的配置按钮，并导入编译生成的 **elf**,最后点击 `Debug`
|
||||
|
||||
.. figure:: img/eclipse10.png
|
||||
:alt:
|
||||
|
||||
- 最终进入调试界面
|
||||
|
||||
.. figure:: img/eclipse11.png
|
||||
:alt:
|
||||
参考 :ref:`eclipse_gcc`
|
||||
|
|
|
|||
69
docs/source/get_started/eclipse.rst
Normal file
69
docs/source/get_started/eclipse.rst
Normal file
|
|
@ -0,0 +1,69 @@
|
|||
.. _eclipse_gcc:
|
||||
|
||||
Build and Debug with Eclipse
|
||||
=================================
|
||||
|
||||
本节主要介绍如何使用 Eclipse 进行开发。
|
||||
|
||||
环境搭建
|
||||
-------------
|
||||
|
||||
- 首先下载 `Eclipse <https://www.eclipse.org/downloads/packages>`_ , 选择 **Eclipse IDE for C/C++ Developers** , 并根据你的电脑版本进行下载。
|
||||
|
||||
.. figure:: img/eclipse1.png
|
||||
:alt:
|
||||
|
||||
- 其余需要的环境参考 :ref:`windows_cmd`
|
||||
|
||||
- 解压 Eclipse 并双击打开 `Eclipse.exe`
|
||||
|
||||
.. figure:: img/eclipse2.png
|
||||
:alt:
|
||||
|
||||
- 选择工作路径并点击 `Launch`
|
||||
|
||||
.. figure:: img/eclipse3.png
|
||||
:alt:
|
||||
|
||||
- 点击左上角 `File` 选择 `Import`，选择 `General > Existing project into workspace` 并点击 `Next`
|
||||
|
||||
.. figure:: img/eclipse4.png
|
||||
:alt:
|
||||
|
||||
- 导入 bl_mcu_sdk
|
||||
|
||||
.. figure:: img/eclipse5.png
|
||||
:alt:
|
||||
|
||||
编译
|
||||
-------------
|
||||
|
||||
- 双击 `Build Targets` 中的 `make` 即可编译 helloworld。双击 `clean` 即可清除 helloworld 下的缓存
|
||||
|
||||
.. figure:: img/eclipse6.png
|
||||
:alt:
|
||||
|
||||
- 如果需要更换 demo ，右击 `Build Targets` 中的 `make`，修改中间方框里的内容即可，内容为指定 demo 下 Makefile 文件的路径
|
||||
|
||||
.. figure:: img/eclipse7.png
|
||||
:alt:
|
||||
|
||||
调试
|
||||
-------------
|
||||
|
||||
完成上述步骤以后，如果是在 **flash 上调试，需要先将 bin 文件烧录到芯片中** ，然后才能够进行下面的调试环节。
|
||||
|
||||
- 在 Eclipse 中 点击 `debug` 图标，并点击 `Debug Configurations`
|
||||
|
||||
.. figure:: img/eclipse8.png
|
||||
:alt:
|
||||
|
||||
- 左侧打开 `GDB Hardware Debugging`，选择对应芯片的配置按钮，并导入编译生成的 **elf**, 最后点击 `Debug`
|
||||
|
||||
.. figure:: img/eclipse9.png
|
||||
:alt:
|
||||
|
||||
- 最终进入调试界面
|
||||
|
||||
.. figure:: img/eclipse10.png
|
||||
:alt:
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 11 KiB After Width: | Height: | Size: 31 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 65 KiB After Width: | Height: | Size: 63 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 79 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 178 KiB After Width: | Height: | Size: 35 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 156 KiB After Width: | Height: | Size: 15 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 43 KiB After Width: | Height: | Size: 29 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 44 KiB After Width: | Height: | Size: 33 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 33 KiB After Width: | Height: | Size: 53 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 26 KiB After Width: | Height: | Size: 15 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 28 KiB After Width: | Height: | Size: 6.6 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 9.8 KiB After Width: | Height: | Size: 70 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 21 KiB After Width: | Height: | Size: 135 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 43 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 41 KiB |
|
|
@ -10,3 +10,4 @@ BL MCU SDK 提供了以下几种开发环境，包含安装、编译、烧录和
|
|||
Windows_CDK <windows_cdk>
|
||||
Windows_CMD <windows_cmd>
|
||||
Linux or WSL <linux_wsl>
|
||||
Eclipse <eclipse>
|
||||
|
|
|
|||
|
|
@ -1,32 +1,23 @@
|
|||
Linux or WSL
|
||||
.. _linux_cmd:
|
||||
|
||||
Build with Linux or WSL
|
||||
================================
|
||||
|
||||
本节主要介绍如何在 Linux 或者 WSL 下使用 **命令行** 进行开发。Windows 下如何安装 WSL 请自行百度。
|
||||
|
||||
安装
|
||||
环境搭建
|
||||
-----------------
|
||||
|
||||
安装前需要下载好 git 工具。
|
||||
- 首先打开 linux 终端，并安装依赖工具
|
||||
|
||||
.. code-block:: bash
|
||||
:linenos:
|
||||
:emphasize-lines: 1
|
||||
|
||||
$ cd ~
|
||||
$ sudo apt install git
|
||||
$ sudo apt install git make ninja-build -y
|
||||
|
||||
安装 make
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
.. code-block:: bash
|
||||
:linenos:
|
||||
:emphasize-lines: 1
|
||||
|
||||
$ cd ~
|
||||
$ sudo apt install make
|
||||
|
||||
安装 RISC-V 工具链
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
- 其次使用 git 下载 RISC-V 工具链
|
||||
|
||||
.. code-block:: bash
|
||||
:linenos:
|
||||
|
|
@ -38,10 +29,7 @@ Linux or WSL
|
|||
$ echo "export PATH=\"$PATH:/usr/bin/toolchain_gcc_t-head_linux/bin\"" >> ~/.bashrc
|
||||
$ source ~/.bashrc
|
||||
|
||||
安装检查
|
||||
-------------
|
||||
|
||||
完成上述两步以后，需要检查是否真的安装成功。打开 linux 终端。输入下列命令：
|
||||
- 完成上述步骤以后，需要检查是否真的安装成功，输入下列命令：
|
||||
|
||||
.. code-block:: bash
|
||||
:linenos:
|
||||
|
|
@ -60,7 +48,6 @@ Linux or WSL
|
|||
This is free software: you are free to change and redistribute it.
|
||||
There is NO WARRANTY, to the extent permitted by law.
|
||||
|
||||
|
||||
.. code-block:: bash
|
||||
:linenos:
|
||||
|
||||
|
|
@ -81,7 +68,7 @@ Linux or WSL
|
|||
gcc version 10.2.0 (Xuantie-900 elf newlib gcc Toolchain V2.2.5 B-20220323)
|
||||
|
||||
|
||||
在 linux 中，有严格的权限限制，通常一个用户对应一个权限，所以如果提示下面信息，表示需要设置 cmake 权限。
|
||||
- 在 linux 中，有严格的权限限制，通常一个用户对应一个权限，所以如果提示下面信息，表示需要设置 cmake 权限。
|
||||
|
||||
.. figure:: img/cmake_error.png
|
||||
:align: center
|
||||
|
|
@ -91,17 +78,28 @@ Linux or WSL
|
|||
.. code-block:: bash
|
||||
:linenos:
|
||||
|
||||
$ cd bl_mcu_sdk
|
||||
$ sudo chmod +x tools/cmake/bin/cmake
|
||||
|
||||
编译
|
||||
-------------
|
||||
|
||||
进入 **examples** ,选择你想要编译的 case，且该 case 下必须有 **main.c** 文件。生成的 bin 文件会输出到 `build/build_out` 目录下。
|
||||
打开 linux 终端，进入 **examples** ，选择你想要编译的 case，且该 case 下必须有 **Makefile** 文件。使用下面命令编译，生成的 bin 文件会输出到 `build/build_out` 目录下。
|
||||
|
||||
- 使用 make 编译
|
||||
|
||||
.. code-block:: bash
|
||||
:linenos:
|
||||
|
||||
$ cd .\examples\helloworld\
|
||||
$ cd examples/helloworld
|
||||
$ make CHIP=chip_name BOARD=board_name ## chip_name 为芯片型号，可以填写 bl702、bl616、bl808、bl606p, board_name 为开发板名称，详见 bsp/board 目录
|
||||
|
||||
- 使用 ninja 编译
|
||||
|
||||
.. code-block:: bash
|
||||
:linenos:
|
||||
|
||||
$ cd examples/helloworld
|
||||
$ make ninja CHIP=chip_name BOARD=board_name ## chip_name 为芯片型号，可以填写 bl702、bl616、bl808、bl606p, board_name 为开发板名称，详见 bsp/board 目录
|
||||
|
||||
.. note :: 如果使用 BL808 或者 BL606P，需要在上面基础上添加 CPU_ID=id ,id 可以为 m0 或者 d0
|
||||
|
|
@ -1,2 +1,2 @@
|
|||
Windows CDK
|
||||
==============
|
||||
Build and Debug with CDK
|
||||
============================
|
||||
|
|
@ -1,44 +1,29 @@
|
|||
Windows CMD
|
||||
==============
|
||||
.. _windows_cmd:
|
||||
|
||||
Build with Windows CMD
|
||||
============================
|
||||
|
||||
本节主要介绍如何在 Windows 下使用 **命令行** 进行开发。
|
||||
|
||||
安装
|
||||
环境搭建
|
||||
-----------------
|
||||
|
||||
安装前需要下载好 git 工具。这里自行百度。
|
||||
|
||||
安装 make
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
在 `bl_mcu_sdk/tools/make` 目录下已经准备好了 windows 版本的 make 工具，将 make 工具的绝对路径配置到系统环境变量即可。如图所示：
|
||||
|
||||
.. figure:: img/windows_path.png
|
||||
:align: center
|
||||
|
||||
.. figure:: img/windows_path2.png
|
||||
:align: center
|
||||
|
||||
安装 RISC-V 工具链
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
克隆 windows 端工具链到你的目录。
|
||||
- 首先需要安装 git 工具，这里自行百度。
|
||||
- 使用 git 下载 RISC-V 工具链, 这里比如安装到 D 盘
|
||||
|
||||
.. code-block:: bash
|
||||
:linenos:
|
||||
:emphasize-lines: 1
|
||||
|
||||
$ cd d
|
||||
$ git clone git@gitee.com:bouffalolab/toolchain_gcc_t-head_windows.git
|
||||
|
||||
设置工具链的路径到环境变量中, 如图所示：
|
||||
- 将 make、ninja、下载的 risc-v 工具链路径配置到系统环境变量中, 其中 make 和 ninja 工具位于 `bl_mcu_sdk/tools` 目录下。
|
||||
|
||||
.. figure:: img/windows_path3.png
|
||||
:align: center
|
||||
.. figure:: img/windows_path.png
|
||||
:alt:
|
||||
|
||||
安装检查
|
||||
-------------
|
||||
|
||||
完成上述两步以后，需要检查是否真的安装成功。打开 powershell 或者 cmd。输入下列命令：
|
||||
- 完成上述步骤以后，需要检查是否真的安装成功。打开 powershell 或者 cmd，输入下列命令：
|
||||
|
||||
.. code-block:: bash
|
||||
:linenos:
|
||||
|
|
@ -79,7 +64,9 @@ Windows CMD
|
|||
编译
|
||||
-------------
|
||||
|
||||
进入 **examples** ,选择你想要编译的 case，且该 case 下必须有 **main.c** 文件。生成的 bin 文件会输出到 `build/build_out` 目录下。
|
||||
打开 powershell 或者 cmd，进入 **examples** ，选择你想要编译的 case，且该 case 下必须有 **Makefile** 文件。使用下面命令编译，生成的 bin 文件会输出到 `build/build_out` 目录下。
|
||||
|
||||
- 使用 make 编译
|
||||
|
||||
.. code-block:: bash
|
||||
:linenos:
|
||||
|
|
@ -87,4 +74,12 @@ Windows CMD
|
|||
$ cd .\examples\helloworld\
|
||||
$ make CHIP=chip_name BOARD=board_name ## chip_name 为芯片型号，可以填写 bl702、bl616、bl808、bl606p, board_name 为开发板名称，详见 bsp/board 目录
|
||||
|
||||
- 使用 ninja 编译
|
||||
|
||||
.. code-block:: bash
|
||||
:linenos:
|
||||
|
||||
$ cd .\examples\helloworld\
|
||||
$ make ninja CHIP=chip_name BOARD=board_name ## chip_name 为芯片型号，可以填写 bl702、bl616、bl808、bl606p, board_name 为开发板名称，详见 bsp/board 目录
|
||||
|
||||
.. note :: 如果使用 BL808 或者 BL606P，需要在上面基础上添加 CPU_ID=id ,id 可以为 m0 或者 d0
|
||||
|
|
@ -30,3 +30,19 @@ BL MCU SDK 使用指南
|
|||
:caption: 基础例程
|
||||
|
||||
samples/peripherals/index
|
||||
samples/components/index
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
:caption: 进阶例程
|
||||
|
||||
advance_samples/index
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
:caption: 应用笔记
|
||||
|
||||
notes/note_uart
|
||||
notes/note_dma
|
||||
notes/note_cache
|
||||
notes/note_808dualcore
|
||||
|
|
|
|||
BIN
docs/source/notes/img/devcube_808.png
Normal file
BIN
docs/source/notes/img/devcube_808.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 17 KiB |
BIN
docs/source/notes/img/dma_lli.png
Normal file
BIN
docs/source/notes/img/dma_lli.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 5.2 KiB |
325
docs/source/notes/img/dma_lli.svg
Normal file
325
docs/source/notes/img/dma_lli.svg
Normal file
|
|
@ -0,0 +1,325 @@
|
|||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<svg
|
||||
xmlns:dc="http://purl.org/dc/elements/1.1/"
|
||||
xmlns:cc="http://creativecommons.org/ns#"
|
||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
|
||||
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
|
||||
version="1.1"
|
||||
id="svg2"
|
||||
xml:space="preserve"
|
||||
width="597.82666"
|
||||
height="527.54669"
|
||||
viewBox="0 0 597.82666 527.54669"
|
||||
sodipodi:docname="DMALLI_common.svg"
|
||||
inkscape:version="1.0.1 (3bc2e813f5, 2020-09-07)"><metadata
|
||||
id="metadata8"><rdf:RDF><cc:Work
|
||||
rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
|
||||
rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title></dc:title></cc:Work></rdf:RDF></metadata><defs
|
||||
id="defs6" /><sodipodi:namedview
|
||||
pagecolor="#ffffff"
|
||||
bordercolor="#666666"
|
||||
borderopacity="1"
|
||||
objecttolerance="10"
|
||||
gridtolerance="10"
|
||||
guidetolerance="10"
|
||||
inkscape:pageopacity="0"
|
||||
inkscape:pageshadow="2"
|
||||
inkscape:window-width="786"
|
||||
inkscape:window-height="480"
|
||||
id="namedview4"
|
||||
showgrid="false"
|
||||
inkscape:zoom="1.6093362"
|
||||
inkscape:cx="298.91333"
|
||||
inkscape:cy="263.77335"
|
||||
inkscape:window-x="0"
|
||||
inkscape:window-y="0"
|
||||
inkscape:window-maximized="0"
|
||||
inkscape:current-layer="g10" /><g
|
||||
id="g10"
|
||||
inkscape:groupmode="layer"
|
||||
inkscape:label="ink_ext_XXXXXX"
|
||||
transform="matrix(1.3333333,0,0,-1.3333333,0,527.54667)"><g
|
||||
id="g12"
|
||||
transform="scale(0.1)"><path
|
||||
d="m 1582.11,3101.27 h 848.22 v 144.79 h -848.22 v -144.79 0 z"
|
||||
style="fill:none;stroke:#0e0f0f;stroke-width:5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path14" /><g
|
||||
id="g16"
|
||||
transform="scale(10)"><text
|
||||
transform="matrix(1,0,0,-0.99580765,161.634,314.298)"
|
||||
style="font-variant:normal;font-weight:normal;font-size:10.2595px;font-family:'Microsoft Sans Serif';-inkscape-font-specification:MicrosoftSansSerif;writing-mode:lr-tb;fill:#0e0f0f;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
id="text20"><tspan
|
||||
x="0 7.048831 12.816023 17.946886 21.783995 26.91375 32.68055 35.252815 42.300869 48.06768 53.198555 57.036846 62.803661 67.933418"
|
||||
y="0"
|
||||
sodipodi:role="line"
|
||||
id="tspan18">Source Address</tspan></text></g><path
|
||||
d="m 1582.11,2956.46 h 848.22 v 144.81 h -848.22 v -144.81 0 z"
|
||||
style="fill:none;stroke:#0e0f0f;stroke-width:5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path22" /><g
|
||||
id="g24"
|
||||
transform="scale(10)"><text
|
||||
transform="matrix(1,0,0,-0.99580765,161.634,299.821)"
|
||||
style="font-variant:normal;font-weight:normal;font-size:10.2595px;font-family:'Microsoft Sans Serif';-inkscape-font-specification:MicrosoftSansSerif;writing-mode:lr-tb;fill:#0e0f0f;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
id="text28"><tspan
|
||||
x="0 7.6859436 12.817978 17.947735 21.14657 23.717667 30.765717 36.532906 42.30088 45.511829 51.279812 56.408714"
|
||||
y="0"
|
||||
sodipodi:role="line"
|
||||
id="tspan26">Dest Address</tspan></text></g><path
|
||||
d="m 1582.11,2811.66 h 848.22 v 144.8 h -848.22 v -144.8 0 z"
|
||||
style="fill:none;stroke:#0e0f0f;stroke-width:5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path30" /><g
|
||||
id="g32"
|
||||
transform="scale(10)"><text
|
||||
transform="matrix(1,0,0,-0.99580765,161.634,285.345)"
|
||||
style="font-variant:normal;font-weight:normal;font-size:10.2595px;font-family:'Microsoft Sans Serif';-inkscape-font-specification:MicrosoftSansSerif;writing-mode:lr-tb;fill:#0e0f0f;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
id="text36"><tspan
|
||||
x="0 7.6859436 12.817978 17.947735 21.14657 23.717667 29.484858 35.252831"
|
||||
y="0"
|
||||
sodipodi:role="line"
|
||||
id="tspan34">Next LLI</tspan></text></g><path
|
||||
d="m 1582.11,2666.86 h 848.22 v 144.8 h -848.22 v -144.8 0 z"
|
||||
style="fill:none;stroke:#0e0f0f;stroke-width:5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path38" /><g
|
||||
id="g40"
|
||||
transform="scale(10)"><text
|
||||
transform="matrix(1,0,0,-0.99580765,161.634,270.861)"
|
||||
style="font-variant:normal;font-weight:normal;font-size:10.2595px;font-family:'Microsoft Sans Serif';-inkscape-font-specification:MicrosoftSansSerif;writing-mode:lr-tb;fill:#0e0f0f;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
id="text44"><tspan
|
||||
x="0 7.6859436 16.028137 23.075016 25.646893 32.707054 38.474247 44.242229 47.441055 50.653175 56.419991"
|
||||
y="0"
|
||||
sodipodi:role="line"
|
||||
id="tspan42">DMA Control</tspan></text></g><path
|
||||
d="m 2006.22,2425.52 h 848.23 v 144.81 h -848.23 v -144.81 0 z"
|
||||
style="fill:none;stroke:#0e0f0f;stroke-width:5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path46" /><g
|
||||
id="g48"
|
||||
transform="scale(10)"><text
|
||||
transform="matrix(1,0,0,-0.99580765,204.041,246.728)"
|
||||
style="font-variant:normal;font-weight:normal;font-size:10.2595px;font-family:'Microsoft Sans Serif';-inkscape-font-specification:MicrosoftSansSerif;writing-mode:lr-tb;fill:#0e0f0f;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
id="text52"><tspan
|
||||
x="0 7.0480504 12.814863 17.946911 21.784031 26.913786 32.680599 35.251694 42.299744 48.06773 53.198605 57.035725 62.802929 67.932686"
|
||||
y="0"
|
||||
sodipodi:role="line"
|
||||
id="tspan50">Source Address</tspan></text></g><path
|
||||
d="m 2006.22,2280.72 h 848.23 v 144.8 h -848.23 v -144.8 0 z"
|
||||
style="fill:none;stroke:#0e0f0f;stroke-width:5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path54" /><g
|
||||
id="g56"
|
||||
transform="scale(10)"><text
|
||||
transform="matrix(1,0,0,-0.99580765,204.041,232.251)"
|
||||
style="font-variant:normal;font-weight:normal;font-size:10.2595px;font-family:'Microsoft Sans Serif';-inkscape-font-specification:MicrosoftSansSerif;writing-mode:lr-tb;fill:#0e0f0f;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
id="text60"><tspan
|
||||
x="0 7.685956 12.817221 17.946978 21.146193 23.717287 30.764946 36.532932 42.300137 45.511082 51.279068 56.408825"
|
||||
y="0"
|
||||
sodipodi:role="line"
|
||||
id="tspan58">Dest Address</tspan></text></g><path
|
||||
d="m 2006.22,2135.92 h 848.23 v 144.8 h -848.23 v -144.8 0 z"
|
||||
style="fill:none;stroke:#0e0f0f;stroke-width:5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path62" /><g
|
||||
id="g64"
|
||||
transform="scale(10)"><text
|
||||
transform="matrix(1,0,0,-0.99580765,204.041,217.767)"
|
||||
style="font-variant:normal;font-weight:normal;font-size:10.2595px;font-family:'Microsoft Sans Serif';-inkscape-font-specification:MicrosoftSansSerif;writing-mode:lr-tb;fill:#0e0f0f;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
id="text68"><tspan
|
||||
x="0 7.685956 12.817221 17.946978 21.146193 23.717287 29.485271 35.252087"
|
||||
y="0"
|
||||
sodipodi:role="line"
|
||||
id="tspan66">Next LLI</tspan></text></g><path
|
||||
d="m 2006.22,1991.12 h 848.23 v 144.8 h -848.23 v -144.8 0 z"
|
||||
style="fill:none;stroke:#0e0f0f;stroke-width:5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path70" /><g
|
||||
id="g72"
|
||||
transform="scale(10)"><text
|
||||
transform="matrix(1,0,0,-0.99580765,204.041,203.283)"
|
||||
style="font-variant:normal;font-weight:normal;font-size:10.2595px;font-family:'Microsoft Sans Serif';-inkscape-font-specification:MicrosoftSansSerif;writing-mode:lr-tb;fill:#0e0f0f;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
id="text76"><tspan
|
||||
x="0 7.685956 16.026978 23.075027 25.646124 32.707081 38.473892 44.241096 47.439919 50.652042 56.419243"
|
||||
y="0"
|
||||
sodipodi:role="line"
|
||||
id="tspan74">DMA Control</tspan></text></g><path
|
||||
d="m 2284.92,1749.78 h 848.23 v 144.8 h -848.23 v -144.8 0 z"
|
||||
style="fill:none;stroke:#0e0f0f;stroke-width:5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path78" /><g
|
||||
id="g80"
|
||||
transform="scale(10)"><text
|
||||
transform="matrix(1,0,0,-0.99580765,231.908,179.15)"
|
||||
style="font-variant:normal;font-weight:normal;font-size:10.2595px;font-family:'Microsoft Sans Serif';-inkscape-font-specification:MicrosoftSansSerif;writing-mode:lr-tb;fill:#0e0f0f;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
id="text84"><tspan
|
||||
x="0 7.0476594 12.814863 17.946909 21.784031 26.913786 32.680988 35.252869 42.300137 48.068123 53.198997 57.036118 62.802929 67.932686"
|
||||
y="0"
|
||||
sodipodi:role="line"
|
||||
id="tspan82">Source Address</tspan></text></g><path
|
||||
d="m 2284.92,1604.99 h 848.23 v 144.79 h -848.23 v -144.79 0 z"
|
||||
style="fill:none;stroke:#0e0f0f;stroke-width:5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path86" /><g
|
||||
id="g88"
|
||||
transform="scale(10)"><text
|
||||
transform="matrix(1,0,0,-0.99580765,231.908,164.673)"
|
||||
style="font-variant:normal;font-weight:normal;font-size:10.2595px;font-family:'Microsoft Sans Serif';-inkscape-font-specification:MicrosoftSansSerif;writing-mode:lr-tb;fill:#0e0f0f;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
id="text92"><tspan
|
||||
x="0 7.685956 12.816832 17.946587 21.145411 23.716507 30.764557 36.532543 42.299744 45.510693 51.278679 56.408432"
|
||||
y="0"
|
||||
sodipodi:role="line"
|
||||
id="tspan90">Dest Address</tspan></text></g><path
|
||||
d="m 2284.92,1460.18 h 848.23 v 144.81 h -848.23 v -144.81 0 z"
|
||||
style="fill:none;stroke:#0e0f0f;stroke-width:5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path94" /><g
|
||||
id="g96"
|
||||
transform="scale(10)"><text
|
||||
transform="matrix(1,0,0,-0.99580765,231.908,150.189)"
|
||||
style="font-variant:normal;font-weight:normal;font-size:10.2595px;font-family:'Microsoft Sans Serif';-inkscape-font-specification:MicrosoftSansSerif;writing-mode:lr-tb;fill:#0e0f0f;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
id="text100"><tspan
|
||||
x="0 7.685956 12.816832 17.946587 21.145411 23.716507 29.484491 35.252476"
|
||||
y="0"
|
||||
sodipodi:role="line"
|
||||
id="tspan98">Next LLI</tspan></text></g><path
|
||||
d="m 2284.92,1315.39 h 848.23 v 144.79 h -848.23 v -144.79 0 z"
|
||||
style="fill:none;stroke:#0e0f0f;stroke-width:5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path102" /><g
|
||||
id="g104"
|
||||
transform="scale(10)"><text
|
||||
transform="matrix(1,0,0,-0.99580765,231.908,135.712)"
|
||||
style="font-variant:normal;font-weight:normal;font-size:10.2595px;font-family:'Microsoft Sans Serif';-inkscape-font-specification:MicrosoftSansSerif;writing-mode:lr-tb;fill:#0e0f0f;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
id="text108"><tspan
|
||||
x="0 7.685956 16.026978 23.075027 25.645733 32.706688 38.473892 44.240704 47.439919 50.652042 56.420025"
|
||||
y="0"
|
||||
sodipodi:role="line"
|
||||
id="tspan106">DMA Control</tspan></text></g><path
|
||||
d="m 2612.09,1074.05 h 848.24 v 144.79 h -848.24 v -144.79 0 z"
|
||||
style="fill:none;stroke:#0e0f0f;stroke-width:5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path110" /><g
|
||||
id="g112"
|
||||
transform="scale(10)"><text
|
||||
transform="matrix(1,0,0,-0.99580765,264.626,111.572)"
|
||||
style="font-variant:normal;font-weight:normal;font-size:10.2595px;font-family:'Microsoft Sans Serif';-inkscape-font-specification:MicrosoftSansSerif;writing-mode:lr-tb;fill:#0e0f0f;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
id="text116"><tspan
|
||||
x="0 7.0480504 12.816035 17.947691 21.784811 26.914568 32.68177 35.252476 42.300526 48.068512 53.199776 57.036507 62.803707 67.933464"
|
||||
y="0"
|
||||
sodipodi:role="line"
|
||||
id="tspan114">Source Address</tspan></text></g><path
|
||||
d="m 2612.09,929.238 h 848.24 v 144.812 h -848.24 v -144.812 0 z"
|
||||
style="fill:none;stroke:#0e0f0f;stroke-width:5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path118" /><g
|
||||
id="g120"
|
||||
transform="scale(10)"><text
|
||||
transform="matrix(1,0,0,-0.99580765,264.626,97.1031)"
|
||||
style="font-variant:normal;font-weight:normal;font-size:10.2595px;font-family:'Microsoft Sans Serif';-inkscape-font-specification:MicrosoftSansSerif;writing-mode:lr-tb;fill:#0e0f0f;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
id="text124"><tspan
|
||||
x="0 7.686738 12.818003 17.947758 21.146975 23.718069 30.766119 36.534103 42.300919 45.511864 51.27985 56.409607"
|
||||
y="0"
|
||||
sodipodi:role="line"
|
||||
id="tspan122">Dest Address</tspan></text></g><path
|
||||
d="m 2612.09,784.441 h 848.24 v 144.797 h -848.24 v -144.797 0 z"
|
||||
style="fill:none;stroke:#0e0f0f;stroke-width:5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path126" /><g
|
||||
id="g128"
|
||||
transform="scale(10)"><text
|
||||
transform="matrix(1,0,0,-0.99580765,264.626,82.6191)"
|
||||
style="font-variant:normal;font-weight:normal;font-size:10.2595px;font-family:'Microsoft Sans Serif';-inkscape-font-specification:MicrosoftSansSerif;writing-mode:lr-tb;fill:#0e0f0f;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
id="text132"><tspan
|
||||
x="0 7.686738 12.818003 17.947758 21.146975 23.718069 29.486053 35.252865"
|
||||
y="0"
|
||||
sodipodi:role="line"
|
||||
id="tspan130">Next LLI</tspan></text></g><path
|
||||
d="m 2612.09,639.641 h 848.24 v 144.8 h -848.24 v -144.8 0 z"
|
||||
style="fill:none;stroke:#0e0f0f;stroke-width:5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path134" /><g
|
||||
id="g136"
|
||||
transform="scale(10)"><text
|
||||
transform="matrix(1,0,0,-0.99580765,264.626,68.134)"
|
||||
style="font-variant:normal;font-weight:normal;font-size:10.2595px;font-family:'Microsoft Sans Serif';-inkscape-font-specification:MicrosoftSansSerif;writing-mode:lr-tb;fill:#0e0f0f;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
id="text140"><tspan
|
||||
x="0 7.686738 16.02776 23.075809 25.646906 32.707081 38.475063 44.241879 47.441093 50.652821 56.420025"
|
||||
y="0"
|
||||
sodipodi:role="line"
|
||||
id="tspan138">DMA Control</tspan></text></g><path
|
||||
d="m 2430.33,2884.06 h 169.65 v -271.59"
|
||||
style="fill:none;stroke:#0e0f0f;stroke-width:5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path142" /><path
|
||||
d="m 2599.98,2570.33 -27.96,55.68 c 17.6,-8.77 38.32,-8.77 55.91,0 l -27.95,-55.68 v 0 0"
|
||||
style="fill:#0e0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none"
|
||||
id="path144" /><path
|
||||
d="m 2856.87,2208.32 h 169.65 v -271.59"
|
||||
style="fill:none;stroke:#0e0f0f;stroke-width:5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path146" /><path
|
||||
d="m 3026.52,1894.58 -27.96,55.69 c 17.6,-8.77 38.32,-8.77 55.92,0 l -27.96,-55.69 v 0 0"
|
||||
style="fill:#0e0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none"
|
||||
id="path148" /><path
|
||||
d="M 3133.15,1532.58 H 3302.8 V 1260.99"
|
||||
style="fill:none;stroke:#0e0f0f;stroke-width:5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path150" /><path
|
||||
d="m 3302.8,1218.84 -27.96,55.69 c 17.59,-8.76 38.32,-8.76 55.92,0 l -27.96,-55.69 v 0 0"
|
||||
style="fill:#0e0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none"
|
||||
id="path152" /><path
|
||||
d="m 1218.58,3473.99 h 848.23 v 170.28 h -848.23 v -170.28 0 z"
|
||||
style="fill:none;stroke:#0e0f0f;stroke-width:5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path154" /><g
|
||||
id="g156"
|
||||
transform="scale(10)"><text
|
||||
transform="matrix(1,0,0,-0.99580765,152.869,352.845)"
|
||||
style="font-variant:normal;font-weight:normal;font-size:10.2595px;font-family:'Microsoft Sans Serif';-inkscape-font-specification:MicrosoftSansSerif;writing-mode:lr-tb;fill:#0e0f0f;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
id="text160"><tspan
|
||||
x="0 2.5730548 10.258999 16.026972"
|
||||
y="0"
|
||||
sodipodi:role="line"
|
||||
id="tspan158">IDLE</tspan></text></g><path
|
||||
d="m 2066.81,3559.8 h 169.64 v -271.59"
|
||||
style="fill:none;stroke:#0e0f0f;stroke-width:5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path162" /><path
|
||||
d="m 2236.45,3246.06 -27.96,55.68 c 17.61,-8.76 38.32,-8.76 55.92,0 l -27.96,-55.68 v 0 0"
|
||||
style="fill:#0e0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none"
|
||||
id="path164" /><g
|
||||
id="g166"
|
||||
transform="scale(10)"><text
|
||||
transform="matrix(1,0,0,-0.99580765,227.064,344.4)"
|
||||
style="font-variant:normal;font-weight:normal;font-size:10.2595px;font-family:'Microsoft Sans Serif';-inkscape-font-specification:MicrosoftSansSerif;writing-mode:lr-tb;fill:#0e0f0f;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
id="text182"><tspan
|
||||
x="0 5.1297555 10.896568 16.663773 22.431757 28.19857 33.330616 35.885704 38.456799 44.224785 49.990814 55.758801 61.525612 64.080704"
|
||||
y="0"
|
||||
sodipodi:role="line"
|
||||
id="tspan168">channel enable</tspan><tspan
|
||||
x="36.352001 38.925041 44.691856 47.891853 54.302013 61.36219 68.409851 74.178223 79.945038 85.07708 87.632172 93.445076"
|
||||
y="61.704788"
|
||||
sodipodi:role="line"
|
||||
id="tspan170">IntTCEnable=</tspan><tspan
|
||||
x="36.352001"
|
||||
y="74.01339"
|
||||
id="tspan172">0</tspan><tspan
|
||||
x="79.977089 82.550133 88.316948 91.516945 97.927109 104.98728 112.03494 117.80331 123.57013 128.70218 131.25726 137.07018"
|
||||
y="129.55916"
|
||||
sodipodi:role="line"
|
||||
id="tspan174">IntTCEnable=</tspan><tspan
|
||||
x="79.977089"
|
||||
y="141.8756"
|
||||
id="tspan176">0</tspan><tspan
|
||||
x="107.85216 110.42519 116.19201 119.39201 125.80217 132.86234 139.91 145.67838 151.44519 156.57724 159.13232 164.93742"
|
||||
y="197.42175"
|
||||
sodipodi:role="line"
|
||||
id="tspan178">IntTCEnable=</tspan><tspan
|
||||
x="107.85216"
|
||||
y="209.73117"
|
||||
id="tspan180">0</tspan></text></g><path
|
||||
d="M 3036.21,639.641 V 350.031 H 1097.41 V 3547.73 h 78.85"
|
||||
style="fill:none;stroke:#0e0f0f;stroke-width:5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path184" /><path
|
||||
d="m 1218.58,3547.73 -55.92,-27.84 c 8.81,17.53 8.81,38.16 0,55.68 l 55.92,-27.84 v 0 0"
|
||||
style="fill:#0e0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none"
|
||||
id="path186" /><g
|
||||
id="g188"
|
||||
transform="scale(10)"><text
|
||||
transform="matrix(1,0,0,-0.99580765,43.9781,192.454)"
|
||||
style="font-variant:normal;font-weight:normal;font-size:10.2595px;font-family:'Microsoft Sans Serif';-inkscape-font-specification:MicrosoftSansSerif;writing-mode:lr-tb;fill:#0e0f0f;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
id="text194"><tspan
|
||||
x="0 2.5730517 8.3406401 11.539861 17.950415 25.010576 32.059025 37.826614 43.593811 48.725067 51.280151 57.077816"
|
||||
y="0"
|
||||
sodipodi:role="line"
|
||||
id="tspan190">IntTCEnable=</tspan><tspan
|
||||
x="0"
|
||||
y="12.308602"
|
||||
id="tspan192">1</tspan></text></g><path
|
||||
d="M 4481.24,2.5 H 2.5 v 3951.61 h 4478.74 z"
|
||||
style="fill:none;stroke:#231f20;stroke-width:5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="path196" /></g></g></svg>
|
||||
|
After Width: | Height: | Size: 21 KiB |
BIN
docs/source/notes/img/dma_lli2.png
Normal file
BIN
docs/source/notes/img/dma_lli2.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 16 KiB |
BIN
docs/source/notes/img/uart_sig.png
Normal file
BIN
docs/source/notes/img/uart_sig.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 50 KiB |
53
docs/source/notes/note_808dualcore.rst
Normal file
53
docs/source/notes/note_808dualcore.rst
Normal file
|
|
@ -0,0 +1,53 @@
|
|||
BL808 双核启动流程
|
||||
=======================
|
||||
|
||||
本节主要介绍 BL808 M0 和 D0 两个核的启动流程。首先我们需要知道以下信息：
|
||||
|
||||
- M0 使用 t-head E907 ,D0 使用 t-head C906，为异构双核
|
||||
- M0 和 D0 外设共享，但是中断不共享，M0 能触发的中断不一定能在 D0上触发，比如 UART0，中断只能在 M0 上使用
|
||||
- 工具烧录时，MCU 界面有 group0 和 group1 选项
|
||||
|
||||
工具烧写的秘密
|
||||
------------------
|
||||
|
||||
在工具上，烧录的时候会提示选择 group0 和 group1, 如果都不选的话，是没法烧录代码的。假如我们使用 M0 选择 group0，D0 unused，那么就是简单的
|
||||
单核启动，D0 不会启动。如果 M0 选择 group0，D0 选择 group1，则两个核都会启动。那么问题来了，为什么工具选了之后会影响双核启动呢？原因就是工具选完后的配置，会在
|
||||
烧录的时候传递给 bootrom，bootrom 会做处理。那么我们就知道了双核启动的第一步了。
|
||||
|
||||
.. figure:: img/devcube_808.png
|
||||
:alt:
|
||||
|
||||
|
||||
SystemInit 干了什么
|
||||
-------------------------
|
||||
|
||||
``SystemInit`` 函数位于 `soc/bl808/startup/m0` 和 `soc/bl808/startup/d0` 中的 `system_bl808.c` 中。
|
||||
|
||||
系统启动时，会根据 ld 文件中设置的 entry(__start) 去找 ``__start`` 函数, 这个便是我们芯片启动的入口，位于 `start.S` 中。看标题可以知道，我们主要是了解
|
||||
``SystemInit`` 函数干了什么，而 `start.S` 中做了什么是不需要关心的，只需要知道，里面会调用 ``SystemInit`` 函数。
|
||||
|
||||
- D0 ``SystemInit``
|
||||
|
||||
首先我们先看 D0 ``SystemInit``，一上来就是一个 while 死循环，系统启动时，这个条件一定是不会满足的，所以 D0 一上来就会在这死循环，等待条件成立。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
while ((BL_RD_WORD(IPC_SYNC_ADDR1) != IPC_SYNC_FLAG) ||
|
||||
(BL_RD_WORD(IPC_SYNC_ADDR2) != IPC_SYNC_FLAG)) {
|
||||
// clang-format off
|
||||
__NOP(); __NOP(); __NOP(); __NOP();
|
||||
__NOP(); __NOP(); __NOP(); __NOP();
|
||||
__NOP(); __NOP(); __NOP(); __NOP();
|
||||
__NOP(); __NOP(); __NOP(); __NOP();
|
||||
// clang-format on
|
||||
/* if cache is off, comment this and this api need to start load itcm*/
|
||||
// L1C_DCache_Invalid_By_Addr(IPC_SYNC_ADDR1, 8);
|
||||
};
|
||||
/* clear this flags for system reboot */
|
||||
BL_WR_WORD(IPC_SYNC_ADDR1, 0x0);
|
||||
BL_WR_WORD(IPC_SYNC_ADDR2, 0x0);
|
||||
|
||||
- M0 ``SystemInit``
|
||||
|
||||
根据上述信息我们知道， M0 一定会在某个时刻，向这两个寄存器写入 ``IPC_SYNC_FLAG``, 从而让 D0 运行起来。
|
||||
2
docs/source/notes/note_cache.rst
Normal file
2
docs/source/notes/note_cache.rst
Normal file
|
|
@ -0,0 +1,2 @@
|
|||
CACHE 一致性问题如何解决
|
||||
===============================
|
||||
98
docs/source/notes/note_dma.rst
Normal file
98
docs/source/notes/note_dma.rst
Normal file
|
|
@ -0,0 +1,98 @@
|
|||
DMA 链表模式（LLI）深度解析
|
||||
===============================
|
||||
|
||||
博流系列芯片的 DMA 都支持链表模式（LLI）。
|
||||
|
||||
在进行一次 DMA 读或者写的时候，可以配置多个链表，从而当一个链表的数据传输完成时，会跳到下一个链表的起始地址，并继续传输数据，直到链表的下一个地址为 0。如果 DMA 使能了完成中断，则当 DMA 发送或者接收完成时，会进入完成中断。
|
||||
|
||||
.. figure:: img/dma_lli.svg
|
||||
:alt:
|
||||
|
||||
那么有了这种 DMA 链表模式，我们就可以实现以下功能：
|
||||
|
||||
- DMA 发送或者接收长度不限制
|
||||
- DMA 发送接收地址可以不连续
|
||||
- DMA 实现多种中断模式，半中断、3中断、4中断等等
|
||||
- DMA 实现循环功能
|
||||
|
||||
OK，那么当我们开始研究链表配置之前，我们需要了解一些前提：
|
||||
- 每个链表最多传输 4095 ,单位根据位宽决定
|
||||
- 每个链表都可以触发中断
|
||||
|
||||
|
||||
支持长度不限制
|
||||
--------------------
|
||||
|
||||
由于每个 dma 链表最多支持 4905，假设位宽用的是字节，那么一个链表最多传输 4095 字节，很显然这个不能满足我们需求，性能太低。那么如何提高传输长度呢？
|
||||
|
||||
我们可以使用多个链表，串接起来，这样就能够支持更大的传输长度了，并且传输的地址是连续的，dma 链表连接如图所示：
|
||||
|
||||
.. figure:: img/dma_lli.png
|
||||
:alt:
|
||||
|
||||
|
||||
这个时候还有一个问题，当一个链表使用了 4095 字节，下一个链表是从 4095 的偏移开始，这个时候，就会产生非对齐的问题，如果是在 cache 场景下，是会有问题的。
|
||||
因此，我们将 4095 减少到 4064，这样保证每个链表的首地址都是 32 字节对齐的。到这就实现了长度不限制的功能，具体实现参考 ``bflb_dma_lli_config`` 函数。
|
||||
|
||||
.. code-block:: c
|
||||
:linenos:
|
||||
|
||||
void bflb_dma_lli_config(struct bflb_device_s *dev, struct bflb_dma_channel_lli_pool_s *lli_pool, uint32_t lli_count, uint32_t src_addr, uint32_t dst_addr, uint32_t transfer_offset, uint32_t last_transfer_len)
|
||||
{
|
||||
uint32_t channel_base;
|
||||
union bflb_dma_lli_control_s dma_ctrl_cfg;
|
||||
|
||||
channel_base = dev->reg_base;
|
||||
|
||||
dma_ctrl_cfg = (union bflb_dma_lli_control_s)getreg32(channel_base + DMA_CxCONTROL_OFFSET);
|
||||
|
||||
dma_ctrl_cfg.bits.TransferSize = 4064;
|
||||
dma_ctrl_cfg.bits.I = 0;
|
||||
|
||||
/* nbytes will be integer multiple of 4064*n or 4064*2*n or 4064*4*n,(n>0) */
|
||||
for (uint32_t i = 0; i < lli_count; i++) {
|
||||
lli_pool[i].src_addr = src_addr;
|
||||
lli_pool[i].dst_addr = dst_addr;
|
||||
lli_pool[i].nextlli = 0;
|
||||
|
||||
if (dma_ctrl_cfg.bits.SI) {
|
||||
src_addr += transfer_offset;
|
||||
}
|
||||
|
||||
if (dma_ctrl_cfg.bits.DI) {
|
||||
dst_addr += transfer_offset;
|
||||
}
|
||||
|
||||
if (i == lli_count - 1) {
|
||||
dma_ctrl_cfg.bits.TransferSize = last_transfer_len;
|
||||
dma_ctrl_cfg.bits.I = 1;
|
||||
}
|
||||
|
||||
if (i) {
|
||||
lli_pool[i - 1].nextlli = (uint32_t)(uintptr_t)&lli_pool[i];
|
||||
}
|
||||
|
||||
lli_pool[i].control = dma_ctrl_cfg;
|
||||
}
|
||||
}
|
||||
|
||||
支持地址不连续
|
||||
--------------------
|
||||
|
||||
刚刚我们解决了长度限制问题，那么本身 dma 链表是支持地址不连续的，我们只需要把上面使用的多个链表当成一个大链表，然后两个大链表拼接，并且两个链表传输的首地址不连续，就可以实现地址不连续了。
|
||||
具体实现参考 ``bflb_dma_channel_lli_reload`` 函数中的 ``bflb_dma_channel_lli_transfer_s``。dma 链表连接如图所示：
|
||||
|
||||
.. figure:: img/dma_lli2.png
|
||||
:alt:
|
||||
|
||||
|
||||
支持多中断
|
||||
--------------------
|
||||
|
||||
完成了上述两步以后，多中断也就完成了。
|
||||
当我们支持完长度不限制后，最后一个链表会开启中断，当传输完成最后一个链表时，就会触发中断。
|
||||
当我们支持完地址不连续后，多个大链表（也就是长度不限制的链表的最后一个链表）完成都会触发中断，假设设定了三个传输 ``bflb_dma_channel_lli_transfer_s``, 那么会触发三次 DMA 完成中断。
|
||||
|
||||
|
||||
支持循环模式
|
||||
--------------------
|
||||
37
docs/source/notes/note_uart.rst
Normal file
37
docs/source/notes/note_uart.rst
Normal file
|
|
@ -0,0 +1,37 @@
|
|||
UART 引脚映射详解
|
||||
===============================
|
||||
|
||||
博流系列芯片每个 pin 都可以配置成 UART 任意一个功能，这种灵活的配置就会出现一些坑，比如多个 pin 配成了一个 uart 功能。
|
||||
下面介绍下如何正确的理解 `每个 pin 都可以配置成 UART 任意一个功能` 并防止踩坑。最后讲下 ``bflb_gpio_uart_init`` 函数的实现。
|
||||
|
||||
|
||||
UART SIG
|
||||
-------------------
|
||||
|
||||
在博流系列芯片中，有个 `UART SIG` 的概念, 每个 SIG 对应到 UART 所有功能，功能类似于 8选1 选择器或者 12 选1 选择器。并且每个 SIG 都有一个默认的 UART 功能，如图所示：
|
||||
|
||||
.. figure:: img/uart_sig.png
|
||||
:alt:
|
||||
|
||||
|
||||
2 个 pin 选了一个 SIG
|
||||
^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
每个 GPIO 对应一个 SIG, 对应关系跟芯片相关，比如 BL602/BL702 是 mod 8 的关系，而 BL616/BL808 是 mod 12 的关系，这个时候就会产生一个问题， **存在重复的可能性**，
|
||||
**假设现在是 mod 8 的关系，则 GPIO0 跟 GPIO8 都对应 SIG0，如果 GPIO0 配置了 UART 一个功能，则不能再使用 GPIO8，否则会出现两个 GPIO 共用一个功能的情况**。
|
||||
|
||||
|
||||
2 个 SIG 选了一个 UART 功能
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
为了方便软件，代码中将默认功能全部改成了 `0xF`，所有 SIG 都指向一个没有作用的功能。为什么这么做？
|
||||
|
||||
假设 GPIO2 默认使用 UART0 TX，这个时候我想使用 GPIO6 作为 UART0 TX，当我软件中配置 GPIO6 为 UART0 TX 以后，请问，GPIO2 是什么功能？没错，还是 UART0 TX，这个时候就是有问题的。
|
||||
|
||||
bflb_gpio_uart_init
|
||||
------------------------
|
||||
|
||||
针对以上两个问题，出现了 ``bflb_gpio_uart_init``。该函数的作用是避免了 `2 个 SIG 选了一个 UART 功能` ，如果出现了，则后配置的覆盖前面的。
|
||||
而对于 `2 个 pin 选了一个 SIG` 则是无法靠软件避免的，只能人为的避免。
|
||||
|
||||
|
||||
72
docs/source/samples/components/freertos.rst
Normal file
72
docs/source/samples/components/freertos.rst
Normal file
|
|
@ -0,0 +1,72 @@
|
|||
FreeRTOS
|
||||
====================
|
||||
|
||||
本 demo 主要演示 FreeRTOS 基本功能：任务创建和任务切换、信号量、内存管理。更详细的代码请参考 **examples/freertos**。
|
||||
|
||||
内存管理
|
||||
---------------
|
||||
|
||||
FreeRTOS 内存管理默认使用 heap5, 可以管理多块内存，并调用 ``vPortDefineHeapRegions`` 进行初始化。
|
||||
|
||||
中断管理
|
||||
---------------
|
||||
|
||||
FreeRTOS 为 RISC-V 提供了统一的中断和异常入口，名为 ``freertos_risc_v_trap_handler``，该函数主要作用如下：
|
||||
|
||||
- 压栈
|
||||
- 根据 mcause 查找 `mtimer` 中断，并执行 ``xTaskIncrementTick``
|
||||
- 根据 mcause 查找 `ecall` 异常，并执行 ``vTaskSwitchContext``
|
||||
- 根据 mcause，如果是非 `ecall` 异常，则执行 ``exception_entry``；如果是非 `mtimer` 中断，则执行 ``portasmHANDLE_INTERRUPT``, ``portasmHANDLE_INTERRUPT`` 实际调用 ``interrupt_entry``。
|
||||
- 出栈
|
||||
|
||||
那么问题来了，是如何统一中断和异常的呢？
|
||||
|
||||
通常 RISC-V SOC 中断支持 vector 模式和 direct 模式，博流系列芯片都使用了 vector 模式，在 `startup/start.S` 文件中可以看到
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
/* mtvec: for all exceptions and non-vector mode IRQs */
|
||||
la a0, default_trap_handler
|
||||
ori a0, a0, 3
|
||||
csrw mtvec, a0
|
||||
|
||||
/* mtvt: for all vector mode IRQs */
|
||||
la a0, __Vectors
|
||||
csrw mtvt, a0
|
||||
|
||||
在 `startup/interrupt` 中可以找到 ``__Vectors``:
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
const pFunc __Vectors[] __attribute__((section(".init"), aligned(64))) = {
|
||||
default_interrupt_handler, /* */
|
||||
default_interrupt_handler, /* */
|
||||
default_interrupt_handler, /* */
|
||||
....
|
||||
};
|
||||
|
||||
此时还没有跟 ``freertos_risc_v_trap_handler`` 扯上关系，在 `freertos/CMakelist.txt` 中配置了 ``freertos_risc_v_trap_handler`` 和 ``default_interrupt_handler`` 之间的关系。那么当中断触发时，
|
||||
调用 ``default_interrupt_handler`` 其实就是调用 ``freertos_risc_v_trap_handler`` 了。
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
sdk_add_compile_definitions(-DportasmHANDLE_INTERRUPT=interrupt_entry -Ddefault_interrupt_handler=freertos_risc_v_trap_handler)
|
||||
|
||||
在 `portASM.S` 文件中 ``xPortStartFirstTask`` 函数又重新配置了 ``mtvec`` 为 ``freertos_risc_v_trap_handler``,这个时候，中断和异常就统一使用 ``freertos_risc_v_trap_handler`` 函数了。
|
||||
|
||||
编译和烧录
|
||||
-----------------------------
|
||||
|
||||
- **命令行编译**
|
||||
|
||||
参考 :ref:`linux_cmd` 或者 :ref:`windows_cmd`
|
||||
|
||||
- **烧录**
|
||||
|
||||
参考 :ref:`bl_dev_cube`
|
||||
|
||||
实验现象
|
||||
-----------------------------
|
||||
10
docs/source/samples/components/index.rst
Normal file
10
docs/source/samples/components/index.rst
Normal file
|
|
@ -0,0 +1,10 @@
|
|||
=======================
|
||||
Components
|
||||
=======================
|
||||
|
||||
组件例程如果没有特殊说明，则表示适用于博流所有系列芯片。
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
FreeRTOS <freertos>
|
||||
|
|
@ -1,121 +0,0 @@
|
|||
ADC - 电压检测
|
||||
====================
|
||||
|
||||
本 demo 主要介绍基于 ADC 的电压检测功能，使用 ADC 检测 CH8 输入的电压值。
|
||||
|
||||
硬件连接
|
||||
-----------------------------
|
||||
|
||||
将 ADC CH8 对应的 GPIO 口与 3.3 V 引脚相连。不同芯片 ADC CH8 对应的 GPIO 口如下表所示：
|
||||
|
||||
.. table:: GPIO 口
|
||||
:widths: 30, 30, 40
|
||||
:width: 80%
|
||||
:align: center
|
||||
|
||||
+----------+-----------+---------------------------+
|
||||
| 名称 | 芯片型号 | GPIO |
|
||||
+==========+===========+===========================+
|
||||
| ADC CH8 | BL702 | GPIO 18 |
|
||||
+ +-----------+---------------------------+
|
||||
| | BL616 | GPIO 1 |
|
||||
+----------+-----------+---------------------------+
|
||||
|
||||
软件实现
|
||||
-----------------------------
|
||||
|
||||
更详细的代码请参考 ``examples/peripherals/adc/adc_oneshot_1ch``
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
board_init();
|
||||
|
||||
- ``board_init`` 中会开启 adc 外设，并且初始化 adc 的时钟
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
board_adc_gpio_init();
|
||||
|
||||
- 配置相关引脚为 `ADC` 功能
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
adc = bflb_device_get_by_name("adc");
|
||||
|
||||
struct bflb_adc_config_s cfg;
|
||||
|
||||
cfg.clk_div = ADC_CLK_DIV_32;
|
||||
cfg.scan_conv_mode = false;
|
||||
cfg.continuous_conv_mode = false;
|
||||
cfg.differential_mode = false;
|
||||
cfg.resolution = ADC_RESOLUTION_16B;
|
||||
cfg.vref = ADC_VREF_3P2V;
|
||||
|
||||
bflb_adc_init(adc, &cfg);
|
||||
|
||||
- 获取 `adc` 句柄，并初始化 adc
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
struct bflb_adc_channel_s chan;
|
||||
|
||||
chan.pos_chan = ADC_CHANNEL_8;
|
||||
chan.neg_chan = ADC_CHANNEL_GND;
|
||||
|
||||
bflb_adc_channel_config(adc, &chan, 1);
|
||||
|
||||
- 配置 adc 通道信息，当前使用了一对通道
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
for (uint32_t i = 0; i < 10; i++) {
|
||||
bflb_adc_start_conversion(adc);
|
||||
|
||||
while (bflb_adc_get_count(adc) == 0) {
|
||||
}
|
||||
struct bflb_adc_result_s result;
|
||||
uint32_t raw_data = bflb_adc_read_raw(adc);
|
||||
printf("raw data:%08x\r\n", raw_data);
|
||||
bflb_adc_parse_result(adc, &raw_data, &result, 1);
|
||||
printf("pos chan %d,%d mv \r\n", result.pos_chan, result.millivolt);
|
||||
bflb_adc_stop_conversion(adc);
|
||||
bflb_mtimer_delay_ms(100);
|
||||
}
|
||||
|
||||
- 调用 ``bflb_adc_start_conversion(adc)`` 启用 adc 的转换
|
||||
- 调用 ``bflb_adc_read_raw(adc)`` 读取一次 adc 的转换值
|
||||
- 调用 ``bflb_adc_parse_result(adc, &raw_data, &result, 1)`` 对 adc 的转换结果进行解析，解析的值保存到 ``result`` 结构体中
|
||||
- 调用 ``bflb_adc_stop_conversion(adc)`` 停止 adc 转换
|
||||
|
||||
编译和烧录
|
||||
-----------------------------
|
||||
|
||||
- **命令行编译**
|
||||
|
||||
.. code-block:: bash
|
||||
:linenos:
|
||||
|
||||
$ cd <sdk_path>/examples/peripherals/adc/adc_oneshot_1ch
|
||||
$ make CHIP=blxxx BOARD=blxxx_dk
|
||||
|
||||
.. note:: blxxx为所使用的芯片型号，以bl616为例，编译命令为：make CHIP=bl616 BOARD=bl616_dk
|
||||
|
||||
- **烧录**
|
||||
|
||||
详见 :ref:`bl_dev_cube`
|
||||
|
||||
实验现象
|
||||
-----------------------------
|
||||
|
||||
将 ADC_CH8 对应的 GPIO口与 3.3V 相连，打印的信息如下：
|
||||
|
||||
.. figure:: img/adc_log.png
|
||||
:align: center
|
||||
|
||||
log 信息
|
||||
|
||||
95
docs/source/samples/peripherals/adc/adc_poll.rst
Normal file
95
docs/source/samples/peripherals/adc/adc_poll.rst
Normal file
|
|
@ -0,0 +1,95 @@
|
|||
ADC - poll
|
||||
====================
|
||||
|
||||
本 demo 主要演示 adc poll 单端模式下读取电压值。默认扫描通道 0 ~ 通道10。 **需要注意，有些芯片不一定支持全部通道**。
|
||||
|
||||
硬件连接
|
||||
-----------------------------
|
||||
|
||||
本 demo 使用到的 gpio 参考 ``board_adc_gpio_init`` 。
|
||||
|
||||
软件实现
|
||||
-----------------------------
|
||||
|
||||
更详细的代码请参考 **examples/peripherals/adc/adc_poll**
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
board_init();
|
||||
|
||||
- ``board_init`` 中会开启 ADC IP 时钟，并选择 ADC 时钟源和分频。
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
board_adc_gpio_init();
|
||||
|
||||
- 配置相关引脚为 `ADC` 功能
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
adc = bflb_device_get_by_name("adc");
|
||||
|
||||
/* adc clock = XCLK / 2 / 32 */
|
||||
struct bflb_adc_config_s cfg;
|
||||
cfg.clk_div = ADC_CLK_DIV_32;
|
||||
cfg.scan_conv_mode = true;
|
||||
cfg.continuous_conv_mode = false;
|
||||
cfg.differential_mode = false;
|
||||
cfg.resolution = ADC_RESOLUTION_16B;
|
||||
cfg.vref = ADC_VREF_3P2V;
|
||||
|
||||
bflb_adc_init(adc, &cfg);
|
||||
|
||||
- 获取 `adc` 句柄，并初始化 adc 配置，设置 adc 采样频率为 500K
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
bflb_adc_channel_config(adc, chan, TEST_ADC_CHANNELS);
|
||||
|
||||
- 配置 adc 通道信息，使用的对数根据 `TEST_ADC_CHANNELS` 可配，默认开启通道 0 ~ 10，根据 ``board_adc_gpio_init`` 需要选择性关闭其他通道。
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
for (uint32_t i = 0; i < TEST_COUNT; i++) {
|
||||
bflb_adc_start_conversion(adc);
|
||||
|
||||
while (bflb_adc_get_count(adc) < TEST_ADC_CHANNELS) {
|
||||
bflb_mtimer_delay_ms(1);
|
||||
}
|
||||
|
||||
for (size_t j = 0; j < TEST_ADC_CHANNELS; j++) {
|
||||
struct bflb_adc_result_s result;
|
||||
uint32_t raw_data = bflb_adc_read_raw(adc);
|
||||
printf("raw data:%08x\r\n", raw_data);
|
||||
bflb_adc_parse_result(adc, &raw_data, &result, 1);
|
||||
printf("pos chan %d,%d mv \r\n", result.pos_chan, result.millivolt);
|
||||
}
|
||||
|
||||
bflb_adc_stop_conversion(adc);
|
||||
bflb_mtimer_delay_ms(100);
|
||||
}
|
||||
|
||||
- 调用 ``bflb_adc_start_conversion(adc)`` 启用 adc 的转换
|
||||
- 调用 ``bflb_adc_get_count(adc)`` 读取转换完成的个数
|
||||
- 调用 ``bflb_adc_read_raw(adc)`` 读取一次 adc 的转换值
|
||||
- 调用 ``bflb_adc_parse_result(adc, &raw_data, &result, 1)`` 对 adc 的转换结果进行解析，解析的值保存到 ``result`` 结构体中
|
||||
- 调用 ``bflb_adc_stop_conversion(adc)`` 停止 adc 转换
|
||||
|
||||
编译和烧录
|
||||
-----------------------------
|
||||
|
||||
- **命令行编译**
|
||||
|
||||
参考 :ref:`linux_cmd` 或者 :ref:`windows_cmd`
|
||||
|
||||
- **烧录**
|
||||
|
||||
参考 :ref:`bl_dev_cube`
|
||||
|
||||
实验现象
|
||||
-----------------------------
|
||||
|
|
@ -1,8 +1,8 @@
|
|||
=======================
|
||||
ADC 示例
|
||||
=======================
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
ADC - 电压检测 <adc_oneshot_1ch>
|
||||
=====
|
||||
ADC
|
||||
=====
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
ADC - poll <adc_poll>
|
||||
|
|
@ -1,89 +1,83 @@
|
|||
DAC - 正弦波
|
||||
====================
|
||||
|
||||
本 demo 主要介绍基于 DAC 生成正弦波。
|
||||
|
||||
硬件连接
|
||||
-----------------------------
|
||||
|
||||
不同芯片 DAC Channel A 对应的 GPIO 口如下表所示：
|
||||
|
||||
.. table:: GPIO 口
|
||||
:widths: 30, 30, 40
|
||||
:width: 80%
|
||||
:align: center
|
||||
|
||||
+----------------+-----------+---------------------------+
|
||||
| 名称 | 芯片型号 | GPIO |
|
||||
+================+===========+===========================+
|
||||
| DAC Channel A | BL702 | GPIO 11 |
|
||||
+ +-----------+---------------------------+
|
||||
| | BL616 | GPIO 3 |
|
||||
+----------------+-----------+---------------------------+
|
||||
|
||||
软件实现
|
||||
-----------------------------
|
||||
|
||||
更详细的代码请参考 ``examples/peripherals/dac/dac_polling``
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
board_init();
|
||||
|
||||
- ``board_init`` 中会开启 dac 外设
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
board_dac_gpio_init();
|
||||
|
||||
- 配置相关引脚为 `DAC` 功能
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
dac = bflb_device_get_by_name("dac");
|
||||
|
||||
bflb_dac_init(dac, DAC_SAMPLING_FREQ_32K);
|
||||
|
||||
- 获取 `dac` 句柄，并初始化 dac，时钟配置为 32K
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
bflb_dac_channel_enable(dac, DAC_CHANNEL_A);
|
||||
|
||||
- 配置 dac 通道信息，当前使用的 A 通道
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
for (uint16_t i = 0; i < sizeof(SIN_LIST) / sizeof(uint16_t); i++) {
|
||||
bflb_dac_set_value(dac, DAC_CHANNEL_A, SIN_LIST[i]);
|
||||
bflb_mtimer_delay_us(100);
|
||||
}
|
||||
|
||||
- 调用 ``bflb_dac_set_value(dac, DAC_CHANNEL_A, SIN_LIST[i])`` ，将需要转换的数据通过通道 A 输出
|
||||
|
||||
编译和烧录
|
||||
-----------------------------
|
||||
|
||||
- **命令行编译**
|
||||
|
||||
.. code-block:: bash
|
||||
:linenos:
|
||||
|
||||
$ cd <sdk_path>/examples/peripherals/dac/dac_polling
|
||||
$ make CHIP=blxxx BOARD=blxxx_dk
|
||||
|
||||
.. note:: blxxx为所使用的芯片型号，以bl616为例，编译命令为：make CHIP=bl616 BOARD=bl616_dk
|
||||
|
||||
- **烧录**
|
||||
|
||||
详见 :ref:`bl_dev_cube`
|
||||
|
||||
实验现象
|
||||
-----------------------------
|
||||
|
||||
DAC Channel A 对应的 GPIO 输出正弦波。
|
||||
DAC - poll
|
||||
====================
|
||||
|
||||
本 demo 主要介绍基于 DAC 轮询模式生成正弦波。
|
||||
|
||||
硬件连接
|
||||
-----------------------------
|
||||
|
||||
本 demo 使用到的 gpio 如下表：
|
||||
|
||||
.. table:: GPIO 口
|
||||
:widths: 30, 30, 40
|
||||
:width: 80%
|
||||
:align: center
|
||||
|
||||
+----------------+-----------+---------------------------+
|
||||
| 名称 | 芯片型号 | GPIO |
|
||||
+================+===========+===========================+
|
||||
| DAC Channel A | BL702 | GPIO 11 |
|
||||
+ +-----------+---------------------------+
|
||||
| | BL616 | GPIO 3 |
|
||||
+----------------+-----------+---------------------------+
|
||||
|
||||
软件实现
|
||||
-----------------------------
|
||||
|
||||
更详细的代码请参考 **examples/peripherals/dac/dac_polling**
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
board_init();
|
||||
|
||||
- ``board_init`` 中会开启 DAC IP 时钟，并选择 DAC 时钟源和分频。
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
board_dac_gpio_init();
|
||||
|
||||
- 配置相关引脚为 `DAC` 功能
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
dac = bflb_device_get_by_name("dac");
|
||||
|
||||
bflb_dac_init(dac, DAC_SAMPLING_FREQ_32K);
|
||||
|
||||
- 获取 `dac` 句柄，并初始化 dac 频率为 32K
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
bflb_dac_channel_enable(dac, DAC_CHANNEL_A);
|
||||
|
||||
- 配置 dac 通道信息，当前使用的 A 通道
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
for (uint16_t i = 0; i < sizeof(SIN_LIST) / sizeof(uint16_t); i++) {
|
||||
bflb_dac_set_value(dac, DAC_CHANNEL_A, SIN_LIST[i]);
|
||||
bflb_mtimer_delay_us(100);
|
||||
}
|
||||
|
||||
- 调用 ``bflb_dac_set_value(dac, DAC_CHANNEL_A, SIN_LIST[i])`` ，将需要转换的数据通过通道 A 输出
|
||||
|
||||
编译和烧录
|
||||
-----------------------------
|
||||
|
||||
- **命令行编译**
|
||||
|
||||
参考 :ref:`linux_cmd` 或者 :ref:`windows_cmd`
|
||||
|
||||
- **烧录**
|
||||
|
||||
参考 :ref:`bl_dev_cube`
|
||||
|
||||
实验现象
|
||||
-----------------------------
|
||||
|
||||
DAC Channel A 对应的 GPIO 输出正弦波。
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
=======================
|
||||
DAC 示例
|
||||
=======================
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
DAC - 生成正弦波 <dac_polling>
|
||||
====
|
||||
DAC
|
||||
====
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
DAC - poll <dac_polling>
|
||||
|
|
@ -8,5 +8,5 @@ Peripherals
|
|||
:maxdepth: 1
|
||||
|
||||
ADC <adc/index>
|
||||
DAC <dac/index>
|
||||
UART <uart/index>
|
||||
DAC <dac/index>
|
||||
|
|
@ -1,8 +1,9 @@
|
|||
=======================
|
||||
UART 轮询收发数据
|
||||
=======================
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
UART - poll <uart_poll>
|
||||
======
|
||||
UART
|
||||
======
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
UART - poll <uart_poll>
|
||||
UART - dma <uart_dma>
|
||||
160
docs/source/samples/peripherals/uart/uart_dma.rst
Normal file
160
docs/source/samples/peripherals/uart/uart_dma.rst
Normal file
|
|
@ -0,0 +1,160 @@
|
|||
UART - dma
|
||||
====================
|
||||
|
||||
本 demo 主要演示 UART dma 模式收发功能。
|
||||
|
||||
硬件连接
|
||||
-----------------------------
|
||||
|
||||
- 芯片 UART TX 引脚连接 USB2TTL 模块 RX
|
||||
- 芯片 UART RX 引脚连接 USB2TTL 模块 TX
|
||||
|
||||
本 demo 使用到的 gpio 如下表：
|
||||
|
||||
.. table:: GPIO 口
|
||||
:widths: 30, 30, 40
|
||||
:width: 80%
|
||||
:align: center
|
||||
|
||||
+----------+-----------+---------------------------+
|
||||
| 名称 | 芯片型号 | GPIO |
|
||||
+==========+===========+===========================+
|
||||
| UART1_TX | BL702 | GPIO 18 |
|
||||
+ +-----------+---------------------------+
|
||||
| | BL616 | GPIO 23 |
|
||||
+----------+-----------+---------------------------+
|
||||
| UART1_RX | BL702 | GPIO 19 |
|
||||
+ +-----------+---------------------------+
|
||||
| | BL616 | GPIO 24 |
|
||||
+----------+-----------+---------------------------+
|
||||
|
||||
软件实现
|
||||
-----------------------------
|
||||
|
||||
具体软件代码见 **examples/peripherals/uart/uart_podma**
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
board_init();
|
||||
|
||||
- ``board_init`` 中会开启 UART IP 时钟，并选择 UART 时钟源和分频。
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
board_uartx_gpio_init();
|
||||
|
||||
- 配置相关引脚为 ``UARTx TX`` 、 ``UARTx RX`` 功能，默认 demo 使用 UART1 外设。
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
uartx = bflb_device_get_by_name(DEFAULT_TEST_UART);
|
||||
|
||||
struct bflb_uart_config_s cfg;
|
||||
|
||||
cfg.baudrate = 2000000;
|
||||
cfg.data_bits = UART_DATA_BITS_8;
|
||||
cfg.stop_bits = UART_STOP_BITS_1;
|
||||
cfg.parity = UART_PARITY_NONE;
|
||||
cfg.flow_ctrl = 0;
|
||||
cfg.tx_fifo_threshold = 7;
|
||||
cfg.rx_fifo_threshold = 7;
|
||||
bflb_uart_init(uartx, &cfg);
|
||||
|
||||
- 获取 `DEFAULT_TEST_UART` 句柄，并初始化 UART
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
bflb_uart_link_txdma(uartx, true);
|
||||
bflb_uart_link_rxdma(uartx, true);
|
||||
|
||||
- 使能 uart tx、rx dma 功能
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
struct bflb_dma_channel_config_s config;
|
||||
|
||||
config.direction = DMA_MEMORY_TO_PERIPH;
|
||||
config.src_req = DMA_REQUEST_NONE;
|
||||
config.dst_req = DEFAULT_TEST_UART_DMA_TX_REQUEST;
|
||||
config.src_addr_inc = DMA_ADDR_INCREMENT_ENABLE;
|
||||
config.dst_addr_inc = DMA_ADDR_INCREMENT_DISABLE;
|
||||
config.src_burst_count = DMA_BURST_INCR1;
|
||||
config.dst_burst_count = DMA_BURST_INCR1;
|
||||
config.src_width = DMA_DATA_WIDTH_8BIT;
|
||||
config.dst_width = DMA_DATA_WIDTH_8BIT;
|
||||
bflb_dma_channel_init(dma0_ch0, &config);
|
||||
|
||||
struct bflb_dma_channel_config_s rxconfig;
|
||||
|
||||
rxconfig.direction = DMA_PERIPH_TO_MEMORY;
|
||||
rxconfig.src_req = DEFAULT_TEST_UART_DMA_RX_REQUEST;
|
||||
rxconfig.dst_req = DMA_REQUEST_NONE;
|
||||
rxconfig.src_addr_inc = DMA_ADDR_INCREMENT_DISABLE;
|
||||
rxconfig.dst_addr_inc = DMA_ADDR_INCREMENT_ENABLE;
|
||||
rxconfig.src_burst_count = DMA_BURST_INCR1;
|
||||
rxconfig.dst_burst_count = DMA_BURST_INCR1;
|
||||
rxconfig.src_width = DMA_DATA_WIDTH_8BIT;
|
||||
rxconfig.dst_width = DMA_DATA_WIDTH_8BIT;
|
||||
bflb_dma_channel_init(dma0_ch1, &rxconfig);
|
||||
|
||||
bflb_dma_channel_irq_attach(dma0_ch0, dma0_ch0_isr, NULL);
|
||||
bflb_dma_channel_irq_attach(dma0_ch1, dma0_ch1_isr, NULL);
|
||||
|
||||
- 配置 `DMA CH0` 为 `UARTx TX` ， `DMA CH1` 为 `UARTx RX` .
|
||||
- 注册 dma 通道中断
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
struct bflb_dma_channel_lli_pool_s tx_llipool[20]; /* max trasnfer size 4064 * 20 */
|
||||
struct bflb_dma_channel_lli_transfer_s tx_transfers[3];
|
||||
|
||||
tx_transfers[0].src_addr = (uint32_t)src_buffer;
|
||||
tx_transfers[0].dst_addr = (uint32_t)DEFAULT_TEST_UART_DMA_TDR;
|
||||
tx_transfers[0].nbytes = 4100;
|
||||
|
||||
tx_transfers[1].src_addr = (uint32_t)src2_buffer;
|
||||
tx_transfers[1].dst_addr = (uint32_t)DEFAULT_TEST_UART_DMA_TDR;
|
||||
tx_transfers[1].nbytes = 4100;
|
||||
|
||||
tx_transfers[2].src_addr = (uint32_t)src3_buffer;
|
||||
tx_transfers[2].dst_addr = (uint32_t)DEFAULT_TEST_UART_DMA_TDR;
|
||||
tx_transfers[2].nbytes = 4100;
|
||||
|
||||
struct bflb_dma_channel_lli_pool_s rx_llipool[20];
|
||||
struct bflb_dma_channel_lli_transfer_s rx_transfers[1];
|
||||
rx_transfers[0].src_addr = (uint32_t)DEFAULT_TEST_UART_DMA_RDR;
|
||||
rx_transfers[0].dst_addr = (uint32_t)receive_buffer;
|
||||
rx_transfers[0].nbytes = 50;
|
||||
|
||||
bflb_dma_channel_lli_reload(dma0_ch0, tx_llipool, 20, tx_transfers, 3);
|
||||
bflb_dma_channel_lli_reload(dma0_ch1, rx_llipool, 20, rx_transfers, 1);
|
||||
bflb_dma_channel_start(dma0_ch0);
|
||||
bflb_dma_channel_start(dma0_ch1);
|
||||
|
||||
- 分配一块 lli 内存池，个数为20，最多可以传输 4094 * 20 字节
|
||||
- 配置三块不连续的内存进行传输
|
||||
- 调用 ``bflb_dma_channel_lli_reload`` 初始化
|
||||
- 调用 ``bflb_dma_channel_start`` 启动传输
|
||||
- 等待传输完成并进入中断
|
||||
|
||||
编译和烧录
|
||||
-----------------------------
|
||||
|
||||
- **命令行编译**
|
||||
|
||||
参考 :ref:`linux_cmd` 或者 :ref:`windows_cmd`
|
||||
|
||||
- **烧录**
|
||||
|
||||
参考 :ref:`bl_dev_cube`
|
||||
|
||||
实验现象
|
||||
-----------------------------
|
||||
|
||||
|
||||
|
|
@ -1,102 +1,99 @@
|
|||
UART - 轮询收发数据
|
||||
====================
|
||||
|
||||
本 demo 主要介绍 UART1 外设的轮询发送和轮询接收，实现自发自收功能。
|
||||
|
||||
硬件连接
|
||||
-----------------------------
|
||||
|
||||
将 UART1 TX 和 RX 引脚分别与 USB2TTL 模块 RX 和 TX 相连。本 demo 中不同芯片 UART1 引脚对应的 GPIO 口如下表所示：
|
||||
|
||||
.. table:: GPIO 口
|
||||
:widths: 30, 30, 40
|
||||
:width: 80%
|
||||
:align: center
|
||||
|
||||
+----------+-----------+---------------------------+
|
||||
| 名称 | 芯片型号 | GPIO |
|
||||
+==========+===========+===========================+
|
||||
| UART1_TX | BL702 | GPIO 18 |
|
||||
+ +-----------+---------------------------+
|
||||
| | BL616 | GPIO 23 |
|
||||
+----------+-----------+---------------------------+
|
||||
| UART1_RX | BL702 | GPIO 19 |
|
||||
+ +-----------+---------------------------+
|
||||
| | BL616 | GPIO 24 |
|
||||
+----------+-----------+---------------------------+
|
||||
|
||||
软件实现
|
||||
-----------------------------
|
||||
|
||||
具体软件代码见 ``examples/peripherals/uart/uart_poll``
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
board_init();
|
||||
|
||||
- ``board_init`` 中会开启 uart1 外设，并且初始化 uart1 的时钟
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
board_uart1_gpio_init();
|
||||
|
||||
- 配置相关引脚为 ``UART1 TX`` 、 ``UART1 RX`` 功能
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
uart1 = bflb_device_get_by_name("uart1");
|
||||
|
||||
struct bflb_uart_config_s cfg;
|
||||
|
||||
cfg.baudrate = 2000000;
|
||||
cfg.data_bits = UART_DATA_BITS_8;
|
||||
cfg.stop_bits = UART_STOP_BITS_1;
|
||||
cfg.parity = UART_PARITY_NONE;
|
||||
cfg.flow_ctrl = 0;
|
||||
cfg.tx_fifo_threshold = 7;
|
||||
cfg.rx_fifo_threshold = 7;
|
||||
bflb_uart_init(uart1, &cfg);
|
||||
|
||||
- 获取 `uart1` 句柄，并初始化 UART1
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
int ch;
|
||||
while (1) {
|
||||
ch = bflb_uart_getchar(uart1);
|
||||
if (ch != -1) {
|
||||
bflb_uart_putchar(uart1, ch);
|
||||
}
|
||||
}
|
||||
|
||||
- 调用 ``bflb_uart_getchar(uart1)`` ，从 UART1 RX FIFO 中读取 USB2TTL 模块发送给 UART1 的数据，保存在 ch 中，如果没有数据则返回 -1
|
||||
- 调用 ``bflb_uart_putchar(uart1, ch)`` 将数据 ch 写入 UART1 TX FIFO 中，并发送给 USB2TTL 模块
|
||||
|
||||
编译和烧录
|
||||
-----------------------------
|
||||
|
||||
- **命令行编译**
|
||||
|
||||
.. code-block:: bash
|
||||
:linenos:
|
||||
|
||||
$ cd <sdk_path>/examples/peripherals/uart/uart_poll
|
||||
$ make CHIP=blxxx BOARD=blxxx_dk
|
||||
|
||||
.. note:: blxxx为所使用的芯片型号，以bl616为例，编译命令为：make CHIP=bl616 BOARD=bl616_dk
|
||||
|
||||
- **烧录**
|
||||
|
||||
详见 :ref:`bl_dev_cube`
|
||||
|
||||
实验现象
|
||||
-----------------------------
|
||||
|
||||
将 UART1 TX, RX, GND 引脚分别与 USB2TTL 模块 RX, TX, GND 相连，按下 reset 按键。
|
||||
使用串口给 UART1 发送 ``0123456789`` ，USB2TTL 模块能接收到同样的数据。
|
||||
|
||||
|
||||
UART - poll
|
||||
====================
|
||||
|
||||
本 demo 主要演示 UART 轮询模式收发功能。
|
||||
|
||||
硬件连接
|
||||
-----------------------------
|
||||
|
||||
- 芯片 UART TX 引脚连接 USB2TTL 模块 RX
|
||||
- 芯片 UART RX 引脚连接 USB2TTL 模块 TX
|
||||
|
||||
本 demo 使用到的 gpio 如下表：
|
||||
|
||||
.. table:: GPIO 口
|
||||
:widths: 30, 30, 40
|
||||
:width: 80%
|
||||
:align: center
|
||||
|
||||
+----------+-----------+---------------------------+
|
||||
| 名称 | 芯片型号 | GPIO |
|
||||
+==========+===========+===========================+
|
||||
| UART1_TX | BL702 | GPIO 18 |
|
||||
+ +-----------+---------------------------+
|
||||
| | BL616 | GPIO 23 |
|
||||
+----------+-----------+---------------------------+
|
||||
| UART1_RX | BL702 | GPIO 19 |
|
||||
+ +-----------+---------------------------+
|
||||
| | BL616 | GPIO 24 |
|
||||
+----------+-----------+---------------------------+
|
||||
|
||||
软件实现
|
||||
-----------------------------
|
||||
|
||||
具体软件代码见 **examples/peripherals/uart/uart_poll**
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
board_init();
|
||||
|
||||
- ``board_init`` 中会开启 UART IP 时钟，并选择 UART 时钟源和分频。
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
board_uartx_gpio_init();
|
||||
|
||||
- 配置相关引脚为 ``UARTx TX`` 、 ``UARTx RX`` 功能，默认 demo 使用 UART1 外设。
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
uartx = bflb_device_get_by_name(DEFAULT_TEST_UART);
|
||||
|
||||
struct bflb_uart_config_s cfg;
|
||||
|
||||
cfg.baudrate = 2000000;
|
||||
cfg.data_bits = UART_DATA_BITS_8;
|
||||
cfg.stop_bits = UART_STOP_BITS_1;
|
||||
cfg.parity = UART_PARITY_NONE;
|
||||
cfg.flow_ctrl = 0;
|
||||
cfg.tx_fifo_threshold = 7;
|
||||
cfg.rx_fifo_threshold = 7;
|
||||
bflb_uart_init(uartx, &cfg);
|
||||
|
||||
- 获取 `DEFAULT_TEST_UART` 句柄，并初始化 UART
|
||||
|
||||
.. code-block:: C
|
||||
:linenos:
|
||||
|
||||
int ch;
|
||||
while (1) {
|
||||
ch = bflb_uart_getchar(uartx);
|
||||
if (ch != -1) {
|
||||
bflb_uart_putchar(uartx, ch);
|
||||
}
|
||||
}
|
||||
|
||||
- 调用 ``bflb_uart_getchar`` 从 uart rx fifo 中读取数据，如果返回 -1，表示没有数据
|
||||
- 调用 ``bflb_uart_putchar`` 将数据 `ch` 填充到 uart tx fifo 中
|
||||
|
||||
编译和烧录
|
||||
-----------------------------
|
||||
|
||||
- **命令行编译**
|
||||
|
||||
参考 :ref:`linux_cmd` 或者 :ref:`windows_cmd`
|
||||
|
||||
- **烧录**
|
||||
|
||||
参考 :ref:`bl_dev_cube`
|
||||
|
||||
实验现象
|
||||
-----------------------------
|
||||
|
||||
将 UART1 TX, RX, GND 引脚分别与 USB2TTL 模块 RX, TX, GND 相连，按下 reset 按键。
|
||||
使用串口给 UART1 发送 ``0123456789`` ，USB2TTL 模块能接收到同样的数据。
|
||||
|
||||
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue