mirror of
https://github.com/Fishwaldo/build.git
synced 2025-03-27 09:11:49 +00:00
Remove deprecated DT file. https://github.com/armbian/build/pull/858
This commit is contained in:
Igor Pecovnik
parent
4efc4fe8df
commit
751fb4fd13
1 changed files with 0 additions and 357 deletions
|
|
@ -1,357 +0,0 @@
|
|||
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
|
||||
index eff87a3..3efb92f
|
||||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -1028,6 +1028,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
|
||||
armada-385-linksys-rango.dtb \
|
||||
armada-385-linksys-shelby.dtb \
|
||||
armada-385-synology-ds116.dtb \
|
||||
+ armada-388-helios4.dtb \
|
||||
armada-385-turris-omnia.dtb \
|
||||
armada-388-clearfog.dtb \
|
||||
armada-388-clearfog-base.dtb \
|
||||
diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts
|
||||
new file mode 100644
|
||||
index 0000000..4edb552
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/boot/dts/armada-388-helios4.dts
|
||||
@@ -0,0 +1,339 @@
|
||||
+/*
|
||||
+ * Device Tree file for Helios-4
|
||||
+ * based on SolidRun Clearfog revision A1 rev 2.0 (88F6828)
|
||||
+ *
|
||||
+ * Copyright (C) 2017
|
||||
+ *
|
||||
+ */
|
||||
+
|
||||
+/dts-v1/;
|
||||
+#include "armada-388.dtsi"
|
||||
+#include "armada-38x-solidrun-microsom.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ model = "Helios4";
|
||||
+ compatible = "marvell,armada388",
|
||||
+ "marvell,armada385", "marvell,armada380";
|
||||
+
|
||||
+ memory {
|
||||
+ device_type = "memory";
|
||||
+ reg = <0x00000000 0x40000000>; /* 1 GB */
|
||||
+ };
|
||||
+
|
||||
+ aliases {
|
||||
+ /* So that mvebu u-boot can update the MAC addresses */
|
||||
+ ethernet1 = ð0;
|
||||
+ };
|
||||
+
|
||||
+ chosen {
|
||||
+ stdout-path = "serial0:115200n8";
|
||||
+ };
|
||||
+
|
||||
+ reg_12v: regulator-12v {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "power_brick_12V";
|
||||
+ regulator-min-microvolt = <12000000>;
|
||||
+ regulator-max-microvolt = <12000000>;
|
||||
+ regulator-always-on;
|
||||
+ };
|
||||
+
|
||||
+ reg_3p3v: regulator-3p3v {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "3P3V";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-always-on;
|
||||
+ vin-supply = <®_12v>;
|
||||
+ };
|
||||
+
|
||||
+ reg_5p0v_hdd: regulator-5v-hdd {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "5V_HDD";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ regulator-always-on;
|
||||
+ vin-supply = <®_12v>;
|
||||
+ };
|
||||
+
|
||||
+ reg_5p0v_usb: regulator-5v-usb {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "USB-PWR";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-always-on;
|
||||
+ enable-active-high;
|
||||
+ gpio = <&expander0 6 GPIO_ACTIVE_HIGH>;
|
||||
+ vin-supply = <®_12v>;
|
||||
+ };
|
||||
+
|
||||
+ gpio-keys {
|
||||
+ compatible = "gpio-keys";
|
||||
+ pinctrl-0 = <&user_button_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+
|
||||
+ button_0 {
|
||||
+ label = "User Button";
|
||||
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
|
||||
+ linux,can-disable;
|
||||
+ linux,code = <BTN_0>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ system-leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+ status-led {
|
||||
+ label = "helios4:green:status";
|
||||
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "heartbeat";
|
||||
+ default-state = "on";
|
||||
+ };
|
||||
+
|
||||
+ fault-led {
|
||||
+ label = "helios4:red:fault";
|
||||
+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
|
||||
+ default-state = "keep";
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ io-leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+ sata1-led {
|
||||
+ label = "helios4:green:ata1";
|
||||
+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "ata1";
|
||||
+ default-state = "off";
|
||||
+ };
|
||||
+ sata2-led {
|
||||
+ label = "helios4:green:ata2";
|
||||
+ gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "ata2";
|
||||
+ default-state = "off";
|
||||
+ };
|
||||
+ sata3-led {
|
||||
+ label = "helios4:green:ata3";
|
||||
+ gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "ata3";
|
||||
+ default-state = "off";
|
||||
+ };
|
||||
+ sata4-led {
|
||||
+ label = "helios4:green:ata4";
|
||||
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "ata4";
|
||||
+ default-state = "off";
|
||||
+ };
|
||||
+ usb-led {
|
||||
+ label = "helios4:green:usb";
|
||||
+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "usb-host";
|
||||
+ default-state = "off";
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ fan1: j10-pwm {
|
||||
+ compatible = "pwm-fan";
|
||||
+ pwms = <&gpio1 9 3000>;
|
||||
+ };
|
||||
+
|
||||
+ fan2: j17-pwm {
|
||||
+ compatible = "pwm-fan";
|
||||
+ pwms = <&gpio1 4 4500>;
|
||||
+ };
|
||||
+
|
||||
+ usb2_phy: usb2-phy {
|
||||
+ compatible = "usb-nop-xceiv";
|
||||
+ vbus-regulator = <®_5p0v_usb>;
|
||||
+ };
|
||||
+
|
||||
+ usb3_phy: usb3-phy {
|
||||
+ compatible = "usb-nop-xceiv";
|
||||
+ //vbus-regulator = <®_5p0v_usb>;
|
||||
+ };
|
||||
+
|
||||
+ soc {
|
||||
+ internal-regs {
|
||||
+ i2c@11000 {
|
||||
+ clock-frequency = <100000>;
|
||||
+ pinctrl-0 = <&i2c0_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ status = "okay";
|
||||
+
|
||||
+ /*
|
||||
+ * PCA9655 GPIO expander, up to 1MHz clock.
|
||||
+ * 0-Board Revision bit 0 #
|
||||
+ * 1-Board Revision bit 1 #
|
||||
+ * 5-USB3 overcurrent
|
||||
+ * 6-USB3 power
|
||||
+ */
|
||||
+ expander0: gpio-expander@20 {
|
||||
+ /*
|
||||
+ * This is how it should be:
|
||||
+ * compatible = "onnn,pca9655",
|
||||
+ * "nxp,pca9555";
|
||||
+ * but you can't do this because of
|
||||
+ * the way I2C works.
|
||||
+ */
|
||||
+ compatible = "nxp,pca9555";
|
||||
+ gpio-controller;
|
||||
+ #gpio-cells = <2>;
|
||||
+ reg = <0x20>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pca0_pins>;
|
||||
+ interrupt-parent = <&gpio0>;
|
||||
+ interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
|
||||
+ interrupt-controller;
|
||||
+ #interrupt-cells = <2>;
|
||||
+
|
||||
+ board_rev_bit_0 {
|
||||
+ gpio-hog;
|
||||
+ gpios = <0 GPIO_ACTIVE_LOW>;
|
||||
+ input;
|
||||
+ line-name = "board-rev-0";
|
||||
+ };
|
||||
+ board_rev_bit_1 {
|
||||
+ gpio-hog;
|
||||
+ gpios = <1 GPIO_ACTIVE_LOW>;
|
||||
+ input;
|
||||
+ line-name = "board-rev-1";
|
||||
+ };
|
||||
+ usb3_ilimit {
|
||||
+ gpio-hog;
|
||||
+ gpios = <5 GPIO_ACTIVE_HIGH>;
|
||||
+ input;
|
||||
+ line-name = "usb-overcurrent-status";
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ temp_sensor: temp@4c {
|
||||
+ compatible = "ti,lm75";
|
||||
+ reg = <0x4c>;
|
||||
+ vcc-supply = <®_3p3v>;
|
||||
+ };
|
||||
+
|
||||
+ /* What device at 0x64 ? */
|
||||
+ };
|
||||
+
|
||||
+ i2c@11100 {
|
||||
+ /*
|
||||
+ * External I2C Bus for user peripheral
|
||||
+ */
|
||||
+ clock-frequency = <400000>;
|
||||
+ pinctrl-0 = <&helios_i2c1_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ status = "okay";
|
||||
+ };
|
||||
+
|
||||
+ sata@a8000 {
|
||||
+ status = "okay";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ sata0: sata-port@0 {
|
||||
+ reg = <0>;
|
||||
+ };
|
||||
+
|
||||
+ sata1: sata-port@1 {
|
||||
+ reg = <1>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ sata@e0000 {
|
||||
+ status = "okay";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ sata2: sata-port@0 {
|
||||
+ reg = <0>;
|
||||
+ };
|
||||
+
|
||||
+ sata3: sata-port@1 {
|
||||
+ reg = <1>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ spi@10680 {
|
||||
+ pinctrl-0 = <&spi1_pins
|
||||
+ µsom_spi1_cs_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ status = "okay";
|
||||
+
|
||||
+ spi-flash@0 {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ compatible = "w25q32", "jedec,spi-nor";
|
||||
+ reg = <0>; /* Chip select 0 */
|
||||
+ spi-max-frequency = <104000000>;
|
||||
+ spi-cpha;
|
||||
+ status = "okay";
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ sdhci@d8000 {
|
||||
+ bus-width = <4>;
|
||||
+ cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
|
||||
+ no-1-8-v;
|
||||
+ pinctrl-0 = <&helios_sdhci_pins
|
||||
+ &helios_sdhci_cd_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ status = "okay";
|
||||
+ vmmc = <®_3p3v>;
|
||||
+ wp-inverted;
|
||||
+ };
|
||||
+
|
||||
+ usb@58000 {
|
||||
+ //vcc-supply = <®_5p0v_usb>;
|
||||
+ usb-phy = <&usb2_phy>;
|
||||
+ status = "okay";
|
||||
+ };
|
||||
+
|
||||
+ usb3@f0000 {
|
||||
+ status = "okay";
|
||||
+ };
|
||||
+
|
||||
+ usb3@f8000 {
|
||||
+ status = "okay";
|
||||
+ };
|
||||
+
|
||||
+ pinctrl@18000 {
|
||||
+ pca0_pins: pca0_pins {
|
||||
+ marvell,pins = "mpp18";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+ helios_i2c1_pins: i2c1-pins {
|
||||
+ marvell,pins = "mpp26", "mpp27";
|
||||
+ marvell,function = "i2c1";
|
||||
+ };
|
||||
+ helios_sdhci_cd_pins: helios-sdhci-cd-pins {
|
||||
+ marvell,pins = "mpp20";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+ helios_sdhci_pins: helios-sdhci-pins {
|
||||
+ marvell,pins = "mpp21", "mpp28",
|
||||
+ "mpp37", "mpp38",
|
||||
+ "mpp39", "mpp40";
|
||||
+ marvell,function = "sd0";
|
||||
+ };
|
||||
+ helios_led_pins: helios-led-pins {
|
||||
+ marvell,pins = "mpp24", "mpp25",
|
||||
+ "mpp49", "mpp50",
|
||||
+ "mpp52", "mpp53",
|
||||
+ "mpp54";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+ helios_fan_pins: helios-fan-pins {
|
||||
+ marvell,pins = "mpp41", "mpp43",
|
||||
+ "mpp48", "mpp55";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+ microsom_spi1_cs_pins: spi1-cs-pins {
|
||||
+ marvell,pins = "mpp59";
|
||||
+ marvell,function = "spi1";
|
||||
+ };
|
||||
+ user_button_pins: user-button-pins {
|
||||
+ marvell,pins = "mpp23";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
Loading…
Add table
Reference in a new issue