build/patch/kernel/meson64-current/add_audio_sample_channel.patch
Igor Pečovnik ff4c1488da
Move to 5.4.y (#1686)
* Wireguard: bump tag to most recent since it breaks building on 5.4.y
* Move rockchip current to 5.4.y
* Move sunxi current to 5.4.y
* Move meson64 to 5.4.y
* Move odroidxu4 to 5.4.y and enable "current" targets
* Enable missing target
2019-12-23 00:40:23 +01:00

125 lines
5.6 KiB
Diff

From patchwork Wed Sep 11 08:26:46 2019
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v3] drm: bridge/dw_hdmi: add audio sample channel status setting
From: Cheng-Yi Chiang <cychiang@chromium.org>
X-Patchwork-Id: 330283
Message-Id: <20190911082646.134347-1-cychiang@chromium.org>
To: linux-kernel@vger.kernel.org
Cc: alsa-devel@alsa-project.org, kuninori.morimoto.gx@renesas.com,
Neil Armstrong <narmstrong@baylibre.com>, airlied@linux.ie,
dri-devel@lists.freedesktop.org, cain.cai@rock-chips.com,
Laurent.pinchart@ideasonboard.com, Yakir Yang <ykk@rock-chips.com>,
sam@ravnborg.org, Jerome Brunet <jbrunet@baylibre.com>,
zhengxing@rock-chips.com, linux-rockchip@lists.infradead.org,
dgreid@chromium.org, cychiang@chromium.org, tzungbi@chromium.org,
Jonas Karlman <jonas@kwiboo.se>, jeffy.chen@rock-chips.com,
eddie.cai@rock-chips.com, linux-arm-kernel@lists.infradead.org,
Jernej Skrabec <jernej.skrabec@siol.net>, dianders@chromium.org,
enric.balletbo@collabora.com, kuankuan.y@gmail.com
Date: Wed, 11 Sep 2019 16:26:46 +0800
From: Yakir Yang <ykk@rock-chips.com>
When transmitting IEC60985 linear PCM audio, we configure the
Aduio Sample Channel Status information in the IEC60958 frame.
The status bit is already available in iec.status of hdmi_codec_params.
This fix the issue that audio does not come out on some monitors
(e.g. LG 22CV241)
Note that these registers are only for interfaces:
I2S audio interface, General Purpose Audio (GPA), or AHB audio DMA
(AHBAUDDMA).
For S/PDIF interface this information comes from the stream.
Currently this function dw_hdmi_set_channel_status is only called
from dw-hdmi-i2s-audio in I2S setup.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
---
Change from v2 to v3:
1. Reuse what is already set in iec.status in hw_param.
2. Remove all useless definition of registers and values.
3. Note that the original sampling frequency is not written to
the channel status as we reuse create_iec958_consumer in pcm_iec958.c.
Without that it can still play audio fine.
.../drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 1 +
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 20 +++++++++++++++++++
drivers/gpu/drm/bridge/synopsys/dw-hdmi.h | 2 ++
include/drm/bridge/dw_hdmi.h | 1 +
4 files changed, 24 insertions(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
index 34d8e837555f..20f4f92dd866 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
@@ -102,6 +102,7 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
}
dw_hdmi_set_sample_rate(hdmi, hparms->sample_rate);
+ dw_hdmi_set_channel_status(hdmi, hparms->iec.status);
dw_hdmi_set_channel_count(hdmi, hparms->channels);
dw_hdmi_set_channel_allocation(hdmi, hparms->cea.channel_allocation);
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index bd65d0479683..aa7efd4da1c8 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -582,6 +582,26 @@ static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk)
return n;
}
+/*
+ * When transmitting IEC60958 linear PCM audio, these registers allow to
+ * configure the channel status information of all the channel status
+ * bits in the IEC60958 frame. For the moment this configuration is only
+ * used when the I2S audio interface, General Purpose Audio (GPA),
+ * or AHB audio DMA (AHBAUDDMA) interface is active
+ * (for S/PDIF interface this information comes from the stream).
+ */
+void dw_hdmi_set_channel_status(struct dw_hdmi *hdmi,
+ u8 *channel_status)
+{
+ /*
+ * Set channel status register for frequency and word length.
+ * Use default values for other registers.
+ */
+ hdmi_writeb(hdmi, channel_status[3], HDMI_FC_AUDSCHNLS7);
+ hdmi_writeb(hdmi, channel_status[4], HDMI_FC_AUDSCHNLS8);
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_set_channel_status);
+
static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
unsigned long pixel_clk, unsigned int sample_rate)
{
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
index 6988f12d89d9..fcff5059db24 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
@@ -158,6 +158,8 @@
#define HDMI_FC_SPDDEVICEINF 0x1062
#define HDMI_FC_AUDSCONF 0x1063
#define HDMI_FC_AUDSSTAT 0x1064
+#define HDMI_FC_AUDSCHNLS7 0x106e
+#define HDMI_FC_AUDSCHNLS8 0x106f
#define HDMI_FC_DATACH0FILL 0x1070
#define HDMI_FC_DATACH1FILL 0x1071
#define HDMI_FC_DATACH2FILL 0x1072
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index cf528c289857..4b3e863c4f8a 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -156,6 +156,7 @@ void dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense);
void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned int rate);
void dw_hdmi_set_channel_count(struct dw_hdmi *hdmi, unsigned int cnt);
+void dw_hdmi_set_channel_status(struct dw_hdmi *hdmi, u8 *channel_status);
void dw_hdmi_set_channel_allocation(struct dw_hdmi *hdmi, unsigned int ca);
void dw_hdmi_audio_enable(struct dw_hdmi *hdmi);
void dw_hdmi_audio_disable(struct dw_hdmi *hdmi);