build/patch/kernel/rockchip-next/2015-ARM-DTS-rk3288-tinker-Enabling-SDIO-Wireless-and.patch
2017-11-28 23:17:20 -05:00

165 lines
3.9 KiB
Diff

From 2715f4a9ab5c169c546029a61eebb0bde6619b0e Mon Sep 17 00:00:00 2001
From: Myy Miouyouyou <myy@miouyouyou.fr>
Date: Thu, 19 Oct 2017 22:12:48 +0200
Subject: [PATCH 18/28] ARM: DTS: rk3288-tinker.dts: Enabling SDIO, Wireless
and Bluetooth
Adding the appropriate nodes in order to exploit the WiFi capabilities
of the board.
Since these capabilities are provided through SDIO, and the SDIO
nodes were not defined, these were added too.
These seems to depend on each other so they are added in one big
patch.
Split if necessary.
Bluetooth and uart0 (AKA Bluetooth UART) definitions were also added
in order to deal with all the wireless techs in one patch.
Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
---
arch/arm/boot/dts/rk3288-tinker.dts | 82 ++++++++++++++++++++++++++++++++++++-
1 file changed, 81 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
index 346b0d8b..c552fd95 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dts
+++ b/arch/arm/boot/dts/rk3288-tinker.dts
@@ -44,6 +44,7 @@
#include "rk3288.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/rockchip,rk808.h>
/ {
model = "Rockchip RK3288 Tinker Board";
@@ -114,6 +115,24 @@
};
};
+ /* This is essential to get SDIO devices working.
+ The Wifi depends on SDIO ! */
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 RK808_CLKOUT1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&chip_enable_h>, <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>, <&gpio4 RK_PD3 GPIO_ACTIVE_LOW>;
+ };
+
vcc_sys: vsys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
@@ -134,6 +153,28 @@
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
+
+ wireless-wlan {
+ compatible = "wlan-platdata";
+ rockchip,grf = <&grf>;
+ wifi_chip_type = "8723bs";
+ sdio_vref = <1800>;
+ WIFI,host_wake_irq = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ wireless-bluetooth {
+ compatible = "bluetooth-platdata";
+ uart_rts_gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default","rts_gpio";
+ pinctrl-0 = <&uart0_rts>;
+ pinctrl-1 = <&uart0_gpios>;
+ BT,reset_gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ BT,wake_gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+ BT,wake_host_irq = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
};
&cpu0 {
@@ -373,10 +414,30 @@
&io_domains {
status = "okay";
-
+ rockchip,grf = <&grf>;
+ wifi-supply = <&vcc_18>;
sdcard-supply = <&vccio_sd>;
};
+&sdio0 {
+ status = "okay";
+ clock-frequency = <50000000>;
+ clock-freq-min-max = <200000 50000000>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ disable-wp;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+ supports-sdio;
+
+};
+
&pinctrl {
pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
drive-strength = <8>;
@@ -422,6 +483,16 @@
};
};
+ sdio-pwrseq {
+ wifi_enable_h: wifienable-h {
+ rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ chip_enable_h: chip-enable-h {
+ rockchip,pins = <4 27 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
sdmmc {
sdmmc_bus4: sdmmc-bus4 {
rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
@@ -453,6 +524,13 @@
rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ wireless-bluetooth {
+ uart0_gpios: uart0-gpios {
+ rockchip,pins = <4 19 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
};
&pwm0 {
@@ -485,6 +563,8 @@
&uart0 {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer>, <&uart0_cts>;
};
&uart1 {
--
2.11.0