open-zwave/config/everspring/st814.xml

<!-- https://products.z-wavealliance.org/products/271 --><Product Revision="8" xmlns="https://github.com/OpenZWave/open-zwave">
  <MetaData>
    <MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/0060:0001:0006</MetaDataItem>
    <MetaDataItem name="ProductPic">images/everspring/st814.png</MetaDataItem>
    <MetaDataItem id="0001" name="ZWProductPage" type="0006">https://products.z-wavealliance.org/products/974/</MetaDataItem>
    <MetaDataItem id="0001" name="Identifier" type="0006">ST814-2</MetaDataItem>
    <MetaDataItem name="Description">The Temperature/Humidity Detector is designed to monitor the current temperature and humidity of ambient environment. The reading of temperature/humidity can be reported to you on a regular base at your disposal.  If temperature/humidity reaches set points, the detector will send alerts to associated devices for further execution. The application example will be like this , Step 1 include both ST814 and ON/OFF Z-Wave module (like AN158 or AN157, HAN01…) into a Z-wave controller, Step2 associate ST814 to the ON/OFF Z-Wave module  Step3 connect the power wire of the heater or humidifier to the ON/OFF Z-Wave module and this simple 3 step will let user easy to control the temperature or humidity of the room automatically Since sudden temperature/humidity change may cause health problems to people such as elderly or very young children, Temp./Humid. Detector provides you most up-to-date temperature and humidity reading for you to watch your family’s health.
</MetaDataItem>
    <MetaDataItem id="0001" name="FrequencyName" type="0006">U.S. / Canada / Mexico / CEPT (Europe) / Russia / CEPT (Europe) / U.S. / Canada / Mexico</MetaDataItem>
    <MetaDataItem name="ProductPage">http://www.everspring.com/ST814.aspx</MetaDataItem>
    <MetaDataItem name="Name">Temperature/Humidity Sensor</MetaDataItem>
    <ChangeLog>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="03 May 2019" revision="4">Initial Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/3/xml</Entry>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="03 May 2019" revision="5">Updated Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/271/xml</Entry>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="03 May 2019" revision="6">Updated Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/923/xml</Entry>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="03 May 2019" revision="7">Updated Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/934/xml</Entry>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="03 May 2019" revision="8">Updated Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/974/xml</Entry>
    </ChangeLog>
    <MetaDataItem name="ProductSupport">http://www.everspring.com.tw/contact-us/index.asp</MetaDataItem>
  </MetaData>
  <!-- Configuration Parameters -->
  <CommandClass id="112">
    <Value genre="config" index="1" label="Basic Set Level" max="99" min="0" type="byte" units="%" value="99">
      <Help>
				Defines the level in the Basic Set event sent to group 2 when the sensor is triggered.  Default is 99 (full brightness for a Z-Wave dimmer). 0 disables.
			</Help>
    </Value>
    <Value genre="config" index="2" label="Temperature On Trigger" max="99" min="-20" type="byte" units="degrees" value="30">
      <Help>
				Temperature level to trigger when a ON command is sent out. 99 will clear the value.
			</Help>
    </Value>
    <Value genre="config" index="3" label="Temperature Off Trigger" max="99" min="-20" type="byte" units="degrees" value="20">
      <Help>
				Temperature level to trigger when an OFF command is sent out. 99 will clear the value.
			</Help>
    </Value>
    <Value genre="config" index="4" label="Humidity On Trigger" max="99" min="20" type="byte" units="%" value="50">
      <Help>
				Humidity level to trigger when a ON command is sent out. 99 will clear the value.
			</Help>
    </Value>
    <Value genre="config" index="5" label="Humidity Off Trigger" max="99" min="20" type="byte" units="%" value="40">
      <Help>
				Humidity level to trigger when a OFF command is sent out. 99 will clear the value.
			</Help>
    </Value>
    <Value genre="config" index="6" label="Auto Report Time" max="1439" min="0" type="short" units="minutes" value="0">
      <Help>
				Sets the auto report time interval. 0 disables.
			</Help>
    </Value>
    <Value genre="config" index="7" label="Auto Report Temperature" max="70" min="0" type="byte" units="degrees" value="0">
      <Help>
				Sets the auto report temperature trigger interval. 0 disables.
			</Help>
    </Value>
    <Value genre="config" index="8" label="Auto Report Humidity" max="70" min="0" type="byte" units="%" value="0">
      <Help>
				Sets the auto report humidity trigger interval. 0 disables.
			</Help>
    </Value>
  </CommandClass>
  <!-- COMMAND_CLASS_ASSOCIATION. Groups -->
  <CommandClass id="133">
    <Associations num_groups="2">
      <Group index="1" label="Reports" max_associations="1"/>
      <Group index="2" label="Basic" max_associations="3"/>
    </Associations>
  </CommandClass>
  <CommandClass id="96">
    <Compatibility>
      <MapRootToEndpoint>true</MapRootToEndpoint>
    </Compatibility>
  </CommandClass>
</Product>