The rule included from auto.conf.cmd adds a dependency on every Kconfig
file, so these two Kconfig files do not need to be specified again here.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
The .config file may be manually edited or copied from another location.
Since genconfig.py is responsible for generating auto.conf (the Makefile
fragment) and autoconf.h (the C header) from .config, it must be run any
time .config changes, not just when running menuconfig.
Fixes: 662e631cce ("Makefile: Add initial kconfig support for each platform")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
SCOUNTEREN and SENVCFG may not be supported on certain RISC-V core,
so check the existence of these CSRs via privilege spec version to
prevent illegal instructions.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, all non-coldboot HARTs busy spin in wait_for_coldboot()
until the entire coldboot init sequence is completed.
This means:
1) On QEMU, all non-coldboot HARTs will eat host CPU time and
also slow down the coldboot HART until the entire coldboot
init sequence is completed.
2) On real HW, all non-coldboot HARTs will consume more CPU
power until the entire coldboot init sequence is completed.
To address this, wake up all non-coldboot HARTs as early as
possible in the coldboot init sequence.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
On QEMU virt machine with large number of HARTs, some of the HARTs
randomly fail to come out of wait_for_coldboot() due to one of the
following race-conditions:
1) Failing HARTs are not able to acquire the coldboot_lock and
update the coldboot_hartmask in wait_for_coldboot() before
the coldboot HART acquires the coldboot_lock and sends IPI
in wake_coldboot_harts() hence the failing HARTs never
receive IPI from the coldboot HART.
2) Failing HARTs acquire the coldbood_lock and update the
coldboot_hartmask before coldboot HART does sbi_scratch_init()
so the sbi_hartmask_set_hartid() does not update the
coldboot_hartmask on the failing HARTs hence they never
receive IPI from the coldboot HART.
To address this, use a simple busy-loop in wait_for_coldboot() for
polling on coldboot_done flag.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The address of the local scratch area is stored in each hart's mscratch
CSR. It is more efficient to read the CSR than to compute the address
from the hart ID.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The address of the local scratch area is stored in each hart's mscratch
CSR. It is more efficient to read the CSR than to compute the address
from the hart ID.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Avoid using C types and casts if sbi/sbi_byteorder.h is included in
assembly code
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add SSE callbacks registration to PMU driver in order to disable
interrupt delegation for PMU interrupts. When interrupts are
undelegated send the PMU SSE event upon LCOFIP IRQ.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The SBI SSE extension defines a set of function that can be called to
register and handle supervisor sofwtare events. This patch implements
all of the functionality defined in the specification.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This extension [1] allows to deliver events from SBI to supervisor via
a software mechanism. This extension defines events (either local or
global) which are signaled by the SBI on specific signal sources (IRQ,
exceptions, etc) and are injected to be executed in supervisor mode.
[1] https://lists.riscv.org/g/tech-prs/message/798
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Remove copy-base relocations that are no longer needed.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
All T-Head CSRs are already defined in thead/c9xx_encoding.h.
Let's reuse the values from there instead of redefining them with
a slightly different name.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Anup Patel <anup@brainfault.org>
We should store test object files list in the `libsbi-objs-y` Makefile
variable, not in `libsbitests-objs-y`. Update the documentation
correspondingly.
Since we don't use the `console_dev` static variable directly in the
`sbi_console_test` unit test anymore, remove the paragraph which says
that we do.
Fixes: 86224ec36a ("docs/writing_tests: Update tests paths")
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The sbi_trap_error() should dump state of all in-flight traps upon
failure in a nested trap so extend it accordingly.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
To be consistent with other trap handlers, pass trap context pointer
to sbi_ecall_handler().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
The trap irq handling functions no longer require regs parameter
so remove it.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
The irqchip handlers will typically not need pointer to trap registers
so remove regs parameter of sbi_irqchip_process().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
The struct sbi_trap_context already has the information needed by
sbi_illegal_insn_handler() so directly pass struct sbi_trap_context
pointer to this function.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
The struct sbi_trap_context already has the information needed by
misaligned load/store and access fault load/store handlers so directly
pass struct sbi_trap_context pointer to these functions.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Club the struct sbi_trap_regs and struct sbi_trap_info a new
struct sbi_trap_context (aka trap context) which must be saved
by low-level trap handler before calling sbi_trap_handler().
To track nested traps, the struct sbi_scratch points to the current
trap context and the trap context has pointer to pervious context
of previous trap.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
To track nested traps, the struct sbi_scratch needs a pointer the
current trap context so add trap_context pointer in struct sbi_context.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Over the years, no uses of sbi_trap_exit() have been found so remove
it and also remove related code from fw_base.S and sbi_scratch.h.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
In the only places this value is used, it duplicates mepc from
struct sbi_trap_regs.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since the tests should be moved to the lib/sbi/tests directory, the
documentation should be updated correspondingly. So, update the paths
where they have to be changed.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Move all of the SBIUnit-related code into the lib/sbi/tests directory.
Update 'Makefile' to index objects from the tests subdirectory.
I don't think creating the full separate list of Makefile variables
(libsbitests-objs-path-y, libsbitests-object-mks, etc. as it is done for
libsbiutils) is necessary for the tests because:
1) `lib/sbi/tests/objects.mk` is already indexed into
'libsbi-objects-mks' since the find expression for the libsbi-object-mks
variable looks for objects.mk files in the nested directories as well).
2) Tests are tightly coupled with the `lib/sbi/` sources, therefore it
may be reasonable to store the list of lib/sbi and lib/sbi/tests object
files together in the libsbi-objs-path-y variable.
Additionally, update relative paths in the tests where necessary.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
sbi_load/store_access_handler now tries to call platform emulators
if defined. Otherwise, redirects the fault. If the platform code
returns failure, this means the H/S/U has accessed the emulated
devices in an unexpected manner, which is very likely caused by
buggy code in H/S/U. We redirect the fault, so lower privileged
level can get notified, and act accordingly. (E.g., oops in Linux)
We let the handler truly fail if the trap was originated from M mode.
In this case, something must be very wrong and we should just fail.
Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch allows the platform to define load/store emulators. This
enables a platform to trap-and-emulate special devices or filter
access to existing physical devices.
Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch abstracts out the instruction decoding part of misaligned ld/st
fault handlers, so it can be reused by ld/st access fault handlers.
Also Added lb/lbu/sb decoding. (previously unreachable by misaligned fault)
sbi_trap_emulate_load/store is now the common handler which takes a `emu`
parameter that is responsible for emulating the misaligned or access fault.
The `emu` callback is expected to fixup the fault, and based on the return
code of `emu`, sbi_trap_emulate_load/store will:
r/wlen => the fixup is successful and regs/mepc needs to be updated.
0 => the fixup is successful, but regs/mepc should be left untouched
(this is usually used if `emu` does `sbi_trap_redirect`)
-err => failed, sbi_trap_error will be called
For now, load/store access faults are blindly redirected. It will be
enhanced in the following patches.
Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This simplifies both handlers such that when the handler needs to
redirect the original trap, it's readily available.
Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
sbi_trap_redirect now uses const pointer to `trap`.
This ensures the caller that we never change `trap` in sbi_trap_redirect.
Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The domain context management component in OpenSBI provides basic CPU
context management routines for existing OpenSBI domain. As domain
extension, it was initially designed to facilitate the suspension
and resumption of domains, enabling secure domains to efficiently
share CPU resources.
The patch also provides an addition to the OpenSBI domain to provide
updates on hart-domain assignment and declarations of contexts within
the domain.
Signed-off-by: Qingyu Shang <2931013282@sjtu.edu.cn>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Tested-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add the test suite covering some of the functions from
lib/sbi/sbi_console.c: putc, puts and printf. The test covers a variety
of format specifiers for printf and different strings and characters for
putc and puts.
In order to do that, the test "mocks" the sbi_console_device structure
by setting the 'console_dev' variable to the virtual console.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Add test suite covering all of the functions from lib/sbi/sbi_bitmap.c:
__bitmap_and, __bitmap_or and __bitmap_xor.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
This patch introduces all of the SBIUnit macros and functions which
can be used during the test development process. Also, it defines
the 'run_all_tests' function, which is being called during the
'init_coldboot' right after printing the boot hart information.
Also, add the CONFIG_SBIUNIT Kconfig entry in order to be able to
turn the tests on and off. When the CONFIG_SBIUNIT is disabled,
the tests and all related code is excluded completely on the
compilation stage.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
This patch contains the documentation for SBIUnit. It describes:
- What is SBIUnit
- Simple test writing scenario
- How we can cover static functions
- How we can "mock" structures in order to test the functions which
operate on them
- SBIUnit API Reference
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
The same detection was done twice when setting mtvec and trap_exit.
Merging can reduce code size.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Added exception handling for compressed instructions C.LHU, C.LH, and
C.SH from the zcb extension to the sbi_misaligned_ldst library.
Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Smcsrind allows generic indirect CSR access mechanism while
Smcdeleg allows delegating hpmcounters in Supervisor mode.
Enable both extensions and set the appropriate bits in mstateen
and menvcfg.
Co-developed-by: Kaiwen Xue <kaiwenxue1@gmail.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Hart state should change back to hart stop when hsm_device_hart_start()
or sbi_ipi_raw_send() fails to perform hart start.
Signed-off-by: Joshua Yeong <joshua.yeong@starfivetech.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Adding relocatable address brings new configuration options for jump
and payload firmwares. Describe these new options in documentation.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since jump and payload firmware support relocatable address, make
general platform use runtime relocatable address.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The fw_payload.bin has the same issue as described in previous patch.
But only FW_PAYLOAD_FDT_ADDR is affected.
Add FW_PAYLOAD_FDT_OFFSET to identify relocatable payload fdt address.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
