because delete linux cmdline cause eth0 don't work, it should work on chain_mode=1, so compromise to set bootargs in uboot
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
The issue:
Error: You must add new CONFIG options using Kconfig
The following new ad-hoc CONFIG options were detected:
CONFIG_STARFIVE_EEPROM_ATOM1_PSTR
CONFIG_STARFIVE_EEPROM_ATOM1_PSTR_SIZE
CONFIG_STARFIVE_EEPROM_ATOM1_SN_OFFSET
CONFIG_STARFIVE_EEPROM_ATOM1_VSTR
CONFIG_STARFIVE_EEPROM_ATOM1_VSTR_SIZE
CONFIG_STARFIVE_EEPROM_HATS_SIZE_MAX
CONFIG_STARFIVE_EEPROM_WP_OFFSET
Signed-off-by: Som.Qin <som.qin@starfivetech.com>
The VisionFive dts is base on Starlight dts, and the difference of
rst gpio, eeprom and gmac should be applied.
Signed-off-by: Som.Qin <som.qin@starfivetech.com>
This patch should be removed, once we can do GPIO pin init
in secondboot or ddrinit
Include:
starfive: Add init GPIO for ALSA audio framework
starfive: remove useless gpio operation
Signed-off-by: sw.multimedia <sw.multimedia@starfivetech.com>
Signed-off-by: michael.yan <michael.yan@starfivetech.com>
Signed-off-by: andy.hu <andy.hu@starfivetech.com>
This patch is using internal RAM to improve performance
（avoid flushing L2 cache): Modify designware driver by:
1, Modify gtxclk configuration by phydev->speed
2, Add Preseted mem support for mac descrtables and buffs
3, disable DMA memory range check when building for JH7100
This patch reverses some part of change in:
commit eac6e0b797
Author: Simon Glass <sjg@chromium.org>
Date: Fri Sep 24 18:30:17 2021 -0600
efi_loader: Drop code that doesn't work with driver model
...
Since JH7100 ETH driver haven't supported DM yet.
Signed-off-by: SW Multimedia <sw.multimedia@starfivetech.com>
Signed-off-by: Andy Hu <andy.hu@starfivetech.com>
Signed-off-by: David Li <david.li@starfivetech.com>
Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
Signed-off-by: Curry Zhang <curry.zhang@starfivetech.com>
1, ccache
2, mmc
This patch adds the necessary info for mmc driver:
bus-width = <4>;
max-frequency = <?0000000>;
3, uart0(console)
4, SPI Nor Flash
5, Switch dtb to linux dts
This patch adds StarFive JH7100 main support, including Starlight and EVB
support, ported from StarFive HiFive_U-Boot REPO.
The original authors are
Bo Li <bo.li@starfivetech.com>
JieQin Chen <Jessica.Chen@starfivetech.com>
Huan Feng <huan.feng@starfivetech.com>
Jack Zhu <jack.zhu@starfivetech.com>
Jianlong Huang <jianlong.huang@starfivetech.com>
Ke Zhu <ke.zhu@starfivetech.com>
Micheal Zhu <michael.zhu@starfivetech.com>
Samin Guo <samin.guo@starfivetech.com>
Yanhong Wang <yanhong.wang@starfivetech.com>
Yiming Li <yiming.li@starfivetech.com>
Note:
1, disable BTRFS(will trigger a link error with *some* RV64 GCC)
But RV64 GCC on Fedora works well with enabling BTRFS.
BTRFS will select ZSTD which will trigger a link error with
*some* RV64 GCC:
---
riscv64-unknown-linux-gnu-ld.bfd: /usr/lib/gcc/riscv64-unknown-linux-gnu/11.2.0/libgcc.a(_clzsi2.o): can't link double-float modules with soft-float modules
riscv64-unknown-linux-gnu-ld.bfd: failed to merge target specific data of file /usr/lib/gcc/riscv64-unknown-linux-gnu/11.2.0/libgcc.a(_clzsi2.o)
riscv64-unknown-linux-gnu-ld.bfd: /usr/lib/gcc/riscv64-unknown-linux-gnu/11.2.0/libgcc.a(_clz.o): can't link double-float modules with soft-float modules
riscv64-unknown-linux-gnu-ld.bfd: failed to merge target specific data of file /usr/lib/gcc/riscv64-unknown-linux-gnu/11.2.0/libgcc.a(_clz.o)
make: *** [Makefile:1787: u-boot] Error 1
---
2, enable OF_SEPARATE:
This is required so that openSBI can add itself to /reserved-memory, and
let EFI know about it.
By Andreas Schwab <schwab@suse.de>
3, Set default fdtfile name
By Andreas Schwab <schwab@suse.de>
This driver ported from NS16550 Serial Port driver, It is a simplified
version of drivers/serial/ns16550.c
We may can merge it to ns16550 later.
Signed-off-by: Wei Fu <wefu@redhat.com>
This patch fixs parse_numeric_param issue on some platfrom which has
different sizes of int and long, like riscv64.
On riscv64, int is 4 bytes, but long is 8 bytes.
on this situation:
ulong addr = parse_numeric_param(argv[index]);
if argv[index] is "0x80000000", this "ulong addr" will be
0xffffffff80000000.
Signed-off-by: Jianlong.Huang <jianlong.huang@starfivetech.com>
Co-developed-by: Wei Fu <wefu@redhat.com>
Signed-off-by: Wei Fu <wefu@redhat.com>
The changes introduced with commit 6337d53fdf ("arm: dts: sync am33xx
with Linux 5.9-rc7") prevent the PDU001 from operating correctly.
This patch fixes the configuration of the pin multiplexer and uart3.
Signed-off-by: Felix Brack <fb@ltec.ch>
After replacing of include/config/auto.conf sourcing with
extraction of CONFIG_LOCALVERSION, resulting version string
contains quotes around localversion part which are always
present in auto.conf (even if localversion is empty).
This patch fixes this script to remove quotes.
Signed-off-by: Nikita Maslov <wkernelteam@gmail.com>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The pstore command tries to create a reserved-memory node but fails if
it is already present with:
Add 'reserved-memory' node failed: FDT_ERR_EXISTS
This patch creates the node only if it does not exist and adapts the reg
values sizes depending on already present #address-cells and #size-cells
values.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Documentation:
* mkeficapsule man-page
UEFI changes:
* add support for signing images to mkeficapsule
* add support for user define capsule GUID
* adjust unit tests for capsules
* fix UEFI image signature validation in case of multiple signatures
-----BEGIN PGP SIGNATURE-----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=AAdJ
-----END PGP SIGNATURE-----
Merge tag 'efi-2022-04-rc2-4' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request for efi-2022-04-rc2-4
Documentation:
* mkeficapsule man-page
UEFI changes:
* add support for signing images to mkeficapsule
* add support for user define capsule GUID
* adjust unit tests for capsules
* fix UEFI image signature validation in case of multiple signatures
The previous patch is changing U-Boot's behavior wrt certificate based
binary authentication. Specifically an image who's digest of a
certificate is found in dbx is now rejected. Fix the test accordingly
and add another one testing signatures in reverse order
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The EFI spec allows for images to carry multiple signatures. Currently
we don't adhere to the verification process for such images.
The spec says:
"Multiple signatures are allowed to exist in the binary's certificate
table (as per PE/COFF Section "Attribute Certificate Table"). Only one
hash or signature is required to be present in db in order to pass
validation, so long as neither the SHA-256 hash of the binary nor any
present signature is reflected in dbx."
With our current implementation signing the image with two certificates
and inserting both of them in db and one of them dbx doesn't always reject
the image. The rejection depends on the order that the image was signed
and the order the certificates are read (and checked) in db.
While at it move the sha256 hash verification outside the signature
checking loop, since it only needs to run once per image and get simplify
the logic for authenticating an unsigned imahe using sha256 hashes.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Before the capsule authentication is supported, this test script works
correctly, but with the feature enabled, most tests will fail due to
unsigned capsules.
So check the results depending on CAPSULE_AUTHENTICATE or not.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
This test scenario tests a new feature of mkeficapsule, "--guid" option,
which allows us to specify FMP driver's guid explicitly at the command
line.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
